I really really need a help!
By the way im using Cherry Mobile Magnum HD
First of all, i downloaded last night Cyanogen Mod 7.2 Bumblebee rom. and it was succesfully installed together with the CWM v5. After some tests i found it buggy and i was so upset that even though i back up my contacts and other "needed files" it was deleted and gone.
So i really need to go back to stock rom!
So here's what i did first:
- I just bring back my stock recovery to it's place so CWM v5 is gone.
- After that i Downloaded the Firmware of Cherrymobile magnum HD version 2.3 Gingerbread.
And i dont know what to do next?
- Should I install the Firmware via recovery?
- And after i install the firmware? will my stock rom be back? and Cyanogen Mod will be uninstall?
PLEASE! IT'S MY FIRST TIME TO HACK MY ANDROID PHONE and i wanted to go back to it's original rom!. Please help me!
Thankyou so much in Advance!
Rename your downloaded firmware file to firmware.nb0 and place it in the root of your SD card and flash it with stock recovery, you will get back your stock rom and CM will completely go away
Thanks for replying but, the bootloader is looping and restarting
EDITED: OMG I JUST WIPE DATA AND INSTALL THE UPDATE AND IT WORKED!!!!!!!!!!!!!
OMG..... AT LAST. MY PHONE IS BACK TO NORMAL THANKS TO YOU!
Related
Hi all,
My dad has a galaxy s. Since the stock samsung firmware is pretty bad, I installed darky's ultimate rom v10.2 on his phone, about a week ago. I have a galaxy s2, running miui, and my dad liked the interface.. so he asked me: can I have that too?
So I said, sure! I wiped his phone with clockworkmod, and flashed the miui zip. (After backing up darky's firmware offcourse)
But.. after about 1 hour of usage, he didn't like miui anymore, so he asked me if I could restore to darky's rom... so.. I went to clockworkmod, and hit the restore button. Unfortunately, it gave an error, saying something about "can't restore boot"
I tried it again.. same error.
Luckilly, I had another backup, of the stock rom, before i flashed darky. So I tried to restore that backup..
I don't know what happened, but clockworkmod doesn't work anymore. Everytime i try to do something, it keeps giving errors about unable to mount this, unable to mount that, bla bla bla.
And the phone wont boot..
However, i'm still able to access download mode.
So i think it's possible to restore it completely, but can you guys give me some advice? What should I flash with odin, and can you provide a link?
I'm really hoping for a quick respond because my dad is not happy with his phone being "dead".
Thanks in advance!
Blupmans
Sent from my GT-I9100 using Tapatalk
Are you sure Miui is not based on something other then samsung? Maybe you should try and flash a stock firmware (e.g. 2.3.4), then root for CWM, and restore that way?
Ok, you have to know:
For MIUI you just need a GB-bootloader as base and you can easily flash MIUI through CWM. But MIUI (and CM7 too) don't use the RFS-filesystem as Samsung-based ROMs (they use MTD/yaffs2 as the Nexus). So you can't restore Darky easily.
But you can do this:
- Reboot into download mode (3-button-combo)
- Flash any Samsung-based stock-FW with Odin
- Flash any kernel which fits your GB-firmware and which includes CWM
- Restore your Darky-backup through CWM
For stock go to http://www.darkyrom.com/community/index.php?threads/odin-darkyrom-10-2-resurrection-gt-i9000.4272/
Download and follow the steps in the thread, voila, recovery done
If u wanna go back to Darky's u can check Darky's ROM 10.2 Resurrection. But just for a clean install i would flash a stock JVQ first and then install Darky's.
Thanks for the reply's everyone, gonna try it this evening, when i'm home
Sent from my GT-I9100 using Tapatalk
And don't forget to press the 'Thanks'-button(s).
dmcleod said:
For stock go to http://www.darkyrom.com/community/index.php?threads/odin-darkyrom-10-2-resurrection-gt-i9000.4272/
Download and follow the steps in the thread, voila, recovery done
Click to expand...
Click to collapse
This is no stock-ROM, it's modified by Ficeto.
