Related
I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Uh... sounds like something is seriously wrong with your phone dude =\ You should be able to get to d/l mode regardless. Does the phone still work fine otherwise?
Unable to root sgs gingerbread NEJVD
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
samgal111 said:
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
Click to expand...
Click to collapse
Did you try diffrent usb port on your cpu?
also..on the cpu that your using odin to flash , do you have kies installed?
if so make sure it isn't running ( i would uninstall just incase)
see if that helps.
Sent from my i9000t XDA app
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
caribbean_spur said:
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
afalk said:
I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Click to expand...
Click to collapse
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Dorilife said:
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
Click to expand...
Click to collapse
Thanks for the reply! Ok, I finally manage to have the 3button combo work and get into download mode and recovery mode. I want to root, can you tell me if the odin method works on 2.3.3 stock, on I9000T . Also, How can I fully backup my phone. Which android version did you have when you rooted.
Also, I keep reading those very old threads and I was wondering what the latest Odin version is used for 2.3.3.
elita said:
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Click to expand...
Click to collapse
Tried this workaround, but still no luck with Odin. When fone is in download mode, I get the message apling multi-csc...Installing multi-csc then "unable to access system/csc/H3G/system/".Couldnt roll back the os through kies either before I uninstalled it. Any help highly appreciated
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Wrong button combo
caribbean_spur said:
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Click to expand...
Click to collapse
Turns out We/I have been using the wrong button combo for download. Download mode is: Vol DOWN+Home+Power On.!!! Recovery mode is Vol UP+Home+Power On. I used Fuguroot with my stock kernel from RAMAD (senior developer). Flashed with odin & it took LESS THAN 2 MIN! Check out this link here http://forum.xda-developers.com/showthread.php?t=1011901.Hope this helps. Do remember to thank Ramad and Nicademus!
good you figured out
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
rrubio999 said:
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
Click to expand...
Click to collapse
I don't have a galaxy tab, but it should be similliar to my galaxy s. I think your device is NOT bricked. As long as you can get to download mode, your device is NOT bricked. If you can get there, you should try to flash with odin/heimdall again. I think you must have done something wrong in the flashing process. AFAIK the logo is displayed by bootloader (primary), so if nothing went wrong with flashing the secondary one (download mode), you should be able to flash again.
Hi, I was using ODIN3 JF6 for porting my 2.2 to 2.1 eclair rom.. once the flashing done with no problem it gives me Reset phone.. then the phone reset it only shows me At&T logo continuosly again and again.. I tried to get on download mode in all ways but nothing.. adb doesn't recognize the phone and no com port on odin .... is it defintely bricked?????
early81 said:
Hi, I was using ODIN3 JF6 for porting my 2.2 to 2.1 eclair rom.. once the flashing done with no problem it gives me Reset phone.. then the phone reset it only shows me At&T logo continuosly again and again.. I tried to get on download mode in all ways but nothing.. adb doesn't recognize the phone and no com port on odin .... is it defintely bricked?????
Click to expand...
Click to collapse
If you can see a screen, it's not bricked. For download mode, did you try (from a powered-off state) holding Vol+ and Vol-, then inserting the USB plug? You may also have to take the battery out, hold v+/v-, insert plug, then insert battery.
If those don't work, look into getting yourself a jig.
jmtheiss said:
If you can see a screen, it's not bricked. For download mode, did you try (from a powered-off state) holding Vol+ and Vol-, then inserting the USB plug? You may also have to take the battery out, hold v+/v-, insert plug, then insert battery.
If those don't work, look into getting yourself a jig.
Click to expand...
Click to collapse
yes i get the AT&T logo infinite looping but no way to get download mode.. yes I even tried the vol+vol- ...
If those combinations aren't working for you, you will most likely need to either buy or make yourself a jig. It's not very expensive - either buy 3 resistors at an electronics store, or see if you can find one on Ebay. That's the easiest, most surefire way to get into download mode.
One last thing to try, though, just in case - try holding Vol- and Power from a powered-off state. That's the Gingerbread combination for i9000 bootloaders, but it won't hurt to try them.
jmtheiss said:
If those combinations aren't working for you, you will most likely need to either buy or make yourself a jig. It's not very expensive - either buy 3 resistors at an electronics store, or see if you can find one on Ebay. That's the easiest, most surefire way to get into download mode.
One last thing to try, though, just in case - try holding Vol- and Power from a powered-off state. That's the Gingerbread combination for i9000 bootloaders, but it won't hurt to try them.
Click to expand...
