Related
I will soon be opening up my phone (T-mobile Pocket PC Phone Edition) to replace the glass screen with a new one ordered online. I've never even opened the phone before and was wondering if someone has performed this operation before. I would really appreciate any pointers, tricks, cautions, pictures, etc.
Thanks.
lawrence... where did u get the replacement??
i wonder if they got replacement cases! i chiped mine
The company I bought the screen from was GetHighTech, Inc, in California. By coincidence, they are about an hour's drive away from my home.
They only sell the glass screen and high capacity battery replacements. The screen comes with absolutely no documentation or instructions. I just got it a few minutes ago.
just wanted to see if you had any luck with the changeout.
Screen replaced successfully: observations
It was a tricky operation, but I finally managed to replace my broken touch screen. And the patient is alive, and only a little worse off for the experience.
I was held back for a week until I could get the right size torx screwdrivers to remove the back cover. Once inside, it was a very very tricky process slicing off the broken screen with a razor blade. It was glued to the lcd display. This would have been hard even if the screen was not shattered. Definitely needed goggles to protect against flying splinters of glass. I used cotton swabs and 99% alcohol to clean the glass dust off the glue around the edges of the lcd, then I put the new screen on while that residual gum was still a bit tacky.
There was a very thin existing plastic cover over the lcd in between the glass touch screen and the rest of the lcd. Since it did not come off with the glass, I left it in place even though it had a couple of small scratches from contact with the broken glass. It seems like it was there to keep dust off the lcd or something like that.
This was my first time inside the phone. I noticed that replacing the whole LCD component would have been a trivial task by comparision to replacing the glass alone. And even easier would have been adding a new battery.
cracked lcd on xda
hi, does anybody know where i can get a replacement for the lcd screen on my xda... its totally mashed and i need to unlock it but the screen is bad...
i live in uk... any ideas guys..
pls help out
has anyone give me pls an idea how much a new replacement screen for XDA might cost
currently I am having two XDA (one XDA and one MDA), MDA has a broken screen ... I'd like to know how much is the material (screen), I have so. to do the actual job of screen replacement
regards, monika
I replaced my touchscreen a few weeks ago. Like Lawrence said it's a little tricky and you need to be patient.
I bought my touchscreen from www.pdasmart.com/pdaphone.htm for $75 and they gave great instructions.
thank you for your kind answer
hmmm, seems like it is nice to live in US ... where all the things for XDA are almost readily available :wink:
regards, monika
Protective Acryclic Cover over the Digitizer
I have an odd problem. I have an SX56 with a broken protective cover. The protective cover is the acrylic sheet that sits between the digitizer and the outside world. Everything else works fine including the digitizer. I have found every replacement part except that cover. I've even tried local plastic stores. They don't carry the proper thickness (0.125mm).
Any thoughts or sources besides sending it in for a $200 repair?
So I dropped my Tilt today and there are several big cracks through the glass front. The phone works fine and I think the LCD screen is alright. I think the cracks are just in the glass part and the LCD is fine but I cant tell. One thing for sure is that the touch response is all messed up and I can't align it. I see digitizers on ebay for cheap. Is that the glass part that is cracked? Can I just get that or do I need a whole screen assembly?
Thanks
I tried to change digitizer but it is a mess you need to weld it to the display and it is not so easy (I'm not an electronic technician), additionally it comes sticked all around the display border so it is hard to clean the display boundary to stick the new digitizer and also it is hard to remove the old digitizer because it is to weak to remove it in one piece. For this reason, at least for my experience, I rather prefer to change the display and digitizer together so you don't have to fight with the removal, welding and sticking the new digitizer. Hope help you take decission.
hello people i sat down the other night and looked at my poor i9000 the glass was smashed to bits so i had the silly fort in my head to see if i can get the glass away from the screen ...... and..... IT CAN BE DONE!!!!!!!!! now i have on order a new oem glass from ebay £6 odd will be here in about 10 days and then will just be glue back in place and done in mean time i have a screen guard stop the screen from being messed up as all it is . is the dit touch and screen .. see pics
daleford2k10 said:
hello people i sat down the other night and looked at my poor i9000 the glass was smashed to bits so i had the silly fort in my head to see if i can get the glass away from the screen ...... and..... IT CAN BE DONE!!!!!!!!! now i have on order a new oem glass from ebay £6 odd will be here in about 10 days and then will just be glue back in place and done in mean time i have a screen guard stop the screen from being messed up as all it is . is the dit touch and screen .. see pics
Click to expand...
