Related
I followed these instructions to root my new galaxy s, after following them and getting to stage where odin 3 v1.85 reboots my phone my dog pulled the usb cord out of the computer and now it seems to have stalled the phone at the samsung s screen, can anyone help?
http://forum.xda-developers.com/showthread.php?t=1056334
phone is only 3 days old so really keen to fix.
Can you get into download mode?
Sent from gt i9000 insanity 8.5/fugumod
yes can access d/l mode
<ID:0/023> Added!!
<ID:0/023> Odin v.3 engine (ID:23)..
<ID:0/023> File analysis..
<ID:0/023> SetupConnection..
<ID:0/023> Initialzation..
<ID:0/023> Get PIT for mapping..
<ID:0/023> Firmware update start..
<ID:0/023> zImage
<ID:0/023> NAND Write Start!!
<ID:0/023> RQT_CLOSE !!
<ID:0/023> RES OK !!
<ID:0/023> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/023> Removed!!
Odin log.
If you have a Samsung Galaxy S...
Then why in the world are you following the rooting procedure of the Samsung Galaxy S 2?
You will have to flash your phone with a firmware package now.
Try re running the process minus dog and see what happens, can take a while to reboot be patient
Sent from gt i9000 insanity 8.5/fugumod
electrotune1200 said:
If you have a Samsung Galaxy S...
Then why in the world are you following the rooting procedure of the Samsung Galaxy S 2?
You will have to flash your phone with a firmware package now.
Click to expand...
Click to collapse
Yep that could explain it, fail on my behalf for not reading properly.
Cancel my last...wrong root muppet I didnt check that link, makes me muppet too!
Sent from gt i9000 insanity 8.5/fugumod
For your sake....
Please, pay close attention to what you are flashing. You are lucky this time.
If you are unsure of what to flash, or what you are flashing, don't be affraid to ask.
ok so can someone give me a link for the correct process, also Kies wont connect to my device at the moment.
What region are you in?
Do you want 2.3.3?
Or 2.2.1?
Of course Kies won't connect, you're lucky the phone is turning on.
Download this too. Odin v1.82
http://www.megaupload.com/?d=Y7QPNEUZ
Im in Australia, Perth to be exact, and im keen to run 2.3.3
Alright sweet...
http://www.multiupload.com/E4EZ90ID7Y
2.3.3 Gingerbread, latest UK official release.
Are you with Optus?
Im with Telstra. D/l link now have ivivd d/l manger?
Ok....
I was just asking if you were with Optus because I have an Optus csc you could flash, but no worries.
After the flash, you will need to edit your apn settings manually to get a data connection. We'll worry about that later.
In the Odin package I had you download, is there a 512 pit file in the folder?
Did you click on the blue "direct download" button?
s1_odin_20100512 is the file
re d/l the second link
have phone in d/l mode
Ok...
Put pooch in another room. Lock the door if you have to.
Make sure phone is completely charged.
Open up Odin.
Select the pit tab. Go to the root of the Odin folder and select the 512 pit file. (The file you posted the details of)
Now select PDA tab in Odin, and navigate to the JVO ROM folder you downloaded. Select the PDA file.
Same for the PHONE, and CSC tab. Make sure you put the right files in the right slots.
Make sure re-partition in Odin is ticked.
Connect Phone to PC, when Odin recognises the phone a yellow box will appear. Press start.
Hi,
I managed to brick my Samsung Galaxy S I9000M.
Was locked on Virgin network (Canada) and I was trying to root the phone and then unlock it.
But something didn;t work properly (or I made a mistake) and now the phone keeps rebooting. I can go into Download mode but nothing more.
This is what I did:
1) I installed Odin 1.85
2) I started ODIN as admin, I pressed on PDA and then I selected a zip folder called
"CF-Root-XX_OXA_JVO-v3.2-CWM3RFS"
3) This is what ODIN was showing:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
5) So after waiting 5-6 minutes (in this time the phone was rebooting up to the Samsung logo) I turned off the phone and I have tried to start the device. But is not starting anymore, it keeps rebooing.
Now I don't know what to do to fix it.I know that I made a big mistake, I was not supposed to do something without knowing what I'm doing...But now it's too late, I have to fix it.
Note: The phone was running Android 2.3 (Gingerbread)
if its in boot loop then look like it's only softwoer brick.
so if you can get in to download mode by 3 bouten combination greate you can try to reflash (I will try all so to redownloading the files)
if not than you must find a JIG or some one with a JIG to get in to download mode and reflash.
The version of CF-ROOT you selected is not compatible with the version of GB (UGKG3?) that was on your phone.
If your phone had UGKG3 installed, there are very few rooted kernels available for it.
Black Rose said:
The version of CF-ROOT you selected is not compatible with the version of GB (UGKG3?) that was on your phone.
If your phone had UGKG3 installed, there are very few rooted kernels available for it.
