I have huge problem with d3 digitizer,i bought this phone and after 1 month digitizer stopped responding on touch, had no clue what is problem so i bought new digi on egay for 25usd,then i installed it and was the same point i was before,no touch.then i bought main flex cable which connects lcd,digi,fcamera,speaker,sensors and goes thru slide on mainboard.after that digi worked for 3 months.few days back digitizer stopped working again am i eating flex cables or what?
Sent from my DROID2 GLOBAL using XDA
Related
So today my D3 was acting up with the brightness of the Screen and then it would only come on after messing with the screen by sliding it in and out until i came on and i had to leave it in that exact position or it would go black again.
Then my D3 wouldnt come on at all no matter what i did so i took the battery out and held the power button until i heard the boot animation. After awhile i noticed that it started getting very warm or at least i felt it was.
And well now the phone will not make any sounds or movement and no lights come on at all except the charging LED when i plug it in.
unfortunetly the phone is out of warranty and i dont have Insurance so im pretty much screwed which i guess is fine because its rooted and moded with Steel Droid 3.0 and I couldnt download the Stock Rom Zip.
Any ideas?!?
Can anyone help me?!?
Any similar experiences?!?
Could it be the Battery or is it the LCD is fried?!?!?
The only way to fix this is to unlock the bootloader!
I doubt the bootloader has anything to do with it. It sounds like a hardware problem, possibly the ribbon cable for the screen coming loose. If that is the problem you could try taking the phone apart to see if it is loose and disconnect and reconnect it to see if that helps.
Sounds like the flex cable connecting the two halves of the phone has failed. All you need to do is to have it replaced. You can find replacement online - eBay/etc and do it yourself if you are comfortable taking the phone apart. It is not super difficult.
Sent from my Galaxy Nexus using Tapatalk
I agree it sounds like a failed flex. Unfortunately it's a pricy cable, as it has all of the front sensors attached to it. I have seen a few places online that sell them. If anyone finds them cheap, share here, I have a couple D3s with bad flex cables in my bad phone pile.
Best bet is to sell the dead phone, and buy another. People may still pay a few hundred for a non working D3
Sent from my XT862 using Tapatalk
Hey,on ebay is 28usd,i ordered one
Sent from my DROID2 GLOBAL using XDA
hello all,
i live in Pakistan and i bought a motorola milestone a long time, the phone fell off the table and the screen broke so i somehow found a digitizer for the screen and tried changing it very carefully but at the end ribbon attached to the screen got torn apart. I have looked for it all over the country almost but i can't find the ribbon, what to do?
Have you tried eBay?
Some chineses resellers should still have those parts.
They only have paypal support and paypal is not avialable in pakistan
Sent from my Desire HD using xda premium
Hi
I have two Nexus One, of of them with a broken power button.
I already bought two flexes from eBay, but none of them worked in either phone.
Is there a catch or they're just bad?
Can somebody tell me if there's any other trusted place from where I can get a flex?
Sorry for that .. i have two Nexus One phones too and i fix the power button by this video here: http://www.youtube.com/watch?v=KY3us4w9GL8
Thank you fancyfree.
I know how to do it, the only problem is that the two flexes that I got didn't work.
The flex from the phone that's working, works perfectly in both phones, that's why I'm saying that the replacement flexes that I got are faulty.
Hi all,
i searched for the same problem everywhere, but no similar problem found...
My friend broke his digitizer glass in Z1 C6902. No matter where you press, touch was recognized as touch at the crack point. So I decided to replace whole screen with lcd & digitizer. I bought used original set, but it seemed to be cracked too, and touch was not working. I gave it back, and got another in replacement. It's quality was too poor, so i decided to get my money back, and buy new replacement kit (not oryginal). I bought fabric new set, replaced it and... Touch is still not working at all. I thought that it may be software problem, so I rooted the device and installed CM 12. But after successfull rom instalation touch is still not working....
What can I do now?
I checked all the hardware again, everything is plugged corretly, the connetor tapes are all right... Motherboard also should be fine, as the touch was partly responsive with first cracked digitizer. Phone works flawless with PC mouse, but I won't ask my friend to carry mouse with him all the time Please help me, it's a matter of honour right now (I have to fix it!).
Best regards.
Hello, i think you have broken digitizer, so you need to replace with another one. Just one solution for your problem
Sent from my C6903 using XDA Premium 4 mobile app
I purchased an LG G FLEX earlier however unfortunately dropped it few times and one of the times, the screen broke. I am wondering has anyone broke their screen and has it repaired if it possible? If so, where'd be the best place for repair? I am located in bayarea, cali. Thanks.,!