Click to collapse
no way I tried all combinations many times ..no way to get download mode.. i will keep on ebay the jig..many thanks ..i iwll let know in post if I ll solve this
Once you get into download mode, don't flash jf6 newer phones don't like that firmware and they do exactly what your's is doing. Bootloop and broken button combos.
Flash any other firmware other than jf6 and you'll be good.
studacris said:
Once you get into download mode, don't flash jf6 newer phones don't like that firmware and they do exactly what your's is doing. Bootloop and broken button combos.
Flash any other firmware other than jf6 and you'll be good.
Click to expand...
Click to collapse
where can I get a new firmware with Odin??.. I supposed the odin JF6 was the best for resuming 2.1 stock firmware.. can you please post me a link on xda of a similar odni firmware?
I used JF6 only beacuse on the forum it said that is the best for installing the i9000 bootloader and kernel... thanks
Here ya go... [Stock ROMs](OneClicks Master Collection)+[Kernels (Stock & w/ CWM)]+[Modems] UPDATED ---- These are all i897 firmwares, some with the choice of i897 GB Bootloaders included and some without.
ok I get the jig.. finally I get the download mode ,, I 'm trying to install the 2.3.3 kernel +bootloader UCKF1 is this ok?
thanks
early81 said:
ok I get the jig.. finally I get the download mode ,, I 'm trying to install the 2.3.3 kernel +bootloader UCKF1 is this ok?
thanks
Click to expand...
Click to collapse
That should work, as you're installing a Gingerbread Rom, you'll need the matching bootloaders.
Just make sure you have a good connection to your computer, and that your computer won't lose power in the process.
jmtheiss said:
That should work, as you're installing a Gingerbread Rom, you'll need the matching bootloaders.
Just make sure you have a good connection to your computer, and that your computer won't lose power in the process.
Click to expand...
Click to collapse
Hi, thank you all ,, all worked 100% .. one more thing.. why the bootloader is not the i9000 bootloader ? if I want to install the cm7 can I just install from market the rom manager?? .. and about the root+busybox .. does the super-one click works with 2.3.3 ?
early81 said:
Hi, thank you all ,, all worked 100% .. one more thing.. why the bootloader is not the i9000 bootloader ? if I want to install the cm7 can I just install from market the rom manager?? .. and about the root+busybox .. does the super-one click works with 2.3.3 ?
Click to expand...
Click to collapse
Glad to hear it worked.
- UCKF1 uses the AT&T Gingerbread bootloaders, not the i9000. You have the option to flash the i9000 ones separately, but I wouldn't recommend it, as there really isn't a pressing reason to put yourself in that danger.
- If you want to try CM7 again, I would recommend installing it separately from Rom manager - rom manager tends to be problematic.
- I don't think super one-click works with 2.3.x roms. You'll need to flash a kernel with CWM baked in (like boog's kernel) using Odin or Heimdall, then flash CM7.
- I don't think super one-click works with 2.3.x roms. You'll need to flash a kernel with CWM baked in (like boog's kernel) using Odin or Heimdall, then flash CM7.
Click to expand...
Click to collapse
thank you lot for helping me .. if I install directly this one:
With Bootloaders - Link 1 / Link 2 [With CWM Injected Kernel from Boog]
Boog includes recovrey.. so once install this I can get even recovery ready for cm7???
On the page of one-clicks, in this section:
I897UCKH3 Android 2.3.4 Gingerbread
With Bootloaders - Link 1 / Link 2 [With CWM Injected Kernel from Boog]
Heimdall Package, With Bootloaders - Link to thread - by AdamOutler
Without Bootloaders - Link to thread - by 4-2ndtwin [With CWM Injected Kernel from Boog]
Heimdall Package, Without Bootloaders - Link to thread - by jmtheiss [With CWM Injected Kernel from Boog] (Not tested)
Stock Kernel - Link 1 / Link 2
Kernel with CWM - Link to thread - by Boog
Use one of the two that I have left highlighted. If you want to use Odin, use the first one. If you prefer Heimdall, use the second one. Either one will get you to a stock state, with CWM, so that you can flash CM7. And, both will do this without flashing bootloaders. Definitely, no matter what, do not choose a package with bootloaders. You want a package that says "no bootloaders".
Use one of the two that I have left highlighted. If you want to use Odin, use the first one. If you prefer Heimdall, use the second one. Either one will get you to a stock state, with CWM, so that you can flash CM7. And, both will do this without flashing bootloaders. Definitely, no matter what, do not choose a package with bootloaders. You want a package that says "no bootloaders".
Click to expand...