IT'S ALIVE!!!!
Thanks man!
and.. because you like the thanks button so much, I clicked it for you ;-)
Problem!
My Galaxy S won't boot.
When I boot into recovery it says exactly what it says on blupmans galaxy s.
I am n00b in things like this.
Can someone write a step by step guide how to restore this phone on stock firmware?
When I put phone into download mode and connect it to odin3 1.82 it wont recognioze my phone.
Please HELP!!!
I will give you thanks
Phone is locked at Croatia- Vip
EDIT: Solved!
Okay I have a Samsung I9000m I got yesterday. I made a copy of my EFS from what I Can tell and copied it to my PC. I currently am Running stock Rogers Firmware 2.3.3 and want to install a 4.0.4 firmware like Dark Knights 3. IS there anything else I need to do or can I just copy it to the root of the phone and install it with clockwork or is there something else I am missing. I go to recovery but it is the stock recovery, this is where I ma thinking I am missing something. The phone is also rooted. Can any one point me in the right direction. And yes I been looking on the forums and not seeing what I need.
Thanks
KillerbawX said:
Okay I have a Samsung I9000m I got yesterday. I made a copy of my EFS from what I Can tell and copied it to my PC. I currently am Running stock Rogers Firmware 2.3.3 and want to install a 4.0.4 firmware like Dark Knights 3. IS there anything else I need to do or can I just copy it to the root of the phone and install it with clockwork or is there something else I am missing. I go to recovery but it is the stock recovery, this is where I ma thinking I am missing something. The phone is also rooted. Can any one point me in the right direction. And yes I been looking on the forums and not seeing what I need.
Thanks
Click to expand...
Click to collapse
If you can not enter CWM Recovery mode, you can not install ICS. You need to install a kernel such as Semaphore (installed with ODIN in box PDA) and you can install it and ICS with no problem.
Oh I forgot, when you go to install ICS, you must remove the MicroSD, but may occur Bootloop.
and backup the the efs folder first!!!
Sounds like clockworkmod is not properly installed.
Revert to stock using odin. Then install CF-root
http://forum.xda-developers.com/showthread.php?t=788108
This will root your stock rom and install clockworkmod.
OK I have a GT i9000 and I did manage to get into CWMode.
Now each time I try to install new custom ROM (I choose the zip from the SD card) 5secs after it starts installing it reboots and winds up in the blue CWM recovery screen. Tried different ROM's but - nada.
Any feedback?
D_NazGUL said:
OK I have a GT i9000 and I did manage to get into CWMode.
Now each time I try to install new custom ROM (I choose the zip from the SD card) 5secs after it starts installing it reboots and winds up in the blue CWM recovery screen. Tried different ROM's but - nada.
Any feedback?
Click to expand...
Click to collapse
You need to update the bootloader to a newer version. Install a 2.3 stock rom first and it should be fine.
Trak-X said:
You need to update the bootloader to a newer version. Install a 2.3 stock rom first and it should be fine.
Click to expand...
Click to collapse
Well I thought 'cause I'm on GB 2.3.3 it is OK.
Do I really need a new bootloader?
UPDATE: I managed to install the ROM. Dunno why, but on the second CWM screen I again choose to install the zip and it did the job.
Would appreciate if someone could help me with my problem - I had earlier used CF-Root to root and install recovery which went off well, took a nandroid backup and then tried to flash CM9 through recovery. WIthin a few seconds it rebooted, showed the Cyanogenmod splash screen and went back into recovery - only this time it was a newer recovery (6.0.0.2) than what CF-Root had installed. I'm not able to install through zip file and for some reason I am not able to restore from nandroid as it says the md5 does not match. So as of now I am stuck in recovery.
To add to this, I realize that I messed up as the instructions said to update to a GB rom if coming from Froyo, which I did not notice. Any idea what I can do from here? If I can still run through this process can someone point me in the direction of a suitable GB ROM I can install? My end goal is to be on CM9, but right now would just be happy to get back to the stock GB ROM as well.
