Hey All,
I'm running Mid note v2.0 (ICS based ROM) and have CPUspy installed and it tells me that my highest clock speed is 1.2GHz. Correct me if I'm wrong but isn't our N7000 notes supposed to be 1.4GHz?
I understand that ICS kernels can't be over locked at this stage but shouldn't my note be running at 1.4GHz when necessary?
Any insight would be greatly appreciated.
Sent from my GT-N7000 using XDA App
1) Its a leak for a different device.
2) The kernel controls the speed the device is allowed to run
Once sources are available, things will change.
But if you had searched and read a bit, you would have known this already...
Thank you for your response. I actually did research for this information and described what i did find but I thought I'd ask the question since this is the Q&A section of the N7000/i9220's since I couldn't find the exact answer I was seeking.
I do understand what a kernel does as I "read" up on it and I do know that the ICS leaks are from the i9220 as I "read" that too.
So please keep your sarcasm to yourself as I was merely just asking the community for insight on this matter but if you had "read" my question you'd already know that.
Sent from my GT-N7000 using XDA App
The version of the Note that the ICS leak was for is locked at 1.2Ghz.
joshnichols189 said:
The version of the Note that the ICS leak was for is locked at 1.2Ghz.
Click to expand...
Click to collapse
only locked because of the kernel, once the sources are available it will then be able to run at full speed
rocket team rom
what abt the rocket team rom i guess it is not based on the Chinese leak so the cpu will be 1.4 instead
ahmad_nece said:
what abt the rocket team rom i guess it is not based on the Chinese leak so the cpu will be 1.4 instead
Click to expand...
Click to collapse
no its 1.2 aswell, its the KERNEL not the rom and until, oh i give up trying to explain, go search
The kernel is from China leak so it is 1.2ghz.unless kernel developer of xda here provide new custom kernel which with custom CPU scaling.
Sent from my GT-N7000 using Tapatalk
peoples_flip said:
Hey All,
I'm running Mid note v2.0 (ICS based ROM) and have CPUspy installed and it tells me that my highest clock speed is 1.2GHz. Correct me if I'm wrong but isn't our N7000 notes supposed to be 1.4GHz?
I understand that ICS kernels can't be over locked at this stage but shouldn't my note be running at 1.4GHz when necessary?
Any insight would be greatly appreciated.
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
It's underclocked, wait for an update.
Related
Based off of the base Samsung GT-I7510 Source.
Works with Stock 3.1 and TW UX ROMS
I am not at all responsible for what you do to your tab by installing and using this.
You must have ROOT! Also clearing cache and dalvik cache I've found does wonders after flashing.. #justsayin
07/28/2011
Added 1.504ghz for more stability
Changed voltages for stability
Fixed SETCPU Bug
Fixed Voodoo sound.. my bad..
Max GHz is automatically set to 1.2GHz to avoid stability issues. You can set them in SetCPU to whatever you like.
07/27/2011
Rebased off of pershoots but with my modifications... more to come..
360 controller should work..
Reports are good with the UX TW ROMS...
Removed GPU overclocking until I can see if it is actually helping..
Fixed charging and PC mounting issue..
Runs a lot smoother with the Ubuntu port so far
07/22/2011 Update
Included all of my modules in init.rc which means all the modules autostart and no need to use terminal to start by hand.
Fixed some install script issues.
Old update:
Project Voodoo's Voodoo sound v10 thanks to supercurio (download voodoo control app from market)
CIFS/NTFS
We now haz 1.6ghz OC! :_con: :gasp:
Compiled and included the XBox 360 controller module... Haven't tested due to no USB Dongle yet..
Lowmemory killer tweaks
Use the Latest SETCPU to change Voltages and Overclocking. It now supports full voltage control.. Im currently on 2.2.4. Available HERE.
Updated to the .4 patch.. mutch smoother..
Todo:
Suggestions??
Special thanks to:
Khasmek for dealing with my ranting...
Xoomdev also for dealing with my ranting...
R2doesinc also for dealing with my ranting..