Click to expand...
Click to collapse
Is the latest speed mod kernel compatible?
Sent from my GT-I9000 using xda premium
Yes, I can go into download mode.
How can I reflash the phone ? Which kernel should I use ?
Sorry but I'm new in this.
If you give me some links that will be great.
I don't want to aggravate the situation .
If the OP has/had UGKG3 installed, I have found that to be the oddest ROM I have used to date on my phone.
It does a lot of things differently.
I made another post on here where I attached a basic rooted kernel for the UGKG3 ROM. Let me go find it and link to it.
Again, this is assuming it was UGKG3. Ma Bell has only released one GB ROM for the GT-i9000m, so I think it's a safe bet that's what the OP was running on his Virgin branded phone.
EDIT: Here it is: http://forum.xda-developers.com/showpost.php?p=21655532&postcount=492
This will give you a basic rooted kernel, no CWM or anything else, just root.
You'll also need to download Superuser from the Market.
Thank you.
Now how should I install that kernel?
I suppose that after I reflash the phone it will start normally and then I can go to the Android market and install Superuser from there?
Is there a link with instructions (Step by Step guide)?
Sorry,but I dont have too much experience with this.
Thanks a lot!
I found this in the General thread, it has links and step-by-step instructions:
http://forum.xda-developers.com/showthread.php?t=1379650
Hope it helps
IntelQC said:
Thank you.
Now how should I install that kernel?
I suppose that after I reflash the phone it will start normally and then I can go to the Android market and install Superuser from there?
Is there a link with instructions (Step by Step guide)?
Sorry,but I dont have too much experience with this.
Thanks a lot!
Click to expand...
Click to collapse
Open Odin, select the zImage.tar file as PDA. DO NOT CHANGE ANY OTHER SETTINGS.
Connect your phone to your computer and wait for the ID:COM box to turn yellow.
Press Start.
Your phone will reboot and it should start normally.
Black Rose said:
Open Odin, select the zImage.tar file as PDA. DO NOT CHANGE ANY OTHER SETTINGS.
Connect your phone to your computer and wait for the ID:COM box to turn yellow.
Press Start.
Your phone will reboot and it should start normally.
Click to expand...
Click to collapse
Thank you very much !!!
My phone is fine now. It's rooted and I managed to unlock it using Galaxy_S Unlock + SuperBox from the market.
Thanks a lot .
This is what my phone shows now:
Firmware: 2.3.3
Baseband version: I9000UGKG3
Kernel version: [email protected]#2
Build number: GINGERBREAD.GKG3
Great, glad you got your phone working again.
Hi,
I've got here a bricked galaxy s from a friend of my. he tried to root the galaxy s without knowing how.
But the problem is.. I don't know which firmware he had. So i don't know which .tar file i need for odin3 to restore.
Can i track somehow the firmware? its an europe version with 2.2 he said. Or is there an other way to restore this phone?
When i startup the phone it hangs at the galaxy s logo. I can enter download mode
Use Sammobile.com
You'll need to make a login first and then just follow the click to the files..
There are also stock packages in the general section such as cf-root, to gain root access. And there are other stock firmware threads there.
Try only flashing the code.tar file, I think that's where the kernal is but best to confirm that somewhere. Otherwise just flash the whole stock package.
i bricked my galaxy and i recomand a stock package and from that you can root and you can change to a custom rom if he wants that...
Talon26 said:
Use Sammobile.com
You'll need to make a login first and then just follow the click to the files..
There are also stock packages in the general section such as cf-root, to gain root access. And there are other stock firmware threads there.
Try only flashing the code.tar file, I think that's where the kernal is but best to confirm that somewhere. Otherwise just flash the whole stock package.
Click to expand...
Click to collapse
can you be more specific how to get the right firmware? Do i need to go to SAMFIT? or SAMSUNG LETTER CODE? i have no idea how to find it
Ok, sorry i thought Sammobile.com had complete instructions on how to find the firmware for you like it used to, but I haven't used it in a while..
I don't remember what all those codes mean and tbh it doesn't matter too much. The main thing is to find your CSC code. This will be the factor that would usually cause problems (actually annoyances) if incorrect, e.g. SMS messages not being received with the correct time and date.
Here, Ramad a very respected member of the community has made a collection of firmware generally with multi-CSC's. You can use these downloads or really any of the other downloads from sammobile (link to the Europe section). It doesn't matter much if he doesn't get the correct firmware because they are all available in Europe.
Find your CSC from Samfit samsung letter code. They are the 3-letter codes nearing the bottom. Press " Ctrl + F " and then type in your country. This will highlight your country on the page. Look to see if your carrier has a specific code, if it does then remember is and look at Ramad's list.