Flash to the stock firmware again? at SamMobile? That is what I did when my device did not boot up after installing CWM recovery and some rom.
skiddyrow said:
Would appreciate if someone could help me with my problem - I had earlier used CF-Root to root and install recovery which went off well, took a nandroid backup and then tried to flash CM9 through recovery. WIthin a few seconds it rebooted, showed the Cyanogenmod splash screen and went back into recovery - only this time it was a newer recovery (6.0.0.2) than what CF-Root had installed. I'm not able to install through zip file and for some reason I am not able to restore from nandroid as it says the md5 does not match. So as of now I am stuck in recovery.
To add to this, I realize that I messed up as the instructions said to update to a GB rom if coming from Froyo, which I did not notice. Any idea what I can do from here? If I can still run through this process can someone point me in the direction of a suitable GB ROM I can install? My end goal is to be on CM9, but right now would just be happy to get back to the stock GB ROM as well.
Click to expand...
Click to collapse
you better use the overcome stock gingerbread safe 5 (the best stock for all situations) google overcome.com and get the files, you will find also a tutorial for how to stock your tab before updating it to overcome or cm9 etc...
If I helped you, please press the thanks button
MarlX said:
Flash to the stock firmware again? at SamMobile? That is what I did when my device did not boot up after installing CWM recovery and some rom.
Click to expand...
Click to collapse
so the reflash from scratch works for you
If I helped you, please press the thanks button
Thanks sos_sifou - worked great! I think I'll stick with the Overcome GB ROM for a while as it works pretty good, and look at CM9 / 10 whenever it gets stable!
Hi,
I installed today Cyangenmod 10.1 but I don't like it.
My backup is overwritten with the Cyangenmod backup -_-
Soo how can ik go back to stock rom?
I had v20b on my device 4.1.2
now I have 4.2.1
Please help me
Just download the kdz and do a software update.
This will do a clean install, but since you don't have a backup it doesn't matter anyway.
leris2 said:
Just download the kdz and do a software update.
This will do a clean install, but since you don't have a backup it doesn't matter anyway.
Click to expand...
Click to collapse
Thanks!
Haha i thought i needed a .zip file for stock rom.
I searched and found that the stock rom is in a kdz file
Anyways thanks!
Ps. Sorry for my bad english grammar, I'm from The netherlands
Now i got a problem.
Updated with the tutorial about kdz.
Now my boot stucks on LG Logo with white blinking ( You know what I mean)
How can I fix it?
EDIT: Fixed: Delete cache/Format
Factory settings
Everything in recovery clockworkmod
Glad i helped you.
Install CMW and do a backup just in case something goes wrong in the future.
Hello,
I have installed Mackay rom 4.2.3 but i wana turn back too gamerz rom... How can i do this?
Today i have tryed with the classic wipe solution but i cant instal gaerzrom..Failed...
Why?
Thank u
bartalisattila said:
Hello,
I have installed Mackay rom 4.2.3 but i wana turn back too gamerz rom... How can i do this?
Today i have tryed with the classic wipe solution but i cant instal gaerzrom..Failed...
Why?
Thank u
Click to expand...
Click to collapse
The only way I was able to go back from a KK Rom was to go to back to GB 2.3.6 first and then up from there.
I dont know if you did the same as me when installing a KK but I loaded up CM10.2 (or CM11) fist so as to upgrade the CWM and increase the partition as they recommend. I guess this has to be undone, and the best way is with ODIN and 2.3.6. I re-rooted and everything afterwards. Hope it works for you its only another 10 mins.
Actually there is a quicker way because I had to go back to JB from KK and doing this worked.
Simply flash a JB kernel first then your corresponding Rom and gapps.
List of compatible kernels in the second post of this
http://forum.xda-developers.com/showthread.php?t=2557608
I usually go back to a stock rom before trying something new - and most of the time I run into less problems. If you want to stay rooted and continue using custom roms, you might go with this:
http://forum.xda-developers.com/showthread.php?t=1583026
i agree i always flash back to stock then flast dbdata file to sort out errors with partitions. then flash any other rom i require afterwards:laugh: