i insert a file named sgt-boatloader-patch-v1.00.apk to break my galaxy tab device protection but i regreted because after that i lost my recovery mood and can not go to recovery as when i tried the screen turns into longtudinal coloured lines,also kies not recognized, tried to remove the file but fail,.,.also i made usb format but no value.....all what i need is to return to recovery system to reboot and to format,,,,please dont ignore me
Can you get into download mode then install a rom via odin. I did something similar and this fixed it.
also got this problem, but now fixed. have a look here.
http://forum.xda-developers.com/showpost.php?p=23714736&postcount=7
That bootloader patch didn't cause those lines. They come from flashing a kernel that has unsigned bootloaders.
You need a complete flash with a .pit file and repartition. Go to teamovercome.net, downloads, stock safe gingerbread. Get the instructions guide while you are there also. After you repair your bootloader, you can flash any other rom you wish, or just stick with the stock gingerbread.
Related
My Tab is stuck at GalaxyTab Samsung" boot screen after i try to flash Roto-JMI-v2, before i was running Overcome v1.1.2 rom and [Kernel] [EURO] [1.4ghz OC/UV] MCR EXT4 v12 and it work like a charm. But becurse i deside to sell my TAB i flash back to Roto JMI.
I flash with Odin 1.7 with success, but now it stuck at boot logo.
After that I try many other ROM and flash with Heimdal but no lock.
I have no problem to get download mode, and flash with odin and Heimdal. But I can't get into recovery mode (power+vol up)
I have try almost every solution in the Forum...
What to do next...??
Have you tried flashing kernel only? like the overcome kernel v1.0?
Perhaps that will get you ClockWorkMod Recovery back...and you can go from there.
I try it now, shall i use odin or Helmdall to flash kernel only
With overcome kernel v1.0 it fail in Odin
That's odd. Odin should flash the kernel fine.
Does it give an error? or it just says successful, but you still cannot get into CWM?
It give a error, and I still cannot get into CWM, shall i use a pit to flash
And I have try this....
1.Get a stock rom package (any of Rotohammer's firmwares will work)
2.Get P1_add_hidden.zip attached to this post and extract the P1_add_hidden.pit file
3.Using Odin 1.7, put stock rom (Roto-JME-Full-v4.tar for example) in PDA slot.
4.Put P1_add_hidden.pit in Pit slot
5.Check repartition box
6.Put Tab in download mode by holding Volume Down and Power, connect to the computer, and press start.
7.After this, the Tab will reboot normally. Shut it down and return to download mode.
8.Open Odin 1.7 and reconnect the Tab.
9.In the PDA slot, choose the Overcome Kernel v2.0 tar file for use with Odin. Press start
10.It will flash the kernel then reboot. Upon reboot, you should hear the sexy robot voices informing you of the status of the EXT4 conversion.
11.Once done, the Tab will boot normally. At this point you can load Overcome v1.2.2 rom (or any other Rom of your choosing)
12.NOTE - Overcome 1.2.2 includes v2.0 of the kernel, so no reflashing is required after install.
Hi,
I try this from Samsung stock ROM P1000JK5 and i stuck on the Samsung boot imge. Can i only upgrade to kernel 2 when i have a JM* (Rotohammer rom?)
This is very weerd, other with some god solution
NN1123 said:
This is very weerd, other with some god solution
Click to expand...
Click to collapse
You are correct - he needs to repartition the sd card, using the .pit file because it was formatted to ext4.
Your steps are great! I do them one at a time with a reboot between each one.
sreins said:
Hi,
I try this from Samsung stock ROM P1000JK5 and i stuck on the Samsung boot imge.
Click to expand...
Click to collapse
Oops - if you got your rom from samsung you have a locked bootloader. You can continue to flash those updates, or you can use a patch to remove the lock, then you can continue on.
Can someone please paste the link to the patch?
how about the Verizon gtab...
same thing is happening to me on the galaxy tab from verizon... samsung says to send it.. but i dont want to wait two weeks without my tab... thanks..
Stuck in Bootup Screen
I also have same problem,
I flashed a Rom from "samfirmware" and after it finished it stuck on bootup screen, unable to do recovery mode.
only goes to bootup screen or Dawnload .
can you guys help ?
