Related
my lack of knowledge/terminology been sitting here for hours trying to root my phone with no luck. I know it is doable through ADB but I tried installing it and it didnt work. I tried the one click root method too but when it gets to the "repackage files" step, I just plain don't have the option on the menu, here are the options
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
format internal sd card
when I press the update.zip it says unverifiable whatever. ( not in the mood to reboot it just for this)
is there anything on here that actually is just straight up for a beginner?
I am completely confused past this point.
Try using Superoneclick v1.5.5
Sent from my GT-I9000 using XDA App
You're on jl2 right?
Problem is: Recovery 3e is verifiing signature on update.zip file, you'll have to get on Recovery 2e in order to root from an unsigned update.zip.
you can probably use the search fonction to find the "how To" easely. It took me less than 10 minutes gettings mine rooted.
Personnaly, all I did is flash another kernel with Odin
http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
K So I upgraded to the kernel you told me to and it booted up normally I have my market back and the superuser permissions but when I press superuser permissions it doesnt show anything other than settings which only have two trivial options.
what do I do from here.
butterbladez said:
K So I upgraded to the kernel you told me to and it booted up normally I have my market back and the superuser permissions but when I press superuser permissions it doesnt show anything other than settings which only have two trivial options.
what do I do from here.
Click to expand...
Click to collapse
That is fine if you have the superuser app show up, that means it's rooted. You won't see anything in there until an app needs superuser permission. Download titanium backup when you first boot it you well be prompted for superuser access click allow then next time you go into superuser app you will draw titanium backup in the list.
Sent from my GT-I9000 using XDA App
I love you more than anything.
How do I start adding paid apps and stuff for free? possible at all? I downloaded that and busybox
Bump i really need help im not the smartest
bump ive been trying to do this for 5 days now
super one click is the easiest way of all
make sure it is in USB Debug Mode
and that it is connected to a computer that can see your phone in ADB mode
make sure the USB drivers are installed for the Kies and Android SDK
+1 for SuperOneClick
I'm on JL2 i9000m too and rooted with SuperOneClick.
Sup guys, I've got the Bell I9000M in Canada aswell, bought it less than a month ago, and I am not on JL2.
I, instead am on JK4.
What do I have to do to root my JK4 I9000M?
Any replies would be helpful. In the end, I would love to be able to get Darkys Rom on my phone, but no one responds in that thread nor does anyone really know what to do with my phone version.
If anyone could help me out, that would be great. Thanks
Help pls
OK so to start off i had this samsung galaxy s GT-I9000M from bell and i was trying to upgrade it so that my sister could use a newer version of android and not the boring v.2 . ANYWAYS I rooted it then reboot it and it was stuck at the splash screen so i thought it was stuck and i searched for a way to fix it which was to get the PDA PHONE CSC and PIT files and put them in odin and hope for the best. well that turned out horribly wrong. i ended up getting the phone stuck in some boot loop where it flashes a white screen and turns of and it does this constantly :crying::crying::crying: I can still get to download mode but not recovery mode for some reason...... PLS HALP
Hello,
I've got a new captivate something like a week ago.
I got it with preception 10.4 rom and speed mod kernel and android 2.2.1.
The phone works very fast and I'm satisfied with the speed but the battery is draining very fast.
for example, yesterday I charged the battery and went to a friend, I pictured some photos, filmed a short video (1 minute), played a little game and after 5 hours the battery was 70%, I went to sleep and after something like 9-10 hours when I woke up the battery was 27%! Without using the phone!!
Is it normal?
And for my other questions:
1. How can I know if I have the lagfix enabled?
2. Is it good to upgrade to the official version of AT&T 2.2? Some people told that this is faster.
3. If I will change the rom should I be worried of the sim free unlock (that it will lock again)?
4. What are the best rom and kernel that will be fast and will have battery saving?
Thanks!
Elad92 said:
Hello,
I've got a new captivate something like a week ago.
I got it with preception 10.4 rom and speed mod kernel and android 2.2.1.
The phone works very fast and I'm satisfied with the speed but the battery is draining very fast.
for example, yesterday I charged the battery and went to a friend, I pictured some photos, filmed a short video (1 minute), played a little game and after 5 hours the battery was 70%, I went to sleep and after something like 9-10 hours when I woke up the battery was 27%! Without using the phone!!
Is it normal?
