[Q] [HELP]Unable to flash SGS i9000 (assert failed:getprop) - Galaxy S I9000 Q&A, Help & Troubleshooting

edit
edit

no prob, jst flash latest jvu semaphore kernel through odin, it will also over write ur cwm then flash any rom u want. if prob persist then flash whole latest jvu rom pkg through odin by repartotion. this will renew ur fone n no data will exist chers !

edit

edit

you might have used a wrong ROM for your device, can you try going to recovery menu>mounts and storage>format system

edit

edit

you can try to flash this rom with odin --> http://sourceforge.net/projects/ficeto.u/files/JVU/JVU-RE.zip/download
it's JVU RE GT-I9000 ( DarkysRom )
after you've flash this make a fully wipe.
Then go to recovery
Flash your Rom , after this
reboot ( do not make a full reboot ! , only recovery reboot ! )
When you're again in the recovery wipe data/factory reset & wipe cache
and flash your rom again
-GOOD LUCK

edit

edit

amashaym said:
i was able to flash CNA 1.3.3 successfully from Gamerz Rom v6.5....yet i wish to know why i had that error....coz i take all precautions and that error wreaked my entire day
THANKS to everyone who help
Click to expand...
Click to collapse
If you have this again , just use the small guide

try flashing semaphore 0.9.1 , i think pppl reported this issue with aokp build 27

Final words frm me
Finally i wana say, dnt try cm roms as those roms doesn't work always either cm7 or cm9. i personally on jvu rom which is latest samnsung rom and didnt tried cm, use any jvu rom from any dev like gamers rom, simplicity(best n full featured rom which i m using) all will work gud cz devs only modify ui and do some tweaks so there is less chance of bugs as compared to cm roms cz they modified core or rom

Related

[Q] Note Root problems (After yellow triangle)

My note is 2.3.6 , N7000LA2, now kernel is XXKKA,
I am not an expert, so I rooted in a wrong way then causing yellow triangle, But i removed the triangle finally
Actually I want to flash andriod 4.0 / other ICS theme rom, what procedure I should do now??
1. Is my note not a correct kernel now??
(I feel that the battery consumed faster than before, & not as smooth as than before getting yellow triangle)
2. Can I use a regular way (using odin to root back the right kernel & flash rom)?
3. my cwm mgr is not working correctly, how should i do??
Please advise ..
Many Many many thanks!
Do you have root working now?
If yes, update CWM, you can get proper kernel from my thread 'How to Root'(c signature for link)
after that you can update to any ROM with CWM
dr.ketan said:
Do you have root working now?
If yes, update CWM, you can get proper kernel from my thread 'How to Root'(c signature for link)
after that you can update to any ROM with CWM
Click to expand...
Click to collapse
Thank you so much!
My colleague's fd finally helped me flash a new kernel ([email protected]#3)
But I have some questions
1) which version is this kernel??
2) can i keep this kernel , then flash another 4.0 rom??
3) if i dont want to use odin (pc version) to flash, can i use mobile odin or cwm to flash?
what exact procedure i have to do?
please advise..
thanks !!!
this is abyssnote kernel, universal
you can use CWM to update 4.0 ROM, put file on SD card n boot in recovery.
select flash zip file, point to ROM file, confirm it by saying ye, done.
if get bootloop, wipe cache, wipe data (it will wipe off data so take backup b4 proceeding)
dr.ketan , really thanks for your prompt reply
but I am now in another bad situation..
I flashed something wrong & the note keep rebooting, & then now cannot get in the system , just stop at the N7000 welcome page,
But i can go to CWM recovery
get into recovery, wipe cache, wipe delvic cache
still not works wipe data (you will lose data) This is routine for 4.0 based ROM
And wat u mean by 'something wrong', you are not sure it was custom ROM file?
If nothing works then go to download mode n flash older Stock ROM with PC odin
dr.ketan said:
get into recovery, wipe cache, wipe delvic cache
still not works wipe data (you will lose data) This is routine for 4.0 based ROM
And wat u mean by 'something wrong', you are not sure it was custom ROM file?
If nothing works then go to download mode n flash older Stock ROM with PC odin
Click to expand...
Click to collapse
Thanks dr.ketan!
But it is not 4.0 based rom yet, just a 2.3.6, official rom (before "broke" )
So, should i still follow your method to do??
or should i get into recovery, try to flash the stock rom N7000OZSLA2 ?
I think i flashed the wrong version:
http://forum.xda-developers.com/showthread.php?t=1415567
Now I find I cant flash any rom by CWM....
"installation aborted"
Have u wipe data ? If not do it first thn flash stock rom using pc odin
Sent from my GT-N7000 using xda premium
thanks ketan!
I really didnt wipe data, but finally flash stock rom by pc odin
done by following your post , thats really useful!
I flash hk version LA2, but cant root
& then flash KJ1 Factoryfs, got the CWM
lastly I flash the abyssnote kernel
so is my SGN now contains a KJ1 rom?
can i flash back to LA2 without losing the root?
or is there any big differences between KJ1 & LA2??
& one more, I want to add the battery %, where can i find/search the suitable one for my SGN
Thanks!
s42715 said:
thanks ketan!
I really didnt wipe data, but finally flash stock rom by pc odin
done by following your post , thats really useful!
I flash hk version LA2, but cant root
& then flash KJ1 Factoryfs, got the CWM
lastly I flash the abyssnote kernel
so is my SGN now contains a KJ1 rom?
can i flash back to LA2 without losing the root?
or is there any big differences between KJ1 & LA2??
& one more, I want to add the battery %, where can i find/search the suitable one for my SGN
Thanks!
Click to expand...
Click to collapse
Now you can flash to la2 with CWM n keep cf-root when ask
Or use mobile odin n enable everroot option in mobile odin n flash
Sent from my GT-N7000 using xda premium
Thank you so much ketan!
I got LA2 n keep the cf-root now!
One thing I want to ask :
Is any roms to flash can follow the below procedure?
or which situations cannot follow this procedure:
Thanks.
2. CWM recovery (you need Root + CWM on existing ROM. Get )
Download the ROM. Extract it.
Create folder /sdcard/external_sd/firmware (thats folder "firmware" (lowercase) on your external SD card) (see image)
Click to expand...
Click to collapse
This is for Stock ROM only
If you want to flash custom rom, u have to select flash zip option, not 'flash stock firmware' option

