need help - Motorola Droid and Milestone Q&A, Help & Troublesh

I need help loading the sense 2.2 rom on my Droid. When I tryed to do it it doesn't work it aborts the installation

jtk15 said:
I need help loading the sense 2.2 rom on my Droid. When I tryed to do it it doesn't work it aborts the installation
Click to expand...
Click to collapse
What's steps have you done to flash the rom?
Sent from my NookColor using xda premium

Related

SGS II Boot Animation Zip Plus SGS II Binerys

Im Am not Responsible For Anything That Happens To Your Phone, Only Tested On Gingerbread So Its At Your Own Risk...
Sgs II Boot Animation Zip Taken From KE7
Plus SGS II Binerys Like Fugu Tweaks
Put Boot Animation zip In System/Media
Binerys Cwm Flashable
what is fugutweaks?
what is that for?
what rom can flash this?
kazumahits said:
what is fugutweaks?
what is that for?
what rom can flash this?
Click to expand...
Click to collapse
Make a backup of your rom and test it out on some 2.2 builds...help contribute and stop asking questions
bobbbb said:
Make a backup of your rom and test it out on some 2.2 builds...help contribute and stop asking questions
Click to expand...
Click to collapse
Geez! It was a simple question.
Works great on cm7 Thx!
Sent from my SGH-T959 using XDA App
kazumahits said:
what is fugutweaks?
what is that for?
what rom can flash this?
Click to expand...
Click to collapse
Its gingerbread binerys to help app process... Making it smoother on roms, any rom
Sent from my GT-I9000 using XDA App
For some reason, it wouldn't let me install the boot animation. It just hangs at installing update. Tried to install it on biwinning 2.2.1
Dattack said:
For some reason, it wouldn't let me install the boot animation. It just hangs at installing update. Tried to install it on biwinning 2.2.1
Click to expand...
Click to collapse
OP never said it was CWM flashable?
You have to push it using Root Explorer.
Dattack said:
For some reason, it wouldn't let me install the boot animation. It just hangs at installing update. Tried to install it on biwinning 2.2.1
Click to expand...
Click to collapse
I think it might Only be for gingerbread Im sorry if i didnt make it clear but I dunno, the thing is you must put it in media folder test it again it might work for 2.2.1... I only tested gingerbread
Sent from my GT-I9000 using XDA App
No it works on 2.2 had it running on V......u have to push it not flash it.....its just the boot animation that says samsung galaxy s II on it with the flashing s.
Project-V 6-5-11
Shortbus-Driver said:
No it works on 2.2 had it running on V......u have to push it not flash it.....its just the boot animation that says samsung galaxy s II on it with the flashing s.
Project-V 6-5-11
Click to expand...
Click to collapse
Yeah your right I didnt make it flashable but I meant I dont know if it would be compatible with any rom that not gingerbread, I only tested with gingerbread
Sent from my GT-I9000 using XDA App
what do the sgs binarys do?
lightninbug said:
what do the sgs binarys do?
Click to expand...
Click to collapse
Makes phone smoother updated app process
Sent from my GT-I9000 using XDA App
Binaries work on Bi-Winning 3?