You gentlemen have a locked bootloader. If you search the tab development forum you will find the solution. A member named Chainfire developed an app you download to your sd card, then install it, then run it, and it will move the offending bootloader. I can't get the link here - google "locked bootloader patch" or posts by Chainfire.
When it is removed, don't flash roms with the samsung kies - all those roms have the locked bootloader.
Stuck in Bootup Screen
thanks
but I can not get the tab to load in order to run any app. it is stuck in boot screen. any suggestion ?
You cannot get into download mode? That is power + volume down.
Do you know of the adb program?
stuck on bootup screen
I havent used ADB before.
any other solution?
rangercaptain said:
You gentlemen have a locked bootloader. If you search the tab development forum you will find the solution. A member named Chainfire developed an app you download to your sd card, then install it, then run it, and it will move the offending bootloader. I can't get the link here - google "locked bootloader patch" or posts by Chainfire.
When it is removed, don't flash roms with the samsung kies - all those roms have the locked bootloader.
Click to expand...
Click to collapse
how install apk boot pacth phone only samsung logo or only enter download mode how install boot patch ?
newbie comes here to learn how to flash kernel.
so i have been running Paranoid android for a while, and wanted to try this out:
http://forum.xda-developers.com/showthread.php?t=2051904
flashed the latest cm10.1 kernel, and then formated cache, dalvic, battery stats, etc.
then i managed to reboot before i had flashed the new rom and got stuck in bootloop. could not access CWM any more
after this i downloaded odin after a few forum reads, and flashed different versions of CWM to see if i could get back in to flash the rom.
the latest one i have in it is this:
http://fs1.d-h.st/download/00033/pQK/GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9.tar
as it was recommended in some un-brick thread. still no access to CWM
after this i flashed a stock rom, as i could not find any .md5 or .tar roms to use with odin, and i got at least a samsung logo on hte screen, before i got back to boot screen and was stuck there again.
CWM still not working, or showing up in any way.
out of obvious options i now tried flashing the pit file trough odin from this thread
http://forum.xda-developers.com/showthread.php?t=1424997
and after this the samsung boot logo did not show up anymore. only boot loop
i am now going to try and download the older ginger bread rom and flash it trough odin, but i got no idea if it will make any difference.
otherwise phone goes to download mode just fine, and i got working drivers in windows trough kies.
im quite new to this, and dont really know what would work from here. ill end up hard bricking the phone if i don't get some help, and the trash can will be my n7000 next home.
any advice is welcome
--------------------------------------------------------------------
EDIT:
flashing official rom again after the pit file acrually gave me a working phone again. also i now got 50 gb of drop box storrage for free, so thats nice
Ok , step by step of what I did and where Im at now .
I got the Note 4 today . Played with stock firmware for a moment ( last running firmware was Anj7 baseband stock unrooted ) . Booted into download mode rooted with ch-root and checked nand erase all in Odin . I believe it erased the stock rom . Binary was changed to custom confirmed in download mode screen .
Then Flashed TWRP .
boot into TWRP when I try to wipe it says
cant mount /data cant mount anything basically and wipe fails because nothing will mount.
I try to install FireKat v5 rom and it says successful despite TWRP wont mount anything( is v5 anj? . Do I need to flash stock rooted before I can flash any other rom ? )
Reboot after install and it goes into a boot loop after boot screen transitions into boot animation .
So at this point I have no bootable rom . It doesnt appear anything will mount in TWRP for some reason .
And Im considering flashing sammo official ANJ rom to atleast get a working phone but I dont know what changes the bootloader version be it ch root or flashing a rom . And right now Im scared if the bootloader has changed and I try to revert to an older bootloader with the sammo official anj rom it could hard brick .
Im gonna need some serious advanced help here. I never done nothing like this mess before
Some_dude36 said:
Ok , step by step of what I did and where Im at now .
I got the Note 4 today . Played with stock firmware for a moment ( last running firmware was Anj7 baseband stock unrooted ) . Booted into download mode rooted with ch-root and checked nand erase all in Odin . I believe it erased the stock rom . Binary was changed to custom confirmed in download mode screen .
