Related
Hi i have Xperia T which was fully working and my friend tries to make downgrade with Flashtool... i don't know exacly what he has done i'm trying to get it back alive but Setool didn't recognise the phone original update program also when i connect it to USB it is recognised by pc as Zeus Flash device on other computer as qualcoomm device any idea how i can unbrick it? i have to add pc recognise the phone without pushing any button with volume down or up is the same it is recognised also when i disconnect the battery when i tries to power it up nothing happens please help!!
biegan said:
Hi i have Xperia T which was fully working and my friend tries to make downgrade with Flashtool... i don't know exacly what he has done i'm trying to get it back alive but Setool didn't recognise the phone original update program also when i connect it to USB it is recognised by pc as Zeus Flash device on other computer as qualcoomm device any idea how i can unbrick it? i have to add pc recognise the phone without pushing any button with volume down or up is the same it is recognised also when i disconnect the battery when i tries to power it up nothing happens please help!!
Click to expand...
Click to collapse
calm down. Follow the instrctions in the third thread in the general section about how to recover froma soft brick. Its here
Follow those instructions and post here if you have any problems. Preferably with screen shots of what your PC/Phone is doing.
gregbradley said:
calm down. Follow the instrctions in the third thread in the general section about how to recover froma soft brick. Its here
Follow those instructions and post here if you have any problems. Preferably with screen shots of what your PC/Phone is doing.
Click to expand...
Click to collapse
I will describe what programs showing because i have polish version and maybe you can't understand them:
When i'm trying to connect to pc companion when pc recognise phone i'm geting message PC companion could not connect with device disconnect device and try again
When trying do sof/hard reset nothing happens
When trying to pull in fastboot or flash mode pc recognise phone always the same in conrtol panel ZEUS FLASH device pc also recognise in thisa mode without battery and without pushing any buttons but i'm not geting any led Green or blue only when i'm conecting charger or usb cable WITHOUT battery it blinks red ones
When i'm trying to flash with flashtool or original update service when program is on screen asking me to connect the device i plug usb pc recognising the phone (usb connected device sound) but program doesn't start to flash or even recognise
i have also setool when i'm trying to flash by setool when program is waiting for device connecting bar is moving on down side of window when i connect the phone it is stoping like it tries to connect but nothing happens....
i was thinking to try this but i have cheked battery voltage and it is 3,88 so i thing it is fully charged:
Here are the steps I took successfully revise my phone from soft brick.
Let the phone charge (long long time = 4+ hrs) on wall charger.
Red light on (constantly - not flashing) - charge until red light off (again very long time =16+ hrs)
Unplug from wall
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
While hold volumn down and plug in USB
Red light will be back on, after a few seconds - flash will run.
Unplug USB then power on - phone will boot and die (it's okay don't worry)
Charge the phone again - after a while (or let it charge full), you can now turn on the phone.
That is all ... Back and running.
GOOD Luck.
Timing = could be different from phone to phone - depends on battery of the phone before it dead.
please do you have any idea? for me it hangs in some kind of boot mode and i don't know how to kick it fromthis and reflash if any screens can help please tell me i will do them
biegan said:
I will describe what programs showing because i have polish version and maybe you can't understand them:
When i'm trying to connect to pc companion when pc recognise phone i'm geting message PC companion could not connect with device disconnect device and try again
When trying do sof/hard reset nothing happens
When trying to pull in fastboot or flash mode pc recognise phone always the same in conrtol panel ZEUS FLASH device pc also recognise in thisa mode without battery and without pushing any buttons but i'm not geting any led Green or blue only when i'm conecting charger or usb cable WITHOUT battery it blinks red ones
When i'm trying to flash with flashtool or original update service when program is on screen asking me to connect the device i plug usb pc recognising the phone (usb connected device sound) but program doesn't start to flash or even recognise
i have also setool when i'm trying to flash by setool when program is waiting for device connecting bar is moving on down side of window when i connect the phone it is stoping like it tries to connect but nothing happens....
i was thinking to try this but i have cheked battery voltage and it is 3,88 so i thing it is fully charged:
Here are the steps I took successfully revise my phone from soft brick.