Birdman for his words of wisdom...
Drod2169 for helping me debug voltage control
Captainkrtek for dealing with my ranting also...
To all of my testers.. couldn't do it without you.
If you would like to donate for my work and to the OMFGB/OMGB build box which I own and run click HERE
Forgot to post my githib link.... I apologize...
Http://www.githib.com/poitee
DO NOT FLASH with rom manager.. Reported issues.
Get it HERE
E.p.I.c.. got a 2880 quadrant.
Sent from my GT-P7510 using XDA Premium App
Is this compatible with 3.1 w/Touchwiz?
Testing now. Not sure if UV works. Is it suppose to? I get the prompt of selecting states not supported buttons inactive or not supported when I open up voltage control. Thanks for the kernel.
Great work !, any chance for pimpmycpu support?
I'm starting to think I got the runt of the litter as far as the cpu goes...
Hard reset @ 1GHz for me unfortunately...but voodoo sounded great until the tab locked up heh.
Source? GPL?
Good to see another Dev for the 10.1. Will try this out later.
fit333 said:
E.p.I.c.. got a 2880 quadrant.
Sent from my GT-P7510 using XDA Premium App
Click to expand...
Click to collapse
I'm getting 2660 on a "stock" touchwiz
I love to see 4k quadrant score like xoom
So it is working on TouchWiz?
Lot of lag, unresponsiveness for me on touchwiz rom :-( ..... And I didn't change any setting, just flashed the kernel.
Sent from my GT-I9100 using XDA Premium App
Working on Touchwiz or not? Anybody? Ill take the leap if nobody else has...
Sent from the best phone on the planet (SGS2) running the best ROM on the planet (Cognition S2)!
Did you do a full wipe? I had the same with another Oct kernel but I wiped and its good now.
Sent from the best phone on the planet (SGS2) running the best ROM on the planet (Cognition S2)!
Works great.. Good work.. But dosent seem to make it to 1.6ghz. Setcpu goes to 1600mhz but the scaling still says 1400mhz?
kirdroid said:
Lot of lag, unresponsiveness for me on touchwiz rom :-( ..... And I didn't change any setting, just flashed the kernel.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
You need to flash a pershoot kernel that has a ramdisk image before you may flash this on Touchwiz (last one was posted here http://droidbasement.com/db-blog/?p=2160). Flash the 071311 kernel, then flash this on top, should work.
Working here on TouchWiz. However, im not getting the very high quadrants scores. Best I go so far was 1800. Possibly a wipe and install will work.
SellswordShev said:
You need to flash a pershoot kernel that has a ramdisk image before you may flash this on Touchwiz (last one was posted here http://droidbasement.com/db-blog/?p=2160). Flash the 071311 kernel, then flash this on top, should work.
Click to expand...
Click to collapse
Hmm but what about the statenent: "This will not work for TouchWiz UX" ??
FrezoreR said:
Hmm but what about the statenent: "This will not work for TouchWiz UX" ??
Click to expand...
Click to collapse
It's just pershoot's official stance. He does not want to provide support for it, but if you look over his release thread you will see him explain how to get it to work on touchwiz (the short version is in my post above)
The highest quad score I got was 1939 maxed out...
Sent from the best phone on the planet (SGS2) running the best ROM on the planet (Cognition S2)!
I'd like to try this as well on Touchwiz but I am waiting for a definitive confirmation that it works well? I assume we just install the zip file from recovery? Also if it doesn't work can someone outline the process for going back, do I just re-install the Touchwiz zip package?
Thanks,
Richard
Hi, everyone I wold try to ask in development about this but I can`t post there since I`m a noob here, so here goes....
I installed Prime HD 9.0 (and the addon required for stock) I use stock kernel. The rom runs great . The only problem is that in cyanogen mod>performance i Try to change the frequency to higher than 600mhz and no options appear. So does anyone know why is that..?!
I tried to search for a similar question in the forum but nothing came up.
Don't ask questions in the dev section.
