Database Develop

Looking for help My milestone keep rebooting

I am a Three user in Australia and enjoyed my milestone very much
but everytime when I connected with 3G network the phone reboot
It just runs well with 2G and edge network but can see inevitable reboot everytime when i connect with 3G
Would it be caused by the baseband or Firmware?
I m currently using 3GSMEPU91A_U_91.07.56I
and build number SHOLS_U2_02.36.0
I have tried to wipe everything and flash into another rom but the problem still exist...
I have even sent to the service centre and they could not found any problem
Can anyone here could help me?

kitmochi said:
I am a Three user in Australia and enjoyed my milestone very much
but everytime when I connected with 3G network the phone reboot
It just runs well with 2G and edge network but can see inevitable reboot everytime when i connect with 3G
Would it be caused by the baseband or Firmware?
I m currently using 3GSMEPU91A_U_91.07.56I
and build number SHOLS_U2_02.36.0
I have tried to wipe everything and flash into another rom but the problem still exist...
I have even sent to the service centre and they could not found any problem
Can anyone here could help me?
Click to expand...
Click to collapse
1.what rom did you flashed into?
2.did you try flashing other sbf file?

[Q]3G network on MiniCM7

Hello,
I couldn't find a thread for this issue, so here it goes:
I was successfully able to install nAa kernel + MiniCM7 2.1.9 and all is working excellent, except for the 3g/2g/edge network... Is there something I should install or configure?
Sorry for my english, I'm from Argentina. My provider is Movistar.
Thanks!

demetriolinares said:
Hello,
I couldn't find a thread for this issue, so here it goes:
I was successfully able to install nAa kernel + MiniCM7 2.1.9 and all is working excellent, except for the 3g/2g/edge network... Is there something I should install or configure?
Sorry for my english, I'm from Argentina. My provider is Movistar.
Thanks!
Click to expand...
Click to collapse
Most unusual coincidence! I'm replying you on the same ROM - using the same device. Except I'm on 3G. The issue may be with your provider. Switch to 3G only and let's know the results.

Thanks for the reply!
I've tried GSM/WCDMA, WCDMA only, GSM only, etc... All the same... It doesn't work.
I've also tried the "only 2G" check... Nothing.
Let's hope somebody can help us...

Let me get this straight: Is it a 3G problem? Or is it an outright connectivity problem. "WCDMA only" works just fine for me. A Dalvik cache wipe sometimes is all you need. But let that be your final resort (after a nandroid backup). Cheers.

Saipro said:
Let me get this straight: Is it a 3G problem? Or is it an outright connectivity problem. "WCDMA only" works just fine for me. A Dalvik cache wipe sometimes is all you need. But let that be your final resort (after a nandroid backup). Cheers.
Click to expand...
Click to collapse
Uh, I can use the line for calling or messaging, if that's the question... The problem seems to be with data transfer(?). The navigator keeps saying that there's no connection available, or something like that.

Do you have mobile data enabled?
Do you have the correct APN settings for your provider?

Thanks!!!
AlphaEcho35 said:
Do you have mobile data enabled?
Do you have the correct APN settings for your provider?
Click to expand...
Click to collapse
Thank you, AlphaEcho.
That was just what I needed. I feel I went from n00b to Supern00b.
I searched apn+movistar+argentina and now I'm happy.

[Q] Data network not available? help would be much appreciated

Can someone help me.. i was resetting my wife's i9000 Galaxy S as it was running slow. And since its booted up i doesn't pick up the network anymore.. and when trying to call out it says "data network not availible".... driving me insane!
It shows the Tmobile logo on startup, but it has always been used with o2 or Tesco (so i assumed its unlocked) I have done the factory reset and even previously updated it using kies. Now Kies wont update either! bit stuck at the mo..

jonnyfartpant5 said:
Can someone help me.. i was resetting my wife's i9000 Galaxy S as it was running slow. And since its booted up i doesn't pick up the network anymore.. and when trying to call out it says "data network not availible".... driving me insane!
It shows the Tmobile logo on startup, but it has always been used with o2 or Tesco (so i assumed its unlocked) I have done the factory reset and even previously updated it using kies. Now Kies wont update either! bit stuck at the mo..
Click to expand...
Click to collapse
Check Here to chose your forum/Guide by Version of your phone or you will have more problems by using wrong solutions due to different versions of Galaxy S
try menu>setting>wireless and Networks> Mobile networks, to select your network

jonnyfartpant5 said:
Can someone help me.. i was resetting my wife's i9000 Galaxy S as it was running slow. And since its booted up i doesn't pick up the network anymore.. and when trying to call out it says "data network not availible".... driving me insane!
It shows the Tmobile logo on startup, but it has always been used with o2 or Tesco (so i assumed its unlocked) I have done the factory reset and even previously updated it using kies. Now Kies wont update either! bit stuck at the mo..
Click to expand...
Click to collapse
Ok, since posting i have managed to Update the fiirmware to 2.3.3 gingerbread using odin. But am still unable to use it on o2/Tesco mobile or even on Tmobile now! Emergency calls only, and gives the error (mobile network not available). I might be wrong, but i suspect something like the firmware for the modem or something?..