Go down to the 2.2 or 2.2.1 section and again " Ctrl + F " and type in the CSC. Look for the firmware that has it listed. Download that firmware and flash using the instructions at the top of Ramad's thread or using the pdf that you can download from sammobile. Generally the latest build date is best to download. But if you don't it doesn't matter because you will be using stock you can plug it into Kies and it will update it for you.
To check your CSC the long way (I cannot remember the short way ) type in *#272*(your imei)#
This will display your current imei and allow you to change it. Changing it to the one you want will factory reset your phone so be ready.
If i have left anything out or you have any more questions then let me know...
Hope all goes well
http://www.google.co.uk/url?sa=t&rc...2ZTkBw&usg=AFQjCNHCNRbuqVFXltW99vQc1_pfPlNr4Q
check this out video guide
Oke. I really bricked the phone now i guess.
If i turn on power.. it doesnt do a thing. can't enter download mode either
i downloaded the right .tar file im almost sure. But when it was flashing.. The phone was constantly rebooting. so the usb connectiong diddnt stay on.
Not to worry. You probably haven't bricked it. The worst you will probably have to do is make a purchase of a USB jig which forces download mode...
Before that however there are multi tricks to try get it into DM. (Obviously make sure your battery is sufficiently charged.)
1. Hold down the combo and then put the battery in, whilst holding the combo. (You will probably need help)
2. Start Odin (make sure all kies apps are closed on the comp first) plug in phone. Hold down combo.
3. Same as number 2 without battery. If it doesn't work. Set up as 2 hold combo then battery in.
4. Same as 2 with charger instead of computer.
I think those are all the combinations but you can search for it. There used to be a thread on general listing all the ways you could be bricked and ways of getting out.
Anddddd if all that fails, then you can make or buy a USB jig. Search general if you want to buy it but also you can find links to buyers members have used.
And in the worst case none of that works.. you can set the unbrickkable mod which means you will loose warranty for ever and never get it back as it is a hardware modification. I'll give the link to that if and when you need it.
Good luck
Sent from my GT-I9000 using XDA
pfjew. it worked. can enter download mode!
But when i want to flash my proper firmware it asks for a pit file this time. But i don;t have a pit file at my firmware that i downloaded from sammobile. only a .tar file and a .dll
Which .pit should i use? I really want the right one this time. Deffenitily dont want to brick the damn thing i grabbed this firmware from sammobile
I9000XWJW1 ## 2.3.6 2012 January I9000XENJV5 Netherlands
I did a quick search because Sammobile is now super crap. Remember reading this..
[GUIDE] [INFO] The reality of PIT files
Having a quick scan of what it says, I believe it does not matter...But best to read to be sure.
Let us know if it works
it worked. flashed the firmware. rom doesnt work.. Boot loop.
Can enter Android system recovery now. But because that doent support my external sd, and i can't boot properly i can't flash a new rom?
I would like to flash CWM with external_sd support. searching for that one now
(i know how at my optimus 2x.. but everything is lots easier at optimus 2x compared to sgs)
Have you tried flashing it again?
Also have you tried flashing an older rom with a multi csc that includes your csc?
And finally [ODIN] DarkyROM 10.2 Resurrection GT-I9000, usually helps people stuck in your situation. Id try the first two though because it keeps stock.
last one worked. thanks A LOT!
Hi,
my SGS seems to be bricked. I have tried everything described in the posts before, but nothing worked.
Here is what I did:
I downloaded several roms (those mentioned in the previous posts and from other forums) and installed them via Odin3 (1.85). The Odin log says everything went fine:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PHONE_XXJW4.tar.md5 is valid.
<OSM> CSC_OXAJW4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
The SGS reboots and stucks at the very first Samsung logo (the one without animation). When I hit the softkeys, the light goes on, but doesn't turn off again.
After each installation I didn't touch the phone for 20 minutes hoping that something happens - but nothing
Only 2 options are left:
- returning to the download mode
- removing the battery
Another strange issue: When I try to load the SGS, the displays turns on and shows the battery symbol, but it is not animated.
Has anyone an idea what else I can do?
Thank you for your help in advance!
@keinfilter:
from samfirmware.com the flash program for i9000 is 1.82 or 1.3 or 1.0
have you used the 512 pit file?
Well you say you have done all of the above...
1. You cant even boot with [ODIN] DarkyROM 10.2 Resurrection GT-I9000??
2. Wipe by going into recovery and doing all these wipes...
wipe date/factory reset + wipe cache + mount and storage>>>format system+cache+datadata+data (I dont wipe boot and you need sdcard)
After doing all the above wipes try Darky or stock with repartition checked...
3. I'm assuming that you used single tar files for flashing via odin, have you tried Odin flashes with 3 files?? If not either find a rom with 3 files or split one of the roms using the following guide by Ramad
Let us know if any of that works...
Good luck
Thanks for the very fast answers!
from samfirmware.com the flash program for i9000 is 1.82 or 1.3 or 1.0
have you used the 512 pit file?
