Hi
(less than 10 posts, so i have to post it here)
i suffer from the bug which is described in the cm9 owain developer thread.
http://forum.xda-developers.com/showpost.php?p=24086754&postcount=1681
I'm not sure i really have the same bug, but something similar. Other users in a german forum also have this problem.
The Problem:
1. start phone
2. wlan is on
3. deactivate wlan -> mobile data starts
4. activate wlan -> mobile data off
5. wait about 15minutes, phone in standby
6. deactivate wlan -> no mobile data starting
7. toogle flight mode -> mobile data working again
8. wait again about 15 minutes -> mobile data fails again
Without waiting some minutes after toggling the flight mode or boot everything works as it should.
Disabling automatic time didn't work for me. Still the same issues.
I installed alogcat. can someone tell me which filter i can set to get only relevant information?
thanks
Timo
i also encountered this issue, however it started on cm 7 and even when i reverted to stock rom the issue persisted.
ive sent my device in for repair (2nd time, since they did nothing the 1st time).
so i dont think its a rom issue since it is present with all roms ive tested, also different bb (from 218 to 1120 and different ril combimations) .
so since this started happenig about 2months or so ago i dont think it is software rwlated but then that is just a guess....
would be great if you could provide some filtered logs for the devs so they can see if its software related.
Sent from my HTC Wildfire using XDA
Same issue here!
Since i have CM9, i have this issue. Baseband 218 works only perfect on CM7.
Even at stock, I have this problem now...
hmm can it be that cm9 damages the device? or does something that is not reverted when resetin the device to stock?
Sent from my HTC Wildfire using XDA
did you just restore a back up stock ROM or have you tried smartflashing the stock ROM?restoring back ups sometime are not erasing some system files...try smartflashing the stock ROM...it will wipe everything on your phone including partition...and your OS is back to stock(unrooted)
chupi_24 said:
did you just restore a back up stock ROM or have you tried smartflashing the stock ROM?restoring back ups sometime are not erasing some system files...try smartflashing the stock ROM...it will wipe everything on your phone including partition...and your OS is back to stock(unrooted)
Click to expand...
Click to collapse
i used smartflash, thats why i think its not software related or at least not cm9 related...
Sent from my HTC Wildfire using XDA
i have a same problem once in a while signal dissapears on cm9. Now testing on Kang Cm7.2 with 20c BB and 128 RIL.
I called LG, and my device is tomorrow exchanged (VIP service in the Netherlands), hope that the solution will be.
I tested my device with CM7 KANG 80 again yesterday. With CM7 data works after i disable WLAN. Back again on CM9 the data does not activate. Only after toggling Flightmode.
hm interesting... maybe there are multiple ptoblems which cause the same effect....
Sent from my HTC Wildfire using XDA
UPDATE
OWAIN 31 CM9
Baseband v10d 0725
harsh kernel
still same problems.
Phone is now exchanged (today). I think the bug is fixed now for me. Will checking out these days!
gerbenp said:
Phone is now exchanged (today). I think the bug is fixed now for me. Will checking out these days!
Click to expand...
Click to collapse
you got a new device? please let me know if you still get the problem.
Sent from my HTC Wildfire using XDA
I got the same problem since V20q BB.
Gesendet von meinem Optimus 2X mit Tapatalk
a more experienced android user/tester/.. told me, that it is a general cm9 problem. so there is nothing we can do, but waiting.
this also fits to my testings. with cm7 everything worked fine for me.
for now just deactivated wlan most of the time, my data plan is big enough.
whenever i hear something new i'll post it.
-----------------------------------
owain wrote he probably fixed it.
downloading kang 35 and testing.
Pitscho said:
owain wrote he probably fixed it.
downloading kang 35 and testing.
Click to expand...
Click to collapse
Still don't working for me (coming from full wipe)
yep, for me neither.
grognaz said:
you got a new device? please let me know if you still get the problem.