Criskelo's ICS 10.1 instalation guide

hi there, can someone guide me how to install criskelo ics 10.1 rom, i use to flash rocketrom before, so i think i got some skill on flashing custom rom...but itried to flash criskelo 9.1 last week n the result my note got hard brick, cant turn to download mode or recovery mode... luckily, i still got waranty on my note and sent it to SS n get new board as replacement...so can some one guide me the safest way to flash this rom...now im on stock ics 4.0.3 rom n rooted...
CRISKELO IS A VERY GOOD ROM BUT TRY WAIT A LITLE MORE TIME GET BETTER IN HIS VERSION ICS BECAUSE I AND A LOT OF PEOPLE HAVE A LOT OF PROBLEMS , THE SAME WAY YOU INSTALL ROKET YOU INSTALL CRISKELO,
BUT IF YOU WANT TO CONTINUE THIS IS THE STEPS
FROM THE ORIGINAL GB
ROOT YOUR PHONE WHIT CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5
THEN INSTALL ABISS KERNEL REDPILL GO TO ADVANCE AND REBOOT RECOVERY
WIPE DATA, CACHE,DAVLICK CACHE
AND INSTALL THE CRISKELO ROM
BUT TO ME IN THIS WAY THE ROM CONTINUE TO GIVE ME PROBLEMS:
SUPERSU ASKING FOR PERMISS FOR ALL APPS
BATTERY PERCENT NOT SHOW CORECTLY
IN THE OTHER HAND CRISKELO VERSION 7 IS A ROM WHITOUT ANY PROBLEM VERY RECOMMNDED:good:
so which rom is best for now
If I were you, I would:
1. Download abyss kernel (this is a gb kernel so it should be safe)
http://downloadandroidrom.com/file/...rnel/AbyssNotekernel42CWTouchOriginalLogo.zip
2. Install abyss from cwm (don't do any wipes)
3. Still in cwm, go to advance and reboot cwm
4. Do the three wipes (cahe, dalvik and factory)
5. Install criskelo's rom
It should be done.
That's how I installed,
I'm using criskelo's rom with glnotecore kernel and everything works fine.

