Related
Help me please
I have a Brick Xperia X8, my Xperia Stuck on "Sony Ericsson" after I turn on my device. my Xperia has been rooted for GingerDX (actually i already try gingercruzz, froyobread, etc) and my xperia stuck in "Sony Ericsson" after I do full wipe and format system(because i already done many install and uninstall application). T T
if I charge my xperia through original charger, it only stuck on "Sony Ericsson" and the LED not flame.
I have tried using SEUS, PCC and Flashtool, but my Xperia cannot response while connecting usb cable and press back button. the program keep requesting for connecting usb cable and press back button. but the LED green is on
The Big Problem is " My Xperia won't response after the program request for connecting usb cable and press back button" that command always like that, even I connect usb cable to my phone and press back button. either in SEUS, PCC, Flashtool even in S1toll
I have tried to use Reelock bootloader(S1tool), but my xperia could not response too. either I click Identity, Flash or Restore. I have tried Gordon's Gate to reset my usb port, but my computer always hang when I connected USB cable and press back button.
Please, what can I do to save my Xperia X8...
my phone already bricked for 2 weeks, and I read many forum from XDA, Android-indonesia, kaskus, and many of bloggers but not worked for my Xperia
Help me Please...
r_win said:
Help me please
I have a Brick Xperia X8, my Xperia Stuck on "Sony Ericsson" after I turn on my device. my Xperia has been rooted for GingerDX (actually i already try gingercruzz, froyobread, etc) and my xperia stuck in "Sony Ericsson" after I do full wipe and format system(because i already done many install and uninstall application). T T
if I charge my xperia through original charger, it only stuck on "Sony Ericsson" and the LED not flame.
I have tried using SEUS, PCC and Flashtool, but my Xperia cannot response while connecting usb cable and press back button. the program keep requesting for connecting usb cable and press back button. but the LED green is on
The Big Problem is " My Xperia won't response after the program request for connecting usb cable and press back button" that command always like that, even I connect usb cable to my phone and press back button. either in SEUS, PCC, Flashtool even in S1toll
I have tried to use Reelock bootloader(S1tool), but my xperia could not response too. either I click Identity, Flash or Restore. I have tried Gordon's Gate to reset my usb port, but my computer always hang when I connected USB cable and press back button.
Please, what can I do to save my Xperia X8...
my phone already bricked for 2 weeks, and I read many forum from XDA, Android-indonesia, kaskus, and many of bloggers but not worked for my Xperia
Help me Please...
Click to expand...
Click to collapse
okay...
if you're still confuse, downgrade your phone!
its last option
downgrade into 2.1 - download this file from files crop X8 E15i 2.1.1.C.0.0._un.ftf
root your phone by flash tool..
then install xrecovery by clicking cross icon on flashtool
OR
download this file (password=cintaindonesia) and extract in your SDcard
after that copy paste three files(busybox, chargemon, xrecovery.tar) in system\bin
and you will get xrecovery
after that
unlock bootloader using flashtool OR s1tool
Flash the latest ICS kernel
backup
factory reset, wipe data, etc
Flash ROM
done!
here my Video tutorial..but I'm sorry cz I made it with Indonesian language
http://www.youtube.com/watch?v=SIIG6...&feature=g-upl
My mobile has a same problem.
Follow this link and do it..Don't panic..
http://mkasharingiscaring.blogspot.in/2011/11/guide-how-to-unbrick-xperia-x8-d.html
If i helped you please press thanks button..........
He said his x8 can't go to flash mode the flashtools can't detect his x8...
By the walking Walkman...
Opening multiple threads and asking the same question everywhere is not allowed.
Since he asked this question in the correct thread too, this one is closed
this the problem with my xperia x8:
Help me please
I have a Brick Xperia X8, my Xperia Stuck on "Sony Ericsson" after I turn on my device. my Xperia has been rooted for GingerDX . i was already using GINGERDX V22. but when i tried to install GINGERDX V28 it got screwed up :crying: and my xperia stuck in "Sony Ericsson" after I do full wipe and format system(because i already done many install and uninstall application).
if I charge my xperia through original charger, it only stuck on "Sony Ericsson" and the LED not flame.
I have tried using SEUS, PCC and Flashtool, but my Xperia cannot response while connecting usb cable and press back button. the program keep requesting for connecting usb cable and press back button. but the LED green is on
The Big Problem is " My Xperia won't response after the program request for connecting usb cable and press back button" that command always like that, even I connect usb cable to my phone and press back button. either in SEUS, PCC, Flashtool even in S1toll.i have tried mutiple install/uninstall of USB drivers....nothing works.tried in both windows XP and Windows 7.i cant think my day without my x8
I have tried to use Reelock bootloader(S1tool), but my xperia could not response too. either I click Identity, Flash or Restore. I have tried Gordon's Gate to reset my usb port, but my computer always hang when I connected USB cable and press back button.
Please, what can I do to save my Xperia X8......when i'm connecting my x8 to pc via USB the green light is on. so i hope x8 is not fully dead:angel::angel:.
one more imp note i must mention: when i m connecting my phone in flash mode(i.e turn off x8...hold back button and plug in usb) phone is not detected....but strangely...when my x8 is stuck at 'sony ericssion' at dat time if i m connecting my phone to pc PCC pops up with message'x8 connected' but nothing happens after that...plz plzz plzz save my phone!!!!!!!this is my very first post in XDA:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
Help me Please...
stardd500 said:
this the problem with my xperia x8:
Help me please
I have a Brick Xperia X8, my Xperia Stuck on "Sony Ericsson" after I turn on my device. my Xperia has been rooted for GingerDX . i was already using GINGERDX V22. but when i tried to install GINGERDX V28 it got screwed up :crying: and my xperia stuck in "Sony Ericsson" after I do full wipe and format system(because i already done many install and uninstall application).
if I charge my xperia through original charger, it only stuck on "Sony Ericsson" and the LED not flame.
I have tried using SEUS, PCC and Flashtool, but my Xperia cannot response while connecting usb cable and press back button. the program keep requesting for connecting usb cable and press back button. but the LED green is on
The Big Problem is " My Xperia won't response after the program request for connecting usb cable and press back button" that command always like that, even I connect usb cable to my phone and press back button. either in SEUS, PCC, Flashtool even in S1toll.i have tried mutiple install/uninstall of USB drivers....nothing works.tried in both windows XP and Windows 7.i cant think my day without my x8
I have tried to use Reelock bootloader(S1tool), but my xperia could not response too. either I click Identity, Flash or Restore. I have tried Gordon's Gate to reset my usb port, but my computer always hang when I connected USB cable and press back button.
Please, what can I do to save my Xperia X8......when i'm connecting my x8 to pc via USB the green light is on. so i hope x8 is not fully dead:angel::angel:.
one more imp note i must mention: when i m connecting my phone in flash mode(i.e turn off x8...hold back button and plug in usb) phone is not detected....but strangely...when my x8 is stuck at 'sony ericssion' at dat time if i m connecting my phone to pc PCC pops up with message'x8 connected' but nothing happens after that...plz plzz plzz save my phone!!!!!!!this is my very first post in XDA:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
Help me Please...
Click to expand...
Click to collapse
some body please reply!!!!!!:crying:
Re-install the Rom and fullwipe.....and henceforth please dont format the system.
Hope i helped
athulele said:
Re-install the Rom and fullwipe.....and henceforth please dont format the system.
Hope i helped
Click to expand...
Click to collapse
not able to reinstall and full wipe
its not going to CWM or XRECOVERY...USB also not detecting in FLASH mode
I think you almost done everything EXCEPT changing your USB cable. Just give a try with replacing the USB cable.
mahesh1495 said:
I think you almost done everything EXCEPT changing your USB cable. Just give a try with replacing the USB cable.
Click to expand...
Click to collapse
bought dis cable just 3 months back.....and it was working fine till my X8 got bricked!!!!!!!!come on ...plz help
maybe you made your problem worst by locking bootloader etc. you have hard bricked it because you did so many things but seus?? did you try?
Use flashtool
Sent from my E15i using xda app-developers app
ngoralph said:
maybe you made your problem worst by locking bootloader etc. you have hard bricked it because you did so many things but seus?? did you try?
Click to expand...
Click to collapse
triwd SEUS,PCC,FLASHTOOL,S1tool.......none of these detects my phone
but does charging charge your phone?
Lukenda said:
Use flashtool
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
flash tool is not detecting my x8...some issue with the driver..i tried installing/uninstalling drivers in pc...tried Gordon Gate drivers...nothing works....x8 still un detected...plz..read my forst post for more details.....i m very hopeful to get help from senior members here...plz:cyclops::cyclops:
Did you follow the step properly when using flashtool? i assume that you x8 isn't hardbricked because you can boot into se screen.
Send from my E15i using xda premium.
Press thanks if helped
*Xperia X8 Black @ ICS miniCM9 3.0.3 on nAa ICS 04 kernel *
Thank you very much nAa!
stardd500 said:
flash tool is not detecting my x8...some issue with the driver..i tried installing/uninstalling drivers in pc...tried Gordon Gate drivers...nothing works....x8 still un detected...plz..read my forst post for more details.....i m very hopeful to get help from senior members here...plz:cyclops::cyclops:
Click to expand...
Click to collapse
Did you try gordon gate in flashtool folder?
Send from my E15i using xda premium.
Press thanks if helped
*Xperia X8 Black @ ICS miniCM9 3.0.3 on nAa ICS 04 kernel *
Thank you very much nAa!
zlewe said:
Did you follow the step properly when using flashtool? i assume that you x8 isn't hardbricked because you can boot into se screen.
Send from my E15i using xda premium.
Press thanks if helped
*Xperia X8 Black @ ICS miniCM9 3.0.3 on nAa ICS 04 kernel *
Thank you very much nAa!
Click to expand...
Click to collapse
yes....followed every step properly....only issue x8 not detected while connecting the usb +holding back button. but green light id on at this time.
one more thing,....when i m chargiing my phone no green light is on and screen is stuck to Sony Ericssion screen.
try using flash tool again when it asked you to remove plug and replug it remove your battery and put it back way for 5 sec before plugging phone to pc check if led is there if not.....
stardd500 said:
yes....followed every step properly....only issue x8 not detected while connecting the usb +holding back button. but green light id on at this time.
one more thing,....when i m chargiing my phone no green light is on and screen is stuck to Sony Ericssion screen.
Click to expand...
Click to collapse
Is something showed on device manager when you try to connect in flashmode?
Maybe the problem its driver related. Also to make sure is not, try flashmode in another computer.
Sent from my GT-I9300 using xda premium
Alejandrissimo said:
Is something showed on device manager when you try to connect in flashmode?
Maybe the problem its driver related. Also to make sure is not, try flashmode in another computer.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
see the attachement from Devive manager win 7....
and i have used installing/uninstalling drivers + used gorndon gate driver also...but no good....any idea??
ngoralph said:
try using flash tool again when it asked you to remove plug and replug it remove your battery and put it back way for 5 sec before plugging phone to pc check if led is there if not.....
Click to expand...
Click to collapse
flash tool is not asking me to reconnect the x8 its showing the same damn plug in animation...but i tried disconnecting and reconnecting my phone while flash tool is on.....see the error message attached
You have PCC installed while using flashtool? And put flashtool in c:.
Sent from my X8 using xda premium
yeah dats what i mean. when the message shows up remove the battery and plug it in again make sure it is not turned on
Sent from my E15i using xda premium
When i'm trying to root my Xperia Z, i met i big problem.
i got a loop from flashing Z_DooMLoRD_insecure_FW-350.img, and i can't back to fastboot mode anymore
i disconnect and hold power+volume up button for 15sec, i connect back the phone
it still loop!!!
what can i do now?! Plz help me
RaymondCh said:
When i'm trying to root my Xperia Z, i met i big problem.
i got a loop from flashing Z_DooMLoRD_insecure_FW-350.img, and i can't back to fastboot mode anymore
i disconnect and hold power+volume up button for 15sec, i connect back the phone
it still loop!!!
what can i do now?! Plz help me
Click to expand...
Click to collapse
If you created a backup which you should have, just restore it.
soccerfan6789 said:
If you created a backup which you should have, just restore it.
Click to expand...
Click to collapse
what can i use to restore??flashtool??
i'm stucking in a boot loop....i can't go anywhere
RaymondCh said:
When i'm trying to root my Xperia Z, i met i big problem.
i got a loop from flashing Z_DooMLoRD_insecure_FW-350.img, and i can't back to fastboot mode anymore
i disconnect and hold power+volume up button for 15sec, i connect back the phone
it still loop!!!
what can i do now?! Plz help me
Click to expand...
Click to collapse
Try using flashtool to flash the original firmware.
Check if holding the vol - works.
If it does. Then you dont have to worry. Your device will be fine.
Press thnx if I helped.
Sent from my ST18i
skb6T9 said:
Try using flashtool to flash the original firmware.
Check if holding the vol - works.
If it does. Then you dont have to worry. Your device will be fine.
Press thnx if I helped.
Sent from my ST18i
Click to expand...
Click to collapse
can i wait until its battery gone??
i don't know where i can find the stock Xperia Z rom
:crying:
RaymondCh said:
can i wait until its battery gone??
i don't know where i can find the stock Xperia Z rom
:crying:
Click to expand...
Click to collapse
Try googling for the .ftf file for your Xperia Z. Then you can flash the firmware with flashtool & I think.u should do it before your battery is gone...
Cause after flashing ftf it takes almost 3-4 minutes to boot.
Press thnx if I helped.
Sent from my ST18i
skb6T9 said:
Try googling for the .ftf file for your Xperia Z. Then you can flash the firmware with flashtool & I think.u should do it before your battery is gone...
Cause after flashing ftf it takes almost 3-4 minutes to boot.
Press thnx if I helped.
Sent from my ST18i
Click to expand...
Click to collapse
thx for help ~any problem i will share later
Sorry
is it normal that flashing .ftf over 30mins???
No...
It's abnormal. Your flashing I takin more than 30 minutes???:what:
Sent from my ST18i
Hey Ray, can you share with me how you do it?
Step-by-step instructions will help greatly.
If mine works, I will be eternally grateful!!!
zorro18888 said:
Hey Ray, can you share with me how you do it?
Step-by-step instructions will help greatly.
If mine works, I will be eternally grateful!!!
Click to expand...
Click to collapse
1st download & install flashtool.
2nd install the drivers for your device including the fastboot & flashmode drivers.
(they are in the flashtool/drivers folder)
3rd download the ftf file for your device & place that file in flashtool/firmware folder
4th open flashtool select "thunder" icon then select flashmode.
5th select your firmware from the list.
6th when asked connect your device in flasmode.( power off your phone then connect your device holding vol '-' button. Green led should show up.)
7th after flashing is done reboot your phone.
All done.
Press thnx if I helped.
Sent from my ST18i
zorro18888 said:
Hey Ray, can you share with me how you do it?
Step-by-step instructions will help greatly.
If mine works, I will be eternally grateful!!!
Click to expand...
Click to collapse
Sure~
i was following the step that found in XDA
HTML:
http://forum.xda-developers.com/showthread.php?t=2154310
the files you can download inside.BUT something you should be aware~
1.this two file (Z_DooMLoRD_CF-Auto-Root-ported_FW-350.img and Z_DooMLoRD_insecure_FW-350.img)
should put it in the same of adb.exe file (c:\xxx\sdk\platform-tools\)
2.IF you don't know how to connect devices in fastboot mode in step 6 (following by the website i gave)
you should wait after flashing CF-Auto-root and reboot about once , plugin your usb and press VOLUME UP key TOGETHER
in that time ,you should see a blue led light on your devices.
I'd try that just disconnect and hard power off ,and plugin usb normally ,you will be fail to enter fastboot mode.
So my solution of solving boot loop after flashing CF-auto-root ,is PRESS and HOLD VOLUME UP key WHILE plugin your usb.
i did a big and long time reseach that teaching how to root xperia z ,all haven't point out that the method of entering fastboot mode
maybe they use another way to enter anyway my devices is running normal now and rooted
Hope these can help you :laugh: and
sorry of my bad english~
skb6T9 said:
1st download & install flashtool.
2nd install the drivers for your device including the fastboot & flashmode drivers.
(they are in the flashtool/drivers folder)
3rd download the ftf file for your device & place that file in flashtool/firmware folder
4th open flashtool select "thunder" icon then select flashmode.
5th select your firmware from the list.
6th when asked connect your device in flasmode.( power off your phone then connect your device holding vol '-' button. Green led should show up.)
7th after flashing is done reboot your phone.
All done.
Press thnx if I helped.
Sent from my ST18i
Click to expand...
Click to collapse
At 6th, my phone has no Green Led.....
---------- Post added at 10:50 AM ---------- Previous post was at 10:35 AM ----------
Thanks. I will try again later.
Anyway, I am running on Windows 8 and I'm not sure if it could be one of the issues I've faced.
I installed both the Flashtool abd Fastboot drivers and it was ok except for the Google driver which it said was not installed.
I checked the Adroid SDK by running the SDK pgm and it tells me I have Google Drivers (version 7) already installed.
So it should be ok, rite??
RaymondCh said:
Sure~
i was following the step that found in XDA
HTML:
http://forum.xda-developers.com/showthread.php?t=2154310
the files you can download inside.BUT something you should be aware~
1.this two file (Z_DooMLoRD_CF-Auto-Root-ported_FW-350.img and Z_DooMLoRD_insecure_FW-350.img)
should put it in the same of adb.exe file (c:\xxx\sdk\platform-tools\)
2.IF you don't know how to connect devices in fastboot mode in step 6 (following by the website i gave)
you should wait after flashing CF-Auto-root and reboot about once , plugin your usb and press VOLUME UP key TOGETHER
in that time ,you should see a blue led light on your devices.
I'd try that just disconnect and hard power off ,and plugin usb normally ,you will be fail to enter fastboot mode.
So my solution of solving boot loop after flashing CF-auto-root ,is PRESS and HOLD VOLUME UP key WHILE plugin your usb.
i did a big and long time reseach that teaching how to root xperia z ,all haven't point out that the method of entering fastboot mode
maybe they use another way to enter anyway my devices is running normal now and rooted
Hope these can help you :laugh: and
sorry of my bad english~
Click to expand...
Click to collapse
zorro18888 said:
So it should be ok, rite??
Click to expand...
Click to collapse
Yeah I think so...
Not so experienced in Windows8.
Sent from my ST18i
The problem I am having now is when in bootloader mode (Blue LED), I run fastboot and enter the command:
fastboot flash boot Z_DooMLoRD_CF-Auto-Root-ported_FW-350.img
then it says <waiting for device> and just stops there.....
I cannot proceed further....
zorro18888 said:
The problem I am having now is when in bootloader mode (Blue LED), I run fastboot and enter the command:
fastboot flash boot Z_DooMLoRD_CF-Auto-Root-ported_FW-350.img
then it says <waiting for device> and just stops there.....
I cannot proceed further....
Click to expand...
Click to collapse
Then your drivers are not installed correctly..
Sent from my ST18i
Not sure if I'll help, but I got a similar problem with my Nexus 7 drivers on windows 8 and all the flashing processes would hang on <wating for device>, I then reinstalled the drivers using the method on this site: http://dhakshinamoorthy.wordpress.com/2012/05/14/installing-an-unsigned-driver-in-windows-8-x64/
Good luck
mmisep said:
Not sure if I'll help, but I got a similar problem with my Nexus 7 drivers on windows 8 and all the flashing processes would hang on <wating for device>, I then reinstalled the drivers using the method on this site: http://dhakshinamoorthy.wordpress.com/2012/05/14/installing-an-unsigned-driver-in-windows-8-x64/
Good luck
Click to expand...
Click to collapse
Tried but still cant detect my phone......it just stays at BLUE LED (volume up) and PC still cant detect phone.
When I pressed volume down, there is no light.
When I press the power button, it starts to boot-loop
Btw, which drivers are you using and where did you guys get your drivers from?
I am downloaded the Android SDK drivers with Google USB drivers Rev 7.
zorro18888 said:
Tried but still cant detect my phone......it just stays at BLUE LED (volume up) and PC still cant detect phone.
When I pressed volume down, there is no light.
When I press the power button, it starts to boot-loop
Btw, which drivers are you using and where did you guys get your drivers from?
I am downloaded the Android SDK drivers with Google USB drivers Rev 7.
Click to expand...
Click to collapse
I got my drivers from flashtool & pc companion.
Sent from my ST18i
skb6T9 said:
I got my drivers from flashtool & pc companion.
Sent from my ST18i
Click to expand...
Click to collapse
Do you need to install 2 sets of drivers from flashtool and pc companion?
I am having problem with unlocking bootloader on my Sony Xperia SP c5303 12.0.A.1.257. Tryin to do this in Flashtool:
I Click on BLU button, following steps and then i am asked to unplug the device and restart it in fastbootmode. If i understood it right, i have to hold vol+ and connect USB, but then error appears (asking me for drivers). But there is no drivers for SP in Flashtool-drivers.exe. I dont know what to do.
Bro first download android sdk and installed it... And u have to install flashtool -drivers.. Check all the boxes and install it.. I know sp is not there.. Not a problem.. Dont forget about android sdk
From Xperia SP 4G By a Big NooB
Shore13 said:
I am having problem with unlocking bootloader on my Sony Xperia SP c5303 12.0.A.1.257. Tryin to do this in Flashtool:
I Click on BLU button, following steps and then i am asked to unplug the device and restart it in fastbootmode. If i understood it right, i have to hold vol+ and connect USB, but then error appears (asking me for drivers). But there is no drivers for SP in Flashtool-drivers.exe. I dont know what to do.
Click to expand...
Click to collapse
Install the z driver it will work with sp got flashtool folder where u have installed it and navigate to drivers folder there run the exe and check the boxes with z drivers.it will work unless u are on windows 8..
thanks guys, had problems with installing drivers, tried to run Flashtool without it, but then started flashtool-drivers at Compatibility with vista, and now everything is allright)
Shore13 said:
thanks guys, had problems with installing drivers, tried to run Flashtool without it, but then started flashtool-drivers at Compatibility with vista, and now everything is allright)
Click to expand...
Click to collapse
Glad that ur problem is over. Enjoy the great SP.. We r here to help u...
From Xperia SP 4G By a Big NooB
I am in an awkward situation.
xperia z, 4.2.2 244 rooted stock rom, bootloader locked, usb debug mode off, recovery not installed.
I accidentally corrupted build.prop and the phone bricked.
I cannot use flashtool to flash the stock rom back because usb debug mode is off.
I cannot use Sony update service Pro to force update because it said that "your phone already has the latest available software installed".
I cannot use PC Companion to repair because the software said that "Sony update engine doesn't have software available for your phone".
Please help.
wmiswm said:
I am in an awkward situation.
xperia z, 4.2.2 244 rooted stock rom, bootloader locked, usb debug mode off, recovery not installed.
I accidentally disrupted build.prop and the phone bricked.
I cannot use flashtool to flash the stock rom back because usb debug mode is off.
I cannot use Sony update service Pro to force update because it said that "your phone already has the latest available software installed".
I cannot use PC Companion to repair because the software said that "Sony update engine doesn't have software available for your phone".
Please help.
Click to expand...
Click to collapse
Use PC companion but try use repair phone not update. Wait till all phone model showing up than choose your model phone. btw, your phone must off.
than follow instruction there... wil take 1～2 hour for repair.
Hope you can solve your problem. ill take screen shoot when im home later than post here..
Sent from my C6602 using xda premium
YudiA1 said:
Use PC companion but try use repair phone not update. Wait till all phone model showing up than choose your model phone. btw, your phone must off.
than follow instruction there... wil take 1～2 hour for repair.
Hope you can solve your problem. ill take screen shoot when im home later than post here..
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Thank you very much for your reply. But I am already using the PC Companion repair option, and the response is as stated above.
flashtool is all what you need,read the instructions
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Reply
wmiswm said:
I cannot use flashtool to flash the stock rom back because usb debug mode is off
Click to expand...
Click to collapse
You can use Flashtool to flash stock rom, doesn't matter if usb debug mode is on or off (only needed to install recovery or to root)
Download stock rom, install flashtool + drivers and follow screen instructions.. Good Luck! :good:
J have the same problem, yesterday j installed cyanogenmod, now xperia Z was on SONY logo and j can't flash original firmware on flashtool, j can only flash original kernel, but is still on sony logo
SUS says that hasn't new firmware for my phone.
What can j do ????
Thanks in advance
gm007 said:
flashtool is all what you need,read the instructions
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
many thanks, done.
shysparrow said:
You can use Flashtool to flash stock rom, doesn't matter if usb debug mode is on or off (only needed to install recovery or to root)
Download stock rom, install flashtool + drivers and follow screen instructions.. Good Luck! :good:
Click to expand...
Click to collapse
yes, you are right. Yesterday I check everything on the right panel and it does not work. Today I leave all option unchecked and flash properly. Many thanks anyway.
maxam73 said:
J have the same problem, yesterday j installed cyanogenmod, now xperia Z was on SONY logo and j can't flash original firmware on flashtool, j can only flash original kernel, but is still on sony logo
SUS says that hasn't new firmware for my phone.
What can j do ????
Thanks in advance
Click to expand...
Click to collapse
Just follow the flashtool instruction and re-flash the stock rom first, everything will return to unroot stated. Reroot then and try again.
wmiswm said:
Just follow the flashtool instruction and re-flash the stock rom first, everything will return to unroot stated. Reroot then and try again.
Click to expand...
Click to collapse
Maybe j have other kind of problem, j tried with flashtool but it doesn't start flashing when in flashmode, after a minute phone boots itself continuosly on sony logo.
j tried several times with different PC and different ftf file.
j hope to solve this problem, but how...
maxam73 said:
Maybe j have other kind of problem, j tried with flashtool but it doesn't start flashing when in flashmode, after a minute phone boots itself continuosly on sony logo.
j tried several times with different PC and different ftf file.
j hope to solve this problem, but how...
Click to expand...
Click to collapse
Try this way bro.. Done in many Xperia here..
Solving Bootloop phone/Flash Tool can't Detect your phone.
Your Phone Must Off!! and not connected !!
1. Open Pc Companion
2. Click update on Red ellipse (in Picture 1)
3. Start on Phone/tablet Update (in Picture 2)
4. Click Repair on Next Screen
5. in Next Screen, Read that warning Click Continue if you OK
6. Next Step click on Red Circle than Next...
7. Wait initializing Software (10~30 mnt) or depend your ISP speed
8. After initializin9 All Xperia Phone List Will Show Up.
Choose What Xperia Phone Will you repair ( I choose XZ) than Next..
9. Follow instruction On picture.
( Connect USB on your Phone while Press Vol down )
10. if not Start.. Unplug usb and try plug again ==> same no 9)
11. After start.. Waiting 1~2 Hours till done.
(Read Warning There )
Sent from my C6602 using xda premium
YudiA1 said:
Try this way bro.. Done in many Xperia here..
Solving Bootloop phone/Flash Tool can't Detect your phone.
Your Phone Must Off!! and not connected !!
1. Open Pc Companion
2. Click update on Red ellipse (in Picture 1)
3. Start on Phone/tablet Update (in Picture 2)
4. Click Repair on Next Screen
5. in Next Screen, Read that warning Click Continue if you OK
6. Next Step click on Red Circle than Next...
7. Wait initializing Software (10~30 mnt) or depend your ISP speed
8. After initializin9 All Xperia Phone List Will Show Up.
Choose What Xperia Phone Will you repair ( I choose XZ) than Next..
