Related
Pardon by the one of before I do not speak English.
Hello to all.
My problem is the following one:
I yesterday made Overclock with terminal emulator and all correct one. I put that the Overclock remembered and here I made it bad, because I remained without battery and when arriving at to house I put it to load I ignited, it and nothing, I had left pillaged. I did recovery with wipes, I returned to install everything I tried and it again but no longer there was way to obtain it. With terminal emulator I have left myself pillaged when I have introduced the frequency and tlf does a reseteo to me but without going out. if I return it to try I must clear the battery because I have left myself colgadísimo. If I do with 0.5.6beta Nova app I pass the same to me has left myself pillaged at the end of doing overclock.
Somebody knows why happens this to me?
Will have been created some file that it must erase?
Some solution?
Thank you very much, I wait for your answers. A greeting.
Spanish
Hola a todos.
Mi problema es el siguiente:
Ayer hice Overclock con terminal emulator y todo correcto.
Puse que me recordase el Overclock y aquí la cagué, porque me quedé sin batería y al llegar a casa lo puse a cargar, lo encendí y nada, se me quedaba pillado.
Hice recovery con los wipes, volví a instalar todo y lo intenté de nuevo pero ya no había manera de conseguirlo.
Con terminal emulator se me queda pillado cuando he introducido la frecuencia y el tlf me hace un reseteo pero sin apagarse. si lo vuelvo a intentar tengo que quitar la batería porque se me queda colgadísimo.
Si lo hago con Nova app 0.5.6beta me pasa lo mismo se me queda pillado al final de hacer overclock.
¿Alguién sabe por qué me ocurre ésto?
¿Se habrá creado algún archivo que tenga que borrar?
¿Alguna solución?
Muchas gracias, espero vuestras respuestas.
Un saludo.
Excuse me, but your English language is less understandable for me...
Perhaps other 43 views of this thread doesn't understand either, so no reply yet..
CMIIW
It seems to be a translation, no ?
What's the original language ?
Because neither I understand your post.
Sent from my LG-P970 using xda premium
Sobralobo said:
It seems to be a translation, no ?
What's the original language ?
Because neither I understand your post.
Click to expand...
Click to collapse
I think it's translation. If you understand, perhaps you can give solution of those problem?
redy2006 said:
Excuse me, but your English language is less understandable for me...
Perhaps other 43 views of this thread doesn't understand either, so no reply yet..
CMIIW
Click to expand...
Click to collapse
or the text is corrected or that I create.
pelucaslee said:
or the text is corrected or that I create.
Click to expand...
Click to collapse
Well, it seems I (or someone who read this thread) still don't understand your 'edited' question... I am sorry...
What is your language? Perhaps you can also write it with your own language (add your original language below your question), so other's who had same language can understand and help.
CMIIW.
redy2006 said:
Well, it seems I (or someone who read this thread) still don't understand your 'edited' question... I am sorry...
What is your language? Perhaps you can also write it with your own language (add your original language below your question), so other's who had same language can understand and help.
CMIIW.
Click to expand...
Click to collapse
Ok, posted, thanks
from what I can make out of it, it's a portugese or spanish lang (he just posted it lol)...I think he's trying to say that he overclocked his phone making it unstable (if im not wrong) and he's saying it's like a brick now and wont turn on even with plugging it in and asking if he tinkered with the wrong file or somthing?
In order to repair a faulty overclock, you have to wipe /data only, and then reflash.
When you wipe all and then reflash everything... It continues failing?
---
Para solventar un problema de overclock fallido, basta con hace un wipe de /data y luego hacer un reflash. De todas formas, teniendo en cuenta que la Nova v8 solo la hay en versión wipe, no te queda otra que reflashear todo.
Cuando haces todos los wipes y reflasheas la nova 8... continua fallando el overclock? Detallame qué wipes haces, porque debería estar todo ok.
More text in spanish than in english? It's easier to me...
Huexxx said:
In order to repair a faulty overclock, you have to wipe /data only, and then reflash.
When you wipe all and then reflash everything... It continues failing?
---
Para solventar un problema de overclock fallido, basta con hace un wipe de /data y luego hacer un reflash. De todas formas, teniendo en cuenta que la Nova v8 solo la hay en versión wipe, no te queda otra que reflashear todo.