Click to collapse
The glass would need to be capacitive touchscreen capable I think?
Would be interesting/good if that is true.
Samsung service centre told me before that the original amoled screen, touch panel and glass comes as a single unit/ part.
Hope you are right.
Sent from my GT-I9000 using XDA App
The capacitive touch panel IS the glass. You cannot order any glass and place it on top of the screen. You need a touch panel, and yes, they come as an assy with the screen.
For 100% You will need a touch panel.
i still have the touch on the screen and am still able to use the phone i know its a oem screen from samsung as the screen was new when got it from shop ... funny how people jump the gun and think that somethink that (cant be done ) can be done im happy to go on fb ring txt and everything else on this phone with the glass OFF!!! and is 100% useable can even upload a video to youtube and will show you lot wrong hahaha whos larfing now ..... my ass you need to go out and buy the whole lot ... no you dont as i have showen you . the way i found out was i had a old samsung i9000 and it was busted to hell . so had a go at taking the screen away from the bk and saw that you have the screen then touch panel glued together then the touch to the glass so i fort with my working i9000 (with cracked glass only) i start tapping away from the front and there you have it . it started to work and then atm to stop me from scraching the touch sheet coz its not glass its like a soft plastic i am using a screen guard and its working a charm .... show me wrong people but im sat here with the glass off my phone and phone still working . i give this job a 9/10 on hardness tho so good luck
glass can be replaced pic shows touch still on screen
in this pic i have showen were the touch ribbon is still on to the touch screen as people still dont believe me that this can be done lmao
daleford2k10 said:
in this pic i have showen were the touch ribbon is still on to the touch screen as people still dont believe me that this can be done lmao
Click to expand...
Click to collapse
hi, if anyone is still interested. this is really pssible, ive separated the outer glass 5 min ago. used a thin sheet of plastic and the heat of a hair dryer. it took me an hour to do so
The glass would need to be capacitive touchscreen
Funny how people can't seem to be able to read.
He's PROVEN separate glass to be the case, it's not a question.
Now whether or not a new glass can be fitted onto the old capacitive layer just like that remains to be seen...
Sent from my GT-I9000 using xda premium
i can CONFIRM, that the outer Gorilla glass is just a tempered glass thats glued to lcd/digitizer assebly with transparent silicone-like glue. the touchscreen works 100% fine without the gorilla glass. ive ordered the replacement for outer glass and will report back when i get it and if it works right with some video footage. unfortunately i wil have to wait for it for about 3 week, because its located in china
Did the new glass worked?
Hello there, since I recently got my glass look like a willow tree at the late autumn (dropped my Galaxy S and the glass is all cracked up) but the touchscreen is still intact and fully operational and working flawlessly I am interested on your progress to know if it's possible to fix just the glass and to get eventual information on how you did it if you succeeded with replacing just the glass, info on where you got a new glass and stuff would also be much appreciated in case your homemade repair worked. Thanks in advance.
Any news? The ten days should be over now....
Same problem
Any news? I have the same problem.
http://www.youtube.com/watch?v=25C3ymJdkVI
IT IS POSSIBLE... but i have failed
Last days i have finally try to change only the glass on my i9000. No success, but i was very close.
After i have clean the remaining glue from the glass that i buy i have follow the steps from the youtube video from post before. I mention that S3 glass seems to be more flexible and the glue a little more soft.
I have warm up the display surface but not to warm (after i remove the main-board and other).
After i have started to take the glass piece by piece with my swiss multi knife (big mistake)
I have proceed with careful until i have started to be more and more sure at me, and, as you can imagine i have make the big mistake - broke the display.
I don't know if in glass removing process or when i have try to remove the remaining glue with a microfiber tissue i have press a little to hard and i broke the display (a little rift).