And for my other questions:
1. How can I know if I have the lagfix enabled?
2. Is it good to upgrade to the official version of AT&T 2.2? Some people told that this is faster.
3. If I will change the rom should I be worried of the sim free unlock (that it will lock again)?
4. What are the best rom and kernel that will be fast and will have battery saving?
Thanks!
Click to expand...
Click to collapse
I'm not too familiar with the Cognition ROM's. But I might take a look at WiFi, or you may have a app thats running in the background causing the drain. Do you have wifi or gps on all the time?
1. It was probably enabled by default. A really easy way is open File Explorer, go to your "Voodoo" folder, open it if there is a folder named "disable-lagfix", then your lagfix is not enabled. If you want to enable it, delete the "disable-lagfix" folder and reboot
2. I wouldn't waste my time with stock 2.2. Most all of the modded ROM's here are going to be better
3. I'm not familiar with that issue, never had it happen for myself
4. That is a hard question to answer, most of the Captivate devices are going to respond to a ROM/Kernel, a little bit differently. For example, my device LOVES Supernova JS5, where as your device might not run quite right on it. So my advice is to try it, if it works for you, use it. Read the threads, find a ROM that you think has really great support, so if you run into issues you can find help. Zelendel has posted in the Q&A section, threads for some of the more popular ROM's for the newer folks who get stuck
Voltage control App/RC6 and 1400 Kernel
I am currently running RC6 on my captivate with the 1300 kernel. I have no issues using and adjusting voltage control app with this set up. However, as soon as I try SGS kernel flasher and flash 1344 kernel or the 1400 kernel voltage control app begins to force close. I have removed and added back in with the same result. I am very happy with my set up, but would like to benchmark the other two. Any help would be appreciated. Thanks.
kangi26 said:
I'm not too familiar with the Cognition ROM's. But I might take a look at WiFi, or you may have a app thats running in the background causing the drain. Do you have wifi or gps on all the time?
1. It was probably enabled by default. A really easy way is open File Explorer, go to your "Voodoo" folder, open it if there is a folder named "disable-lagfix", then your lagfix is not enabled. If you want to enable it, delete the "disable-lagfix" folder and reboot
2. I wouldn't waste my time with stock 2.2. Most all of the modded ROM's here are going to be better
3. I'm not familiar with that issue, never had it happen for myself
4. That is a hard question to answer, most of the Captivate devices are going to respond to a ROM/Kernel, a little bit differently. For example, my device LOVES Supernova JS5, where as your device might not run quite right on it. So my advice is to try it, if it works for you, use it. Read the threads, find a ROM that you think has really great support, so if you run into issues you can find help. Zelendel has posted in the Q&A section, threads for some of the more popular ROM's for the newer folks who get stuck
Click to expand...
Click to collapse
Thank you very much!
I enabled the lag fix, not seeing a big improvement.
I will try to find a new rom because I can't continue with this battery.. draining like water!
1. Another questions, does a rom comes with a kernel or should I need to flash kernel too?
2. What mode does the phone need to be when I connecting it to computer to flash a rom?
3. What are this JXX all about?
4.If I am flashin to stock rom, how will it know to flash to 2.2 or it doesn't matter because the new rom is 2.2?
5. Does flashing to stock rom unroot my phone?
6. Do I need to disable lagfix before flashing new rom? If so how do I do it? just copying the disable-lagfix file back to the Voodo folder?
lol a lot a questions, but I'm sure you'll forgive me
Elad92 said:
Thank you very much!
I enabled the lag fix, not seeing a big improvement.
I will try to find a new rom because I can't continue with this battery.. draining like water!
1. Another questions, does a rom comes with a kernel or should I need to flash kernel too?
2. What mode does the phone need to be when I connecting it to computer to flash a rom?
3. What are this JXX all about?
4.If I am flashin to stock rom, how will it know to flash to 2.2 or it doesn't matter because the new rom is 2.2?
5. Does flashing to stock rom unroot my phone?
6. Do I need to disable lagfix before flashing new rom? If so how do I do it? just copying the disable-lagfix file back to the Voodo folder?
lol a lot a questions, but I'm sure you'll forgive me
Click to expand...
Click to collapse
Ok, here we go.
1. All of the ROM's come with modems and kernels
2. I would be flashing back to stock 2.1 and Master Clear before flashing a new ROM. After that is done, to flash to a custom ROM, you will be in Recovery Mode
3. The J** is, for lack of a better term, the build number. The farther down the alphabet you go the newer the release. The newest at this time is JS5.