You need to install the overclock module to overclock.
Sent from my X8 to your screen
Ok, thanks I taught it`s a bug (that`s why I`d post in dev) because the other roms I`ve tried came with overclock. But this one obviously is not like that.
FurryTauren said:
Hi, everyone I wold try to ask in development about this but I can`t post there since I`m a noob here, so here goes....
I installed Prime HD 9.0 (and the addon required for stock) I use stock kernel. The rom runs great . The only problem is that in cyanogen mod>performance i Try to change the frequency to higher than 600mhz and no options appear. So does anyone know why is that..?!
I tried to search for a similar question in the forum but nothing came up.
Click to expand...
Click to collapse
if ur on stock kernel,check this
http://forum.xda-developers.com/showthread.php?t=1020313
Thanks! I checked it last night now the phone is clocked an works even better.. Now to do something about battery live and I can keep this Rom forever.....
overclocking in prime hd
kirmada said:
if ur on stock kernel,check this
http://forum.xda-developers.com/showthread.php?t=1020313
Click to expand...
Click to collapse
i m using prime hd rom (stock) and i want to overclock .can u pls telll me which overclocking version should i use for x8
x8oc.ko
Sent from my X8 using xda app-developers app
Hi. If the same thread is already exists, please forgive me. Been trying to find similar thread for about 3-4 pages here, but none found.
If no, well, can anyone here suggest the best kernel for ICS based ROM for our IncS in term of performance and battery life. Thanks in advance.
XS-ICS.
What's the benefit of this kernel over another? I am sorry I am also new to this. If you can just provide some high level overview
Sent from my HTC Incredible S using xda app-developers app
@di said:
What's the benefit of this kernel over another? I am sorry I am also new to this. If you can just provide some high level overview
Click to expand...
Click to collapse
Hi. From my point of view, each kernel has it's own advantages and disadvantages in terms of performance, battery life and etc. For custom kernel like X2 ICS (http://forum.xda-developers.com/showthread.php?t=1851121), you can overclock your IncS to higher CPU speed but PLEASE bare in mind, even though our device is the same, but that doesn't mean the optimized value to overclock is the same. My suggestion, please look carefully for pro n cons for each kernel in the forum because some kernel is not supported for certain ROMs. For me, I just flashed ICS Sense G11 v2.0.1 (http://forum.xda-developers.com/showthread.php?t=1887379) and it went smoothly with my Android Revolution HD 3.01 ROM.
I have used a couple of custom ICS ROMs (Nik's and IceCold) and I find that the following gives the best choice of governors, clocking variability and battery life.
Choosing the right governor and clock speed will of course impact on your performance.
Also recommend XS ICS 2.2... http://forum.xda-developers.com/showthread.php?t=1851121
haniffxs said:
Hi. If the same thread is already exists, please forgive me. Been trying to find similar thread for about 3-4 pages here, but none found.
If no, well, can anyone here suggest the best kernel for ICS based ROM for our IncS in term of performance and battery life. Thanks in advance.
Click to expand...
Click to collapse
ICS sense version G 11 V 2.02 is also cool.... you can try that also...I had flashed this kernel along with the new radio...believe my battery strength and smoothness has improved drastically.... my phone used to get heated up like anything but after flashing these 2, it is so cool....
http://forum.xda-developers.com/showthread.php?t=1887379
@di said:
ICS sense version G 11 V 2.02 is also cool.... you can try that also...I had flashed this kernel along with the new radio...believe my battery strength and smoothness has improved drastically.... my phone used to get heated up like anything but after flashing these 2, it is so cool....
http://forum.xda-developers.com/showthread.php?t=1887379
Click to expand...
Click to collapse
im using nik project x 4.1 with XS ICS 2.2 kernel.
how do i undervolt the system, as i cant see undevolt in setcpu
andrumon said:
im using nik project x 4.1 with XS ICS 2.2 kernel.
how do i undervolt the system, as i cant see undevolt in setcpu
Click to expand...
Click to collapse
Try using trickstermod (in themes and apps of incs)
Hello!