Click to expand...
Click to collapse
I tested all three version (1.82, 1.3, 1.0), each with 3 files roms and the 512 pit file. Nothing changed, still the samsung logo.
1. You cant even boot with [ODIN] DarkyROM 10.2 Resurrection GT-I9000??
Click to expand...
Click to collapse
After trying the DarkyROM with his ODIN again, the DarkyROM logo (Galaxy S GT-I9000 powered by DarkCore & Darky's rom) is displayed instead of the samsung logo. But the boot process doesn't continue
DarkyROMs zip archive contains only the PDA.tar, what about the CHC and PHONE? Do I have to use these from other roms? I haven't tested it yet, because I don't want to make it worse.
Wipe by going into recovery and doing all these wipes...
Click to expand...
Click to collapse
I can't access the recovery mode. Tried it via holding Vol up + Home button + Power button until the Samsung logo was shown the 2nd time and then releasing all buttons, but nothing else than the samsung logo.
3. I'm assuming that you used single tar files for flashing via odin, have you tried Odin flashes with 3 files?? If not either find a rom with 3 files or split one of the roms using the following guide by Ramad
Click to expand...
Click to collapse
All the roms I tried consisted of 3 files but the DarkyROM.
Edit: Btw: I have no micro-sd or sim card inserted because I read in any forum it is better to remove them. I don't know if this makes any difference.
Has anyone further ideas? Any help would be appreciated!
Try to reflash in JVU STOCK with PiT512, MODEM, CSC, etc... with battery fully charged.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Envoyé avec Tapatalk 2.0.1 depuis mon Samsung Galaxy S GT-I9000
ROM : SLIM ICS 3.3
Kernel : Origine ROM
Modem : JW4
Hey guys. I have a peculiar problem with my friends Galaxy S. Yesterday, I tries to flash a Jelly Bean ROM from the forums. Straight from Gingerbread, I followed all the instructions to the line and finished flashing.
But sadly, the phone got stuck in a bootloop and is not booting right now. The three button combos aren't working - both download and recovery mode and I was pissed. Thankfully, I had a JIG with me (one I use with my Galaxy Note) and got my phone into download mode.
The problem now is that whenever I try to flash a stock ROM, it gets stuck at the boot.ini file and Odin says "Complete (Write) process failed". The phone (from inside downloaded mode) shows the text "Invalid Bootloader !!!" on the top.
I realize this is fixable but I just don't know what file to flash I am used to the Galaxy Note and the naming conventions and forum posts aren't quite clear to me. Can someone tell me what file I should be flashing to get the bootloader working again?
Thanks in advance!
Sent from my GT-N7000 using xda premium
gramessh said:
Can someone tell me what file I should be flashing to get the bootloader working again?
Click to expand...
Click to collapse
you can use any recovery kit from the My Androids Collections link below
I used the following recovery kit:
i9000 EzBase Rescue with CF Root & semaphore root repacked by slaphead20
No luck. Still the same error. Am I doing something wrong?
gramessh said:
I used the following recovery kit:
i9000 EzBase Rescue with CF Root & semaphore root repacked by slaphead20
No luck. Still the same error. Am I doing something wrong?
Click to expand...
Click to collapse
First remove battery, EXT SD card and SIM Card, press power for a few mins before reinserting battery to try
use the rescue kit with boot loader using heimdall or you can use those files with Odin too
recovery kit with bootloader? I am not sure which one that is. I can see a lot posted. I tried the Darky thing too and it failed.
Could you please provide me with a link?
gramessh said:
recovery kit with bootloader? I am not sure which one that is. I can see a lot posted. I tried the Darky thing too and it failed.
Could you please provide me with a link?
Click to expand...
Click to collapse
its i9000 Rescue Kit for i9000 using heimdall packed by ldq, it has its own bat.exe to do it automatically from PC, but you can also use the files on Odin or on linux, for linux , the configuration will be
primary boot > boot.bin
secondary boot > Sbl.bin
repartition > s1_odin_20100512.pit
factoryfs > factoryfs.rfs
cache > cache.rfs
dbdata > dbdata.rfs
param > param.lfs
modem > modem.bin
kernel > zImage
xsenman said:
its i9000 Rescue Kit for i9000 using heimdall packed by ldq, it has its own bat.exe to do it automatically from PC, but you can also use the files on Odin or on linux, for linux , the configuration will be
primary boot > boot.bin
secondary boot > Sbl.bin
repartition > s1_odin_20100512.pit
factoryfs > factoryfs.rfs
cache > cache.rfs
dbdata > dbdata.rfs
param > param.lfs
modem > modem.bin
kernel > zImage
Click to expand...
Click to collapse
sorry to get in like this
but i have the same problem
can u explain how to use the files with odin please?
thanks
benhouli said:
sorry to get in like this
but i have the same problem
can u explain how to use the files with odin please?
thanks
Click to expand...
