I put the new GingerDX v23b rom and now my xperia keeps rebooting after the SE logo.I reflashed 015 baseband i eventried to flash alfs kernel but its still restarting and no one else has the same problem .... I also installed from xrecovery soem zip with some alfs addon dont remember what was it it was right after i installet GingerDx v23b please help how to fix it
xRecovery? No, you should install with CWM. Do this:
Install GingerDX
Make a full wipe
Flash the Alfs vold update (I think it's already included in GDX but anyway)
Flash the addon (adreno libs)
Wipe cache, dalvik-cache
Reboot.
Related
When I change my stock rom 2.1 to gingerdx v19 I use CWM to do this. To start out with I have version 4.0.1.5 of CWM but after installing gdx it gives me version 3.2. So GDX override my original CWM version. Is this normal? Can I prevent this kind of downgrade? SO where is my newer version - does it get wiped over?
It usually happens. Since Ginger dx has a preinstalled cwm. Gdx must have lower version
.IV got cwm that is your CURRENT version (3.). Hope you understand more bout it now. (We were all noobs at one stage )
Sent from my X8 using XDA App
hey i have the same problem....i used naA kemel which quotes it has cwm 5.x.x but when i installeed gdx v20 it opens up with cwm 3.2.x
i am all ears as to how we can correct this situation
I hate to have my CWM downgraded for no good reason
First install gingerDX then flash the alfs kernel v05 it over rides the stock kernel with a new one and it is including CWM 5.x.x
Hope i helped
Sent from my X8
so what you are saying is install the one with latest CWM last so it will override the previous, which brings to yet another question - is it OK to flash the rom first before the kernel? So you are suggestion this sequence:
flash stock rom-> unlock bootloader -> flash gingerdx -> flash custom kernel
Precisely like that
Sent from my X8
Hi, this is my first thread.
I tried to install GingerCruzt 8.4 on my X8 but failed. I am on stock 2.1 ROM which is rooted and xRecovery installed.
I don't understand where I was wrong.
1. Boot into recovery
2. Full wipe
3. Choose install custom zip
4. Again full wipe (also tried without this)
5. Reboot
6. Stuck at boot screen (picture with girl and title GingerCruzt) for looong time (15-20 mins)
Do I need to wait longer?
I also read many threads about this but didn't find solution.
Also tried to install FroyoBread 023b via xRecovery but same thing happend.
CWM Recovery came with FroyoBread and I tried to instal GingerDX 021 but no luck. Same problem.
What is the solution if it is solvable?
casper.link said:
Hi, this is my first thread.
I tried to install GingerCruzt 8.4 on my X8 but failed. I am on stock 2.1 ROM which is rooted and xRecovery installed.
I don't understand where I was wrong.
1. Boot into recovery
2. Full wipe
3. Choose install custom zip
4. Again full wipe (also tried without this)
5. Reboot
6. Stuck at boot screen (picture with girl and title GingerCruzt) for looong time (15-20 mins)
Do I need to wait longer?
I also read many threads about this but didn't find solution.
Also tried to install FroyoBread 023b via xRecovery but same thing happend.
CWM Recovery came with FroyoBread and I tried to instal GingerDX 021 but no luck. Same problem.
What is the solution if it is solvable?
Click to expand...
Click to collapse
Update your Kernel
Try full wipe !!
Ahmed Karim said:
Update your Kernel
Click to expand...
Click to collapse
I'd rather not unlocked bootloader.
@sidewalk_
Tried full wipe but did not help. Maybe I missed something?
But I think you must!
I also try to install FroyoBread and it stuck at boot screen. It does not need custom kernel. I think that I missed something, but what question is now?
casper.link said:
I also try to install FroyoBread and it stuck at boot screen. It does not need custom kernel. I think that I missed something, but what question is now?
Click to expand...
Click to collapse
do u have latest baseband and build id? try fullwipe,wipe cache,dalvik cache,wipe battery stats and try again,if problem still persists then flash to 2.1 again and root
YOU have the wrong Baseband you need x15
Thanks for help.
Tried everything that you wrote. Restore with PCC, full wipe, wipe dalvik, battery cache but nothing.
Baseband xxx015
Kernel 2.6.29
Build 2.1.1.A.0.6
Can be problem a busybox (1.17.2)? When I rooted phone I installed busybox by coping it to /system/bin without installing it via market (this tutorial youtube.com/watch?v=sJIU5qIdC-w). Same i did with chargemon and xrecovery. Now I find that busybox needs to be installed via market.
Is there a diference betwen chargemon in this tutorial above and that one in stock ROM.
Me again
I tried to repair with PCC, again.
Rooted with SuperOneClick folowing this tutorial (forum.xda-developers.com/showthread.php?t=1046605).
Rebooted.
Than I copied chargemon, busybox and xrecovery to /system/bin/
Rebooted.
Enter xRecovery.
Flashed GingerDX v013 via xRecovery
Rebooted
Enter CWM Recovery
Flashed GingerDX v021
Flashed Addons for stock kernel
Full wipe
Reboote
Stuck at GingerDX logo for 30 mins than I pulled batery out
Baseband xxx015
Kernel 2.6.29
Build 2.1.1.A.0.6
Also I tried to flash this (forum.xda-developers.com/showthread.php?t=1105745) via xRecovery and tried to install v021.
Btw, I tried to instal Floyo 1.0 but nothing.