Let the phone charge (long long time = 4+ hrs) on wall charger.
Red light on (constantly - not flashing) - charge until red light off (again very long time =16+ hrs)
Unplug from wall
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
While hold volumn down and plug in USB
Red light will be back on, after a few seconds - flash will run.
Unplug USB then power on - phone will boot and die (it's okay don't worry)
Charge the phone again - after a while (or let it charge full), you can now turn on the phone.
That is all ... Back and running.
GOOD Luck.
Timing = could be different from phone to phone - depends on battery of the phone before it dead.
please do you have any idea? for me it hangs in some kind of boot mode and i don't know how to kick it fromthis and reflash if any screens can help please tell me i will do them
Click to expand...
Click to collapse
I want to add when i'm trying to connect for example SE ARC it is recognised as SEMC Flash Device and all programs recognising it
biegan said:
I want to add when i'm trying to connect for example SE ARC it is recognised as SEMC Flash Device and all programs recognising it
Click to expand...
Click to collapse
I forgot to add when i'm doing test point to unlock for example ARC it is also recognised as ZEUS Flash so i thing it stays in some king of boot mode but there is no information in the net how to kick it out or even do jtag because i can doit also but i think it is not supported yet
You have an xperia T, then how can you connect the phone to the PC WITHOUT a battery? It is not removable in the Xperia T!
Have you flashed anything to the device before this happened?
EDIT
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
Click to expand...
Click to collapse
Which firmware is .111? I dont beleive there has ever been a .111 firmware for the T? Can you give me the post you found that in and the download link, thanks
gregbradley said:
You have an xperia T, then how can you connect the phone to the PC WITHOUT a battery? It is not removable in the Xperia T!
Have you flashed anything to the device before this happened?
EDIT
Which firmware is .111? I dont beleive there has ever been a .111 firmware for the T? Can you give me the post you found that in and the download link, thanks
Click to expand...
Click to collapse
i disassemble the back cover it's very simple the battery connector is on the flex cable i know what i'm talking if you want i can send pics i'am using flashifile LT30p_7.0.A.1.303_CH the most important think that no program is detecting the phone only pc recognising the phone
biegan said:
i disassemble the back cover it's very simple the battery connector is on the flex cable i know what i'm talking if you want i can send pics i'am using flashifile LT30p_7.0.A.1.303_CH the most important think that no program is detecting the phone only pc recognising the phone
Click to expand...
Click to collapse
OK,
Yes thats true but it sounds similar to a problem I have come across before. But this happened when someone flashed the S1 update on the TX instead of the T.
Have you unistalled evrything android/sdk/adb related from your computer and started again.
Also, you can try another machine.
Are you on win8? That has issues with drivers from Sony.
gregbradley said:
OK,
Yes thats true but it sounds similar to a problem I have come across before. But this happened when someone flashed the S1 update on the TX instead of the T.
Have you unistalled evrything android/sdk/adb related from your computer and started again.
Also, you can try another machine.
Are you on win8? That has issues with drivers from Sony.
Click to expand...
Click to collapse
Hi no i didn't try i always use XP for software problems with phones i don't knoiw exacly what he did with the phone you think when i try to do it on clean system should help? i tried on 2 computers and problem is the same i think to general problem is that computer recognising the phone like a ZEUS FLash not SEMC Flash device i think somehow he erase whole flash or write from other model and now i can't do anythink
biegan said:
Hi no i didn't try i always use XP for software problems with phones i don't knoiw exacly what he did with the phone you think when i try to do it on clean system should help? i tried on 2 computers and problem is the same i think to general problem is that computer recognising the phone like a ZEUS FLash not SEMC Flash device i think somehow he erase whole flash or write from other model and now i can't do anythink
Click to expand...
Click to collapse
Yes, it sounds like your friend has done something silly to the phone. Untill we know exactly what he did, and what he tried to flash we are just guessing...
gregbradley said:
Yes, it sounds like your friend has done something silly to the phone. Untill we know exactly what he did, and what he tried to flash we are just guessing...