Click to collapse
ok I did all ,,how to enter in recovery mode?? the vol down + power button isn' t working ...
early81 said:
ok I did all ,,how to enter in recovery mode?? the vol down + power button isn' t working ...
Click to expand...
Click to collapse
Recovery on your phone is now holding Vol+/Vol-/Power. Download will be Vol+/Vol- and inserting the USB cable.
jmtheiss said:
Recovery on your phone is now holding Vol+/Vol-/Power. Download will be Vol+/Vol- and inserting the USB cable.
Click to expand...
Click to collapse
... is not working.. it keeps showing me AT&T logo until I leave the power button,, but once i leave it starts normal use..and not recovery..
EDIT : WITH ADB REBOOT RECOVERY IT WORKS , IT GOES IN CWM 4.0.1.5 ,, TRYING TO INSTALL CM7 .. HOPE WILL WORK
You need a jig. I'm guessing your build number higher then 1010.
Sent from my I897 using XDA App
early81 said:
... is not working.. it keeps showing me AT&T logo until I leave the power button,, but once i leave it starts normal use..and not recovery..
EDIT : WITH ADB REBOOT RECOVERY IT WORKS , IT GOES IN CWM 4.0.1.5 ,, TRYING TO INSTALL CM7 .. HOPE WILL WORK
Click to expand...
Click to collapse
That's good to hear. Let us know if you need more help.
Idk what the deal is with 1010 builds, I have a 1012 build and everything works on it, even JF6 Odin one click!
Sent from my SAMSUNG-SGH-I897 using xda premium
[Q] Boot Loop with no recovery or download mode (R&D mode fixed, stuck in Boot Loop)
HI Guys
Need some help, I've been searching the previous post of similar problems but nobody seems to have my issue.
The story so far, I was updating my wife's GalaxyS i9000 Kernel with the latest version of CF-Root. (It was running stock version of Eclair 2.1) I couldn't get into download or recovery mode before the flash, so i used ADB to force it into Download mode then used Odin to update the PDA file. It all worked ok then i rebooted the phone and that is where the problem started. It just gets stuck rebooting to the GalaxyS GT-i9000 Screen over and over and over again. I've tried the 3 button recovery or download option and that doesn't work. So i am at a loss everyone. Any Ideas? I was thinking i might need to make up a usb jig.
Any help would be much appreciated as this is my wife's phone so you can understand the stress!
Sounds like you are the lucky owner of an i9000 with a faulty SBL which prevents you using the 3 button combo.
If you can't get download mode you'll need a jig to recover it, then look into this to fix the 3 button combo.
Great it worked! So 3 button combo works, Do you have any ideas on how to get the phone out of the boot loop that it is stuck on without wiping user data like sms and stuff of the phone?
You were running rooted 2.1 correct? What did you flash in Odin that broke it?
*Might* be as simple as reflashing the right CF-root for your firmware.
Thats were i went wrong, i tried to root from stock to CF-Root-XX_UNK_JVQ-v3.7-CWM3RFS so i've been trying to find a stock version to go back too.
Link to Stock Firmware.
http://forum.xda-developers.com/showthread.php?t=1102881
Is there a way to flash to Froyo from eclair without losing any data?
HELP!!!
Im stuck on boot logo and I cannot flash anything on PC Odin. And I cannot access Recovery Mode (Neither CWM or system recovery). I can only go into Download Mode.
I was on CheckRom NoteHD and I used the kitchen app to download franco kernel and one of the mods (Use camera flash below 15% to be precise) and as soon as I installed, it didn't let me boot back into Checkrom!!! And Now im stuck on boot logo no matter how hard I try. I did try flashing the wipe ROM (Pre-rooted Open Europe 2.3.6 LC1), I also tried flashing the CF-Root file but still no luck. PC Odin says failed in between the process!!
Please Help me guys.. I don't know what really went wrong as I have installed stuff from the KitchenPro App before.
What can I do now?
Thanks
roni2915 said:
HELP!!!
Im stuck on boot logo and I cannot flash anything on PC Odin. And I cannot access Recovery Mode (Neither CWM or system recovery). I can only go into Download Mode.
I was on CheckRom NoteHD and I used the kitchen app to download franco kernel and one of the mods (Use camera flash below 15% to be precise) and as soon as I installed, it didn't let me boot back into Checkrom!!! And Now im stuck on boot logo no matter how hard I try. I did try flashing the wipe ROM (Pre-rooted Open Europe 2.3.6 LC1), I also tried flashing the CF-Root file but still no luck. PC Odin says failed in between the process!!