I am on .PARANOIDANDROID 3.69. Can someone please tell me how acn I activate Blink Light Notification on my cell.
Thank you.
go4saket said:
Hello!
I am on .PARANOIDANDROID 3.69. Can someone please tell me how acn I activate Blink Light Notification on my cell.
Thank you.
Click to expand...
Click to collapse
You can't, unless you decide to figure out how to effectively code it into the cm10.1 kernel.
This doesn't exist on any Jellybean kernels for this device.
Sorry no blinkie blinkie for joo
It's always so much harder when you have to try (David Gray).
You can use flash alerts with an app in play store called flash alerts if i remember well...
Sent from my GT-N7000 using xda premium
dnlmihaila said:
You can use flash alerts with an app in play store called flash alerts if i remember well...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Flash alerts has nothing to do with BLN.
Sent from my Samsung Galaxy SVII using Tapatalk 6 Beta
Oh man.. i have read a lots of pages here now in search of a stock Jelly Bean rom/kernel with BLN . I really want that on my Note.
But i can´t find anything up to date.
I´m now on Asylum 4.3 rom and i love it. But there is no BLN for 4.3 as far as i know.
Pure stock rom from Kies was not to my liking, buggy and slow.
So i´m asking here instead of making a new thread and hope someone will help me.
Is there a rom (I would like to try a stock TW rom that are smooth but i can go for others) that has these things?
1. BLN
2. Stable
3. Added tweaks and features. Maby even from Note 2.
4. More fluid than pure stock rom. But i would most definitely try a Kernel that has BLN on stock TW.
I´m not picky, but i prefer an answer from someone that know for sure that it´s working.
Kernel and rom together and BLN.
Thanks in advanced for answers.
//Tesla
Ps. I´m still new to my Note and i am learning.
Please don´t tell me to just "read" Link what i should read then
Tesla said:
Oh man.. i have read a lots of pages here now in search of a stock Jelly Bean rom/kernel with BLN . I really want that on my Note.
But i can´t find anything up to date.
I´m now on Asylum 4.3 rom and i love it. But there is no BLN for 4.3 as far as i know.
Pure stock rom from Kies was not to my liking, buggy and slow.
So i´m asking here instead of making a new thread and hope someone will help me.
Is there a rom (I would like to try a stock TW rom that are smooth but i can go for others) that has these things?
1. BLN
2. Stable
3. Added tweaks and features. Maby even from Note 2.
4. More fluid than pure stock rom. But i would most definitely try a Kernel that has BLN on stock TW.
I´m not picky, but i prefer an answer from someone that know for sure that it´s working.
Kernel and rom together and BLN.
Thanks in advanced for answers.
//Tesla
Ps. I´m still new to my Note and i am learning.
Please don´t tell me to just "read" Link what i should read then
Click to expand...
Click to collapse
There is no JB ROM or kernel with bln for this device.
Sent from my SCH-I545 using Tapatalk 2
You sure? Only GB and ICS :/
Do you know why that is?
Can you recommend an GB and ICS with no brick bug that has BLN?
Btw.. Have you tried GB and ICS on our note?
How are they?
Tesla said:
You sure? Only GB and ICS :/
Do you know why that is?
Can you recommend an GB and ICS with no brick bug that has BLN?
Btw.. Have you tried GB and ICS on our note?
How are they?
Click to expand...
Click to collapse
BLN, unless the device has been designed with this in mind, is very battery wasting. You can try the app Dynamic Notifications, since we get a Amoled screen, it's not so battery intensive:
https://play.google.com/store/apps/details?id=com.greatbytes.activenotifications
Tesla said:
You sure? Only GB and ICS :/
Do you know why that is?
Can you recommend an GB and ICS with no brick bug that has BLN?
Btw.. Have you tried GB and ICS on our note?
How are they?
Click to expand...
Click to collapse
GB with abyss kernel was great
And yes I'm positive.