I am out of ideas. Please help )
Solved. SD card was problem. Probably bad one.
wifi wont work, it turns on but no network is detected, i reflash kernel, rom, everything, no luck, change back to alfs and gingerdx, working back like charm, so its a problem with naa and minicm == help
Try full wiping the whole phone
that is in recovery
full wipe
wipe cache
wipe system
wipe dalvik cache
then flash kernel (try alfs v8 this tym)
then flash mini cm
tell me if it works
I previously had GingerDx V022 and it was working perfect.
Today I tried to Flash GingerDx V023 Using Xrecovery V0.1
I even initiated a full wipe and also wiped dalvik cache etc etc
But every time I flash , I get stuck at the SE Logo , unable to go back to xrecovery. Then I have to use PCC And re-root all over again.
I tried to find CWM V014 , although Xrecovery always worked for GingerDx (all previous versions)
But couldn't find it.
I havent even customized GingerDx V023. Just tried to directly flash it after downloading.
Doesnt work
What is going wrong ?
Help Please I really want to upgrade to this ROM
Xperia X8 E15i
GingerDx V022
Stock Kernel
it's same problems with me. Just waiting for helping by another peoples
Use ClockworkMod - it's absolutely necessary. You could use toolbox http://forum.xda-developers.com/showthread.php?t=1117100 to obtain double recovery. Then just tap the screen (dual recovery) or buck button to access CWM.
Mayank77 said:
I previously had GingerDx V022 and it was working perfect.
Today I tried to Flash GingerDx V023 Using Xrecovery V0.1
I even initiated a full wipe and also wiped dalvik cache etc etc
But every time I flash , I get stuck at the SE Logo , unable to go back to xrecovery. Then I have to use PCC And re-root all over again.
I tried to find CWM V014 , although Xrecovery always worked for GingerDx (all previous versions)
But couldn't find it.
I havent even customized GingerDx V023. Just tried to directly flash it after downloading.
Doesnt work
What is going wrong ?
Help Please I really want to upgrade to this ROM
Xperia X8 E15i
GingerDx V022
Stock Kernel
Click to expand...
Click to collapse
gingerdx v13 and above needs to be flashed with cwm
kirmada said:
gingerdx v13 and above needs to be flashed with cwm
Click to expand...
Click to collapse
I flashed GingerDx V020,V021,V022 All with XRecovery
And
Using
http://forum.xda-developers.com/show....php?t=1117100 did not work for me... I tried all combinations.
what is your kernel?
Did you flash the fixed version of v23 for stock kernel ?
kenel
install the update immediately after installation and check the'' rom addons for stock kernel''
reginned land
There is a version v023b.
Try this
same problem with v23a.
i have reflashed with version b and it works
(stock kernel)
Thanks to the developers it works
gingerdx 023b
I have problem with my auto rotation after I use the camera. Rest is perjust perfect.
Currently using v.022 (stock kernel)
has v023 fix this?
Hi all!
I got one X8. It has Floyo by Racht v.0.30 (Android 2.2.9), stock kernel 2.6.29 ([email protected] #1) and xrecovery mini-alpha.
I want to upgrade its ROM to GingerDX. I have read that GDX versions newer than 0.13 have to be installed with CWM.
I have read the forums across but no answer to this specific problem.
My question is: can I install x-parts and not brick the phone?
I do not know the exact version of xrecovery - it says just mini-alpha.
What is the safest way of upgrading to GDX on stock kernel and (rather old) xrecovery?
Thanks all!
--
Q
quazy99 said:
Hi all!
I got one X8. It has Floyo by Racht v.0.30 (Android 2.2.9), stock kernel 2.6.29 ([email protected] #1) and xrecovery mini-alpha.
I want to upgrade its ROM to GingerDX. I have read that GDX versions newer than 0.13 have to be installed with CWM.
I have read the forums across but no answer to this specific problem.
My question is: can I install x-parts and not brick the phone?
I do not know the exact version of xrecovery - it says just mini-alpha.
What is the safest way of upgrading to GDX on stock kernel and (rather old) xrecovery?
Thanks all!
--
Q
Click to expand...
Click to collapse
install CWM and flash GDX :good:
It would be best if you unlock your bootloader, flash Custom kernel with CWM preinstalled and then flash latest (or whatever) version of GDX
Godra said:
It would be best if you unlock your bootloader, flash Custom kernel with CWM preinstalled and then flash latest (or whatever) version of GDX
Click to expand...
Click to collapse
Is there a way without unlocking the bootloader?
This X8 is newer than 11w29!
Tnx
--
Q
quazy99 said:
Is there a way without unlocking the bootloader?
This X8 is newer than 11w29!
Tnx
--
Q
Click to expand...
Click to collapse
some older versions of gdx can be flashed by xrecov, and they also have cwm. or you can use x8toolbox to install cwm on your device.
Sent from my rooted tomato using tapatalk
Here is how I did it:
1. Downloaded CWM-recovery-4.0.1.5-e15-Amend.zip to SD card
2. Rebooted to xrecovery
3. Install custom zip and chose CWM-recovery-4.0.1.5-e15-Amend.zip
4. Rebooted - Floyo was unusable
5. Downloaded GingerDX 029
6. Rebooted to CWM
7. Cleared cache, dalvik and battery cache
8. Installed GDX custom zip
Works nice!
--
Q