Sent from my HTC Wildfire using XDA
Click to expand...
Click to collapse
Problem is now fixed for me. Today and yesterday have been outdoors, and everything just went back the way it was!
gerbenp said:
Problem is now fixed for me. Today and yesterday have been outdoors, and everything just went back the way it was!
Click to expand...
Click to collapse
And that is with a new o2x?
Sent from my HTC Wildfire using XDA
grognaz said:
And that is with a new o2x?
Sent from my HTC Wildfire using XDA
Click to expand...
Click to collapse
Yes, that's right.
Related
Hi all.
I am currently using the latest version of Slick2X-F 4.1 606 ril.
I think i have found out why my phone reboots spontaneously sometimes (2 reboots a day and sometimes more depending on where i am)
It happens when switching from 3G + WIFI, this leads me to think it's a error in the WIFI driver / 3G /H or we need a kernel patch.
I have tried all basebands and now i am using the newest and 606 ril.
Could a developer please take a look at this log.
http://xwb.dk/android_debug.log
I know it says kernel panic but the question is why it goes into kernel panic, i am a skilled Linux administrator but i can't figure out why.
I hope this helps others which is currently in the same situation.
Please help.
Thanks in advance.
I dont know much about this, but have you tried a different kernal?? to see if this still happens??
If it is the kernal that is causing the problem surely everyone else using that rom + kernal would be experiencing the same.
Kickasskev said:
I dont know much about this, but have you tried a different kernal?? to see if this still happens??
If it is the kernal that is causing the problem surely everyone else using that rom + kernal would be experiencing the same.
Click to expand...
Click to collapse
I have tried 2 different kernels, maybe you can recommend one ?
Thanks
kurt666 said:
I have tried 2 different kernels, maybe you can recommend one ?
Thanks
Click to expand...
Click to collapse
You can try
http://forum.xda-developers.com/showthread.php?t=1119771
or
http://forum.xda-developers.com/showthread.php?t=1029799
these are the two i used.
looks like you are using "2.6.32.9-fakeShmoo-psycho-Cpasjuste.5-g28982b2-dirty", kernel, while as far I know this kernel only works with stock/mcr? btw, may i know how do you catch kernel panic? i still don't know how to track kernel for problem when it get stuck in LG boot.
fajarep said:
looks like you are using "2.6.32.9-fakeShmoo-psycho-Cpasjuste.5-g28982b2-dirty", kernel, while as far I know this kernel only works with stock/mcr? btw, may i know how do you catch kernel panic? i still don't know how to track kernel for problem when it get stuck in LG boot.
Click to expand...
Click to collapse
I catch kernel panic when my OX2 automatically switches from 3G/H to WIFI i have just tried to switch off WIFI and i didn't catch kernel panic for a whole day, sometimes it did it 2 - 3 times a day.
I have also tried to shutdown facebook sync, because i read in the debug log sometimes about sync, that could also be the key i am not sure.
Kickasskev said:
You can try
http://forum.xda-developers.com/showthread.php?t=1119771
or
http://forum.xda-developers.com/showthread.php?t=1029799
these are the two i used.
Click to expand...
Click to collapse
Thanks i will try those in the weekend.
I havn't had a single kernel panic since i removed facebook sync and uninstalled Y5.
I will now install Y5 and setup auto wifi on/off and see if the kernel panic comes back, if not it must be facebook sync.
btw i have not tried a new kernel.
kurt666 said:
I havn't had a single kernel panic since i removed facebook sync and uninstalled Y5.
I will now install Y5 and setup auto wifi on/off and see if the kernel panic comes back, if not it must be facebook sync.
btw i have not tried a new kernel.
Click to expand...