Cuando haces todos los wipes y reflasheas la nova 8... continua fallando el overclock? Detallame qué wipes haces, porque debería estar todo ok.
More text in spanish than in english? It's easier to me...
Click to expand...
Click to collapse
Yes, I think that he only made wipe, and not flashing.
you can try to make wipe and reflash again.
Huexxx said:
In order to repair a faulty overclock, you have to wipe /data only, and then reflash.
When you wipe all and then reflash everything... It continues failing?
hago el overclock con terminal y pongo 1,1 pero se cuelga
---
Para solventar un problema de overclock fallido, basta con hace un wipe de /data y luego hacer un reflash. De todas formas, teniendo en cuenta que la Nova v8 solo la hay en versión wipe, no te queda otra que reflashear todo.
Cuando haces todos los wipes y reflasheas la nova 8... continua fallando el overclock? Detallame qué wipes haces, porque debería estar todo ok.
More text in spanish than in english? It's easier to me...
Click to expand...
Click to collapse
Sent from my LG-P970 using XDA App
hago el overclock con terminal emulator. 1,1 hago los ajustes y se me cuelga.
pelucaslee said:
hago el overclock con terminal emulator. 1,1 hago los ajustes y se me cuelga.
Click to expand...
Click to collapse
Have you wiped all and reflashed?
¿Has hecho todos los wipes y reflasheado?
Hi, I work. seem silly but the keyboard has been changed and has come to first.
certainly never been clear to me what the phone reflash.
thank you very much everyone.
hug a friend.
Sent from my LG-P970 using XDA App
nada, se me queda pillado el teléfono, se reinicia sin apagarse del todo y ya no puedo hacer overclocking, se me cuelga.
Sent from my LG-P970 using XDA App
i do a full wipe and install nova 8 and aoverclock doesnt works, frezze phone or run very slow like 200 mhz :S, nova 8 have so many issues, i think rollback to stock from LG
hice full wipe e instale y nada, si overclockeo se cuelga o corre muy lento aparte de verle muchas fallas a nova q estoy a punto de irme a la stock mas estable
Only a comment: OVERCLOCK IS NOT MANDATORY
Enjoy your stock ROM overclock.
Huexxx said:
Only a comment: OVERCLOCK IS NOT MANDATORY
Enjoy your stock ROM overclock.
Click to expand...
Click to collapse
What's actually the purpose of overclock, perhaps those people doesn't know it (yet)...
CMIIW.
Hello.
I have problem. I can't install on my phone any rom.
I have stock kernel and not broke bootloader
I try install
update-GingerDX.v022
[email protected]
update-GingerDX.v021
updateGC84.246
every time when I install, i do full reset->reboot. system going up i see 1 Sony logo and on second logo phone have problem phone stay on this animation
I use xrecovery and CWM everytime this same problem.
I install updateGC84.246 in past and i don't have any problem ;./
What is wrong;/
Sory for my bad english
EDIT:
I have solution !
I format sd card and now i dont have problem
just flash latest baseband! use flashtool to do that!
http://forum.xda-developers.com/showthread.php?t=976538
es posible que ademas de flashear la baseband tengas que desbloquear el bootloader lo cual es en extremo peligroso porque puedes dañar definitivamente el equipo, como me paso a mi, por otra parte puedes instalar la rom Ginger Dx V22 es la que tengo en mi Sony Ericcson Xperia X8
Sócrates Piña said:
es posible que ademas de flashear la baseband tengas que desbloquear el bootloader lo cual es en extremo peligroso porque puedes dañar definitivamente el equipo, como me paso a mi, por otra parte puedes instalar la rom Ginger Dx V22 es la que tengo en mi Sony Ericcson Xperia X8
Click to expand...
Click to collapse
English Please !
Just when i was ready to change rom i got stuked with the information that P990h is not the same thing.
More fear now, mainly due the fact that searchin "p990h" in the forum find a lot of people getting problens after upgrade the phone.
There is roms and kernels made for this model?
Please people with "H" versions post how many times you changed roms, bbs and kernels.
I have the P990h model, no problem with roms and kernels.
For your information I have already installed cm7,cm9,topogigi and many kernels like etana and spica!
I think this H in the name it is Just identify that it from Brazil
Enviado de meu Optimus 2X usando o Tapatalk 2
rosmarcelino said:
I have the P990h model, no problem with roms and kernels.
For your information I have already installed cm7,cm9,topogigi and many kernels like etana and spica!
I think this H in the name it is Just identify that it from Brazil
Enviado de meu Optimus 2X usando o Tapatalk 2
Click to expand...
Click to collapse
Please people, let me use portuguese here because there are a lot of people here in Brazil with problems with P990h + TIM.
Você também tem problema com a TIM? Teve com alguma ROM que deu problema e outra que melhorou?
um conselho de amigo, flasha qualquer rom do temasek ou carburano, com qualquer kernel do spica ou do vadonka, nao deves ter problemas, sao todas muito boas
doubts with baseband?
which better baseband to use with the rom topogigi V 2.0M?
marcelodallorto said:
which better baseband to use with the rom topogigi V 2.0M?
Click to expand...
Click to collapse
When I was using Topogigi's GB rom, I combined it with baseband 725. But my op is Claro, not TIM, so I don't really have a clue about how your phone will behave. Call quality was poor, but I always had signal. I'd suggest you to try BB 218.
Now I'm using CM9 with baseband 824. Call quality is awesome, but battery life isn't so.
Using WIUI rom here, haven't change bb though, but no problems whatsoever, tudo legal
Kernel
japmsn said:
Using WIUI rom here, haven't change bb though, but no problems whatsoever, tudo legal
Click to expand...
Click to collapse
Compadre, soy Chileno tb.. jajaja.. oiga, qué Kernel tiene ud en WIUI? cuanto ñle dura la batería? como lo tiene configurado?
OjSg said:
Dude, I'm Chilean too, hey, what kernel are you using with WIUI? how much does the battery lasts? what setup do you have?
Compadre, soy Chileno tb.. jajaja.. oiga, qué Kernel tiene ud en WIUI? cuanto ñle dura la batería? como lo tiene configurado?
Click to expand...
Click to collapse
Hey, all I've done to my O2X was flash WIUI, no bb changes because the one that came with the phone works great, haven't changed kernels either.
I usually charge the phone once a day, but I guess if I charged it to 100% it'd last a little less than two days with moderate usage (play a little bit, call and use wifi.)
greetings
xD buena, a mi O2X lo unico que hice fue flashearle WIUI, ni cambios de baseband porque la que venia me funciona bien, ni tampoco he probado otros kernels.
Generalmente lo cargo una vez al dia, pero supongo que desde 100% la bateria me duraria poco menos de dos dias con uso moderado (jugar un rato, llamar, usar wifi).
saludos, e intenta postear en ingles, reglas del foro
Hi, my problem is that i've flashed every CM10 & CM10.1 roms on my P990h with Movistar Venezuela and i don't have signal exccept Wifi...I've flashed every BB with respective RILs I've founded, and searching forums i could read that is a compatibility issue with my phone version. There's any fix for that?? Actually i have the Django Manouche X 1.2.1 with OC KOB kernel
Unreal_Shogo said:
Hi, my problem is that i've flashed every CM10 & CM10.1 roms on my P990h with Movistar Venezuela and i don't have signal exccept Wifi...I've flashed every BB with respective RILs I've founded, and searching forums i could read that is a compatibility issue with my phone version. There's any fix for that?? Actually i have the Django Manouche X 1.2.1 with OC KOB kernel
Click to expand...
Click to collapse
Had the same problem....
Flashed official ICS, then unlocked bootloader + installed CWM, and voila! Everything works (GSM network signal is OK, SIM card detected without problems).
All done with help of AIO tool: http://forum.xda-developers.com/showthread.php?t=2020737
So:
1. Upgrade your phone using Smart flash or LG update
2. Unlock bootlaoder + install CWM (Option 8 in AIO)
3. Copy Django Manouche X 1.2.1 to SDCARD
4. Enter recovery, Wipe system, data, dalvik, flash DM X 1.2.1
Reboot and wait for boot around 3-5 minutes.
Hope this helps.
La solucion a tu problema!
Amigo yo soy de Venezuela y tambien he probado todas las roms, con todas las bandas base, ril y kernels posibles y ninguna CM10 ni CM10.1 funciona debido a que nuestro modelo es el P990H, la unica rom que funcion es la que se instala con Nvflash y despues de instalar te recomiendo instalar el Kernel de kowalski para eliminar el bug de llamadas, debes entrar al post que dice [TOOL] Full Brick Repair (Clean & Easy) e instalar la rom que sale alli.