4. When you flash to stock you'll use Odin which has stock 2.1 JF6 built in. You can get it here: http://www.mediafire.com/?0w2y31maz8mdom4 If you're going to a custom ROM, I wouldnt mess with the new Stock 2.2
5. Yes
6. I would. All you need to do(for Voodoo lagfix) is, open a File Explorer, go to your Voodoo folder and create a folder named disable-lagfix then reboot the phone
There is no reason to flash back to stock and master clear. It used to be a bigger deal but now they are all compatable. The only thing you might want to do is clear the dalvik cache in the advanced cmw menu in the recovery mode. I havent done any of this for about a month and after flashing over 10 roms im still seeing no problems.
Sent from my SAMSUNG-SGH-I897 using XDA App
Dupontrocks11 said:
There is no reason to flash back to stock and master clear. It used to be a bigger deal but now they are all compatable. The only thing you might want to do is clear the dalvik cache in the advanced cmw menu in the recovery mode. I havent done any of this for about a month and after flashing over 10 roms im still seeing no problems.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Thats probably true for you, but for the beginner it's the safest route to take. It is THE safest way to do it. The chances of things getting messed up are lessened
Elad, Check your PM
kangi26 said:
Ok, here we go.
1. All of the ROM's come with modems and kernels
2. I would be flashing back to stock 2.1 and Master Clear before flashing a new ROM. After that is done, to flash to a custom ROM, you will be in Recovery Mode
3. The J** is, for lack of a better term, the build number. The farther down the alphabet you go the newer the release. The newest at this time is JS5.
4. When you flash to stock you'll use Odin which has stock 2.1 JF6 built in. You can get it here: http://www.mediafire.com/?0w2y31maz8mdom4 If you're going to a custom ROM, I wouldnt mess with the new Stock 2.2
5. Yes
6. I would. All you need to do(for Voodoo lagfix) is, open a File Explorer, go to your Voodoo folder and create a folder named disable-lagfix then reboot the phone
Click to expand...
Click to collapse
Thank you, you're great.
About the mode I meant USB debugging or something like this.
How do I do this master clear?
About odin and all of this, when I will flash my rom I will use the captivate toolbox (http://forum.xda-developers.com/showthread.php?t=944418) so I think it will do it automatically. I want to do everything safe and I think this program is a great way to start.
Especially after I tried to backup my current rom using rom manager and it got me to recovery mode but the ok key button wasn't working, so I had to pull out the battery :S
Elad92 said:
Thank you, you're great.
About the mode I meant USB debugging or something like this.
How do I do this master clear?
About odin and all of this, when I will flash my rom I will use the captivate toolbox (http://forum.xda-developers.com/showthread.php?t=944418) so I think it will do it automatically. I want to do everything safe and I think this program is a great way to start.
Especially after I tried to backup my current rom using rom manager and it got me to recovery mode but the ok key button wasn't working, so I had to pull out the battery :S
Click to expand...
Click to collapse
I have never used the Captivate Toolbox, so I can't give you any advice on it
Take a look at you PM, see if that'll work for you
Elad92 said:
Thank you, you're great.
About the mode I meant USB debugging or something like this.
How do I do this master clear?
About odin and all of this, when I will flash my rom I will use the captivate toolbox (http://forum.xda-developers.com/showthread.php?t=944418) so I think it will do it automatically. I want to do everything safe and I think this program is a great way to start.
Especially after I tried to backup my current rom using rom manager and it got me to recovery mode but the ok key button wasn't working, so I had to pull out the battery :S
Click to expand...
Click to collapse
In recovery, the power/lock button is the ok button.
Sent from my CM7 powered captivate
sixstringsg said:
In recovery, the power/lock button is the ok button.
Sent from my CM7 powered captivate
Click to expand...
Click to collapse
I successfully installed serendipity rom with the help of kangi!
But I have a problem, when I want to enter CWM with rom manager I press "Reboot into Recovery" in the rom manager app and it reboots my phone and get me to the phone recovery (3e) and says that something was faild and I can't use the ok button because it doesn't working.
I have to pull out my battery and then turn the phone on again and then it gets me to CWM.
What is the problem? there's another way?
I don't think that pulling the battery like this is very healthy for my phone.
Elad92 said:
Thank you, you're great.
About the mode I meant USB debugging or something like this.
How do I do this master clear?
About odin and all of this, when I will flash my rom I will use the captivate toolbox (http://forum.xda-developers.com/showthread.php?t=944418) so I think it will do it automatically. I want to do everything safe and I think this program is a great way to start.