Click to expand...
Click to collapse
All i know he told me he tries to downgrade the phone to make a root and he was using flashtool is there any other methods/programs which can flash lt30p? i have all service boxes like riff box setool but riff don't make it setool can't start flashing i don't know any testpoint or jtag?
biegan said:
All i know he told me he tries to downgrade the phone to make a root and he was using flashtool is there any other methods/programs which can flash lt30p? i have all service boxes like riff box setool but riff don't make it setool can't start flashing i don't know any testpoint or jtag?
Click to expand...
Click to collapse
I dont know where testpoint is on xperia T as we have never been down that road here.
Has he tried to use EMMA to flash something? That is meant only for unlocked bootloaders, maybe he has messed up with that, but I am onl guessing here and i cant really see why that would do anything to the boot...
Maybe he tried to flash it, dropped it, broke it, and thinks a software hack can help him....
gregbradley said:
I dont know where testpoint is on xperia T as we have never been down that road here.
Has he tried to use EMMA to flash something? That is meant only for unlocked bootloaders, maybe he has messed up with that, but I am onl guessing here and i cant really see why that would do anything to the boot...
Maybe he tried to flash it, dropped it, broke it, and thinks a software hack can help him....
Click to expand...
Click to collapse
No it is 100% software problem he is noob in this and all he told me he trried to root the phone but first he tried to downgrade it with flashtool but if flashtool doens't recognise the phone setool also do you think there is any other option?
biegan said:
No it is 100% software problem he is noob in this and all he told me he trried to root the phone but first he tried to downgrade it with flashtool but if flashtool doens't recognise the phone setool also do you think there is any other option?
Click to expand...
Click to collapse
Not that I know of. Bin4ry is someone who has experience with setool and may be able to help. Try PM'ing him.
Sorry I couldnt be of much more use.
gregbradley said:
Not that I know of. Bin4ry is someone who has experience with setool and may be able to help. Try PM'ing him.
Sorry I couldnt be of much more use.
Click to expand...
Click to collapse
Thanks bro anyway for your help!!
any update about your device...
i have exactly same problem as you mentioned but my device is Xperia V (LT25i)....
waiting for your reply. please do update.
I also had the same problem, my cell phone xperia v. .. please help me .... What can I do now?
bambox said:
I also had the same problem, my cell phone xperia v. .. please help me .... What can I do now?
Click to expand...
Click to collapse
what have you already done to try and fix it?
What did you do to make it not work?
What are the symptoms of your phone?
gregbradley said:
what have you already done to try and fix it?
What did you do to make it not work?
What are the symptoms of your phone?
Click to expand...
Click to collapse
a week ago I upgraded to 4.1.2, and using kernel vKernel_Xperia_V_1.2.5
after 1 week of use, I reboot my xperia v, but do not want to live anymore, Charging not respont, could not power on, flsahmode and fasbootmode.
my xperia v die, but still 70% battery.
on my pc not detect (only ZEUS FLASH DEVICE)
bambox said:
a week ago I upgraded to 4.1.2, and using kernel vKernel_Xperia_V_1.2.5
after 1 week of use, I reboot my xperia v, but do not want to live anymore, Charging not respont, could not power on, flsahmode and fasbootmode.
my xperia v die, but still 70% battery.
on my pc not detect (only ZEUS FLASH DEVICE)
Click to expand...
Click to collapse
put it on charge for 24 hours and leave it alone.
after the 24 hours turn it on.
hi all just today and installed the official rom of sony 4.3 for my sp with boot loader debloqueado and root, I wanted to delete all the **** of the sd and e removed and hit the mobile black screen and you can not turn not enter mode fastboot or anything I connect it to pc and recognized as qhsusb_dload just install the driver and flashtool is not recognizing pc companion does not, I need your help please!
pd. payment assistance
ibiza22 said:
hi all just today and installed the official rom of sony 4.3 for my sp with boot loader debloqueado and root, I wanted to delete all the **** of the sd and e removed and hit the mobile black screen and you can not turn not enter mode fastboot or anything I connect it to pc and recognized as qhsusb_dload just install the driver and flashtool is not recognizing pc companion does not, I need your help please!
pd. payment assistance
Click to expand...
