HELP! My phone is something not working :( - Samsung Galaxy Mini

Hi, I have a stock ROM on my Galaxy Mini ... But something naryłem and after installing any ROMs (modified, eg CyanogenMod7), stands on the boot ... I have uploaded the new clean ROM and boot.img (which I once worked). And it stops. What do I have 3 days to tire and reinstalls ROM. : (
Work only stock ROMs...

Change the baseband

aifam5 said:
Hi, I have a stock ROM on my Galaxy Mini ... But something naryłem and after installing any ROMs (modified, eg CyanogenMod7), stands on the boot ... I have uploaded the new clean ROM and boot.img (which I once worked). And it stops. What do I have 3 days to tire and reinstalls ROM. : (
Work only stock ROMs...
Click to expand...
Click to collapse
Install ClockWorkMod or RZ recoeryand try to flash and also wipe data and cache before and fter you install... Its very imp fro wipe data and cache..
Try it or say the procedure what you did and what version of stock rom are you using coz we shud hav gingerbread so..:good:

Related

[Q] [HELP]Unable to flash SGS i9000 (assert failed:getprop)

edit
edit
no prob, jst flash latest jvu semaphore kernel through odin, it will also over write ur cwm then flash any rom u want. if prob persist then flash whole latest jvu rom pkg through odin by repartotion. this will renew ur fone n no data will exist chers !
edit
edit
you might have used a wrong ROM for your device, can you try going to recovery menu>mounts and storage>format system
edit
edit
you can try to flash this rom with odin --> http://sourceforge.net/projects/ficeto.u/files/JVU/JVU-RE.zip/download
it's JVU RE GT-I9000 ( DarkysRom )
after you've flash this make a fully wipe.
Then go to recovery
Flash your Rom , after this
reboot ( do not make a full reboot ! , only recovery reboot ! )
When you're again in the recovery wipe data/factory reset & wipe cache
and flash your rom again
-GOOD LUCK
edit
edit
amashaym said:
i was able to flash CNA 1.3.3 successfully from Gamerz Rom v6.5....yet i wish to know why i had that error....coz i take all precautions and that error wreaked my entire day
THANKS to everyone who help
Click to expand...
Click to collapse
If you have this again , just use the small guide
try flashing semaphore 0.9.1 , i think pppl reported this issue with aokp build 27
Final words frm me
Finally i wana say, dnt try cm roms as those roms doesn't work always either cm7 or cm9. i personally on jvu rom which is latest samnsung rom and didnt tried cm, use any jvu rom from any dev like gamers rom, simplicity(best n full featured rom which i m using) all will work gud cz devs only modify ui and do some tweaks so there is less chance of bugs as compared to cm roms cz they modified core or rom

Please help, Stuck on Paranoid android animation.