9. Follow instruction On picture.
( Connect USB on your Phone while Press Vol down )
10. if not Start.. Unplug usb and try plug again ==> same no 9)
11. After start.. Waiting 1~2 Hours till done.
(Read Warning There )
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Solved...j know that phones must be off, the problem was flashtool, j used other version (beta 4) on other pc running xp instead of win7 and all goes good.
Thanks to all for helping me
Doesnt work.
I cant use flashtool, period.
Are there anyother methods?
theVenerable said:
Doesnt work.
I cant use flashtool, period.
Are there anyother methods?
Click to expand...
Click to collapse
The above didn't work for me because I received error based on my type of phone.
This guide however did help: http://forum.xda-developers.com/showthread.php?t=2240614
I had to reboot windows to a settings to enable unsigned drivers. Installed Flashtool and it's drivers,
First unlocked the bootloader(BLU button, got the IMEI, used the sony form (http://unlockbootloader.sonymobile.com/instructions))
Then I downloaded the stock sony xperia z ftf image, placed it in Flashtool's firmware folder, then flashed it (flash device > flash mode).
Now my phone's working again.
HTH,
George
brick,unbrick,xperia z problem,flashtool
My OS phone in recovery mode (root) got deleted And when I turn on phone stuck on Sony logo And when it is connected to the computer showing error your USB not recognized and Flash mode for use Flashtool doesn't work and the same error shows what should i do?
shayanster said:
My OS phone in recovery mode (root) got deleted And when I turn on phone stuck on Sony logo And when it is connected to the computer showing error your USB not recognized and Flash mode for use Flashtool doesn't work and the same error shows what should i do?
Click to expand...
Click to collapse
If you still can enter custom recovery, you only need flash rom and (with) suitable kernel.
If not, you need Flashtool.
- make sure you have the newest version of flashtool and driver
- connect your phone to pc.
- when computer show error about usb not recognized, go to computer management - device manager. Find something in universal serial bus controller list that have yellow triangle and exclamation mark. right click and remove it
- disconnect your phone then reboot your pc
- install flashtool and driver, reboot pc again
- connect your phone to pc. Now, it should detect your phone.
- do flashing procedure
cmiiw
visualfighter said:
If you still can enter custom recovery, you only need flash rom and (with) suitable kernel.
If not, you need Flashtool.
- make sure you have the newest version of flashtool and driver
- connect your phone to pc.
- when computer show error about usb not recognized, go to computer management - device manager. Find something in universal serial bus controller list that have yellow triangle and exclamation mark. right click and remove it
- disconnect your phone then reboot your pc
- install flashtool and driver, reboot pc again
- connect your phone to pc. Now, it should detect your phone.
- do flashing procedure
cmiiw
Click to expand...
Click to collapse
Thanks for the answer I tried all ways but the problem is not solved .I think the only solution is JTAG box
shayanster said:
Thanks for the answer I tried all ways but the problem is not solved .I think the only solution is JTAG box
Click to expand...
Click to collapse
To use Flashtool put phone in flashmode, it will not work in recovery mode
To put phone in flashmode
Hold power + both volume keys
wait till you feel three vibrations.
Make sure you have installed Z drivers flashmode drivers & fastboot drivers(Setup fille is in driver folder of flashtool)
Keep FTF file in firmware folder of flashtool
Start flashtool
Click the thunder button
select flashmode
select the FTF file
When it tells you to connect phone
Hold volume down key and connect USB it should start flashing
androidtweaker1 said:
To use Flashtool put phone in flashmode, it will not work in recovery mode
To put phone in flashmode
Hold power + both volume keys
wait till you feel three vibrations.
Make sure you have installed Z drivers flashmode drivers & fastboot drivers(Setup fille is in driver folder of flashtool)
Keep FTF file in firmware folder of flashtool
Start flashtool
Click the thunder button
select flashmode
select the FTF file
When it tells you to connect phone
Hold volume down key and connect USB it should start flashing
Click to expand...
Click to collapse
when it is connected into flashmode the computer showing error your USB not recognized
shayanster said:
when it is connected into flashmode the computer showing error your USB not recognized
Click to expand...
Click to collapse
Is it Windows 7 or 8?