HELP! My phone is something not working :(

Hi, I have a stock ROM on my Galaxy Mini ... But something naryłem and after installing any ROMs (modified, eg CyanogenMod7), stands on the boot ... I have uploaded the new clean ROM and boot.img (which I once worked). And it stops. What do I have 3 days to tire and reinstalls ROM. : (
Work only stock ROMs...
Change the baseband
aifam5 said:
Hi, I have a stock ROM on my Galaxy Mini ... But something naryłem and after installing any ROMs (modified, eg CyanogenMod7), stands on the boot ... I have uploaded the new clean ROM and boot.img (which I once worked). And it stops. What do I have 3 days to tire and reinstalls ROM. : (
Work only stock ROMs...
Click to expand...
Click to collapse
Install ClockWorkMod or RZ recoeryand try to flash and also wipe data and cache before and fter you install... Its very imp fro wipe data and cache..
Try it or say the procedure what you did and what version of stock rom are you using coz we shud hav gingerbread so..:good:

[Q] Back to stock rom help

Hi guys.. Is there anyway i can get back to stock rom from MIUI rom? i flash Dr.Ketan ics stock rom but got stuck at Samsung logo.. any help?
Did you wipe cache and dalvic? DO NOT WIPE DATA USING STOCK ICS/KERNAL
Maby you could try flashing pre rooted GB Rom from our Doctor and wipe data once on safe GB. That's a good startingpoint.
By the way,stock ICS is NOT safe to wipe data with so I hope you didn't.
Download the below rom and install it via pc odin. The don't boot up yet. First boot into recovery and the. do a wipe data factory reset and then boot up.
N7000XXKL3 ------ 2.3.6 2011 December-------- N7000ODDKL1 --------------------India ----------------------------- from
http://forum.xda-developers.com/showpost.php?p=20963718&postcount=2
Download the below rom and install it via pc odin. The don't boot up yet. First boot into recovery and the. do a wipe data factory reset and then boot up.
N7000XXKL3 ------ 2.3.6 2011 December-------- N7000ODDKL1 --------------------India ----------------------------- from
http://forum.xda-developers.com/show...18&postcount=2
Click to expand...
Click to collapse
Thank you.. will try it.. Will keep you updated.
Did you wipe cache and dalvic? DO NOT WIPE DATA USING STOCK ICS/KERNAL
Maby you could try flashing pre rooted GB Rom from our Doctor and wipe data once on safe GB. That's a good startingpoint.
By the way,stock ICS is NOT safe to wipe data with so I hope you didn't.
Click to expand...
Click to collapse
well, before i flash the stock ics rom.. I wipe data/factory reset on cwm in MIUI Rom.. is it affect anything?
here is what i did and worked
HR7 said:
well, before i flash the stock ics rom.. I wipe data/factory reset on cwm in MIUI Rom.. is it affect anything?
Click to expand...
Click to collapse
i downgraded back from JB custom roms to stock german 4.0.4 because of its good battery life ..
1) be sure u are using a safe rooted kernel .. i used hydracore 4.3
2) download any gb stock rom from dr ketan's .. i myself downloaded the german one
3) on ur rooted custom rom, downloaded mobile odin pro .. it will ask for some updates
4) extract the downloaded stock gb rom , click on open files , choose the tar file , dont change anything , and then flash
5) after flashing is done i had a probl that it kept starting on the samsung logo .. dont panic just rstart in recovery mode and do wipe cache and data .. the gb is safe to do wipes .. NOW UR ON GB STOCK ROM and it's rooted
6) just downloaded the latest german ics from the same thead .. extract it and flash it using mobile odin BUT DONT WIPE ANYTHING AFTE IT'S DONE
7) it will reboot , install some updates ( dont panic it might take some time) and now you have the latest stock ics and its rooted and ready to flasb any good kernel
i dont know what kernel is the best for both battery life and performance
i downgraded back from JB custom roms to stock german 4.0.4 because of its good battery life ..
1) be sure u are using a safe rooted kernel .. i used hydracore 4.3
2) download any gb stock rom from dr ketan's .. i myself downloaded the german one
3) on ur rooted custom rom, downloaded mobile odin pro .. it will ask for some updates
4) extract the downloaded stock gb rom , click on open files , choose the tar file , dont change anything , and then flash