Click to collapse
that package already has a bat.exe file, which will do it automatically when phone connected to PC, try that first
xsenman said:
its i9000 Rescue Kit for i9000 using heimdall packed by ldq, it has its own bat.exe to do it automatically from PC, but you can also use the files on Odin or on linux, for linux , the configuration will be
primary boot > boot.bin
secondary boot > Sbl.bin
repartition > s1_odin_20100512.pit
factoryfs > factoryfs.rfs
cache > cache.rfs
dbdata > dbdata.rfs
param > param.lfs
modem > modem.bin
kernel > zImage
Click to expand...
Click to collapse
xsenman said:
that package already has a bat.exe file, which will do it automatically when phone connected to PC, try that first
Click to expand...
Click to collapse
already did , but i get message heimdall not installed , do u what to install now ?
i say yes
but even i am with windows xp and with admim permissions
it say i need admin permissions and need to do run as admin
and even i do it, it don't stop say it . and won't continue
by the way
on the sticker on back the phone it say I9000GSMH
and what i start the phone i see logo of anycall
benhouli said:
on the sticker on back the phone it say I9000GSMH and what i start the phone i see logo of anycall
Click to expand...
Click to collapse
you need to verify, IF you have an Anycall M110S or i9000, check forv retractable Antenna on top right corner, IF you have one than its an Anycall M110S an usinh i9000 Roms will only make it worse.
If its i9000, check MY Android Solutions link below to identify the exact problem you are having , in using Odin, you normally use only 3 files http://forum.xda-developers.com/showthread.php?t=1102881
xsenman said:
you need to verify, IF you have an Anycall M110S or i9000, check forv retractable Antenna on top right corner, IF you have one than its an Anycall M110S an usinh i9000 Roms will only make it worse.
If its i9000, check MY Android Solutions link below to identify the exact problem you are having , in using Odin, you normally use only 3 files http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
it's without the antenna
and i know about the 3 files and the pit file...
i tried that
try a lot of roms from the link u give me...
the only one i could start the phone was
Froyo 2.2.1
Asia
ZSJPJ/ZSJPG/OZSJPG
but it was very slow , without sound , and no imei
all the others got me to invalid bootloader
and the version was installed on the phone when i got him was
android version : 2.3.4
baseband version : i9000zsjpj
kernel version : 2.6.35.7
build number : lidroid-i9000-1.2
but i didn't do backup
and i don't know how to get any normal rom to work
benhouli said:
android version : 2.3.4
baseband version : i9000zsjpj
kernel version : 2.6.35.7
build number : lidroid-i9000-1.2
but i didn't do backup
and i don't know how to get any normal rom to work
Click to expand...
Click to collapse
lidroid is a Chinese modified ROM, ok, If you want to try flashing under Odin follow this http://forum.xda-developers.com/showpost.php?p=22471340&postcount=1
xsenman said:
you need to verify, IF you have an Anycall M110S or i9000, check forv retractable Antenna on top right corner, IF you have one than its an Anycall M110S an usinh i9000 Roms will only make it worse.
If its i9000, check MY Android Solutions link below to identify the exact problem you are having , in using Odin, you normally use only 3 files http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
xsenman said:
lidroid is a Chinese modified ROM, ok, If you want to try flashing under Odin follow this http://forum.xda-developers.com/showpost.php?p=22471340&postcount=1
Click to expand...
Click to collapse
still no success
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and why the message invalid bootloader repeat itself ?
after every rom i try to flash?
benhouli said:
still no success
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
When you used Pit, was repartitioned ticked? , IF ticked and failed, download a 803 Pit (from, My android collections link below) and flash with boot loader and ROM package but untick repartition
xsenman said:
When you used Pit, was repartitioned ticked? , IF ticked and failed, download a 803 Pit (from, My android collections link below) and flash with boot loader and ROM package but untick repartition
Click to expand...
Click to collapse
still fail after i got 803 pit and untick repartition
and invalid bootloader too...
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
by the way
phone bootloader update stay unchecked...
and one more thing...
to flash everytime i must connect the jig to get the downloading mode,,,,
if i won't do it it will stay on anycall logo
benhouli said:
phone bootloader update stay unchecked...
and one more thing...
to flash everytime i must connect the jig to get the downloading mode,,,,
if i won't do it it will stay on anycall logo
Click to expand...
Click to collapse
Do you have KIES installed, if you do, kill all three KIES running files in your system using task manager and try again
This model with I9000GSMH, seems to have this problem, and I am not too sure why it has Anycall boot loader, as only M110S should be using it and the ROM package for it is different with hardware differences. I keep wondering if this model is a Chinese imitation or actually an M110S swiped with and i9000 casing or mother board .
I have come across a few persons having this very same issue on this very same model.