Click to collapse
So your phone just got bricked just like me....
Send it to service center, its only option since you cant enter flashmode or fastboot
vipseifer said:
So your phone just got bricked just like me....
Send it to service center, its only option since you cant enter flashmode or fastboot
Click to expand...
Click to collapse
hello. you have the same problem? I can only send it for service? enter warranty?
Bootloader was unlocked and you wanted to format the internal and external SD to start fresh I suppose?
mrjraider said:
Bootloader was unlocked and you wanted to format the internal and external SD to start fresh I suppose?
Click to expand...
Click to collapse
if exactly that. but I have open bootloader. I wanted to leave everything clean, you know how I can repair my brick?
So bootloader is still locked? (I cant get the answer out of your comments sorry) and to try and fix it is by Flashing a 266 ftf file via Flashtool see my tutorial in my signature
mrjraider said:
So bootloader is still locked? (I cant get the answer out of your comments sorry) and to try and fix it is by Flashing a 266 ftf file via Flashtool see my tutorial in my signature
Click to expand...
Click to collapse
Hello, I am Spanish and I use translator. my xperia has the open bootloader. no any led lights or anything, does not vibrate when reset button squeezed back. the pc recognizes it as qhsusb_dload not pccompanion flashtool recognize or does not go into flash mode or anything I can do? I need help, reward anybody who helps me.
You could try this on another computer... Perhaps it will help.
mrjraider said:
You could try this on another computer... Perhaps it will help.
Click to expand...
Click to collapse
I've tried on two pc, both with windows 7, one 32 bit and one 64 bit.
* neither recognizes my mobile qhsusb_dload only mode. pccompanion and flashtool does not recognize it either. means that if I use the windows xp computer will recognize it?
the mobile does not turn any LED or vibrate or anything this full brick
mrjraider said:
You could try this on another computer... Perhaps it will help.
Click to expand...
Click to collapse
His phone just bricked like mine i guess, no led, no vibration, buttons dont work. So just have to send to service.
vipseifer said:
His phone just bricked like mine i guess, no led, no vibration, buttons dont work. So just have to send to service.
Click to expand...
Click to collapse
hello if the mobil before dying day, I guarantee you opened the bootloader.tiene?
warranty covers my **** with open boot loader?...
vipseifer said:
His phone just bricked like mine i guess, no led, no vibration, buttons dont work. So just have to send to service.
Click to expand...
Click to collapse
Hello, I have taken the phone service at the end of saber week if covered by warranty.
win!!!
hi all. and today I received my xperia sp arranged. the technical service will change the motherboard on the phone and totally free warranty covered it
My z3compact became a brick. I can't turn on it . When I connect to computer , I can't use flashtool to flash a rom because "usb debug off"appear . When I use pc companion to repair , it can't detect my phone though I enter the volume- for a long time . When my phone connect to flashtool , the red led can turn on for several seconds ,then it turn off ,green led never turn on! When I plug in , nothing happen . I don't know how to deal with my phone .Can someone help me?
liam gao said:
My z3compact became a brick. I can't turn on it . When I connect to computer , I can't use flashtool to flash a rom because "usb debug off"appear . When I use pc companion to repair , it can't detect my phone though I enter the volume- for a long time . When my phone connect to flashtool , the red led can turn on for several seconds ,then it turn off ,green led never turn on! When I plug in , nothing happen . I don't know how to deal with my phone .Can someone help me?
Click to expand...
Click to collapse
Did u shut the device down? With volume up and power button pressing at the same time till its vibrate?
Sent from my Xperia Z2 using XDA-Developers mobile app
Yes , I shut down my phone as you mentioned, the device vibrated for 3 times , then I connect it to my pc , pc companion can't detect it ,flashtool only appear device connected but usb debug off .
liam gao said:
Yes , I shut down my phone as you mentioned, the device vibrated for 3 times , then I connect it to my pc , pc companion can't detect it ,flashtool only appear device connected but usb debug off .