Please Help me guys.. I don't know what really went wrong as I have installed stuff from the KitchenPro App before.
What can I do now?
Thanks
Click to expand...
Click to collapse
First this:Turn off the device and pull the battery, wait for 30 seconds and try to get in recovery mode, if that works reflash CheckRom. If that doesn`t work pull the battery again and get in downloadmode and connect to the pc and see if Odin recognizes the phone. If it does flash any stock rom.
gee2012 said:
First this:Turn off the device and pull the battery, wait for 30 seconds and try to get in recovery mode, if that works reflash CheckRom. If that doesn`t work pull the battery again and get in downloadmode and connect to the pc and see if Odin recognizes the phone. If it does flash any stock rom.
Click to expand...
Click to collapse
I tried the exact same thing you mentioned and no, it doesn't go into recovery mode. and yes, it does go into download mode but it fails to flash. I tried 2-3 different firmware versions of 2.3.6, 4.0.3 and I'm pretty sure the downloaded files aren't corrupt!! I don't know what to do...
The only thing working is getting to download mode but then thats no point since I can't flash any ROM.
roni2915 said:
I tried the exact same thing you mentioned and no, it doesn't go into recovery mode. and yes, it does go into download mode but it fails to flash. I tried 2-3 different firmware versions of 2.3.6, 4.0.3 and I'm pretty sure the downloaded files aren't corrupt!! I don't know what to do...
The only thing working is getting to download mode but then thats no point since I can't flash any ROM.
Click to expand...
Click to collapse
There are threads about reviving recovery i think on xda, haven`t needed them so far but look around and you will find them. If you can`t restore recovery or downloadmode then it`s off to the shop i guess
Does Odin recognize your phone, what exactly goes wrong when flashing with Odin?
roni2915 said:
I tried the exact same thing you mentioned and no, it doesn't go into recovery mode. and yes, it does go into download mode but it fails to flash. I tried 2-3 different firmware versions of 2.3.6, 4.0.3 and I'm pretty sure the downloaded files aren't corrupt!! I don't know what to do...
The only thing working is getting to download mode but then thats no point since I can't flash any ROM.
Click to expand...
Click to collapse
i have the same situation like you before ...try this ..http://forum.xda-developers.com/showthread.php?t=1667886 i works for me..hope it works for you too...
"Battery Too Low, Can't Download"
Now there's another problem.
Not only I Can't flash anything, I can't even get to Download Mode because the battery is low.
When I press the Vol Down + Power + Home key, I get "Low Battery, Can't Download" in red font.
I left my phone on charge through the AC port and I had no idea it wouldn't charge. The only thing was that my phone was exteremly hot but still with zero battery. I even tried plugging the phone through the USB cable but still no luck.
I removed battery for few minutes upto 30 mins and put it back in and plugged in the charger but all I see is the empty battery symbol keeps flashing every 5 seconds.
Is there any way I can charge my battery and get back to download mode so I could try flashing the stock kernel to get past the boot screen? I even tried plugging in the USB jig that I used with my SGSII previously, but it was of no use as well.
Please Help!!!
your only option is to use a universal charger external, or borrow another note to put your battery in.
once your battery is full you can carry on the previous steps
good luck
ac-milan said:
your only option is to use a universal charger external, or borrow another note to put your battery in.
once your battery is full you can carry on the previous steps
good luck
Click to expand...
Click to collapse
i will probably take it to best buy because i dunt know anyone that owns a note.. only I'm the cool one
hopefully i can charge my battery at best buy and then go on with the process!!
Hey,
I managed to buy an external charger and I was able to go to Download Mode again.
After that I tried to flash stock kernel (stockKernelXXLA4.tar) And Odin said "Pass".
After that I was stuck on the Samsung Galaxy Note GT-N7000 Logo again.
I'm not sure what to do now!!
Please help.
Is there anything else that I could flash?
Even though I flashed a stock kernel, I still see a yellow exclamation mark..
PLEASE HELP, I NEED MY NOTE TO COME BACK TO LIFE!
Sorted this mess out!!!
I flashed "N7000JPLPD_N7000OJPLP7_N7000XXLPT_HOME.tar" And the phone now works!!!
Stock kernels didn't do the work for me, but the official ICS release did.
Thanks to all that contributed in the thread.
is the new release can do ?
i'm using the LPT / LQ2, and the flashing process very long like stuck in firmware upgrade process. The bar just like never move for half our alrd.
how long you take for yours ?
antique_sonic said:
is the new release can do ?
i'm using the LPT / LQ2, and the flashing process very long like stuck in firmware upgrade process. The bar just like never move for half our alrd.
how long you take for yours ?