jonnyfartpant5 said:
Ok, since posting i have managed to Update the fiirmware to 2.3.3 gingerbread using odin. But am still unable to use it on o2/Tesco mobile or even on Tmobile now! Emergency calls only, and gives the error (mobile network not available). I might be wrong, but i suspect something like the firmware for the modem or something?..
Click to expand...
Click to collapse
try setting the APN manually or changing modem

slipknot31 said:
try setting the APN manually or changing modem
Click to expand...
Click to collapse
i done the APN and no change.. i tried to flash the modem.. pretty sure it changed.. but how am i to know exactly what modem to be using? im from uk and i need it on o2/tesco mobile and its running 2.3.5 gingerbread at mo.. cheers

in Phone app dial *#06# and see if your imei is intact .. if it's gone then you have to flash a GB rom, root it again and return to CM10 . Use this guide if your imei is gone : [Guide]Upgrade SGS I9000 to 2.3.6 (Value Pack) & Root It

idCyber said:
in Phone app dial *#06# and see if your imei is intact .. if it's gone then you have to flash a GB rom, root it again and return to CM10 . Use this guide if your imei is gone : [Guide]Upgrade SGS I9000 to 2.3.6 (Value Pack) & Root It
Click to expand...
Click to collapse
hi i tried this tutorial, everything went smoothly, but still getting the same error. anything else i can try?

jonnyfartpant5 said:
hi i tried this tutorial, everything went smoothly, but still getting the same error. anything else i can try?
Click to expand...
Click to collapse
you can try manually set gsm band to 900mhz

McDown said:
you can try manually set gsm band to 900mhz
Click to expand...
Click to collapse
in network mode? to "gsm only" if so ... it didnt work

jonnyfartpant5 said:
in network mode? to "gsm only" if so ... it didnt work
Click to expand...
Click to collapse
no. in service mode.
dial *#2263# and choose gsm 900

McDown said:
no. in service mode.
dial *#2263# and choose gsm 900
Click to expand...
Click to collapse
still no luck

dial *#0011# to see if gsm 900 is active

McDown said:
dial *#0011# to see if gsm 900 is active
Click to expand...
Click to collapse
Ok I think I've worked out where the problem lies. Think it is a bad efs/imei as its displaying wrong after entering *#06# etc.. "004999010630000" grrr. So now need to work out how to get this back

I8190N Data bug

Hi all,
I am currently on stock 4.1.2 JB build of this years January.
Whenever I start my phone, the internet/data connectivity is a G, so GSM rather than H/3G. That is, until I search for networks and set it to my carrier (being 3 IRL) BUT the thing is it is actually already on 3 IRL, so it definitely isn't roaming. Why does this happen? Do I have to live with it? It never occured with a previous stock build, or Maclaws CM10.2. It's not major, it just gets really annoying. Cheers!

Aneuryst said:
Hi all,
I am currently on stock 4.1.2 JB build of this years January.
Whenever I start my phone, the internet/data connectivity is a G, so GSM rather than H/3G. That is, until I search for networks and set it to my carrier (being 3 IRL) BUT the thing is it is actually already on 3 IRL, so it definitely isn't roaming. Why does this happen? Do I have to live with it? It never occured with a previous stock build, or Maclaws CM10.2. It's not major, it just gets really annoying. Cheers!
Click to expand...
Click to collapse
Make sure Network mode is set to Auto mode or WCDMA in Settings -> More settings -> Mobile networks -> Network mode.

ImproAptoVictum said:
Make sure Network mode is set to Auto mode or WCDMA in Settings -> More settings -> Mobile networks -> Network mode.
Click to expand...
Click to collapse
It is.

Aneuryst said:
It is.
Click to expand...
Click to collapse
GSM seems to be prefered when Mobile data is off. Unless it doesnt swtich to 3G/H while using Mobile data (e.g. browsing the internet) there shouldnt be any problem.

ImproAptoVictum said:
GSM seems to be prefered when Mobile data is off. Unless it doesnt swtich to 3G/H while using Mobile data (e.g. browsing the internet) there shouldnt be any problem.
Click to expand...
Click to collapse
No, see, I permanently have my mobile data on. I have my phone off over night. When I turn it on, it is always on GSM no matter what, until I manually search networks and switch it back to 3G/H (by selecting my network)
So theoretically, GSM isn't preferred because I have 3-4 bars of 3G/H.