Especially after I tried to backup my current rom using rom manager and it got me to recovery mode but the ok key button wasn't working, so I had to pull out the battery :S
Click to expand...
Click to collapse
The captivate toolbox is an awsome program.
When you use it to flash a rom, it will push clockwork recovery onto the phone for you. just follow the instructions and you will be fine.
A few notes on the toolbox and Odin3,
you must have the samsung drivers installed on your computer, they take forever to install on my computer.
generally speaking, you will not need to use the 3button unless you flash someting like darky's extreme, and his instructions are very clear.
turn on debugging mode in settings/applications/development.
plug in the phone
click "flash to stock," use the one click and follow in the instructions.
let the phone fully reboot and go into sync mode, a minute later, the blue odin box will turn green and say "PASS."
Unplug the phone, turn debugging mode on again
plug in the phone, and when odin sees the phone (window will turn yellow) hit "master clear."
let the phone fully reboot again into sync mode
turn debugging mode on again
click root phone and follow the directions
If you want to open odin3, just click flash to stock with your phone unplugged and click which ever odin3 you want and it will open. This is very usefull if you want to use odin3 without the tool box.
After you flash the ROM, reboot in recovery and if you dig arround in the menus, you should see stuff about lagfix options and lagfix tweaks. make sure lagfix is enabled, if your not sure enable it and reboot into recovery. many roms install with lagfix not enabled, so yuo should always do this. once it changes the file system and reboots into recovery, go into tweaks and enable everything that has an (R) next to it. reboot and enjoy
Elad92 said:
I successfully installed serendipity rom with the help of kangi!
But I have a problem, when I want to enter CWM with rom manager I press "Reboot into Recovery" in the rom manager app and it reboots my phone and get me to the phone recovery (3e) and says that something was faild and I can't use the ok button because it doesn't working.
I have to pull out my battery and then turn the phone on again and then it gets me to CWM.
What is the problem? there's another way?
I don't think that pulling the battery like this is very healthy for my phone.
Click to expand...
Click to collapse
lol pulling the battery isnt the greatest thing to do.. but it shouldn't hurt it as long as its at one of those type of screens. If you were to pull it say.. doing a restore - that would be a fatal no-no.
Um.. if you have ROM MANAGER on your phone already it should have an "update.zip" that has all of the recovery advanced options in it.
Especially with Serendipity if you want to get into Recovery just hit the power button and click on Recovery - it will put you into the CWM recovery mode.
Elad92 said:
I successfully installed serendipity rom with the help of kangi!
But I have a problem, when I want to enter CWM with rom manager I press "Reboot into Recovery" in the rom manager app and it reboots my phone and get me to the phone recovery (3e) and says that something was faild and I can't use the ok button because it doesn't working.
I have to pull out my battery and then turn the phone on again and then it gets me to CWM.
What is the problem? there's another way?
I don't think that pulling the battery like this is very healthy for my phone.
Click to expand...
Click to collapse
With a custom ROM installed, most of the newer ones have a Extended power menu, press and hold the power button for a couple of seconds, let it go and it'll give the option for Recovery. Personally, after stock JF6, I dont have any need for ROM Manager anymore
Try to enter Recovery that way first, don't use ROM Manager, if that doesn't work, I would put the "update.zip" back on your phone, and try to re-install it again. Something may have hosed on you
Got it. Thanks everybody
FROYO4ME;11871783 as soon as I try SGS kernel flasher and flash 1344 kernel or the 1400 kernel voltage control app begins to force close. I have removed and added back in with the same result. [/QUOTE said:
BUMP - same issue here, but with Serendipity 6.2 ROM and paragon6-1400-100hz-0215-2245-cwm.zip kernel
Click to expand...
Click to collapse
I was wondering about updating to stock 2.2 but it wouldn't make sense, all the Roms here have got it already and they work good and have had all the bugs fixed (well most).
Sent from my SAMSUNG-SGH-I897 using XDA App
FIXED: Voltage Control app force close FC on Paragon RC6 1400 kernel
RashaMatt said:
BUMP - same issue here, but with Serendipity 6.2 ROM and paragon6-1400-100hz-0215-2245-cwm.zip kernel
Click to expand...
Click to collapse
ISSUE: Voltage Control app FC's on start in Paragon RC6 1400 kernel.