Then Flashed TWRP .
boot into TWRP when I try to wipe it says
cant mount /data cant mount anything basically and wipe fails because nothing will mount.
I try to install FireKat v5 rom and it says successful despite TWRP wont mount anything( is v5 anj? . Do I need to flash stock rooted before I can flash any other rom ? )
Reboot after install and it goes into a boot loop after boot screen transitions into boot animation .
So at this point I have no bootable rom . It doesnt appear anything will mount in TWRP for some reason .
And Im considering flashing sammo official ANJ rom to atleast get a working phone but I dont know what changes the bootloader version be it ch root or flashing a rom . And right now Im scared if the bootloader has changed and I try to revert to an older bootloader with the sammo official anj rom it could hard brick .
Im gonna need some serious advanced help here. I never done nothing like this mess before
Click to expand...
Click to collapse
Let me try my noob expertise out lol...from what I know the only way to hardbrick is by using the wrong modem on your variant. So I think you have nothing to worry about. What you have is soft brick.
Download from sam mobile nj7 or nk4 firmware and reflash via odin. Hope this helps.
NOTE 12-10+2 ?
T LEONARDIS said:
Let me try my noob expertise out lol...from what I know the only way to hardbrick is by using the wrong modem on your variant. So I think you have nothing to worry about. What you have is soft brick.
Download from sam mobile nj7 or nk4 firmware and reflash via odin. Hope this helps.
NOTE 12-10+2 ?
Click to expand...
Click to collapse
Ok im downloading nj7 right now . I think the problem I did was erasing nand when I did first root and it caused no partitions to be set.
What part of the root process was not clear. If you look online u will find step by step rooting video. Go back to stock and try again thru odin
BAD ASS NOTE 4
Just flash stock rom with Odin and start over. Don't do the crazy erasing step next time. These phones are hard to brick. I've honestly never seen one I couldn't fix.
Yes, in Odin you shouldn't be clicking anything other then the pda box to put the proper tar in. Which of you download the cf auto root zip. Then make a new folder on your desktop. Open the downloaded cf auto root zip. Then highlight and drag n drop all files/contents of your Cf auto root zip into the newly created folder on your desktop. From the newly loaded folder right click on Odin run as administrator. Once in there put your phone into download mode and hook it up via USB to your pc a blue box with the word Com and a number will pop up in the upper left. The number doesn't matter as long as it says Com and a number, this is odin's way of showing it recognizes your device. . Hit the pda tab it'll bring you to that folder with only one file showing. Double check it's named Tmo to insure you downloaded the correct one. Select it. Odin will automatically fill in the proper boxes.
Hit run and it should knock it out fairly quick.
If you have ANY QUESTIONS just follow this video tutorial to the T... How to Root the Samsung Galaxy Note 4: http://youtu.be/mdkLxNNLGiA
That's by QBKING77 He knows what he's doing. Let us know how it goes
http://forum.xda-developers.com/showthread.php?t=2957156
Hi everybody
Im new here and to flahing new Roms and stuff.
i believe my phone is bricked and im struggling to get it opperational. Here is what happened...
I have a GT-N7000 on 4. 1. 2 Jelly Bean, which i rooted and flashed to custom ROM CynoganenMod 12 on 5. 0 Lollipop. All was going fine, i rooted my phone, installation went accordingly. After a week or so whithout any problems, my phone started to freez, slag and hang which it never did before, so i decided to flash it back on 4. 1. 2 Jelly Bean I did all as is step by step on Odin 3.-v1.8. When my booted, it booted into System Recovery...
reboot system now (I did)
apply update from ADB
apply update from external storage (I did)
wipe data/factory reset
wipe cache partion
apply update from cache
-----------------------------------------------
# MANUAL MODE #
-- Applying Multi-CSC. . .
E : All failed to mount and open in red ( Invalid argument )
Nothing seems to work, so when i pull out the battery but it back and press "Volume down, Menu and Power button it takes me to the screen with the Warning and yellow triangle where i can install a custom ROM...
Volume up : Continue
Volume down : Cancel ( restart ) (I did)
When i Volume up it takes me to...