Click to expand...
Click to collapse
Did u get it into fastboot mode?
Sent from my Xperia Z2 using XDA-Developers mobile app
der-cyanoge said:
Did u get it into fastboot mode?
Click to expand...
Click to collapse
no? I can't , screen is totally dark ,never light , I can't enter fastboot and recovery.mode:crying:
liam gao said:
no? I can't , screen is totally dark ,never light , I can't enter fastboot and recovery.mode:crying:
Click to expand...
Click to collapse
So u dont need a light for fastboot so just make the phone of by pressing power and volume up button than wait 5sec then u just hold the vol. Up button and connect ur phone with the PC
Sent from my Xperia Z2 using XDA-Developers mobile app
der-cyanoge said:
So u dont need a light for fastboot so just make the phone of by pressing power and volume up button than wait 5sec then u just hold the vol. Up button and connect ur phone with the PC
Click to expand...
Click to collapse
I tried for several times , failed.... Now I plug in the battery . I hope the screen can light on
der-cyanoge said:
So u dont need a light for fastboot so just make the phone of by pressing power and volume up button than wait 5sec then u just hold the vol. Up button and connect ur phone with the PC
Click to expand...
Click to collapse
Though I hold vol.+ and power ,device vibrated ,but nothing happen.
Dont press power button for fastboot mode just do power of if its vibrate 3 times than your phone is off OK? Next step is connect ur USB cable to PC than press only the vol up button !!!!!! not the power button!!!!!! and then connect ur phone with the USB cable so then just make fastboot flash bootimage Form a Rom of your choice vor stock firmware
Sent from my Xperia Z2 using XDA-Developers mobile app
der-cyanoge said:
Dont press power button for fastboot mode just do power of if its vibrate 3 times than your phone is off OK? Next step is connect ur USB cable to PC than press only the vol up button !!!!!! not the power button!!!!!! and then connect ur phone with the USB cable so then just make fastboot flash bootimage Form a Rom of your choice vor stock firmware
Sent from my Xperia Z2 using XDA-Developers mobile app
Click to expand...
Click to collapse
After I press vol+ and connect to pc , the led become red then turn off ,flashtool still appear device connected but usb debug off. I heard that only the led turn into green from red then the flashtool can flash a rom , but now ,only red led .
Oh damn did u try alsovolume down ?
Sent from my Xperia Z2 using XDA-Developers mobile app
der-cyanoge said:
Oh damn did u try alsovolume down ?
Click to expand...
Click to collapse
sure,still nothing happen.
liam gao said:
sure,still nothing happen.
Click to expand...
Click to collapse
So how did u brickd ur device ? Maybe i can find a solution
Sent from my Xperia Z2 using XDA-Developers mobile app
der-cyanoge said:
So how did u brickd ur device ? Maybe i can find a solution
Click to expand...
Click to collapse
At first ,I flashed a wrong rom , the device can't stop rebooting , then I want to save the device,I use flashtool to flash an offical rom(I flashed the d8853 rom ,my device is SO-02g)after I flashed,totally brick......
liam gao said:
At first ,I flashed a wrong rom , the device can't stop rebooting , then I want to save the device,I use flashtool to flash an offical rom(I flashed the d8853 rom ,my device is SO-02g)after I flashed,totally brick......
Click to expand...
Click to collapse
Oh man thats hard but i dont think it is posiblle to destroy ur bootloader in Android so im searching for a solution
Sent from my Xperia Z2 using XDA-Developers mobile app
liam gao said:
At first ,I flashed a wrong rom , the device can't stop rebooting , then I want to save the device,I use flashtool to flash an offical rom(I flashed the d8853 rom ,my device is SO-02g)after I flashed,totally brick......
Click to expand...
Click to collapse
Have you tried the hard reset button?
Under the flap next to where the sim goes, is a tiny hole. You need a pin to press and reset.
Edit: Do you have ADB installed? Have you installed the Sony drivers. on your PC?