If you want to try using a Anycall Pit and Boot loader you can download from Pit Stop link below or try searching lidroid web site http://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http://bbs.lidroid.com/ for a suitable ROM package
xsenman said:
Do you have KIES installed, if you do, kill all three KIES running files in your system using task manager and try again
This model with I9000GSMH, seems to have this problem, and I am not too sure why it has Anycall boot loader, as only M110S should be using it and the ROM package for it is different with hardware differences. I keep wondering if this model is a Chinese imitation or actually an M110S swiped with and i9000 casing or mother board .
I have come across a few persons having this very same issue on this very same model.
If you want to try using a Anycall Pit and Boot loader you can download from Pit Stop link below or try searching lidroid web site http://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http://bbs.lidroid.com/ for a suitable ROM package
Click to expand...
Click to collapse
there is no trace on kies on task manager
and yes i know this is very weird thing that it's i9000 with anycall logo
about the pit stop link i will try
and about the lindroid i tried that too , it's very hard to find there something normal
by the way
thanks a lot for your help!
benhouli said:
there is no trace on kies on task manager
and yes i know this is very weird thing that it's i9000 with anycall logo
about the pit stop link i will try
and about the lindroid i tried that too , it's very hard to find there something normal
by the way
thanks a lot for your help!
Click to expand...
Click to collapse
can you try this bootloaders http://forum.xda-developers.com/showpost.php?p=14013450&postcount=1 with a JVU ROM or just the loader to see, IF it works
xsenman said:
can you try this bootloaders http://forum.xda-developers.com/showpost.php?p=14013450&postcount=1 with a JVU ROM or just the loader to see, IF it works
Click to expand...
Click to collapse
tried both...
both failed
You saod one of them worked... Froyo one i guess.
I think you should try to flash it after that get CM7.custom roms have boot images so...
I suggest this... But not sure if it works
Really sorry mate... I wish you luck .
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
[Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode screen
Hi,
I was trying to install new ROM through Odin software. I tried with Odin3 one click downloader. I also tried using KI2 with Boog's Kernel odin software. but both are failing. Shows FAIL with following output -
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
Another problem is that for my Samsung Captivate mobile... Download mode screen stopped coming ( I think it happened when by mistake I updated mobile's bootloader with some Corn s/w bootloader by selecting the file in Bootloader field in Odin. It created a big problem for me. I couldn't go in to download mode after this.
So finally I purchased USB jig to enable Download mode (last option to make mobile in download mode).
Even though I can update the firmware using Jig. But still download mode screen is not coming.But when I connect mobile to computer with usb cable, after using USB jig, I could see that odin shows "ADDED" with yellow box showing some port no. Above output comes when i continue with installing tar/md5 file of ROM with Odin. but it fails. So i am unable to use my mobile... .
It worked when I updated ROM with following package - GT_I9000_ZSJPK_ZSJPG_OZSJPG. It contains PDA, PHONE and CSC files.
First I did partition with file s1 odin 20100512.pit and after that I selected these three files in corresponding fields in Odin software and clicked on start button. It worked and i could see FROYO installed in my captivate phone. But this ROM update is for I9000 mobile. so all functionality is not working properly. what i mean to say here that I can update mobile with I9000 ROM. but not with captivate ROM.
My mobile's situation is that it has no software installed. Just as a hardware. No Bootloader, Nothing. Even AT & T screen doesnt come when I start my mobile. It is totally dead.
Can anybody please help me ? how can I resolve this problem. I searched all the thread in forum. But it is not helping me to resolve my problem. .
Issues are -
AT & T screen is not coming when i start the phone.
Download mode screen is not coming when i start the phone.
Just Assume that I have captivate phone without partition, without bootloader ...
Can anybody please help ?
vishu_10d said:
Hi,
I was trying to install new ROM through Odin software. I tried with Odin3 one click downloader. I also tried using KI2 with Boog's Kernel odin software. but both are failing. Shows FAIL with following output -
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
Another problem is that for my Samsung Captivate mobile... Download mode screen stopped coming ( I think it happened when by mistake I updated mobile's bootloader with some Corn s/w bootloader by selecting the file in Bootloader field in Odin s/w. It created a big problem for me. I couldnt go in to downlaod mode after this.
So finally I purchased USB jig to enabled Download mode (last option to make mobile in downlaod mode).
Even though I can update the firmware using Jig. But still download mode screen is not coming.But when I connect mobile to computer with usb cable, after using USB jig, I could see that odin shows "ADDED" with yellow box with some port number. Above output is comes when i continue installing tar/md5 file of ROM with Odin. but it fails. So i am unable to use my mobile... .
It worked when I updated ROM with following package - GT_I9000_ZSJPK_ZSJPG_OZSJPG. It contains PDA, PHONE and CSC files.