Aneuryst said:
No, see, I permanently have my mobile data on. I have my phone off over night. When I turn it on, it is always on GSM no matter what, until I manually search networks and switch it back to 3G/H (by selecting my network)
So theoretically, GSM isn't preferred because I have 3-4 bars of 3G/H.
Click to expand...
Click to collapse
What is your phones current baseband version, kernel version and build number?

ImproAptoVictum said:
What is your phones current baseband version, kernel version and build number?
Click to expand...
Click to collapse
Baseband version- XXAMI1
Kernel version- 3.0.31
Build number- JZO54K.I8190NXXAMJ2

Aneuryst said:
Baseband version- XXAMI1
Kernel version- 3.0.31
Build number- JZO54K.I8190NXXAMJ2
Click to expand...
Click to collapse
You might try to flash baseband from Ireland (Three) instead of the one (i assume) you are using at the moment, as it is specifically for Three.

ImproAptoVictum said:
You might try to flash baseband from Ireland (Three) instead of the one (i assume) you are using at the moment, as it is specifically for Three.
Click to expand...
Click to collapse
Alright, downloading that one now. I used that one before but had a bug where my SMS would disappear...
It's just, yes I am using that one right now, but I flashed a Three specific modem.

Aneuryst said:
Alright, downloading that one now. I used that one before but had a bug where my SMS would disappear...
It's just, yes I am using that one right now, but I flashed a Three specific modem.
Click to expand...
Click to collapse
I fully flashed (updated to) the newest firmware (ANB1) for I8190N myself without any issues with mobile network or what so ever, even it being VNZ (New Zealand Vodafone) region despite my phones initial Nordic region.

ImproAptoVictum said:
I fully flashed (updated to) the newest firmware (ANB1) for I8190N myself without any issues with mobile network or what so ever, even it being VNZ (New Zealand Vodafone) region despite my phones initial Nordic region.
Click to expand...
Click to collapse
Well, I also read that all XX firmwares work in any part of Europe regardless. I'm going to try to flash the latest AMJ2 modem now and see.

Aneuryst said:
Well, I also read that all XX firmwares work in any part of Europe regardless. I'm going to try to flash the latest AMJ2 modem now and see.
Click to expand...
Click to collapse
Yes, XX is 'international' and should work with all regions apart from Asia (ZS).

ImproAptoVictum said:
Yes, XX is 'international' and should work with all regions apart from Asia (ZS).
Click to expand...
Click to collapse
Well I just flashed the modem and the problem is still there.
If I flash that firmware with Odin, do I need to wipe data? Or can you update stock roms with a dirty flash too?

Aneuryst said:
Well I just flashed the modem and the problem is still there.
If I flash that firmware with Odin, do I need to wipe data? Or can you update stock roms with a dirty flash too?
Click to expand...
Click to collapse
Flashing it on top of stock rom with Odin would be like updating (normally no user data/apps lost), but you would however lose root and potentially custom recovery (post reboot after flash). Taking a nandroid backup prior this is advised, as always.

ImproAptoVictum said:
Flashing it on top of stock rom with Odin would be like updating (normally no user data/apps lost), but you would however lose root and potentially custom recovery (post reboot after flash). Taking a nandroid backup prior this is advised, as always.
Click to expand...
Click to collapse
Well, I have no problem rerooting and reflashing CWM as it only takes 5 minutes anyway.
I'll post the results once it's downloaded and flashed

ImproAptoVictum said:
Flashing it on top of stock rom with Odin would be like updating (normally no user data/apps lost), but you would however lose root and potentially custom recovery (post reboot after flash). Taking a nandroid backup prior this is advised, as always.
Click to expand...
Click to collapse
Alright, now it's roaming every time I reboot.. until I manually switch to 3G.

Aneuryst said:
Alright, now it's roaming every time I reboot.. until I manually switch to 3G.
Click to expand...
Click to collapse
National roaming, that is?

ImproAptoVictum said:
National roaming, that is?
Click to expand...
Click to collapse
Yes, my roaming carrier is Vodafone IE, so on boot it's always set to that instead of 3 IRL. I have it on auto mode, but theoretically WCDMA should be preferred since I have 4 bars of H right now.

Aneuryst said:
Yes, my roaming carrier is Vodafone IE, so on boot it's always set to that instead of 3 IRL. I have it on auto mode, but theoretically WCDMA should be preferred since I have 4 bars of H right now.
Click to expand...
Click to collapse
Tried choosing 3 IRL (as prefered) insted of having it select automatically in Settings -> More settings -> Mobile networks -> Network operators (-> Search networks)?

ImproAptoVictum said:
Tried choosing 3 IRL (as prefered) insted of having it select automatically in Settings -> More settings -> Mobile networks -> Network operators (-> Search networks)?
Click to expand...
Click to collapse
That's what I always have to do.

HTC ONE HTL22 Radio Problem

I have a HTC J ONE HTL22 and a few days ago I lost my network signal completely. Contacted my network provider everything was good,bought a new sim tried that and still no network. The day I lost it I went into the service menu #*#*4636*#*# and into Phone Information and was just trying some different network settings. I clicked select radio band...and I saw Euro Band,Japan Band,US Band ,AUS Band ,AUS2 Band. I tried US Band to see the result and than i lost that menu ,now I only see Automatic, Cellular(800-MHz Band) and PCS(1900-MHz Band). When I try Automatic it says Unsuccessful. The other 2 successfully work but don't give me my network back? I've done a factory reset and still nothing changes. When I manually search for a network,it comes up blank. before it showed Bell,Telus,Rogers etc. So it's defiantly something with my radio.
My cell is UNLOCKED, S-OFF, CID-11111111, HBOOT-1.54.0000, RADIO-1.23.11.0829 and CWM installed,running stock 4.2.2. So I'm wondering is there a way to reset my radio or any help on flashing a new radio? Thanks

WarSupport said:
I have a HTC J ONE HTL22 and a few days ago I lost my network signal completely. Contacted my network provider everything was good,bought a new sim tried that and still no network. The day I lost it I went into the service menu #*#*4636*#*# and into Phone Information and was just trying some different network settings. I clicked select radio band...and I saw Euro Band,Japan Band,US Band ,AUS Band ,AUS2 Band. I tried US Band to see the result and than i lost that menu ,now I only see Automatic, Cellular(800-MHz Band) and PCS(1900-MHz Band). When I try Automatic it says Unsuccessful. The other 2 successfully work but don't give me my network back? I've done a factory reset and still nothing changes. When I manually search for a network,it comes up blank. before it showed Bell,Telus,Rogers etc. So it's defiantly something with my radio.
My cell is UNLOCKED, S-OFF, CID-11111111, HBOOT-1.54.0000, RADIO-1.23.11.0829 and CWM installed,running stock 4.2.2. So I'm wondering is there a way to reset my radio or any help on flashing a new radio? Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=51047999&highlight=htc+j+one+htl22#post51047999

clsA said:
http://forum.xda-developers.com/showthread.php?p=51047999&highlight=htc+j+one+htl22#post51047999
Click to expand...
Click to collapse
Thanks for the link. Today I tried to install a new radio through CWM. I pick the zip to install and after a few seconds it says complete...I reboot and my radio never changes. I've tried it through CWM and Rom manager. Am I doing something wrong?

WarSupport said:
I have a HTC J ONE HTL22 and a few days ago I lost my network signal completely. Contacted my network provider everything was good,bought a new sim tried that and still no network. The day I lost it I went into the service menu #*#*4636*#*# and into Phone Information and was just trying some different network settings. I clicked select radio band...and I saw Euro Band,Japan Band,US Band ,AUS Band ,AUS2 Band. I tried US Band to see the result and than i lost that menu ,now I only see Automatic, Cellular(800-MHz Band) and PCS(1900-MHz Band). When I try Automatic it says Unsuccessful. The other 2 successfully work but don't give me my network back? I've done a factory reset and still nothing changes. When I manually search for a network,it comes up blank. before it showed Bell,Telus,Rogers etc. So it's defiantly something with my radio.
My cell is UNLOCKED, S-OFF, CID-11111111, HBOOT-1.54.0000, RADIO-1.23.11.0829 and CWM installed,running stock 4.2.2. So I'm wondering is there a way to reset my radio or any help on flashing a new radio? Thanks
Click to expand...
Click to collapse
Anyone know of a way to get my Radio Bands back? or any other service number codes to possibly reset the Radio. Thanks

WarSupport said:
Anyone know of a way to get my Radio Bands back? or any other service number codes to possibly reset the Radio. Thanks
Click to expand...
Click to collapse
the same problem
anybody know how to fix it?

Possibly...
WarSupport said:
Anyone know of a way to get my Radio Bands back? or any other service number codes to possibly reset the Radio. Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2550929
This might be of a bit more value. It seems the prior link was for a different HTC One model. Above link is for M7. Check it out if you still need a radio/baseband.
I also realized your phone is a Japanese variant...I dont know if that makes a difference or not in compatibility, but I wanted to mention you could try using ADB to flash the radio/baseband instead of using recovery. I think you could also upgrade your firmware,which usually includes the baseband. Good luck...

Thanks for reply
Nothing help
flash radio through fasboot and TWRP does not matter

Same here...still no luck yet. Still have no network. Makes no sense why the radio bands cant be restored!?

many service centers, many ROMs nothing help