ODIN MODE
CUSTOM BINARY DOWNLOAD : NO
CURRANT BINARY : SAMSUNG OFFICIAL
My problem is i have no clue what my PDA nor my CSC code is. Im from South Africa and not sure either which of these are correct.... XFV, XFC, XFM, XFA (im not network locked) so i dont know which firmware to flash with Odin to make my phone opperational again? Any help please guys.
Johan
Download Philz kernel in tar.md5 format and flash using Odin... Then try to boot into recovery. You should see cwm. Factory reset and flash a stock rom again.
nokiamodeln91 said:
Download Philz kernel in tar.md5 format and flash using Odin... Then try to boot into recovery. You should see cwm. Factory reset and flash a stock rom again.
Click to expand...
Click to collapse
I have tried Phillz and did as you suggested. Im confident that i dont have the correct firmware. I downloaded this from Sammobile : N7000XXLSZ_N7000OJVLSB_N7000LSO_HOME.tar.md5.
Not sure how to go about this....
Doesn't matter what firmware you had.. Once you do a factory reset you can flash any rom made for the n7000
Were you able to get into Philz cwm recovery after you flashed the kernel?
Hi there.
I am happy to report that my phone is back to its original state. Phew, that wat too close for comfort.
I figured that it was obivously bricked or something close to it.
The problem was that i repartitioned it with the wrong PIT file and wrong kernel. Why i did that, i dont know? So i found firmware i thought would be the correct one! In its bricked state i copied the file superuser to my external, so can unzipit in CWM recovery. I download a file flashprogram Samsung N7000 +Pit. I then unzipped it and found the .Pit file which i flashed onOdin3 v1.85 at the same time with the firmware, have it repartitioned, and install the firmware.
It passed with success. Go Green!!! )
It booted to Philz recovery and installed the zip file superuser, took your advice then rebooted.
My phone switched on but a page came up where i had to give a password decrypting the device storage. Freaked out repeated the same prosesswith Odin and it started up normaly and suprised to see it restored to its original state* *smile*
*Just be carefull not to go flash the wrong stuff on your phone if your not sure what you are doing ( like i did! )*
I took your advice to heart and want to thank you for your expertieze. I learned alot from my phone the past 3days.
Regards.Johan
So i went to flash [ROM] Looper_XB but i made a mistake and flashed 5.0.2 when i needed to flash 5.1.1..Now i have made mistakes in past and would usually flash stock firmware in odin to my phone but this time it is not working. i downloaded stock firmware from here > LINKTOSTOCK. I get a error in Odin. i can go into download mode and into TWRP. I dont know what my next step is.. yes i know how to use a search bar.....i thought maybe i could flash the correct 5.1.1 Looper rom onto my phone through TWRP but i cant get my phone mounted to laptop to where it will let me transfer any files that way.. i can view all files but once i go to transfer the file over the phone will basically disconnect...In need of some help here guys.
Also was searching around and saw something about using kies , which i downloaded and installed but my phone wont connect. I only get the samsung galaxy screen and TWRP and Download mode like i mentioned
SdRasta said:
So i went to flash [ROM] Looper_XB but i made a mistake and flashed 5.0.2 when i needed to flash 5.1.1..Now i have made mistakes in past and would usually flash stock firmware in odin to my phone but this time it is not working. i downloaded stock firmware from here > LINKTOSTOCK. I get a error in Odin. i can go into download mode and into TWRP. I dont know what my next step is.. yes i know how to use a search bar.....i thought maybe i could flash the correct 5.1.1 Looper rom onto my phone through TWRP but i cant get my phone mounted to laptop to where it will let me transfer any files that way.. i can view all files but once i go to transfer the file over the phone will basically disconnect...In need of some help here guys.
Click to expand...
Click to collapse
As a last resort you can always download either Samsung Kies or Samsung Smart Switch software and restore your device with the original firmware. You will need your model and serial number. You can get your s/n by booting into download mode and then pressing the home button.
Sometimes Kies will not work on the first couple of tries but it eventually should. If it still doesn't then try Smart Switch.
Once you have restored your device you can start from scratch.