Hello,
I was using the Anidroid Rom with my galaxy note.
Then I flashed it with abyss, and and wipe out data/factory reset.
then installed Paraandroid, and then gapp-hybrid.
But my phone starts and stuck on paranoid android animation at start.
I even tried to wipe all data again, even used darkside cache wipe and super wipe also.
But still no luck, Please help me to get paranoid android.
jeet.chaudhari said:
Hello,
I was using the Anidroid Rom with my galaxy note.
Then I flashed it with abyss, and and wipe out data/factory reset.
then installed Paraandroid, and then gapp-hybrid.
But my phone starts and stuck on paranoid android animation at start.
I even tried to wipe all data again, even used darkside cache wipe and super wipe also.
But still no luck, Please help me to get paranoid android.
Click to expand...
Click to collapse
Were you rooted on the base Android ROM? Was it GB? Whatever it was, first flash a standard GB using PC ODIN and then root it and then try a new ROM. You can get stock GB ROMs here
Cheers!
smaiitm said:
Were you rooted on the base Android ROM? Was it GB? Whatever it was, first flash a standard GB using PC ODIN and then root it and then try a new ROM. You can get stock GB ROMs here
Cheers!
Click to expand...
Click to collapse
Hi i flashed with PC odin after downloading stock rom from the link you gave, then i flashed Paranoid again, and later Gapps hybrid, but everytime i still stuck on the same oot animation.
I have even tried, full wipe means not only factory reset and cache wipe, but also format /data, format /system and and format /cache. but still no luck, stuck again.
I even have tried then darkside cache wipe 1st time, but not solved, then i also used darkside super wipe, but still no luck.
My phone is rooted, is there any other solution or anything that i am forgetting to do?
please help...!
smaiitm said:
Were you rooted on the base Android ROM? Was it GB? Whatever it was, first flash a standard GB using PC ODIN and then root it and then try a new ROM. You can get stock GB ROMs here
Cheers!
Click to expand...
Click to collapse
IT was ANIDROID ROM Which i was using from here http://forum.xda-developers.com/showthread.php?t=1761190 , before, but now i am using stock GB 2.3.6 which is also rooted, everytime i flash Paranoid Android, it stucks at boot animation, then i have to use restore.
jeet.chaudhari said:
IT was ANIDROID ROM Which i was using from here http://forum.xda-developers.com/showthread.php?t=1761190 , before, but now i am using stock GB 2.3.6 which is also rooted, everytime i flash Paranoid Android, it stucks at boot animation, then i have to use restore.
Click to expand...
Click to collapse
I am having a similar problem, but instead of getting stuck on boot screen my mobile goes back in CWM. I am trying to install LiquidSmooth 3.2 and am currently on Criskelo 5.1....when I tried to go from Criskelo 5.1 to 8, the phone got stuck on the boot screen. (Used Abyss Kernel to flash)
tariqsaleem said:
I am having a similar problem, but instead of getting stuck on boot screen my mobile goes back in CWM. I am trying to install LiquidSmooth 3.2 and am currently on Criskelo 5.1....when I tried to go from Criskelo 5.1 to 8, the phone got stuck on the boot screen. (Used Abyss Kernel to flash)
Click to expand...
Click to collapse
I also tried to doing flash with abyss and speedmod also, but none was successfull, i do not get any error message, but after doing all procedure when i reboot my device, it is started but when paranoid logo appears, it goes in loop, may be this only called as boot loop, i tried 9-10 times doing all this, finally restored GB now, Lets see for solution then i will try again, to flash paranoid android.
When in bootloop, remove battery and try agaim after 10 minutes.
Sent from my GT-N7000 using xda app-developers app
praetorius said:
When in bootloop, remove battery and try agaim after 10 minutes.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Ok, Let me try this and check this.
jeet.chaudhari said:
Ok, Let me try this and check this.
Click to expand...
Click to collapse
Unfortunately removing battery for 10 mins, in boot loop didnt help anything, Please help...!
Sir which state are u now?
Sent from my GT-N7000 using xda premium
adamskoc said:
Sir which state are u now?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Currently i am at a state where nothing is working, paranoid, anidroid, all seems like trouble, paranoid stucks at animation, anidroid dont go further than start boot screen.