Click to collapse
I always use seesmic for FB and TW. Maybe sns will work, when i get my phone back from repair (dust under the screen) I'll update the rom. This the fourth time i get a new O2X due to hardware faults...... dead pixels etc... but that's not on topic
Sent from my HTC Desire using XDA App
peewster said:
I always use seesmic for FB and TW. Maybe sns will work, when i get my phone back from repair (dust under the screen) I'll update the rom. This the fourth time i get a new O2X due to hardware faults...... dead pixels etc... but that's not on topic
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Thanks will try seesmic. Good luck with your phone
And thanks for this nice rom.
Sent from my LG-P990 using XDA Premium App
Kickasskev said:
You can try
http://forum.xda-developers.com/showthread.php?t=1119771
or
http://forum.xda-developers.com/showthread.php?t=1029799
these are the two i used.
Click to expand...
Click to collapse
tried moops_r3.zip but i am unable to boot up using that kernel.
tried ternityProject Kernel --Experimental Branch-- v2.3 FroYo -update.zip which is so far working great.
This is due to i i had 2 times kernel panic the last 2 days, and i didn't install Y5, i did however use WIFI and 3G/H.
Update:
just flashed EternityPRJ_P990KRN_1.5b.zip due to BSOD 2 times using ernityProject Kernel --Experimental Branch-- v2.3 FroYo -update.zip.
Will update you later about the progress.
Hi, I'm a bit lost.
I'm wanting to have the CM7 for my LG Thrill. I'm not a fan of being an updater this, update that bull****.
I want a stable ROM, does anyone have a link to the LG Thrill Almost CM7?
I want a working CM7 build that I've not gotta worry about waiting every week to update.
I'm currently on Doomed Froyo & to add its my favorite ROM.
Yet, I'm tired of it after seeing no future ROM builds as of lately.
Has anybody any idea of what I can do? :/
Sent from a Doomed Optimus 3D
Hope this helps...
http://forum.xda-developers.com/showthread.php?t=1302162
When it does release in final Cyanogen 7.1 / 9.x (Maybe? Hopefully?) , definitely go with that
Soo, yeah.
iamsoawesome said:
Hope this helps...
http://forum.xda-developers.com/showthread.php?t=1302162
When it does release in final Cyanogen 7.1 / 9.x (Maybe? Hopefully?) , definitely go with that
Soo, yeah.
Click to expand...
Click to collapse
I just had a random reboot 45 mins after flashing this.
Sent from my Optimus 3D using xda premium
I am going to give it a run for a day see what happens.I'm about to grab another phone because lack of Roms for this phone.Maybe a skyrocket or vivid who knows.
Sent from my Optimus 3D using xda premium
Sorry man, worked with me no problem. If it does work as you want it to though, it's really not worth changing phones. I know this from experience. But if not, go for it.
Just flash the CM7 nightly. Any further flashing/installing you need to do is done without wiping anything. You simply download and install the zip through recovery. Everything stays absolutely the same as far as your apps and screens and setups.
I had problems with nightlys echos and a clicking noise.So far only had that one reboot,about to test the battery out.
Sent from my Optimus 3D using xda premium
Man phone did good today battery life wasnt good then I got home from work and phone kept rebooting wouldnt go to sleep acting crazy.Back to the nightlys.
Any cm9/cm10 with full HW acceleration and hd camera recording?????
Sent from my LG-P990 using xda premium
i think your eyes/brain really far beyond for what i called "repairable"
i know you are just trolling
and i really enjoy to see someone like you to cheer us up
but if you are serious ,, here is the link to cyanogenmod for latest nightlies
P990 Cyanogenmod
Jordan~Kurniawan said:
i think your eyes/brain really far beyond what i call "repairable"
i know you are just trolling
and i really enjoy to see someone like you to cheer us up
Click to expand...
Click to collapse
x2
Um, you haven't noticed that everyone's been talking about the official CM10 lately? And yes, it has full HW acceleration. Video recording works, both HD and non HD, though the camera has its share of bugs.
+1
machoman1337 said:
Um, you haven't noticed that everyone's been talking about the official CM10 lately? And yes, it has full HW acceleration. Video recording works, both HD and non HD, though the camera has its share of bugs.