tablet won't start after installing custom rom

Hi, I have a rooted galaxy tab. I recently just installed a custom rom and after, it doesn't boot anymore? It only stucks at the boot screen. May I know what's the issue here? Is it a brick or something? Any helps appreciated. Tks!
it sounds like a soft brick, which isn't too bad at all Just switch your tab over to Download Mode and then flash another ROM that is confirmed working on your device.
A hard brick would be if your tab didn't power on in any way at all no matter what, and that would be pretty bad :/
Hi, tks for ur reply! Do u mind telling me where to download those roms? Tks once again!
Sent from my HTC Legend using XDA App
bryanqjx said:
Hi, tks for ur reply! Do u mind telling me where to download those roms? Tks once again!
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
espionage724 said:
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
Click to expand...
Click to collapse
Yah, mine is the galaxy tab 7 P1000 as well. But mine is not from the US. It's from Singapore.
Sent from my HTC Legend using XDA App
And I wanna gingerbread rom.
Sent from my HTC Legend using XDA App
espionage724 said:
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
Click to expand...
Click to collapse
Hi! I managed to get my rom on samfirmware.com and even flashed it via odin. But one thing, it managed to go the boot screen but then it doesn't move at the "samsung" glowing screen after that. Did I do anything wrong?
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
priyana said:
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
K. I also came across this roto JME pre-rooted firmware v4. Will this work as well?
Sent from my HTC Legend using XDA App
You need dbdata.rfs
bryanqjx said:
Hi! I managed to get my rom on samfirmware.com and even flashed it via odin. But one thing, it managed to go the boot screen but then it doesn't move at the "samsung" glowing screen after that. Did I do anything wrong?
Click to expand...
Click to collapse
You may have a corrupted /dbdata. If that's true, no matter how many new ROMs or firmwares you install, it won't help you.
This should take care of your problem:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121
yappoe said:
You may have a corrupted /dbdata. If that's true, no matter how many new ROMs or firmwares you install, it won't help you.
This should take care of your problem:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121
Click to expand...
Click to collapse
I tried using the dbdata before. But it still doesn't work.
Sent from my HTC Legend using XDA
I have the same problem before when i was flsshing back to the original rom. But i set my tab to download mode and flash it into a new rom then everything is settle. Btw, am using OC 4.1.0 rom running on 2.3.6! Try it.
Sent from my GT-P1000 using xda premium
priyana said:
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Hi! Tks for your advice. I just read through the restocking steps on the teamovercome.net. But I've got a question. Is it compulsory to actually install the overcome kernel and rom?
Izachii said:
I have the same problem before when i was flsshing back to the original rom. But i set my tab to download mode and flash it into a new rom then everything is settle. Btw, am using OC 4.1.0 rom running on 2.3.6! Try it.
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
Did you flash the overcome rom?
bryanqjx said:
Hi! Tks for your advice. I just read through the restocking steps on the teamovercome.net. But I've got a question. Is it compulsory to actually install the overcome kernel and rom?
Click to expand...
Click to collapse
I installed overcome kernel with many other rom before moving to redpill (because of bluetooth keyboard compatibility). It works great with most of rom 2.3.3 and 2.3.6 base. Don't hesitate to try the kernel with other rom.
Btw, did you try pushing new pit file through odin?
yappoe said:
I installed overcome kernel with many other rom before moving to redpill (because of bluetooth keyboard compatibility). It works great with most of rom 2.3.3 and 2.3.6 base. Don't hesitate to try the kernel with other rom.
Btw, did you try pushing new pit file through odin?
Click to expand...
Click to collapse
I haven't tried this process yet cause I am curious whether if its necessary to flash the kernel and the rom. But since its good, I will try it later! Tks btw.
Sent from my HTC Legend using XDA

[Q] Cant install custom ROMs, getting error status 7

hi
i get the following error when i try to install custom roms.
I am running a stock DDKQ8 rooted with CWM 4.0.0.9.
i have installed stocklite 6.0 from CWM and it works.
when i tried Cyanogen 7.1 based miracle 4 or the official cyanogen 7.1 nightly, i got this error.
image here: imgur.com/o0bF9
have followed all instructions. please advise.
let me know if you ned anymore info. im posting here because i cant post in the dev section yet.
please help. i reaaly would like to try out these roms.
Cwm5
Sent from my GT-S5830 using xda premium
Install CWM5 as most ROMs which are being developed nowadays do not work properly when flashed via CWM4. Here is a thread, you can get the download link for CWM5 here
http://forum.xda-developers.com/showthread.php?t=1552695
yaa, you can use CMW5. no worries at all.
-try to reinstall
-or redownload the files
Sent from my GT-S5830 using xda premium
LOL
Subo_it said:
yaa, you can use CMW5. no worries at all.
Click to expand...
Click to collapse
However you got a thank by me by a mistake

Stuck on logo screen

Ok I need some serious help I downloaded a rom for the lg optimus 3D and didn't work so I went back to restore it to the stock rom. Afterwards it boots and sits at the lg screen I did all the proper procedures and mounting sd on cwm doesn't work so can anyone help.
Give more info like the ROM you tried what you were using before the ROM (like android version 2.2.2, 2.35, or 4.0.4)
Sent from my LG-P925 using xda premium
wayno140 said:
Give more info like the ROM you tried what you were using before the ROM (like android version 2.2.2, 2.35, or 4.0.4)
Sent from my LG-P925 using xda premium[/QUOO\
Ok it was andriod 2.2.2 stock rom to a rom for optimus 3d cm10 nightly for p920.
Click to expand...
Click to collapse
OK you need to upgrade to gingerbread and there is a whole thread about cm10
Sent from my LG-P925 using xda premium
Try following the instructions listed here.
http://forum.xda-developers.com/showthread.php?t=1942836
new problem
95civicsi said:
Try following the instructions listed here.
http://forum.xda-developers.com/showthread.php?t=1942836
Click to expand...
Click to collapse
Now I have a new problem I was able to install a new rom cm 7.2 for p925 which doesn't mount internal storage which is preventing me from downgrading to stock Tom please help.
See if you can get this rom to install following the instructions provided in the thread.
http://forum.xda-developers.com/showthread.php?t=1956347
link doesnt work ok i got pass the lg symbol issue but my real issue is the baseband version and when i follow the guide on how to upgrade to ics port my computer wont reconize it when in download mode.
go to download mode and flash the stock rom that can be obtained from the resurrection guide for p920 and su760
Sent from my LG-SU760 using xda premium
iamtalha said:
go to download mode and flash the stock rom that can be obtained from the resurrection guide for p920 and su760
Sent from my LG-SU760 using xda premium
Click to expand...
Click to collapse
Thanks back stock. But can you tell me how to root stock gingerbread also please don't link me to post on this forum I already tried its way the software version is v20p.
try "super one click root" software
Sent from my GT-I9100 using xda premium

[Q] Installing JellyMod

I apologies If I'm posting in the wrong section, I literally just signed up. I've rooted my device and have got the jellymod file downloaded, however I've looked at some tutorials (couldn't find one specifically for I9070) and they say to use ROM manager with clockwork mod however it seems my model isn't supported so I'm quite stuck, help please!
Azykk said:
I apologies If I'm posting in the wrong section, I literally just signed up. I've rooted my device and have got the jellymod file downloaded, however I've looked at some tutorials (couldn't find one specifically for I9070) and they say to use ROM manager with clockwork mod however it seems my model isn't supported so I'm quite stuck, help please!
Click to expand...
Click to collapse
Do NOT use rom manager...can result in a brick. After you've rooted, install a custom kernel with custom recovery and then just flash the jellymod using custom recovery after placing it in the ext sd card..
Follow this guide
http://forum.xda-developers.com/showthread.php?t=2198341
Hope that helps..
Sent from my GT-I9070 using xda premium
rushilkr said:
Do NOT use rom manager...can result in a brick. After you've rooted, install a custom kernel with custom recovery and then just flash the jellymod using custom recovery after placing it in the ext sd card..
Follow this guide
http://forum.xda-developers.com/showthread.php?t=2198341
Hope that helps..
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Thank you for the quick reply, could you recommend a custom kernel to get?
Azykk said:
Thank you for the quick reply, could you recommend a custom kernel to get?
Click to expand...
Click to collapse
Go with CoCore..the same which is in the guide.. i believe that is 5.0 version.. you can update it later to 5.6 or 6.0 if you want to..
Edit- the link is to the main cocore thread.. so you can go ahead and install the latest i.e 6.0 with either twrp or cwm recovery..
Sent from my GT-I9070 using xda premium

Categories

Resources