may be only STOCK GB will be working now. trying that via odin.
The mistake u have done acording to your explanation on paranoid thread on 7 th step after flashing para v5 u again made a full wipe... try gb ... if success start from the beginning...
İf gb stucks on boot go to Recovery wipe cache and under advanced wipe dalvik...
Waiting ....
Sent from my GT-N7000 using xda premium
Any news?
Sent from my GT-N7000 using xda premium
jeet.chaudhari said:
Hi i flashed with PC odin after downloading stock rom from the link you gave, then i flashed Paranoid again, and later Gapps hybrid, but everytime i still stuck on the same oot animation.
I have even tried, full wipe means not only factory reset and cache wipe, but also format /data, format /system and and format /cache. but still no luck, stuck again.
I even have tried then darkside cache wipe 1st time, but not solved, then i also used darkside super wipe, but still no luck.
My phone is rooted, is there any other solution or anything that i am forgetting to do?
please help...!
Click to expand...
Click to collapse
Flash stock GingerBread rom from PC odin and root it . Else you can flash pre rooted GB roms like Checkrom, rocketrom etc etc etc from the whichever ICS rom you are currenntly on .This is how I flash Gingerbread rom from EMMC bug infected ICS rom , flash abyss kernel 3.9 and the reboot recovery into abyss kernel 3.9 and then wipe data , cache and dalvik cache and then flash CheckRom Revo HD V6 and reboot your phone.
Once your phone is successfully running GB rom with proper root and clockworkmod recovery , go to clockworkmod recovery and wipe data , cache , dalvik cache and flash paranoid android directly ( dont flash abyss kernel or any other kernel , GB rom with CF root kernel or whichever kernel the pre-rooted GB roms like checkrom and rocketrom come with ) , and finally after flashing wipe data , cache and dalvik cache . You will boot paranoid android properly .
I dont want you to brick your phone , so explained the whole process from gingerbread rom installation
---------- Post added at 09:45 PM ---------- Previous post was at 09:32 PM ----------
Download link for XXLC1_CheckROM_NoteHD_V6 :
http://checkrom.com/download/
Also download abyssnote kernel 3.9
Archangel919 said:
Flash stock GingerBread rom from PC odin and root it . Else you can flash pre rooted GB roms like Checkrom, rocketrom etc etc etc from the whichever ICS rom you are currenntly on .This is how I flash Gingerbread rom from EMMC bug infected ICS rom , flash abyss kernel 3.9 and the reboot recovery into abyss kernel 3.9 and then wipe data , cache and dalvik cache and then flash CheckRom Revo HD V6 and reboot your phone.
Once your phone is successfully running GB rom with proper root and clockworkmod recovery , go to clockworkmod recovery and wipe data , cache , dalvik cache and flash paranoid android directly ( dont flash abyss kernel or any other kernel , GB rom with CF root kernel or whichever kernel the pre-rooted GB roms like checkrom and rocketrom come with ) , and finally after flashing wipe data , cache and dalvik cache . You will boot paranoid android properly .
I dont want you to brick your phone , so explained the whole process from gingerbread rom installation
---------- Post added at 09:45 PM ---------- Previous post was at 09:32 PM ----------
Download link for XXLC1_CheckROM_NoteHD_V6 :
http://checkrom.com/download/
Also download abyssnote kernel 3.9
Click to expand...
Click to collapse
Really Thank You for your detailed Reply, But as you said I wastrying this all from STOCK GB Rom only which i rooted, But in paranoid one of senier member told me that, as i used darkside scripts and which are not made for Note, So I have screwed my partitions, and may be i will need to repartition with four filed STOCK ROM. because now the problem is even critical, when i flash, it stucks at SAmsung Note GT-N7000.
So really need to solve this issue 1st, so starting new thread now, for flashing Stock Rom with odin for repartition.
adamskoc said:
Any news?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sorry for late reply, i am currently on stock GB by the way u said. but still i am not able to use any custom rom.
As i mentioned in last post, may be i need to flash stock rom with repartitions, so now after searching and reading all posts and google i am starting new thread for this strange problem.
Still thank You for your help.
jeet.chaudhari said:
Really Thank You for your detailed Reply, But as you said I wastrying this all from STOCK GB Rom only which i rooted, But in paranoid one of senier member told me that, as i used darkside scripts and which are not made for Note, So I have screwed my partitions, and may be i will need to repartition with four filed STOCK ROM. because now the problem is even critical, when i flash, it stucks at SAmsung Note GT-N7000.
So really need to solve this issue 1st, so starting new thread now, for flashing Stock Rom with odin for repartition.
Click to expand...
Click to collapse
Well I will help you for sure , XDA's philosophy :good:. Well I want you to check whether you have EMMC brick bug in your kernel . Let me ask you sth , have you ever done a data wipe while on stock ICS roms ??? And dont worry my friend , i can help you reset your partitions as i have done this many times
Archangel919 said:
Well I will help you for sure , XDA's philosophy :good:. Well I want you to check whether you have EMMC brick bug in your kernel . Let me ask you sth , have you ever done a data wipe while on stock ICS roms ??? And dont worry my friend , i can help you reset your partitions as i have done this many times
Click to expand...
Click to collapse
Thanx Friend,
I have flashed b4 from stock ICS kernal to Anidroid ROM, but now that is not the real problem, now i am on stock GB Rom, which i have installed via Odin, Kindly check http://forum.xda-developers.com/showthread.php?t=1783625 this thread which i have just started, i hope you will understand my problem by looking to this thread, also as i am on GB kernal right now, without rooted, so still i dont need to afraid of EMMC brick bug (I assume it is problem with stock ICS kernals.).
And I had screwed my galaxy bote and had hard bricked my phone , it was gone mate , my phone had almost seem its last days , but i did save it and gave it a new life . Well here is what happened ( again in detail ) - I was KingDroid V2 rom , even when i knew all the ics roms at that time had emmc brick bug , I was fool enough to do a data wipe :crying: , and **** !!!! my phone did boot any rom , i was not even able to flash any rom , not even stock unrooted samsung roms via pc odin . I couldnt even get my phone into recovery mode !!!!!! The only thing that was working on my phone was the download mode !! Thank god !!!!:fingers-crossed: . I tried to re-partition using the original 16GB pit file( as i have 16GB Galaxy note N7000 ) but it was in vain. And then I read some post in XDA developers which mentioned how to RE-ARRANGE the partition.
[ Well I think you don't know what happens when you do a data wipe with emmc bug infected kernel ???? Right ? well here goes an explaination fro that , (i love explaining things to others :cyclops In simple words when you do a data wipe on an EMMC bug infected kernel a part of your internal SD card gets infected , I mean it becomes non-functional , it doesn't respond to read /write commands issued over that sector of internal SD ]
so out of my 16GB internal memory , memory sectors from 1049MB to 2200MB had got corrupted( found it by trial and error method ) , i couldn't use them anymore , so using the adb from the android platform tools , I edited the partitions and shifted the partition corresponding to 1049 MB to 2200MB, and then flashed abyss note kernel and then checkrom revo HD :fingers-crossed: . Viola my phone booted , I had got over the hard brick , but my internal storage had reduced to 10 Gb instead of 11 Gb due to unresponsive sectors in internal memory !!!
Next i did a reset of the flash counter and removed the yellow triangle and flashed the stock gingerbread rom (Indian version , where I am from ) via pc odin and it got stucj at FactoryFS stage , as expected !!!! . Next I handed it to Samsung service center and just told them that i was trying to update to ICS via kies and it got stuck . After few days they replaced my phone's motherboard for free :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
My friend i think your prob started while flashing paranoid rom u said that after flashing rom u made a full wipe... so i think u lost your root... just an idea
İf u can find a prerooted gb rom or u can root your gb rom u can flash paranoid rom
Sent from my GT-N7000 using xda premium

Help newbie with installing new ROM

Hi, I'm stuck with installing new rom, so I hope, that you'll help me.
There are steps what I've done:
- followed THIS topic and ROOT the device with ODIN and CF-Root 4.4 file.
- OKAY, I'm rooted, so let's flash the new ROM
- entered in Clockworkmod Recovery and format EVERYTHING ( /data, /system, /cache, /sdcard etc.... just everything) for clear system
- next I load package with ROM and than INSTALLL
and here is the most important part
- when installed ROM gets something like bootloop but with restart - ROM is loading and after about 40 sec its RESTART
- and the same thing over and over again - restart ->loading->restart.... System never start up correctly to the end
- then when I saw that it does not work, I tried go into the CWM, but there was no CWM (!!!) - it was erased (by installing new ROM maybe???)
- so I must flash (old and stock) ROM via ODIN and again root device with CF-Root (with CWM) - that was only functional rom, what I was able to run, and again did this procedure
I tried this way, perhaps with millions of different ROM and EVERY was stucked (restart) while loading.
I think there are some non-deleted files in device, which should be erased (and which cannot be erased by CWM) for clear start of new installed ROM, what do you think?
Would someone please help me? I don't want old Gingerbread with Kies
Thanks for every responce!
Does it say in the thread that you have to flash a custom kernel?? Give.me the link for the thread so I can make sure that you've done everything right
Sent from ma 5assak
there is a link, but in hypertext THIS, i repost it in full text:
http://forum.xda-developers.com/showthread.php?t=788108
I think, when I've root and CWM, there is no problem and install a new rom will be very least, so not as it seems
Dude this is a kernel not a rom what's the matter with you??:what:
Sent from ma 5assak
please read all my topic - i flash this kernel only for clockworkmod recovery
through CWM I can flash any other rom
through ODIN only stock - cant find any ICS or JB rom which I can flash via ODIN (.tar file)
What variant of i9000 do you have? Are you sure that the rom you are trying to flash is made exactly for your variant?
EDIT: Try Darky ROM, they have an ODIN flashable version called "Resurrection Edition" or something.
I mean give me the link for the Rom you are using not kernel
Sent from ma 5assak
Samsung Galaxy S I9000, i'm sure 100%. NOT I9001, NOT Samsung Galaxy S2. Tried many roms from Development section for I9000, tried from get.cm etc... always the same result bootloop with restart
donhashem.dh said:
I mean give me the link for the Rom you are using not kernel
Sent from ma 5assak
Click to expand...
Click to collapse
OK. For example: this rom cm-9.0.0-galaxysmtd and cm-9-20120815-NIGHTLY-galaxysmtd from http://get.cm/?device=galaxysmtd
Or this one last ([ALPHA][ROM][4.1.1] CyanogenMod 10 for Samsung Galaxy S) http://forum.xda-developers.com/showthread.php?t=1778526 and 20120808 build.
and [ROM][PORT][ANDROID 4.1.1][BETA] TAJB: Jelly Bean port for Galaxy S V7.1 http://forum.xda-developers.com/showthread.php?t=1747042
and this too [4.0.4][ROM] Dark Knight 5.5 [27/4/2012] http://forum.xda-developers.com/showthread.php?t=1510940
and many more....
realy unhappy from this
Nikishek said:
Samsung Galaxy S I9000, i'm sure 100%t
Click to expand...
Click to collapse
I meant I9000 or I9000B or I9000M or I9000T there's a difference between them
I9000 only, checked it several times
Ok so you can flash Darky Rom Resurrection Edition through ODIN with no problem. Its GingerBread if i remember correctly, but it should give you a recovery mode and fully operating phone. From this point you can flash whatever you want.
....And there is one more important thing:
When I have a stock kernel and stock rom from Samsung, cant get into recovery mode - VOLUME UP and POWER non functional. Only when I type: "adb reboot recovery" in terminal.
Just after when I flash a new pre-rooted kernel with CWM, VOLUPE UP and POWER is now functional
k4Z3666: OK, I try and give you an echo I think, when I format everything in CWM, there will be no sign of the earlier system and ALL WILL BE CLEAR
Nikishek said:
I9000 only, checked it several times
Click to expand...
Click to collapse
ok, flashing ICS, may need to be done twice, as first flash may bootloop, IF you want to return to stock to get out of this mess, since you are not sure as to where you are now, due to flashing many roms, use any kit from My Android Collections, link below to get you to a booting ROM, than add a kernel with CWM (use EZbaze package with kernels)
that's helped me too thank you
Sent from my GT-I9000 using xda app-developers app

[Seek help] fail in booting system....sigh

Hi all,
give some information first.... at the beginning, i used rom manager to flash clockwork recovery 6.0.1.2, later i hv flashed cm10.1 rom, but i found that the resolution has some problem, so i want to flash back to stock rom... And then i go to this site http://forum.xda-developers.com/showthread.php?t=1901191, to install PhilZ-cwm6 (which is safer for installing stock rom?? i dont know).... After i hv applied the zip in the recovery mode, i found that i cant boot into the system (btw i hv wipe data and cache)
besides, i hv tried odin v1.87, but my pc cant connect with my phone (in download mode)...
what can i do Is my phone bricked?
Sorry for my poor English.
Thank You Guys!!
Problem fixed!!
after i hv installed samsung kies, odin can detect my phone!
Everything is fine now!:laugh:
kclam730 said:
Hi all,
give some information first.... at the beginning, i used rom manager to flash clockwork recovery 6.0.1.2, later i hv flashed cm10.1 rom, but i found that the resolution has some problem, so i want to flash back to stock rom... And then i go to this site http://forum.xda-developers.com/showthread.php?t=1901191, to install PhilZ-cwm6 (which is safer for installing stock rom?? i dont know).... After i hv applied the zip in the recovery mode, i found that i cant boot into the system (btw i hv wipe data and cache)
besides, i hv tried odin v1.87, but my pc cant connect with my phone (in download mode)...
what can i do Is my phone bricked?
Sorry for my poor English.
Thank You Guys!!
Click to expand...
Click to collapse
For the future:
Philz kernel is used for TouchWiz ROM's (based off what samsung gives us). You flashed a TW kernel onto a CM 10.1 ROM. If you still want to try out CM, then boot into recovery, do a full wipe, flash CM and gapps. After that is done perform a data wipe (factory reset) through recovery

[Q] wich stock rom ?