I have failed but i am sure if you have patience and more appropriate tool you can succeed.
Please take in calculus that without the glue between the two parts the screen is more reflexive and the contrast is not like before. There is no electrical connection between the touch and the display.
Now the touch under the rift on the screen is not working anymore and the phone is almost useless. The top part of display is working perfect!
Sorry for my english and here is some pictures:
Nice
HI.
I've unfortunately caught my XT890's screen with what was probably a set a of keys and have pushed the frame away from the glass at the Sim and SD card slot so that there is approx. a 4 mm gap between the glass and the frame ( the sealant is visible).
The phone's screen continued to work perfectly for about a day until I pushed the frame back into place and appear to have done some damage as the screen slowly stopped working - I had a section of black that appeared at the top of the screen and slowly crept down the screen, which went purple first then black , creeping down the sides of the screen first, then filling in the middle until the full screen is black. I think I've also lost the digitizer input, as I can no longer turn the 6am alarm off on it.. and I can't take out the battery either :S
I've "rebend" the frame to the original damage, but this has had no impact in reverting the screen to "usable".
The glass looks complete - no cracks or anything, so I'm really not sure if replacing the glass screen and digitizer pre-build as a "frame" will fix the problem, or not. At ~£30 for the part on a phone worth ~£70, I'd like to understand if its' worth the risk or just to buy a replacement outright.
Has anyone had similar experience with this?
lol, never seen that before. Looks like the liquid inside the screen slowly dropped out and damaged some internal parts. This will certainly needs replacements. But unless u can do it your self i would consider buying a new one.
How did u bend your phone sides on the first place? (i never tried it, but it seems very sturdy)
I have absolutely no idea how I managed this - I was up a ladder at the time and must of inadvertently put a leatherman or keys in the same pocket as the phone and then "trapped" it so that it pushed sideways on exactly the weak spot of the simcard slot. I'll upload a picture of the damage for prosperity.
I didn't think AMOLED had liquid in them, but that would correlate with the affect I had - it must of been a tiny, tiny hole :S.
Such as shame after 2 years of perfect operation - and I had hoped for another year instead of procuring a new phone as it did the job so well.
Yep, I'm happy to replace it myself, I've done 4 or 5 screens on a Defy before, and this looks simpler.
PS - it looked very similar to the pictures in this, so that's positive in some ways!
http://forum.xda-developers.com/showthread.php?t=2456966
I cracked my screen and bought a new with digitizer. was very easy to replace just follow the youtube video about disassemble razr i.
You will also need some glue though for the stupidly placed motorola logo..
i bought mine from ebay for less than 20 euro. but it has some wierd greenish color in the top where the statusbar is. its not visible when holding the phone vertical. but when holding horizontel its alittle noticeable. not a problem at all but just be carefull going for the cheap ones.
Hi everyone,
Hope my question makes sense - I dropped my phone last night and the screen cracked. Not the LCD, just the glass. But... The touch is perfect. There's just cracked glass.
I saw a listing in eBay that had just the "front glass" cover part for like $6. Naturally, if I can NOT pay $250+ for a fixed phone, that'd be great. So, does anyone know what exactly it is that I'd need to buy to fix this myself?
Thanks in advance!
EDIT: This link has the "glass lens" I was talking about.
http://www.etradesupply.com/motorola-nexus-6-glass-lens-black.html
The glass and digitizer are almost always fused together. If you can get them seperated you'll likely never get the replacement glass attached in a way that will look normal. These things are typically replaced as a unit because of this.
They come glued together and actually removing the glass lens without damaging anything else is very VERY difficult. Best option is to buy a new LCD/digitiser in one and swap them out. I know its expensive but i can ensure you trying to change just the glass is a nightmare!
I've done a couple screens like this and they are a PITA!
If you heat them up enough you can separate the two but in some cases the heat needed damages the screen. It's one of those things that you can "try" it but go into it knowing that it most-likely won't work unless you have a ton of patients. The key is getting all of the glue that bonds the two parts off of the screen/digitizer so the new glass can lay flat and seal.
Interesting. Does the glass not need to be rebonded?