You also need to run the exe in the Drivers folder within Flashtool, to make sure you have correct flashomde drivers available. Installing these drivers is very difficult in Windows 10 and it require restarting the machine in safe mode, and going into the advanced settings to disable driver signature checking, this how to video is for windows 8, but you'll get the idea
All of those need to be in place before flashtool will work.
Does it go into flashmode? Make sure it's turned off, start flashtool on your pc, then hold the volume down while plugging in the usb cable. If flashtool recognises it then you can follow bilboa1's great guide. You will probably have to start from scratch, old firmware, root exploit, recovery etc etc.
Didgesteve said:
Have you tried the hard reset button?
Under the flap next to where the sim goes, is a tiny hole. You need a pin to press and reset.
Edit: Do you have ADB installed? Have you installed the Sony drivers. on your PC?
You also need to run the exe in the Drivers folder within Flashtool, to make sure you have correct flashomde drivers available. Installing these drivers is very difficult in Windows 10 and it require restarting the machine in safe mode, and going into the advanced settings to disable driver signature checking, this how to video is for windows 8, but you'll get the idea
All of those need to be in place before flashtool will work.
Does it go into flashmode? Make sure it's turned off, start flashtool on your pc, then hold the volume down while plugging in the usb cable. If flashtool recognises it then you can follow bilboa1's great guide. You will probably have to start from scratch, old firmware, root exploit, recovery etc etc.
Click to expand...
Click to collapse
I installed all the drivers correctly , hard reset yellow does nothing. Now I use window7 to save my phone , I have found sth. useful. The device cpu send sth. about QHSUSB_BULK driver . Which means the the most basic software had lost. Now I am searching for the device bootloader .
der-cyanoge said:
Oh man thats hard but i dont think it is posiblle to destroy ur bootloader in Android so im searching for a resolution
Click to expand...
Click to collapse
I think bootloader must be wrong.Today ,when I connected to pc . The information QHSUSB_BULK driver need to install appeared,which means the basicest software in my phone had lost.
liam gao said:
I think bootloader must be wrong.Today ,when I connected to pc . The information QHSUSB_BULK driver need to install appeared,which means the basicest software in my phone had lost.
Click to expand...
Click to collapse
Thread here lists installing QHSUSB driver, worth a go perhaps?
There is a thread dedicated to rescuing hardbrick devices
liam gao said:
My z3compact became a brick. I can't turn on it . When I connect to computer , I can't use flashtool to flash a rom because "usb debug off"appear . When I use pc companion to repair , it can't detect my phone though I enter the volume- for a long time . When my phone connect to flashtool , the red led can turn on for several seconds ,then it turn off ,green led never turn on! When I plug in , nothing happen . I don't know how to deal with my phone .Can someone help me?
Click to expand...
Click to collapse
Exactly the same happened to me this morning. I had not time so I left it and came back at midday. After trying to reset it many times it finally turned on (maybe 15 min trying), but the USB port completely died... Then I notices son humidity in the two cameras crystals. The phone was working great, I even play asphalt 8 for 20 min and nothing wrong happened. I've just sent it to repair. Tech guy told my that maybe the motherboard is compromised.
The only thing I can surely tell you is keep trying, it worked for me.
My phone unsuddenly bricked after I reboot my phone.Can't even boot into recovery cause Sony logo appear for a second and turned off.My phone even don't charge.I tried to flash stock rom via flashtool but phone not detected or after pressing vol down button nothing happened.I also tryed to use fastboot mode to flash boot.img but nothing happened though My phone can turn into fastboot mode.What should I do now?Senior XDA members please help.:crying:
Edit:how can i fix adb "device not found" issue?I installed all the necessary drivers but still not solved. Can't flash stock rom because vol down button not working but the button is fine.
Edit2:How can I fix adb driver issue that not recognizing my phone?
Problem solved!
Maybe died flash boot
Chum.zuizui said:
Maybe died flash boot
Click to expand...
Click to collapse
So is that mean my phone hard bricked?
Røbin said:
So is that mean my phone hard bricked?
Click to expand...
Click to collapse
Yes.i think so
Chum.zuizui said:
Yes.i think so
Click to expand...
Click to collapse
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.
Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that
Røbin said:
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.
Click to expand...
Click to collapse
Yes.good luck for you
hagar006 said:
Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that
Click to expand...
Click to collapse
ZR driver exist in Sony developer website and I installed the driver but I don't know why my computer not recognizing my phone.My phone can turn into fastboot mode(blue light on when pressing vol up and connecting cable to pc) but when I type command "adb devices" the listed device is empty I mean no adb fastboot device found.I'm just asking the drivers are not working beacuse of windos 10?Actually when after I use custom rom I couldn't connect my phone to pc.So any driver can fix this problem?I searched really hard on google but couldn't find any proper sloutions.
Chum.zuizui said:
Yes.good luck for you
Click to expand...
Click to collapse
This isn't helping!
Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there
hagar006 said:
Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there
Click to expand...
Click to collapse
I know you are trying to help me but I tried everything and nothing is working.I installed driver from flashtool but still no clue why pc not recognizing my phone.My phone is like a live junk.My phone soft bricked many times and I could recover my phone with flashtool so I know what to do but this problem is way more confusing.I just need to know what is causing this issue.
You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..
hagar006 said:
You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..
Click to expand...
Click to collapse
Flashtool is the best tool to recover soft bricked phone I know but this problem is way more complicated.
Thanks that you tried to help me.I hope I'll figure it out some time later.
Røbin said:
This isn't helping!
Click to expand...
Click to collapse
I dont meant it like that .did you fix it
Chum.zuizui said:
I dont meant it like that .did you fix it
Click to expand...
Click to collapse
Unfortunately no.For some reason pc not detecting fastboot device even after I installed fastboot driver.
same problem plz help
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone
pralay445 said:
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone
Click to expand...
Click to collapse
My problem was created because local charger damaged my phone battery.So I couldn't turn on my device like yours.I replaced the battery and charger from Sony Center and now my phone is good as new.So Try to use other good battery(small or similer size that suites to your phone's battery pin)and see if your phone turns on without any issue.Then you can target the problem.
Hello friends!! I have my phone in hard brick. It all started when I unlocked the bootloader by Motorola code. The fastboot process ended well, but I made a mistake. When the process finished remove the usb cable before the phone was restarted, but I did not write "fastboot reboot". Now it does not recognize the phone via usb and only the led light blinks. So, I have seen that it can be restarted via sd memory, but I don't get the mmcblk0.img for the xt 1800 Sanders model. Any other solution? Thank you very much and greetings from Argentina!
lokochris said:
Hello friends!! I have my phone in hard brick. It all started when I unlocked the bootloader by Motorola code. The fastboot process ended well, but I made a mistake. When the process finished remove the usb cable before the phone was restarted, but I did not write "fastboot reboot". Now it does not recognize the phone via usb and only the led light blinks. So, I have seen that it can be restarted via sd memory, but I don't get the mmcblk0.img for the xt 1800 Sanders model. Any other solution? Thank you very much and greetings from Argentina!
Click to expand...
Click to collapse
Sure brother
1st thing if u remove cable without fastboot reboot cmd
Then this is not the reason of bricking ur device
U manually rebooted ur device
2nd thing u can recover ur device
Just follow the thread i am dropping the link below
https://forum.xda-developers.com/moto-g5s-plus/how-to/batch-scripts-sanders-unbrick-flash-t3895165
Reply if u have any doubt
Wadu192 said:
Sure brother
1st thing if u remove cable without fastboot reboot cmd
Then this is not the reason of bricking ur device
U manually rebooted ur device
2nd thing u can recover ur device
Just follow the thread i am dropping the link below
https://forum.xda-developers.com/moto-g5s-plus/how-to/batch-scripts-sanders-unbrick-flash-t3895165
Reply if u have any doubt
Click to expand...
Click to collapse
thanks for answering. The problem that I have that the PC does not recognize the cell phone via usb, I cannot even enter the booloader using the power + volume buttons -. Now if I disconnect the battery, it connects and disconnects constantly, but does not recognize it