This is related to having previously installed the Paragon 1300 kernel (and the VC app was working there). I forgot to delete the OC/UV settings before flashing the 1400 kernel
FIXED: These steps may not ALL be necessary, but this is what I did, and it fixed the issue for me:
Uninstall Voltage Control app with TiBu
Delete /etc/init.d/S_volt_scheduler and /etc/init.d/S90scheduler (use Root Explorer or adb shell su)
Boot to CWM recovery
Delete cache and Dalvik cache
Re-flash Paragon RC6 1400 kernel ONLY (not the ROM) - paragon6-1400-100hz-0215-2245-cwm.zip
BTW I'm running Serendipity 6.2 ROM, and it's a beeautiful ride with this kernel
HTH
This was supposed to be a pm to espyel developer of paragon rom. Sorry if I misspelled name.
I can't seem to pm or post on developer section cause im new here and threes a 10 post rule. I have searched for the last month and im just stuck. I need help! I have only my captivate I internet with a barely usable weak signal so its been very frustrating. I have learned a lot from this great forum but I can't get my problem fixed still.
Here is my copy of the pm which never goes thru for some weird reason. I just need some guidance as I have probably not done this right all the way thru.
First of all I want to thank you for all your hard work on this rom. I love it! I am in need of some help and I have been researching for the past 3 weeks with no answers. Im pretty new to all this stuff but anyways let me tell you my status as of now. I rooted my phone and was able to install the 5.1 paragon rom which I like a lot. I lost some apps due to tb not able to restore my quickoffice and other important apps. My problem is I can't seem to flash back to anything other than the paragon 5.1 install date. I have the rom manager flashed to recover other dates like when the phone was still stock version but nothing else works. It always fails! I tried installing the update rc6 and something is very wrong. After installed and rebooted phone stays on for nearly 5 minutes and reboots randomly also I try restoring apps and it doesn't work. Seems very laggy and I know from all the great reviews on the rc6 that its just me having this issue. Please help!!! What can I do from here to update my 5.1? My desktop just got fixed and I have no I internet yet other than my captivate which has real weak signals at my new house. I don't use the odin program you mention because of the desktop being down for over a month. Im limited to internet providers at the new house and I need to get it going soon. My captivate has been my internet portal for the last month and it sucks compared to my desktop not to mention poor signals here. I would like to tether my captivate to my desktop as well but have no clue on how to get it to work. I don't flash back to stock like you mention in your steps but I do delete data and cache and all. Like I said I love the work that you do and would love to donate soon. What can I do to enjoy the updates and full capabilities of this rom? Please help! Thanks in advance!
I would power phone off, hold volume up and down and power. When at&t comes up let go
Wipe cache partition
Go back
Advanced clockwork
Wipe davlik cache
Go back
Install zip from sd
Choose zip
Rc6
Flash
When done go back
Wipe both cache again
Factory reset
boot
See if that fixes it. Did you have oc settings saved at boot?
Odin would be nice though
Sent from my Captivate using XDA Premium App
I recommend using odin to flash back to stock and also do a master clear. After this you need to re-root, install rom manager, flash clockwork, reboot to recovery, and install rc6 from scratch. This method is recommended to avoid common issues. Good choice with paragon. Killer rom.
Sent from my SAMSUNG-SGH-I897 using XDA App
jayjr1105 said:
I recommend using odin to flash back to stock and also do a master clear. After this you need to re-root, install rom manager, flash clockwork, reboot to recovery, and install rc6 from scratch. This method is recommended to avoid common issues. Good choice with paragon. Killer rom.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
He does not have a pc with internet connection. I do not believe odin is an option at the moment
Sent from my Captivate using XDA Premium App
^^^ Thanks for the replies guys.
Good news is I got my desktop internet up temporarily using a wireless card and got a weak open signal.
Bad news is I am still lost! What Odin do I need and where can I download it from?
I tried searching and only found the odin3 but I'm hesitant to proceed with anything without getting some more info. What version do I need for my windows computer? 32 or 64 bit?
I have the SDK Manager on my desktop as well but still have no clue what to do with it or how to use it. I'm still looking into that.
Also, how can I get my phone to tether my desktop and get internet signal?
Is RC6 a full rom or just an update?
If I flash back to stock and reinstall RC6 would I need RC5.1 first then the RC6 update?
turbosr123 said:
Bad news is I am still lost! What Odin do I need and where can I download it from?
I tried searching and only found the odin3 but I'm hesitant to proceed with anything without getting some more info. What version do I need for my windows computer? 32 or 64 bit?