5) after flashing is done i had a probl that it kept starting on the samsung logo .. dont panic just rstart in recovery mode and do wipe cache and data .. the gb is safe to do wipes .. NOW UR ON GB STOCK ROM and it's rooted
6) just downloaded the latest german ics from the same thead .. extract it and flash it using mobile odin BUT DONT WIPE ANYTHING AFTE IT'S DONE
7) it will reboot , install some updates ( dont panic it might take some time) and now you have the latest stock ics and its rooted and ready to flasb any good kernel
i dont know what kernel is the best for both battery life and performance
Click to expand...
Click to collapse
Download the below rom and install it via pc odin. The don't boot up yet. First boot into recovery and the. do a wipe data factory reset and then boot up.
N7000XXKL3 ------ 2.3.6 2011 December-------- N7000ODDKL1 --------------------India ----------------------------- from
http://forum.xda-developers.com/show...18&postcount=2
Click to expand...
Click to collapse
Thank you guys!! now my phone is back! thank you
hi guys.. i'm on ICS 4.04 with CRISKELO last ROM..
i'd like simply to go back to 4.0.4 stock ( rooted)
but what i really want to do is to CLEAN completely my phone.. WIPE FACTORY!!
can you please tell me the steps i should do?
thank you!
Download the same roms as above. install it and do a factory reset from recovery. The u can download ics and install it again.
nokiamodeln91 said:
Download the same roms as above. install it and do a factory reset from recovery. The u can download ics and install it again.
Click to expand...
Click to collapse
i can't just skip going back on GB?
you cant
Sent from my GT-N7000 using xda app-developers app
yes u can. install ics.. then install a safe kernel. then do a wipe and the. format usb storage.
I recommend philz kernel cuz it can be flashed from stock recovery.
---------- Post added at 03:41 PM ---------- Previous post was at 03:40 PM ----------
installing this kernel. will give u root, cwm. and is safe as well.
all threads say its dengerous , i guess you should stay in thr safe side and it costs you nothing by the way .. all flashing is done using mobile odin and it doesn't takr any time , just couple of minutes and booooo you're safe
Sent from an Egyptian GT-N7000 ♥
el5arsawi said:
all threads say its dengerous , i guess you should stay in thr safe side and it costs you nothing by the way .. all flashing is done using mobile odin and it doesn't takr any time , just couple of minutes and booooo you're safe
Sent from an Egyptian GT-N7000 ♥
Click to expand...
Click to collapse
I'm using right now philz kernel and things are going very well really!
the point is i wanted to do a DEEP CLEAN of the phone.. and than install 4.0.4 LRQ stock and root it but stupid KIES doesn't recognize my phone anymore ( before was just working perfectly... )!!!
Would it work IF i ... copy the stock rom on my mobile..
reboot in recovery.. do the 3 wipes
restart recovery,,, (or maybe i don't even need to reboot..???)
flash the rom LRQ stock ?
or still i've first to install PHILZ kernel again?
little bit confused lol
if u want to clean install then go back to GB and then do a factory reset and format internal SD then download the stock firmware u want and install it via PC odin.. stock firmware comes in tar.md5 format. cwm wont be able to install it. u need odin or mobile odin

[Q] changing from RocketRom ICS -> ParanoidAndroid CM10/AOSP

Hi all.
I'll make it concise. I'm not really sure about the way to change my custom rom from Rocket Rom (I'm currently at V12) to ParanoidAndroid - CM10/AOSP based (current latest version is 2.51, I believe). I've read through the instruction, but it really confuses me. Any advice/instruction will be highly appreciated.
Thank you in advance.
P/s: my kernel is NoteCore_v14.1
You are on a safe kernel
So simply copy the rom into your sdcard and flash through cwm recovery
Hi,
To be able to flash paranoind and get as less bugs as possible , please do the following :
1. Make sure you are on a safe kernel ( if not download 1 and copy it on you phone )
2. add paranoind on your phone , start into recovery ( if your current kernel is not a safe, flash the one you have just downloaded) and do a full wipe ( data , partition , dalvik )
3. flash paranoid android
4. flash gapps from 11/10/2012
Don't flash any custom kernel over paranoind android , I think they must get updated to a new driver
Have fun

Categories

Resources