[Q]3G network on MiniCM7 - XPERIA X8 Q&A, Help & Troubleshooting

Hello,
I couldn't find a thread for this issue, so here it goes:
I was successfully able to install nAa kernel + MiniCM7 2.1.9 and all is working excellent, except for the 3g/2g/edge network... Is there something I should install or configure?
Sorry for my english, I'm from Argentina. My provider is Movistar.
Thanks!

demetriolinares said:
Hello,
I couldn't find a thread for this issue, so here it goes:
I was successfully able to install nAa kernel + MiniCM7 2.1.9 and all is working excellent, except for the 3g/2g/edge network... Is there something I should install or configure?
Sorry for my english, I'm from Argentina. My provider is Movistar.
Thanks!
Click to expand...
Click to collapse
Most unusual coincidence! I'm replying you on the same ROM - using the same device. Except I'm on 3G. The issue may be with your provider. Switch to 3G only and let's know the results.

Thanks for the reply!
I've tried GSM/WCDMA, WCDMA only, GSM only, etc... All the same... It doesn't work.
I've also tried the "only 2G" check... Nothing.
Let's hope somebody can help us...

Let me get this straight: Is it a 3G problem? Or is it an outright connectivity problem. "WCDMA only" works just fine for me. A Dalvik cache wipe sometimes is all you need. But let that be your final resort (after a nandroid backup). Cheers.

Saipro said:
Let me get this straight: Is it a 3G problem? Or is it an outright connectivity problem. "WCDMA only" works just fine for me. A Dalvik cache wipe sometimes is all you need. But let that be your final resort (after a nandroid backup). Cheers.
Click to expand...
Click to collapse
Uh, I can use the line for calling or messaging, if that's the question... The problem seems to be with data transfer(?). The navigator keeps saying that there's no connection available, or something like that.

Do you have mobile data enabled?
Do you have the correct APN settings for your provider?

Thanks!!!
AlphaEcho35 said:
Do you have mobile data enabled?
Do you have the correct APN settings for your provider?
Click to expand...
Click to collapse
Thank you, AlphaEcho.
That was just what I needed. I feel I went from n00b to Supern00b.
I searched apn+movistar+argentina and now I'm happy.

Related

Radio 3g not work

hello, I have a problem with my nexus and 'yesterday that no longer works' in 3 g,2g cue only if the radio keeps me active, alpha 19 and I've done everything to resolve, wipe, reset, reinstalled original ROM and then again alpha 19..can you help? thanks
nothing...?
victor.barba said:
hello, I have a problem with my nexus and 'yesterday that no longer works' in 3 g,2g cue only if the radio keeps me active, alpha 19 and I've done everything to resolve, wipe, reset, reinstalled original ROM and then again alpha 19..can you help? thanks
Click to expand...
Click to collapse
with Alpha 19 you have to manually add the APN (device internet) connection settings. if you post your issue in the Alpha 19 thread, someone would have pointed you to the solution.
I put the apn Italians but nothing to do .. but nothing changed sim to do ... wipe reset but nothing to do .. my nexus is no longer 'in 3G, works only in 2g ... possible hardware fault?
I went back to the original ROM but nothing ... tried everything but nothing ... three thousand radios wipe but nothing more .. I do not know 'what to do
victor.barba said:
I put the apn Italians but nothing to do .. but nothing changed sim to do ... wipe reset but nothing to do .. my nexus is no longer 'in 3G, works only in 2g ... possible hardware fault?
I went back to the original ROM but nothing ... tried everything but nothing ... three thousand radios wipe but nothing more .. I do not know 'what to do
Click to expand...
Click to collapse
my other recommendation is to go to Settings->Wireless & networks->Mobile network settings->Network Mode and make sure you do not have GSM only selected. my phone is set to GSM /WCDMA auto.
thanks but I have it set only WCDMA, but nothing, automatic GSM and WCDMA, but nothing.. phone and 'without a net .. with only 2g takes me roaming
in the post under my edebby seems to have the same problem
nobody to help me understand what 'success
try a new sim card...
I tried four sim and all four same problem
no idea....
victor.barba said:
no idea....
Click to expand...
Click to collapse
at this point, i believe it's the phone. contact a local HTC shop and see if they can assist getting it repaired.
but...but I unlock the bootloader