Click to expand...
Click to collapse
start>>run...type msinfo32.exe and enter...a window will come..click system summary..see system type on right hand side....x86 means 32 bits and x64 means 64 bits....So download Odin3 one click version for whatever version u have...its pretty simple...just download and start Odin...then put ur phone is download mode and plug the USB in the phone..if everything is right, u will see COM in Odin in yellow color...just click start and wait till it reboots
Also check the Odin for your phone...there is one for JH7 and one for Jh6....
turbosr123 said:
Also, how can I get my phone to tether my desktop and get internet signal?
Click to expand...
Click to collapse
you cant tether in stock 2.1(which u will get after using ODIn), but if u root ur phone use wireless tether 2.0.7 app
if u r still on paragon then go to settings>>wireless and network>> USB tethering...or wireless tethering...samsung has inbuilt settings for that in 2.2
I can walk u through odin steps pm me if u like I can also send you the correct odin to use
sent from cappy with di11i rom
mcord11758 said:
I would power phone off, hold volume up and down and power. When at&t comes up let go
Wipe cache partition
Go back
Advanced clockwork
Wipe davlik cache
Go back
Install zip from sd
Choose zip
Rc6
Flash
When done go back
Wipe both cache again
Factory reset
boot
See if that fixes it. Did you have oc settings saved at boot?
Odin would be nice though
Sent from my Captivate using XDA Premium App
Click to expand...
Click to collapse
Thanks I will try and use odin3 to figure this out, but is the RC6 an update or a full rom?
viny2cool said:
start>>run...type msinfo32.exe and enter...a window will come..click system summary..see system type on right hand side....x86 means 32 bits and x64 means 64 bits....So download Odin3 one click version for whatever version u have...its pretty simple...just download and start Odin...then put ur phone is download mode and plug the USB in the phone..if everything is right, u will see COM in Odin in yellow color...just click start and wait till it reboots
Also check the Odin for your phone...there is one for JH7 and one for Jh6....
you cant tether in stock 2.1(which u will get after using ODIn), but if u root ur phone use wireless tether 2.0.7 app
if u r still on paragon then go to settings>>wireless and network>> USB tethering...or wireless tethering...samsung has inbuilt settings for that in 2.2
Click to expand...
Click to collapse
Thanks! I got the right driver and odin3 installed now and I'm tethering as well. works great!
Now I need to try and install RC6 update again using odin3 to flash back to stock. I hope it works with no issues!
Just so I'm on the right track.... Odin3 is the right odin program that I use right?
I don't know what jh7 or jh6 is. How do I check for this?
oxlong27 said:
I can walk u through odin steps pm me if u like I can also send you the correct odin to use
sent from cappy with di11i rom
Click to expand...
Click to collapse
Thanks! I will pm you before I use the wrong odin and brick the phone.
Rc6 should have a full rom version, I do not recall if there was a no wipe. Make sure you have the full wipe rom if flashing from stock
Sent from my Captivate using XDA Premium App
if you already have paragon rc 6 just simply do factory reset back-up your apps with the included titanium back-up, wipe dalvik cache and wipe battery stats from cwm recovery menu then reboot your phone. I doubt if you have tweak the over clocking/ voltage apps and not resetting it back to factory default when updating to rc 6 this may cause some issues. if you can open your oc/voltage control app in the menu simply remove boot setting, reset all the voltage slider to 0 and limit overclocking to 1000 mhz then apply, after that do tibu, factory reset, wipe dalvik cache and battery stats then reboot.
if you already have paragon rc 6 just simply do factory reset back-up your apps with the included titanium back-up, wipe dalvik cache and wipe battery stats from cwm recovery menu then reboot your phone. I doubt if you have tweak the over clocking/ voltage apps and not resetting it back to factory default when updating to rc 6 this may cause some issues. if you can open your oc/voltage control app in the menu simply remove boot setting, reset all the voltage slider to 0 and limit overclocking to 1000 mhz then apply, after that do tibu, factory reset, wipe dalvik cache and battery stats then reboot.
gorgy76 said:
if you already have paragon rc 6 just simply do factory reset back-up your apps with the included titanium back-up, wipe dalvik cache and wipe battery stats from cwm recovery menu then reboot your phone. I doubt if you have tweak the over clocking/ voltage apps and not resetting it back to factory default when updating to rc 6 this may cause some issues. if you can open your oc/voltage control app in the menu simply remove boot setting, reset all the voltage slider to 0 and limit overclocking to 1000 mhz then apply, after that do tibu, factory reset, wipe dalvik cache and battery stats then reboot.