English please. Thid is international forum.
Sent from my LG-P990 using xda app-developers app
romiguel said:
Amigo yo soy de Venezuela y tambien he probado todas las roms, con todas las bandas base, ril y kernels posibles y ninguna CM10 ni CM10.1 funciona debido a que nuestro modelo es el P990H, la unica rom que funcion es la que se instala con Nvflash y despues de instalar te recomiendo instalar el Kernel de kowalski para eliminar el bug de llamadas, debes entrar al post que dice [TOOL] Full Brick Repair (Clean & Easy) e instalar la rom que sale alli.
Click to expand...
Click to collapse
Si amigo asi lei que nuestra version P990H no es compatible. La Django siempre me ha funcionado perfecto, es con las CM10 que me han causado ese problema. Que version es la rom que se instala con Nvflash??
Yes my friend I could read that our P990H version isn't compatible. The Django rom always worked perfectly, the problem is with the CM10 that causes me the problem. What rom version is that from Nvflash installation??
asmerito said:
Had the same problem....
Flashed official ICS, then unlocked bootloader + installed CWM, and voila! Everything works (GSM network signal is OK, SIM card detected without problems).
All done with help of AIO tool: http://forum.xda-developers.com/showthread.php?t=2020737
So:
1. Upgrade your phone using Smart flash or LG update
2. Unlock bootlaoder + install CWM (Option 8 in AIO)
3. Copy Django Manouche X 1.2.1 to SDCARD
4. Enter recovery, Wipe system, data, dalvik, flash DM X 1.2.1
Reboot and wait for boot around 3-5 minutes.
Hope this helps.
Click to expand...
Click to collapse
I have signal and my sim card is detected with the official ics and django roms, the problem is with the CM10 as said. Is really disappointing because the 2012-11-05 nightly worked fine except a few bugs but i had signal wifi and bt
CM10 on P990H
You have to get into the thread called [TOOL] Full Brick Repair (Clean & Easy) and download that version, install it, after that, download the new version on kowalski kernels it works pretty good, if you do that you could have cm10 installed on your P990H.
---------- Post added at 02:48 AM ---------- Previous post was at 02:43 AM ----------
The version installed with nvflash its cm-10-20121105
romiguel said:
You have to get into the thread called [TOOL] Full Brick Repair (Clean & Easy) and download that version, install it, after that, download the new version on kowalski kernels it works pretty good, if you do that you could have cm10 installed on your P990H.
---------- Post added at 02:48 AM ---------- Previous post was at 02:43 AM ----------
The version installed with nvflash its cm-10-20121105
Click to expand...
Click to collapse
Ok i will try it :laugh:
romiguel said:
Amigo yo soy de Venezuela y tambien he probado todas las roms, con todas las bandas base, ril y kernels posibles y ninguna CM10 ni CM10.1 funciona debido a que nuestro modelo es el P990H, la unica rom que funcion es la que se instala con Nvflash y despues de instalar te recomiendo instalar el Kernel de kowalski para eliminar el bug de llamadas, debes entrar al post que dice [TOOL] Full Brick Repair (Clean & Easy) e instalar la rom que sale alli.
Click to expand...
Click to collapse
(Trying to translate - Thanks to Google's Translate)
It seems to me that what that tool does is install cm-10-20121105-NIGHTLY-P990 but using NVFLASH; if I install CM via CWM i got the same result, CM10 working with telephone signal. The problem is not to install CM10, but installing the latest CM and get signal, since later versions to cm-10-20121105-NIGHTLY-P990 don't get signal on P990h.
Is there a way to install the latest CM on P990h and have signal?
cesarmatute said:
(Trying to translate - Thanks to Google's Translate)
It seems to me that what that tool does is install cm-10-20121105-NIGHTLY-P990 but using NVFLASH; if I install CM via CWM i got the same result, CM10 working with telephone signal. The problem is not to install CM10, but installing the latest CM and get signal, since later versions to cm-10-20121105-NIGHTLY-P990 don't get signal on P990h.
Is there a way to install the latest CM on P990h and have signal?
Click to expand...