[Q] S i9000 unable to connect to network

Hi, I'm hoping you can help. Total noob so please bear with me.
I got a Si9000, it says it is unlocked.
When putting in sim card I got data network not available error.
Installed S1_Odin_20100512.pit
In PDA option I put in code_i9000XXJVS_CL565837_REV03_USER_LOW_SHIP.tar
For phone option I put in modem_i9000XXJVS_REV_00_CL1059471.tar
For CSC option I put in GT-i9000-CSC-MULTI-OXAJVS.tar
After I was told to type in *2767*3855# to reset phone.
Phone has been updated to 2.3.5, but now getting not able to connect to network error. It says mobile network unavailable. Any Ideas?
Thanks
have you checked that you have the correct settings for the network you want to use and also check that you have a valid IMEI number
slow--welder59 said:
have you checked that you have the correct settings for the network you want to use and also check that you have a valid IMEI number
Click to expand...
Click to collapse
Thanks for replying
Yes, the phone is shows the network, but when you try to select it, it says unable to connect.
I just checked there, and the IMEI number is valid
The files are in the right place, so nothing wrong there. Is wifi working?
snapper.fishes said:
The files are in the right place, so nothing wrong there. Is wifi working?
Click to expand...
Click to collapse
Yep, but wifi is the only thing thats working. No data or mobile network, no GPRS either
Which network are you with and what settings do you have in APN ?
Would recommend ...flashing Rom and Re-Rooting*
I am wondering if it's just something in the connection settings. When I went to Japan last year I had to fiddle with something in the settings before I could pick up signals. It was in mobile networks. I think you can select cdma or something like that.
Sent from my Nexus 4 using Tapatalk 2
EwOkie said:
Which network are you with and what settings do you have in APN ?
Would recommend ...flashing Rom and Re-Rooting*
Click to expand...
Click to collapse
Im with Go Conquer in Ireland, actually brought the phone to a shop to be unlocked, as it was Vodafone, but they said it already was unlocked. They have their settings up on their website so I have entered them.
I'm going to try putting it back to its original settings again, and rooting it again, do you think that might be it? Ill also try the cdma settings.
Thanks to you both
Follow my Guide below to flash Rom and then Root it
Why did you go to a shop to unlocked it ...theres apps on here free??
Did you manage to get it right again? I'm having the same issue as you do. I did a factory reset with cwm and now when I enter the sim card it doesnt connect to network or 3g. Wifi does work. I am on original rom 2.3.5 and I dont know what to do. I tried a other sim and that didnt work either. Please advice. Thank you.
happybeat said:
Did you manage to get it right again? I'm having the same issue as you do. I did a factory reset with cwm and now when I enter the sim card it doesnt connect to network or 3g. Wifi does work. I am on original rom 2.3.5 and I dont know what to do. I tried a other sim and that didnt work either. Please advice. Thank you.
Click to expand...
Click to collapse
Try to flash in odin without sim and put it later when it boots
Sent from my GT-I9000 using XDA Premium 4 mobile app
happybeat said:
Did you manage to get it right again? I'm having the same issue as you do. I did a factory reset with cwm and now when I enter the sim card it doesnt connect to network or 3g. Wifi does work. I am on original rom 2.3.5 and I dont know what to do. I tried a other sim and that didnt work either. Please advice. Thank you.
Click to expand...
Click to collapse
Are you sure to have flashed ROM with proper CSC bandwidth for the region where you live?
Hi,
Thank you all for replying! For some unknown reason the phone works. I left it a day off and then I powered it up again and it worked. So I dont know how but thank you guys for replying!
Grtz,
Happybeat