hi
i have a galaxy gt-s5830 with android 2.2.1 and i want to download the stock rom but all i see its for androd 2.3 can i use them? or wich one should i use??
problitz said:
hi
i have a galaxy gt-s5830 with android 2.2.1 and i want to download the stock rom but all i see its for androd 2.3 can i use them? or wich one should i use??
Click to expand...
Click to collapse
First upgrade your device to Gingerbread using Odin, follow this guide
hubix's guide
Then root your device and install CWM (custom recovery) in order to flash custom roms, doing backups, flash mods ... here you'll find all
Usefull Thread with lots of info and FAQ
Finally choose the rom you want and follow the dev's instructions to flash the selected rom
thx a lot just one more question in the Newest firmware says vietnam and im from portugal is there any problem with that?
problitz said:
thx a lot just one more question in the Newest firmware says vietnam and im from portugal is there any problem with that?
Click to expand...
Click to collapse
The latest fw it's from Vietnam?? umm
There's no problem, but I suggest you to flash an European fw in order to avoid signal/coverage troubles because of each fw includes a modem from a different area. For me the Spanish KTM is the best
thx again i can root my phone but following the hubix tuturial trying to flash the newest firmware in odin i only can find the .ops file i cant find the boot and the others... i downloaded all the files e said to download but cant find them in all those files can help me?
problitz said:
thx again i can root my phone but following the hubix tuturial trying to flash the newest firmware in odin i only can find the .ops file i cant find the boot and the others... i downloaded all the files e said to download but cant find them in all those files can help me?
Click to expand...
Click to collapse
Here is the link on how to install stock rom using odin along with all firmwares and drivers (check the "Preparations" section),
Flash stock rom on Samsung Galaxy Ace S5830 using odin
You can find all the necessary details for flashing as well as all the firmwares in this link. If your PC cannot recognize the phone, its usually the drivers. Once installed, go to recovery mode and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace (just install these zip from the recovery mode),
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
You can use the single firmware installation. No need to download files like boot, pda, etc separately. Also you can download the firmware near to your region. Hope I Helped
thx that help a lot just missing the firmware for portugal to be perfect
problitz said:
thx that help a lot just missing the firmware for portugal to be perfect
Click to expand...
Click to collapse
Glad I could help
SamMobile
problitz said:
Just missing the firmware for Portugal to be perfect
Click to expand...
Click to collapse
Download It From SamMobile.com :laugh::victory::highfive:
i did it and intalled this custom rom http://forum.xda-developers.com/showthread.php?t=2635011 i like it but when i shutdown my phone and turn on again it gets stuck in the samsung logo and restars all the time i have to wipe the cashe for it to start normaly wath is this can i solve this? and wath is the more stable custom rom?
thx
problitz said:
i did it and intalled this custom rom http://forum.xda-developers.com/showthread.php?t=2635011 i like it but when i shutdown my phone and turn on again it gets stuck in the samsung logo and restars all the time i have to wipe the cashe for it to start normaly wath is this can i solve this? and wath is the more stable custom rom?
thx
Click to expand...
Click to collapse
Before you do any of these things, make sure to backup you apps. Go to CWM and do "Wipe data/ factory reset" and "Wipe Cache partition". Also go to Mount and Storage> Format /system. Finally Advanced> "Wipe Dalvik Cache" and "Wipe Battery Stat". Now reinstall the rom again. It might solve the issue. As for the stable custom rom, you can always go with CM 7 i.e. Android 2.3.7 based roms. CM 7 based roms are much stable than CM 9, CM 10 and CM 11 roms. As per xda rules, I cannot suggest you the best rom. But here is list of all roms for our Ace. You can flash this yourself to decide which is the best. Here is the link,
Know your Device:Galaxy Ace GT-S5830 ~Root~Odin~CWM~ROM LIST
Hope I Helped
i did that but still have the same problem i get a light blue screen and black and it just restarts i really liked this rom
i will try other thx anyway for the rom list
i installed the stock rom but after that it just wont start i had to install the custom rom and do wipe cache again for it to start
problitz said:
i installed the stock rom but after that it just wont start i had to install the custom rom and do wipe cache again for it to start
Click to expand...
Click to collapse
Once you have installed the stock rom, go to recovery mode and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur).
i did but still same problem
if i only restart the phone this doesnt happen, only when i shut it down i cant understand this and its so annoying
problitz said:
if i only restart the phone this doesnt happen, only when i shut it down i cant understand this and its so annoying
Click to expand...
Click to collapse
after flasing a stock rom via Odin, do wipe factory/reset and wipe cache in order to avoid the bootloop, but with CM10.x ROMS NEVER DO WIPES (data factory/reset) OR YOU'LL BREAK THE BOOT!!
To fix it do all the wipes and reflash the CM10.x rom following dev's thread
Viper The Ripper said:
after flasing a stock rom via Odin, do wipe factory/reset and wipe cache in order to avoid the bootloop, but with CM10.x ROMS NEVER DO WIPES (data factory/reset) OR YOU'LL BREAK THE BOOT!!
To fix it do all the wipes and reflash the CM10.x rom following dev's thread
Click to expand...
Click to collapse
i think i have done that already but im not sure my phone is charging i will download another stock rom to try it then i will post the results thx
Viper The Ripper said:
after flasing a stock rom via Odin, do wipe factory/reset and wipe cache in order to avoid the bootloop, but with CM10.x ROMS NEVER DO WIPES (data factory/reset) OR YOU'LL BREAK THE BOOT!!
To fix it do all the wipes and reflash the CM10.x rom following dev's thread
Click to expand...
Click to collapse
i did it all twice the stock rom all good installed the custom rom all good shut the phone down same problem again...
but if i shut down the phone and start with the CWM and just select reboot system now it starts without loop i cant understand this
problitz said:
i did it all twice the stock rom all good installed the custom rom all good shut the phone down same problem again...
but if i shut down the phone and start with the CWM and just select reboot system now it starts without loop i cant understand this
Click to expand...
Click to collapse
Might be the problem with the custom rom. Try installing some other custom rom and see if the problem persists. Do post the result. Hope I Helped

Categories

Resources