First I did partition with file s1 odin 20100512.pit and after that I selected these three files in corresponding fields in Odin software and clicked on start button. It worked and i could see FROYO installed in my captivate phone. But this ROM update is for I9000 mobile. so all functionality is not working properly. what i mean to say here that I can update mobile with I9000 ROM. but not with captivate ROM.
My mobile's situation is that it has no software installed. Just as a hardware. No Bootloader, Nothing. Even AT & T screen doesnt come when I start my mobile. It is totally dead.
Can anybody please help me ? how can I resolve this problem. I searched all the thread in forum. But it is not helping me to resolve my problem. .
Issues are -
AT & T screen is not coming when i start the phone.
Download mode screen is not coming when i start the phone.
Just Assume that I have captivate phone without partition, without bootloader ...
Can anybody please help ?
Click to expand...
Click to collapse
Here's what you need: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Grab Odin KK4 with bootloaders from that thread. That should get your phone back up. If you wanna get farther and flash a custom ROM, follow http://forum.xda-developers.com/showthread.php?t=1350266
BWolf56 said:
Here's what you need: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Grab Odin KK4 with bootloaders from that thread. That should get your phone back up. If you wanna get farther and flash a custom ROM, follow http://forum.xda-developers.com/showthread.php?t=1350266
Click to expand...
Click to collapse
Thanks for the reply...
I tried with Odin one click downloader also... but it is failing... attaching the image...
Re: [Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode scr
Try a different micro usb/usb cable. And also a different usb port if the different cable doesn't work.
And if that fails...some Captivates don't like One Clicks, so see my post here...http://forum.xda-developers.com/showthread.php?p=30840818
Then use the [Utility]KK4 Easy Root by Red_81 http://forum.xda-developers.com/showthread.php?p=26710533 to get Root and KK4 Corn Kernel that has CWM Recovery...if u want.
Another helpful sticky thread...http://forum.xda-developers.com/showthread.php?p=33227541
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
Try a different micro usb/usb cable. And also a different usb port if the different cable doesn't work.
And if that fails...some Captivates don't like One Clicks, so see my post here...http://forum.xda-developers.com/showthread.php?p=30840818
Then use the [Utility]KK4 Easy Root by Red_81 http://forum.xda-developers.com/showthread.php?p=26710533 to get Root and KK4 Corn Kernel that has CWM Recovery...if u want.
Another helpful sticky thread...http://forum.xda-developers.com/showthread.php?p=33227541
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Hi,
I followed the steps written in the forum above. But that is not working my case. I tried the steps in different computer with diff OS installed. but still same problem.
Is there any way to get PHONE, PDA, CSC file separately for i897 ? I could install I9000 in my samsung captivate mobile which had these files. So just thought, if i can get these files for i897, probably it should work?
Any Idea where i can get these files?
Re: [Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode scr
^
Here ya go...http://forum.xda-developers.com/showthread.php?p=19587108
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
^
Here ya go...http://forum.xda-developers.com/showthread.php?p=19587108
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Hi,
Still my problem is same. I went through the link. but that is also not helping.
In my phone, I cant see download screen, even though if i use USB jig.
When I run Odin s/w, I can see in odin as port "Added" when Connect my mobile with computer using usb port.
Usually Odin show port added when u are in download mode. But here in my case, when i first USB jig and then connect to computer, download mode screen message and image doesnt come. it shows nothing(like no display). But I can see , Odin shows port Added. and I could update kernel, do partitions etc. But when I select Image file as PDA. and click start. It always fails.
Is it happening because i cant see download mode screen ?
1. What firmware I need to install and how which contains code for showing download screen ?
2. Or can anybody provide me all files i.e. PIT, Bootloader, PDA, Phone, CSC for odin so that i can select all files in respective fields under Odin software and start update?
Please help.
One more thing i have noticed.. here is the output of odin when i update my mobile with following files of I9000 model. while trying images for my captivate mobile, I found a zip file for model GT I9000 and package name was -GT_I9000_ZSJPK_ZSJPG_OZSJPG. It had three files as - 1. CSC_OZSJPG.tar.md5. 2. PDA_ZSJPK.tar.md5. 3. PHONE_ZSJPG.tar.md5.
I selected this files in corresponding PHONE, CSC, PDA fields in odin and it updates phone successfully with the following output -
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_ZSJPK.tar.md5 is valid.
<OSM> PHONE_ZSJPG.tar.md5 is valid.
<OSM> CSC_OZSJPG.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> param.lfs
<ID:0/017> zImage
<ID:0/017> factoryfs.rfs
<ID:0/017> dbdata.rfs
<ID:0/017> modem.bin
<ID:0/017> cache.rfs
<ID:0/017> Removed!!
<ID:0/017> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/018> Added!!
<ID:0/018> Removed!!
<ID:0/019> Added!!
But even though i can see my phone with I9000 model image installed. but most of the operations it doesnt work. might be becoz image is not fully compatible with Captivate model. so no use.