Click to expand...
Click to collapse
Regarding non HD... if you call that working... I would say it's not usable at all. 720p is the minimum setting acceptable, non HD needs fixing badly!
I m on leak ics so i will need to do following :
Nvflash gb
Root
Recovery
Cm10
M i right???????
Sent from my LG-P990 using xda premium
azharshaikh7866 said:
I m on leak ics so i will need to do following :
Nvflash gb
Root
Recovery
Cm10
M i right???????
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
Yep, that is the way!
If you experience any problems, here is how I returned to the old layout:
I tried everything NV-flash, smartflash, you name it, no luck. Then I did a emergency repair in the LG updater.
Start the Updater, select "emergency repair", make sure drivers are installed.
Battery out, press Volume Down and connect.
Enter IMEI and S/N and repair program starts.
I had to do it twice, before it finished. I maybe had a bad USB connection or cable, but after "S/W update" showed up in screen on second attempt, I reinserted battery and it went very smooth.
Let it boot.
And then root with NV-flash and you are back in business with normal GB partition table.
I can recommend Tonyp's CWM 6.0.1.5 touch for NV-flash, when you have finished rooting.
It took me 45 minutes, with a not too good internet connection.
PS.: I did not try this one: http://forum.xda-developers.com/show....php?t=1715272
but since I could not call up NV-flash, I did not want to spend even more time trying.
Can anyone tell me if its possible to get data network on thrill.
there might be, but unless someone posts it actually working, dont use cm10. when i used it, i had signal the first time. however, after an hour or so, my phone randomly rebooted. after it turned back on, service was gone, and IT KEPT rebooting every 2 minutes or so. also, same goes for jellybean and pacman
hummerh14 said:
Can anyone tell me if its possible to get data network on thrill.
Click to expand...
Click to collapse
It does works for the thrill. You just have to flash bernis u-boot and x-loader. I was using it on my v20p thrill. I switch back to GB because people on the other end of the phone were hearing an echo. If you can live with that it works fine. Just go to the o3d development threads there is a thread that explains how to install everything.
Sent my from nook tablet using android 4.2.1 jb /cm10.1 rom.
billy8362 said:
It does works for the thrill. You just have to flash bernis u-boot and x-loader. I was using it on my v20p thrill. I switch back to GB because people on the other end of the phone were hearing an echo. If you can live with that it works fine. Just go to the o3d development threads there is a thread that explains how to install everything.
Sent my from nook tablet using android 4.2.1 jb /cm10.1 rom.
Click to expand...
Click to collapse
Hey thanks for the response do you think u can link me to the guide for this. To tell the truth this phone has alot of potential just no one who wants to build ice also what do u mean jellybean does that mean there's a jellybean for o3d.
hummerh14 said:
Hey thanks for the response do you think u can link me to the guide for this. To tell the truth this phone has alot of potential just no one who wants to build ice also what do u mean jellybean does that mean there's a jellybean for o3d.
Click to expand...
Click to collapse
hey hummeh,
if it does work, another rom is called jellybam you could try it out. it is an expansion from cm10
tang097 said:
hey hummeh,
if it does work, another rom is called jellybam you could try it out. it is an expansion from cm10
Click to expand...
Click to collapse
have you tried this rom looks amazing but im sort afraid to try it because most roms never seem to work for me.
hummerh14 said:
have you tried this rom looks amazing but im sort afraid to try it because most roms never seem to work for me.
Click to expand...
Click to collapse
i've tried it in the past. it would work the first time, yet when i reboot, i would lose all sort of network and reboot randomly. however, its the same as cm10. so if cm10 works for you, this should work as well
Hey do u have working flash in that ROM u suggested on the other forum.
Sent from my LG-P925 using xda app-developers app
Sent from my LG-P920 using xda app-developers app
Is CM10 critical for you?