Click to collapse
I don't think so because this problem appears since LG released out the new kernel. I have the dual boot Django 1.3 and CM10 20121105 and work fine
Unreal_Shogo said:
Hi, my problem is that i've flashed every CM10 & CM10.1 roms on my P990h with Movistar Venezuela and i don't have signal exccept Wifi...I've flashed every BB with respective RILs I've founded, and searching forums i could read that is a compatibility issue with my phone version. There's any fix for that?? Actually i have the Django Manouche X 1.2.1 with OC KOB kernel
Click to expand...
Click to collapse
Hey man, did you finally solve your problem? I had exactly the same problem and i found the solution on this guide: http://forum.xda-developers.com/showthread.php?t=2087215
I'am from Venezuela (Movistar) too, and i have a P990h just like yours.
Deleted
cesarmatute said:
Hey man, did you finally solve your problem? I had exactly the same problem and i found the solution on this guide: http://forum.xda-developers.com/showthread.php?t=2087215
I'am from Venezuela (Movistar) too, and i have a P990h just like yours.
Click to expand...
Click to collapse
No man I didn't try yet because i'm full with the studies D: i will try tomorrow maybe xD thanks man that is a good new. Maybe the dual boot could work properly with the Django 1.4 and the last panaroid android jb
Quick question, is it possible to dual boot a CM7 and CM10 rom on the same phone or will this not work because of the different BaseBands needed?
Bihariel has a dual boot tread for old bootloader, and spyrosk for the new bootloader (based on bihariel's)
Sent from my LG-P990 using xda app-developers app
Diskb0x said:
Quick question, is it possible to dual boot a CM7 and CM10 rom on the same phone or will this not work because of the different BaseBands needed?
Click to expand...
Click to collapse
base band need not be different....only thing would be one ROM would show unknown base band....Burr what is important is your communication should be good.
You have to be on the same bootloader...old or new...only one
Then don't use ROM which has a wiping script...it will delete your partitions...
Rest read in spyrosk dual boot thread...yes it was initially made by bihareil.....credits to both.
O2X with Magical ICS ROM and supersonic kernels from my buddies
SREEPRAJAY said:
base band need not be different....only thing would be one ROM would show unknown base band....Burr what is important is your communication should be good.
You have to be on the same bootloader...old or new...only one
Then don't use ROM which has a wiping script...it will delete your partitions...
Rest read in spyrosk dual boot thread...yes it was initially made by bihareil.....credits to both.
O2X with Magical ICS ROM and supersonic kernels from my buddies
Click to expand...
Click to collapse
I believe than a new BaseBand is necesary i installed paranoid for old bootloader in my O2X with cyanogenmod 7.2 and BaseBand 0521 (a old BaseBand) and i didn't have mobile signal, it said error from scan mobile operators, i have a p990h, i am from Colombia.
Eduardo9309 said:
I believe than a new BaseBand is necesary i installed paranoid for old bootloader in my O2X with cyanogenmod 7.2 and BaseBand 0521 (a old BaseBand) and i didn't have mobile signal, it said error from scan mobile operators, i have a p990h, i am from Colombia.
Click to expand...
Click to collapse
Estimado soy de Chile y uso movistar, tambien prove con claro y con entel (las 3 grandes empresas de aca) uso cyano 7.2 estable y la bb que uso es 0725 y me anda todo muy bien, incluso con mis manos libres bluetooh motorola q uso para escuchar musica tmbn, el wifi es estable mi 3g anda muy bien, ahora nunca he probado con dual boot y tampoco la cm10, le swap a traves de terminal copiando lo que pusieron aca:
http://forum.xda-developers.com/showthread.php?t=2100058
lo unico que cambie fue el directorio del archivo swap que lo puse en la sd (tengo clase-10 de 16gb) y que se active cuando la ram este ocupada en un 25% espero haber sido de ayuda, saludos
:good:
I would also be interested in an how-to on dual boot.
Thanks in advance.
duartix said:
I would also be interested in an how-to on dual boot.
Thanks in advance.
Click to expand...
Click to collapse
Just look in development section and you'll find the dedicated tread. It's also included in the AIO tool found under stickies here just follow instructions carefully. Cm are more dependent regarding baseband than stock. 218b usually works good, but that needs to be tried as it depends on your region sometimes