You should always be able to see the download screen no matter what fw you're on. I could see it on 2.3.5, 4.2.2, etc. Even with a jig you can't force it into download mode? Did you make it or buy it?
x0ne215 said:
You should always be able to see the download screen no matter what fw you're on. I could see it on 2.3.5, 4.2.2, etc. Even with a jig you can't force it into download mode? Did you make it or buy it?
Click to expand...
Click to collapse
I purchased a jig for samsung captivate from ebay website. when I tried with it, It doesnt show me downlaod mode screen. But it make my mobile able to connect to system. And I can see the port as added in odin. using that only I have installed android froyo of GT I9000 model in captivate mobile. I tried with all the PDA files available in forums here, but it didnt work.
Presesnt situation is, I am using captivate mobile which have android version of GT 9000 model. As I mentioned in the post.
vishu_10d said:
I purchased a jig for samsung captivate from ebay website. when I tried with it, It doesnt show me downlaod mode screen. But it make my mobile able to connect to system. And I can see the port as added in odin. using that only I have installed android froyo of GT I9000 model in captivate mobile. I tried with all the PDA files available in forums here, but it didnt work.
Presesnt situation is, I am using captivate mobile which have android version of GT 9000 model. As I mentioned in the post.
Click to expand...
Click to collapse
I'm curious do you ever see anything on your screen?
Sent from my SGH-I897 using xda app-developers app
m1batt1 said:
I'm curious do you ever see anything on your screen?
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Yes. As i Said. I am running Android version of GT 9000 on my Samsung Captivate model and it is working fine(except some cases e.g. screen orientation while running games and some other apps, Media sound doesnt come etc).
vishu_10d said:
Yes. As i Said. I am running Android version of GT 9000 on my Samsung Captivate model and it is working fine(except some cases e.g. screen orientation while running games and some other apps, Media sound doesnt come etc).
Click to expand...
Click to collapse
I think it meant something along the lines of ''What is showing on your screen while in download mode''?
BWolf56 said:
I think it meant something along the lines of ''What is showing on your screen while in download mode''?
Click to expand...
Click to collapse
Hi,
when i usb jig and after that connect to system. I can see port Added in Odin software. which ideally happens when mobile is in downlaod mode.
but here for me display doesnt show anything on screen, screen remain blank. No android icon comes. but still I can see port added in odin and also can install files in the mobile. like pit, bootloader PDA files. etc.
I have tried my image files which is available with bootloaders in forum. But when I start. I always get following error.
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
It always fails while executing sbl.bin files. I have gone through some forum where reports similar issue of sbl.bin.
Resolution which was given is to try with " 4 part flash files" which is Boot, PDA, Modem, CSC files.
http://www.droidevelopers.com/f299/14467-sbl-bin-error.html.
But this solution is not for captivate mobile.
It would be good if someone can provide me these files instead of a single installable file.
vishu_10d said:
I have tried my image files which is available with bootloaders in forum. But when I start. I always get following error.
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
It always fails while executing sbl.bin files. I have gone through some forum where reports similar issue of sbl.bin.
Resolution which was given is to try with " 4 part flash files" which is Boot, PDA, Modem, CSC files.
http://www.droidevelopers.com/f299/14467-sbl-bin-error.html.
But this solution is not for captivate mobile.
It would be good if someone can provide me these files instead of a single installable file.
Click to expand...
Click to collapse
I believe 4-2ndtwin has the link to them in his sig.
BWolf56 said:
I believe 4-2ndtwin has the link to them in his sig.
Click to expand...
Click to collapse
So any suggestions ? what should I do now ?
vishu_10d said:
So any suggestions ? what should I do now ?
Click to expand...
Click to collapse
Search for 4-2ndtwin.. Go into his profile, then sig link and find the separated files.
vishu_10d said:
So any suggestions ? what should I do now ?
Click to expand...
Click to collapse
You need Jtag
Check my signature for more detail.
Here is the i897uckf1 gingerbread 2.3.3 files...http://forum.xda-developers.com/showthread.php?p=30840818...Post #284 in that thread.
Do not put any files in the Bootloader tab of Odin. Just PDA in pda tab, CSC in csc tab, PHONE in phone tab and also Pit file in the pit tab. Be sure to have a reliable usb/micro usb and constant power source. This firmware does contain the Bootloaders.
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
Here is the i897uckf1 gingerbread 2.3.3 files...http://forum.xda-developers.com/showthread.php?p=30840818...Post #284 in that thread.
Do not put any files in the Bootloader tab of Odin. Just PDA in pda tab, CSC in csc tab, PHONE in phone tab and also Pit file in the pit tab. Be sure to have a reliable usb/micro usb and constant power source. This firmware does contain the Bootloaders.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Thanks a lot for providing me these files. This is what I wanted. I will try as you suggested and will let you know the result.
Thanks