Because I installed ICS port by XBSA, samno kernel and v20c baseband and it's amazing, like new phone! (in Canada)
You can find all info in Optimus 3D development section. Our phones are EXACTLY the same, just different basebands. With v20c I have 3G/H in WCDMA 850 and WCDMA 1900.
It's challenging process but it worth it. I can help.
Good luck!
Does the back and search button work because other than that I don't really want it.
hummerh14 said:
Does the back and search button work because other than that I don't really want it.
Click to expand...
Click to collapse
Yes, buttons work as suppose to IF you install custom kernel on top of ROM. I use one made by samno (lots of settings too):
http://forum.xda-developers.com/showthread.php?t=2077071
Hope it will help.
Good luck!
OK what phone do u have a lg thrill or optimus 3d also I heard the back and search button doesn't work with lg thrill and if i t does work do u want to help me.
Ok, my phone was originally LG-P925g with Rogers (Canada) - I'm not sure if it was officially called Thrill since I bought it used. Then I read and realized that it's absolutely the same phone as Optimus 3D (920).
So for last year I was using Prometheus ROM with iBluekernel.
Then I decided to try ICS port from XBSA. And it worked. Lots of hoops to go thrugh but works.
Then I put kernel made by samno (in 3D development section) and that kernel solved button issue. But I got another one - at home I could connect to wifi but couldn't go past router. So today I flashed kernel made by iodak and am happy surfer.
If you just flash xbsa port you will have all 4 buttons, but BACK button works as HOME and SEARCH as BACK. HOME is HOME and SETTINGS is SETTINGS.
I hope it helps.
hummerh14 said:
OK what phone do u have a lg thrill or optimus 3d also I heard the back and search button doesn't work with lg thrill and if i t does work do u want to help me.
Click to expand...
Click to collapse
Goldenmeadow said:
Ok, my phone was originally LG-P925g with Rogers (Canada) - I'm not sure if it was officially called Thrill since I bought it used. Then I read and realized that it's absolutely the same phone as Optimus 3D (920).
So for last year I was using Prometheus ROM with iBluekernel.
Then I decided to try ICS port from XBSA. And it worked. Lots of hoops to go thrugh but works.
Then I put kernel made by samno (in 3D development section) and that kernel solved button issue. But I got another one - at home I could connect to wifi but couldn't go past router. So today I flashed kernel made by iodak and am happy surfer.
If you just flash xbsa port you will have all 4 buttons, but BACK button works as HOME and SEARCH as BACK. HOME is HOME and SETTINGS is SETTINGS.
I hope it helps.
Click to expand...
Click to collapse
So what r u using and how r the buttons also what kernel did u flash that has working WiFi and buttons.
hummerh14 said:
So what r u using and how r the buttons also what kernel did u flash that has working WiFi and buttons.[/QUOTE
Can you help me upgrade to that because im sick of the cm10 breaking wifi and the battery life is terrible
Click to expand...
Click to collapse
Q&A isn't the ideal place, but I'm not yet able to post in the dev forum, so...
I've been using the cm10.1 experimental build (p1c) posted by cdesai for the last week or so.
It's very smooth but about once a day the Sleep of Death (I think) strikes.
It never happens when I'm using the tab. A full reset brings it back, but if I don't catch it quickly it will very rapidly drain my battery and turn the tab into a small space heater. Aggravating.
Anyone else have the issue? Any ideas?
Sent from my SCH-I800 using Tapatalk 2
set your brightness to 20% and always turn-off wifi when its not in use ....its works for me....played my tab for 30 minutes and my tablet consumed only 15% of the battery
SORRY FOR MY BAD ENGLISH
*i also turn off mobile data......when i dont need to use the internet....
frrambo said:
Q&A isn't the ideal place, but I'm not yet able to post in the dev forum, so...
I've been using the cm10.1 experimental build (p1c) posted by cdesai for the last week or so.
It's very smooth but about once a day the Sleep of Death (I think) strikes.