Sent from my SCH-I545 using Tapatalk 2
HI...
i wanna know if gpu overclocking is possible for our device????? the one like Kerner Tuner for HTC EVO 3D????
i searched over internet and found out this : http://rootzwiki.com/topic/27167-ke...-last-senseful-edition-aospsense-caf-drivers/
but it didnt mention whether it is supported for jb roms or not????
mnomaanw said:
HI...
i wanna know if gpu overclocking is possible for our device????? the one like Kerner Tuner for HTC EVO 3D????
i searched over internet and found out this : http://rootzwiki.com/topic/27167-ke...-last-senseful-edition-aospsense-caf-drivers/
but it didnt mention whether it is supported for jb roms or not????
Click to expand...
Click to collapse
Of course. Any rom made by me or albino has that option. Some other kernels may have it but it all depends.
i am currently on [ROM] CM10.1 AOSP 4.2.2 Jellybean [KANG] [Aug-6] by albinoman887.....
GPU OC is unsupported in kernel tuner.....also i cant overclock cpu thru "Performance".....and i am looking for a kernel update supporting jb 4.2.2
i tried this http://forum.xda-developers.com/showthread.php?t=2156949.............it said it supported jb but i guess it was ony for 4.1.x
mnomaanw said:
i am currently on [ROM] CM10.1 AOSP 4.2.2 Jellybean [KANG] [Aug-6] by albinoman887.....
GPU OC is unsupported in kernel tuner.....also i cant overclock cpu thru "Performance".....and i am looking for a kernel update supporting jb 4.2.2
i tried this http://forum.xda-developers.com/showthread.php?t=2156949.............it said it supported jb but i guess it was ony for 4.1.x
Click to expand...
Click to collapse
If you read there are instructions on how to edit the Kernel in the page you get the ROM from.
mnomaanw said:
i am currently on [ROM] CM10.1 AOSP 4.2.2 Jellybean [KANG] [Aug-6] by albinoman887.....
GPU OC is unsupported in kernel tuner.....also i cant overclock cpu thru "Performance".....and i am looking for a kernel update supporting jb 4.2.2
i tried this http://forum.xda-developers.com/showthread.php?t=2156949.............it said it supported jb but i guess it was ony for 4.1.x
Click to expand...
Click to collapse
The question is why...
Overclocking the GPU does almost nothing in terms of performance... No faster in UI in my experience... And... No better in benchmark (I know they mean nothing)
It actually just drains battery IMHO...
Sent from my Vivid 4G using Tapatalk 4
rignfool said:
The question is why...
Overclocking the GPU does almost nothing in terms of performance... No faster in UI in my experience... And... No better in benchmark (I know they mean nothing)
It actually just drains battery IMHO...
Sent from my Vivid 4G using Tapatalk 4
Click to expand...
Click to collapse
Yeah thats what im telling to my friend (who posted the OP using my account) ...thank god you answered. Now he will stop bi***ing
Sent from my Evo 3D CDMA using Tapatalk 4
mnomaanw said:
HI...
i wanna know if gpu overclocking is possible for our device????? the one like Kerner Tuner for HTC EVO 3D????
i searched over internet and found out this : http://rootzwiki.com/topic/27167-ke...-last-senseful-edition-aospsense-caf-drivers/
but it didnt mention whether it is supported for jb roms or not????
Click to expand...
Click to collapse
Almost cook room has overclocking, you can set in Performance settings (with CM room) or venom tweak(if using venom room).
For me, if no using some big application, I often set max CPU freq. <1200 htz and min <384htz. I realized when set max CPU > 1250 htz, my device is getting hotter, religion battery
hungpd00532 said:
Almost cook room has overclocking, you can set in Performance settings (with CM room) or venom tweak(if using venom room).
For me, if no using some big application, I often set max CPU freq. <1200 htz and min <384htz. I realized when set max CPU > 1250 htz, my device is getting hotter, religion battery
Click to expand...
Click to collapse
You're talking CPU...
He wanted to know about GPU
Sent from my Vivid 4G using Tapatalk 4