Click to expand...
Click to collapse
it only took me 5-8 minutes...
It goes into Recovery mode ok but no download mode.
Power + vol down (or vol down + vol up) + home makes it loope the galaxy screen once then it just loads the built in rom.
After I first bought it I could get it into download mode. But after rooting her so many times she refuses to play ball.
I have tried unrooting it and uninstalling busybox / CWM etc but don't know what else to try.
is there anyway of resetting the "bios" of the phone to default or something?
I tried restoring the stock build.prop.
Dunno what else to do.
Any advice much appreciated.
Regards.
did u tried entering download mode through terminal?
in the terminal :
su
reboot download
and u ll be in download mode n if this doesnt work then try flashing new rom
Sent from my OCTA CORE I9500
He can't get into download or recovery because 5830v is an Aussie version with secure kernel. He needs a USB Jig to get his phone into download mode. However he can root the device by enabling USB debugging and installing the latest drivers and then running an exploit like Moto-Chopper (same as I have done). Then I'd advise using Galaxy Toolbox to unlock the device and backup the EFS. Then I would generate the PIT file and use EFS to do all full image backups of the device. I would buy/make a USB jig and then flash a custom recovery. Then flash new kernel. Then after all of that you may now flash a new ROM. Avoid Odin where ever possible. The 5830v is NOT the same as the 5830i. The i can handle software from the v but not visa versa.
Take that as a word of warning.
Edit: I posted in this thread because there is very little information of XDA about the Galaxy Ace GT-5830v
AdroidOre said:
It goes into Recovery mode ok but no download mode.
Power + vol down (or vol down + vol up) + home makes it loope the galaxy screen once then it just loads the built in rom.
After I first bought it I could get it into download mode. But after rooting her so many times she refuses to play ball.
I have tried unrooting it and uninstalling busybox / CWM etc but don't know what else to try.
is there anyway of resetting the "bios" of the phone to default or something?
I tried restoring the stock build.prop.
Dunno what else to do.
Any advice much appreciated.
Regards.
Click to expand...
Click to collapse
Hi have you tried using a JIG
please help
Jarmezrocks said:
He can't get into download or recovery because 5830v is an Aussie version with secure kernel. He needs a USB Jig to get his phone into download mode. However he can root the device by enabling USB debugging and installing the latest drivers and then running an exploit like Moto-Chopper (same as I have done). Then I'd advise using Galaxy Toolbox to unlock the device and backup the EFS. Then I would generate the PIT file and use EFS to do all full image backups of the device. I would buy/make a USB jig and then flash a custom recovery. Then flash new kernel. Then after all of that you may now flash a new ROM. Avoid Odin where ever possible. The 5830v is NOT the same as the 5830i. The i can handle software from the v but not visa versa.
Take that as a word of warning.
Edit: I posted in this thread because there is very little information of XDA about the Galaxy Ace GT-5830v
Click to expand...
Click to collapse
Hey Jarmezrocks!
I have an Australian Samsung galaxy ace gt s5830V. I am finding incredibly hard to find any info on how to fix the bootloop on my screen. As per your advice I have purchased a usb jig ( to get my phone into dl mode). But as my phone is not rooted and I have never put any upgrades or roms on it I'm a bit puzzled as to why it has done this and how to fix it. In your post you say not to use Odin. Why is that and what can I do instead?
Your help would be greatly appreciated because all the info on here is mainly directed at s5830i.
Thanks
scarletshay said:
Hey Jarmezrocks!
I have an Australian Samsung galaxy ace gt s5830V. I am finding incredibly hard to find any info on how to fix the bootloop on my screen. As per your advice I have purchased a usb jig ( to get my phone into dl mode). But as my phone is not rooted and I have never put any upgrades or roms on it I'm a bit puzzled as to why it has done this and how to fix it. In your post you say not to use Odin. Why is that and what can I do instead?
Your help would be greatly appreciated because all the info on here is mainly directed at s5830i.
Thanks
Click to expand...
Click to collapse
Avoid Odin trying to flash a custom ROM, use it only when you need to. Flashing a more insecure kernel that enables download mode without the use of the USB jig in other words.
For you it maybe as simple as booting into recovery mode and simply doing a factory data reset? That should wipe any data that maybe stopping the device from booting correctly? After factory reset you should be able to flash a custom recovery zip from the factory recovery? I can re-upload what I used that was successful with the S5830V if you are stuck?