Click to expand...
Click to collapse
You know I did mean to mention this!!!
I did adjust my voltage and saved them. I remember running a quad test result of 1454. I never did remove the boot though! Maybe that's all that it was not able to flash to stock and rc6 not functioning right!!!
Thanks I'll give this a try.
So I used odin3 to flash back to stock 2.1 eclair.
Now I can't root my phone anymore!
Usb drivers are not picking up the device and I can't use desktop to transfer root files. I tried downloading some root zips to my phone but it doesn't except the downloads. I can't flash using clockwork because I am not rooted now.
I can't get adb to work even though I follow each step by step of the sdk download.
I'm in a worst situation now than before. Any help would be appreciated!!!
turbosr123 said:
So I used odin3 to flash back to stock 2.1 eclair.
Now I can't root my phone anymore!
Usb drivers are not picking up the device and I can't use desktop to transfer root files. I tried downloading some root zips to my phone but it doesn't except the downloads. I can't flash using clockwork because I am not rooted now.
I can't get adb to work even though I follow each step by step of the sdk download.
I'm in a worst situation now than before. Any help would be appreciated!!!
Click to expand...
Click to collapse
paragon rc 6 is already pre rooted you don't need to root your phone when installing paragon rc 6 just download the full room and the update zip and paste/copy it into your internal sd card. try installing samsung kies mini in your computer it will also install the corresponding driver. once your computer running odin recognizes your phone do a master clear. to do this just enable debugging mode but don't turn off your phone your phone will then reboot itself after the process. install the update zip first with cwm you have to do it twice. first the 3 button combo recovery it is a blue one the default in eclair then install update zip http://forum.xda-developers.com/attachment.php?attachmentid=490798&d=1295155828 once you have install it it will be back again to recovery mode and now a green color now install again the full rom of paragon rc6 http://xda.deanhatescoffee.com/roms/paragon-rc6-full.zip then wait for the phone to reboot.
I just wanted to give a BIG thanks to oxlong27.
You saved me big time from bricking my phone and loosing all data or worst.
They need a counter next to the thanks button! Haha!
I appreciate you going out the way and guiding me step by step over the phone, email, and text. I love my phone more than ever now!!! Everything works great and I'm lovin' the di11ligaf rom. Thanks a bunch bro!!! I didn't think this forum had members like you but I was wrong. Thanks to everybody else who replied with suggestions too!
So the story goes I installed Assonance on my Captivate from Official 2.2. Started having problems with the phone being stuck in Landscape mode. This problem followed when I installed Firefly. So I decided to try to go back to JF6 and clear everything. Couldn't get into download mode so downloaded a CMW flashable zip of JH7 and after installing the phone just sits at the AT&T World Phone screen. Can't get into Download mode with volume down + power or volume up down + usb. Need advice to try to get phone fixed/replaced, i'm stuck using a BlackBerry Bold. Any help please?
Google usb jig
CM7
Figured
Yeah that's what I figured. The only thing I'm curious about is the landscape mode issue following me around on different ROMS. After I hopefully unbrick the phone do you think it would be worth taking it to ATT?
Go to radioshack, 99 cents, use the video below for reference. You need 3 100k OHM resistors, and they run .99 cents for 5 of them. Use that to kick it into Download Mode and reflash. As for returning it to AT&T, if the orientation problem continues, I would if this doesn't fix anything.
http://www.youtube.com/watch?v=D0aoabVtPJ8
What Kernel did you flash before everything went haywire? This is a classic sign of an i9000 kernel being flashed to a Captivate.
Forget download mode for the moment, can you get back into recovery?
It's true. But, theres no reason the kernel wouldn't flash over during CWM. Not to mention, if that were the case it would also almost certainly display other i9000 kernel issues, like external SD mounting and headphone logic. I think something else is the culprit here.
geokhentix said:
It's true. But, theres no reason the kernel wouldn't flash over during CWM. Not to mention, if that were the case it would also almost certainly display other i9000 kernel issues, like external SD mounting and headphone logic. I think something else is the culprit here.
Click to expand...
Click to collapse
Sounds like lagfix present in Firefly was not disabled before flashing to stock, hence an ext4/jfs file conflict. OP, please let me know if you can reboot to recovery.
clemmie said:
Sounds like lagfix present in Firefly was not disabled before flashing to stock, hence an ext4/jfs file conflict. OP, please let me know if you can reboot to recovery.