It never happens when I'm using the tab. A full reset brings it back, but if I don't catch it quickly it will very rapidly drain my battery and turn the tab into a small space heater. Aggravating.
Anyone else have the issue? Any ideas?
Sent from my SCH-I800 using Tapatalk 2
Click to expand...
Click to collapse
Yeah. SOD probably happens randomly as for me.
Try alroger latest build. running it as my daily driver. no SOD and FC happens in a day.
imadork said:
Yeah. SOD probably happens randomly as for me.
Try alroger latest build. running it as my daily driver. no SOD and FC happens in a day.
Click to expand...
Click to collapse
Thanks, I'll give it a shot.
imadork said:
Yeah. SOD probably happens randomly as for me.
Try alroger latest build. running it as my daily driver. no SOD and FC happens in a day.
Click to expand...
Click to collapse
I always get encryption failed when installing alroger builds - I guess you are not running CDMA (p1c) ?
If you are using a p1c then you are lucky to have alroger working.
cdesai builds work great on p1c but usb tether doesn't seem to work on any CM10.x build yet which is annoying
Re: CyanogenMod 10.1 Experimental Builds
Yup.
I tried alroger's p1c and had the encryption problem. Back to cdesai's build for now.
Sent from my SCH-I800 using Tapatalk 2
frrambo said:
Yup.
I tried alroger's p1c and had the encryption problem. Back to cdesai's build for now.
Click to expand...
Click to collapse
Yeah alroger's newest builds are broken on p1c but if you go back to his first p1c release it actually works okay http://goo.gl/QBsmn
Actually I came back to the tab tonight and it was constantly rebooting in a loop so I may go back to cdesai too.
The one I am really waiting for is AOKP 4.2.2 for p1c, apparently his build machine is broken but hopefully he will post it soon.
But I cannot do usb tether or otg in any 4.1.x or 4.2.x build yet which is frustrating.
CM9.1 is very stable but missing all the 10.1 niceties.
You should put "p1c cmda" in the thread title here so we can have a 10.1 "club" for p1c folks.
I am running alrogers latest builds without any problem on my p1. Fast reliable and without any problems
I noticed fewer problems of unattended sleep or reboot after I flushed Dalvik and partition caches.
But the device still drains battery faster than the lastest CM10 nightlies (screenshots included) did, mostly because of the radio (30% - veille GSM) and while inactive (21% - tablette inactive).
Do you experience the same? Do you know where it could come from? (since I'm not able to post to dev section yet, too).
Re: CyanogenMod 10.1 Experimental Builds
If you have unknown baseband also, then the cause has been widely known. Broken modem.
Download JPZ modem zip from the development forum, unzip it and paste modem.bin to /radio to replace the one there.
Sent from my GT-I9300 using xda app-developers app
alroger's newest build from 20130328 now has working usb tether and works on my cdma (p1c)
but it's missing an adb toggle, cannot find it for the life of me
aha! found it - in CM10 you have to go to settings -> about tabet -> build number -> tap 7 times (to enable dev mode)
So several days after reflashing cdesai's experimental build I'm happy to report only one SoD compared to one or two previously.
With a bootlooping recovery, I used Heimdall to re-stock (mostly, I used a CWM kernal). I then reflashed with the same proceedure as before, wiping cache/dalvic, flashed gapps and I'm good to go.
Aside from the USB tether and BT issues (maybe someday...), my only problem now is that the screen orientation is sometimes unresponsive. Even the battery life is good, better than I had on CM 9.
I've not had any radio problems, at least none that Better Battery Stats could show me. The modem is the likely culprit.
Good suggestion on the title change p1c needs more love! :highfive:
Of course now with _ck_'s news that alroger has USB tether working, I'm tempted to try it again. Just can't leave well enough alone.
Just came back to my tablet to wake it up and the screen shows "encryption unsuccessful" wtf
Maybe alrodger build is not quite ready.
Spent an hour getting everything right again but not messing around this time, did both Titanium backup and clockwork backup.