[Q] Failed to enable data connection

My XT862 stock version is Verizon 5.7.906, and everything works well except wifi(it always show an error and can not lunch, even if I reset to factory settings or flash sbf)
And in SafeStrap 3.05, I installed CM10.1-2013-03-23 version in slot 1. the wifi works well but I can not turn on data connection. I am using a WCDMA network. In *#*#4636#*#*, I can find it works on UMTS mode, but no data connection. I tried to enable data connection via correct the checkbox in setting and in the *#*#4636#*#* menu, but both failed.
How can I deal with it?
Sounds like you forgot the GSM mods to the build.prop. Are you using the 862 or 883 radio?
MrObvious said:
Sounds like you forgot the GSM mods to the build.prop. Are you using the 862 or 883 radio?
Click to expand...
Click to collapse
I am using XT862 radio, N_03.18.32P.
This problem appeared about a week ago, when I am using the 2013-03-17 build, and it continued when I upgrade to 2013-03-23 build.
There's a line that you could try uncommenting in the build.prop like ro.ril = 284000 or something and one below it. Or you might have to add that. See if that helps. (Or you could try an 883 build.prop).
MrObvious said:
There's a line that you could try uncommenting in the build.prop like ro.ril = 284000 or something and one below it. Or you might have to add that. See if that helps. (Or you could try an 883 build.prop).
Click to expand...
Click to collapse
I tried what you say on stock rom radio and the baseband become unknown. And I tried to change my baseband to n_34.18.16s, the system can find baseband and call or send SMS, but still no data connection.
lzy0702 said:
I tried what you say on stock rom radio and the baseband become unknown. And I tried to change my baseband to n_34.18.16s, the system can find baseband and call or send SMS, but still no data connection.
Click to expand...
Click to collapse
That's progress. Check your APN settings.
MrObvious said:
That's progress. Check your APN settings.
Click to expand...
Click to collapse
My APN settings are all correct, but it still does not works.
This APN settings work on the stock ROM but not on CM10.1.
It must be something wrong.....
MrObvious said:
That's progress. Check your APN settings.
Click to expand...
Click to collapse
After I reset the APN settings, the icon of data link appears and then disappears about 10 seconds later.
Ugh weird. I'm running out of ideas.
I have the same issue
lzy0702 said:
My XT862 stock version is Verizon 5.7.906, and everything works well except wifi(it always show an error and can not lunch, even if I reset to factory settings or flash sbf)
And in SafeStrap 3.05, I installed CM10.1-2013-03-23 version in slot 1. the wifi works well but I can not turn on data connection. I am using a WCDMA network. In *#*#4636#*#*, I can find it works on UMTS mode, but no data connection. I tried to enable data connection via correct the checkbox in setting and in the *#*#4636#*#* menu, but both failed.
How can I deal with it?
Click to expand...
Click to collapse
I live in China ,so my xt862 works on China Mobile,phone call and SMS works well,but cannot connect the data network.wifi is good My xt862's information :system version:5.7.906.xt862.verizon.en.us, model:droid3, android version: 2.3。4,baseband:N-03.18.32p,kernel:2.63537.g5fa4155,* *build number: 535.1._84_d3g-66_m2-10
I think the APN is correct,and I try to flash the xt883's radio,the same situation.I want to use the edge or gprs,it is important to me. No matter what I do,there is no symbol of mobile date network...
hardware or software?
MrObvious said:
Ugh weird. I'm running out of ideas.
Click to expand...
Click to collapse
I doubt if the hardware cause this issues?But calls and SMS is good.......Anybody can help us ?
As has been mentioned numerous times in the cm10.1 thread, builds after 3/11 do not have working data.
Sent from my XT860 using xda premium
Endoroid said:
As has been mentioned numerous times in the cm10.1 thread, builds after 3/11 do not have working data.
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
Oh. There's your answer. hehe.
but my D3's version is not CM10.1
MrObvious said:
Oh. There's your answer. hehe.
Click to expand...
Click to collapse
my system version is 5.7.906.verizon.en,.us, kernel ver. 2.6.35.7-g5f74155.. baseband :n_34.18.16s. Could you give me a hand?