Click to expand...
Click to collapse
hmmmn I agree. too many bricked phones not disabling lagfix and clock default values in their kernel when flashing back to stock. seems many forgot that procedure. every dev always states here to disable lagfix when flashing new rom and set back default clock values in current kernel. the very first step neglected PITA to troubleshoot.
Before you go and buy anything, did you try this method (sorry, if you said you did)? It always works for me, especially at the "Phone--!--Computer" screen.
FROM: How to unbrick the totally bricked captivate. [Click the > after "Originally Posted by thekurrgan" for the full source.]
thekurrgan said:
So far this has been the only sure fire method I've found to 100% get around any brick situation regardless of firmware, etc. This only works for the captivate, not any other galaxy s variant.
Situations: phone-!-Computer / no download mode
Black Screen / RST_STATUS 0x0
Procedure:
1. Remove the battery, external SD card and SIM card.
2. Wait 10 seconds.
3. Open odin3
4. Connect usb cable.
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
Click to expand...
Click to collapse
If he was using odin one click it repartitions automatically. If full version as long as repartition is clicked odin gets rid of the lag fix.
My point is that as long as repartition is enabled the lag fix is not his issue
CM7
mcord11758 said:
If he was using odin one click it repartitions automatically. If full version as long as repartition is clicked odin gets rid of the lag fix.
My point is that as long as repartition is enabled the lag fix is not his issue
CM7
Click to expand...
Click to collapse
It says nowhere in the OP that he used one click; as a matter of fact:
jonp92 said:
Couldn't get into download mode so downloaded a CMW flashable zip of JH7 and after installing the phone just sits at the AT&T World Phone screen.
Click to expand...
Click to collapse
I've seen this many many times, and it is usually a result of a non-disabled lagfix or OC kernel. I've been down this road with a few people. He may be trying to use one-click now, but without being able to get into DL mode he's stuck. I'm trying to help him get into DL mode, as are other posters. Let's just focus on getting him to DL mode.
buy this:
http://cgi.ebay.com/ws/eBayISAPI.dl...69781&ssPageName=STRK:MESELX:IT#ht_623wt_1139
Please I need help! I was trying to flash speedmod kernal k13 and when odin finished up and rebooted my phone it just kept having this vibration pattern at the start up screen. Odin sees the phone on the COM port when I connect the phone on the Galaxy S scren but the 3-button combo will not work to put me into download mode so I can fix this. Please any advice would help P.S. I hope not to do the JIG method but I guess if it is the only thing left I can try it.
If you did a search regarding your problem you could find many similar threads here but anyhow please explain your previous kernel did you have any lagfix before? which rom you were using? what kind of partitions you had?
for now maybe you can try removing your battery for a few minutes and replace it and get 3 key for download mode and see if it works
taha_e said:
If you did a search regarding your problem you could find many similar threads here but anyhow please explain your previous kernel did you have any lagfix before? which rom you were using? what kind of partitions you had?
for now maybe you can try removing your battery for a few minutes and replace it and get 3 key for download mode and see if it works
Click to expand...
Click to collapse
I was on GingerReal 3.2 before and I had lag fixes on it. Then I flashed back to stock JVB because I was going to install CM7 but when I tried to put the speedmod kernal on my I9000 while on STOCK JVB I think I might have done it incorrectly in Odin. Now my ohine just has a vibrate pattern of 1-3-1-3... at the Galaxy S start-up screen. I removed my battery for about an hour or two and I cant get it into download mode to get the 3 button fix, if thats what you mean by "3 key".
streamline75 said:
Please I need help! I was trying to flash speedmod kernal k13 and when odin finished up and rebooted my phone it just kept having this vibration pattern at the start up screen. Odin sees the phone on the COM port when I connect the phone on the Galaxy S scren but the 3-button combo will not work to put me into download mode so I can fix this. Please any advice would help P.S. I hope not to do the JIG method but I guess if it is the only thing left I can try it.
Click to expand...
Click to collapse
Are you able to get in to recovery mode? (vol up + home + power)
If you can I would suggest mounting your memory card using clockwork, copy over a new kernal and install a JVB compatible kernal from there as speedmod is not for 2.3+ firmwares
If you are unable to get in to recovery mode then a jig is the way forward, when you get in to download mode you can then flash stock