Mobile Data

Hello,
A friend of mine has the RAZR i and suddenly on one day his mobile data didn't work anymore for an unknown reason. Wie tried almost everything that came into my mind (reboot, take out SIM, check all the settings...).
The problem is, he doesn't want to factory reset (of course) cause he has many important data.
The phone is on stock ROM, not rooted.
Thanks in advance.
I think only ways is to root phone and edit file with apn settings.
Chamelleon said:
I think only ways is to root phone and edit file with apn settings.
Click to expand...
Click to collapse
Hm.. That's actually bad :/
Is there any possibility to find out what has caused that problem? I'm quite proficient with phones actually (rooted, unlocked bootloader and custom ROM) respectively I have experience in phone related things.
Any other ideas or help?
Do you know, if your friend has Vodafone? Mobile Data with Vodafone doesn´t work in whole Germany at the Moment.
mario93 said:
Do you know, if your friend has Vodafone? Mobile Data with Vodafone doesn´t work in whole Germany at the Moment.
Click to expand...
Click to collapse
Yes, he has! Thank you! That's it
mario93 said:
Do you know, if your friend has Vodafone? Mobile Data with Vodafone doesn´t work in whole Germany at the Moment.
Click to expand...
Click to collapse
I have also Vodafone but had no Mobile Data Problems today. I am from Germany.
But i use only GPRS + EDGE... maybee its only UMTS with Problems? Try switching to 2G.
One time i have had the same problem. My Mobile Data was broken for nothing.
I couldn´t fix it and after a few hours and some reboots it was working again.
Think that was also a problem by Vodafone...

3G reception problem with mi3w

I am a proud owner of a mi3w and for the last 3 months I have no 3G reception. My phone works flawlessly if I change to 2G only, but when I switch to 3G only I lose reception completely. The problem started a little while after updating to the MIUI 7.0.5.0 stable international. Can it be a harware or a software problem?
I already tried reflashing ROM (through the selection of "return to factory settings"), clearing cache, updating to 7.1.1.0 and my sim works in a different phone receiving 3G and 4G. Any help would be highly appreciated.
Have you tried to search network manually?
Me_Ashish_ said:
Have you tried to search network manually?
Click to expand...
Click to collapse
Yes I tried both 3G preferred and only 3G. Moreover I tried to connect ot the 3G network but the problem remains. Can it be a hardware problem since the antenna works with 2G?
Plak4ever said:
I am a proud owner of a mi3w and for the last 3 months I have no 3G reception. My phone works flawlessly if I change to 2G only, but when I switch to 3G only I lose reception completely. The problem started a little while after updating to the MIUI 7.0.5.0 stable international. Can it be a harware or a software problem?
I already tried reflashing ROM (through the selection of "return to factory settings"), clearing cache, updating to 7.1.1.0 and my sim works in a different phone receiving 3G and 4G. Any help would be highly appreciated.
Click to expand...
Click to collapse
Dial *#*#4636#*#* and force wcdma
#MADHAN said:
Dial *#*#4636#*#* and force wcdma
Click to expand...
Click to collapse
Done that same effect....
try a fastboot flash of the modem
Me_Ashish_ said:
Have you tried to search network manually?
Click to expand...
Click to collapse
Lacedaemonius said:
try a fastboot flash of the modem
Click to expand...
Click to collapse
I reflashed with the misflash tool, wiping all data and system, using the latest ROM. Nothing changed.....
How do I flash only the modem?
Plak4ever said:
I reflashed with the misflash tool, wiping all data and system, using the latest ROM. Nothing changed.....
How do I flash only the modem?
Click to expand...
Click to collapse
IDK. Also I don't know if Baseband has to do something with reception. If it does, you should flash MIUI MM. It updates Baseband version from 3 to 4.
use "fastboot flash modem" and then filename.ext
http://forum.xda-developers.com/xiaomi-mi-3/general/guide-flashing-fastboot-miui-roms-t2938279
Hello. Were you able to resolve the issue.?

Categories

Resources