Database Develop

Help!!

when i connect my phone with PC i get orange light(LED) and when i open s1tool(to see is my phone already have unlocked bootlaoder) i turn off my phone and press back button but nothing happened except phone starts to charge....
pls help
date code:11W19

8cpaiw said:
when i connect my phone with PC i get orange light(LED) and when i open s1tool(to see is my phone already have unlocked bootlaoder) i turn off my phone and press back button but nothing happened except phone starts to charge....
pls help
date code:11W19
Click to expand...
Click to collapse
Make Sure you PC have Gordon Gate Flash Driver Installed dude .
Download Here

8cpaiw said:
when i connect my phone with PC i get orange light(LED) and when i open s1tool(to see is my phone already have unlocked bootlaoder) i turn off my phone and press back button but nothing happened except phone starts to charge....
pls help
date code:11W19
Click to expand...
Click to collapse
What exactly are you trying to do? Unlock bootloader? To get into your phone flash mode, you need to turn off your phone, then hold the Back button and plug in the USB cable at the same time!
If you previously able to connect your USB cable to your PC, you don't need golden gate driver. PM if you need further help!

saintckk said:
What exactly are you trying to do? Unlock bootloader? To get into your phone flash mode, you need to turn off your phone, then hold the Back button and plug in the USB cable at the same time!
If you previously able to connect your USB cable to your PC, you don't need golden gate driver. PM if you need further help!
Click to expand...
Click to collapse
He Just trying to Check whether His Phone Already Unlock BL Or Not.
If you previously able to connect your USB cable to your PC, you don't need golden gate driver.
Click to expand...
Click to collapse
I See, so No Need to install Gordon gate driver for flashing any SE Phone?
In My Case, Same Problem Happen to me before, But i install gordon gate Flash driver, it work fine.

thanks guys!!!
no my bootloader isn't unlcoked and i don't want to unlock it (because some guy tried to unlock his bootloader wizh 11W08 and all he got is HARD BRICK)

8cpaiw said:
thanks guys!!!
no my bootloader isn't unlcoked and i don't want to unlock it (because some guy tried to unlock his bootloader wizh 11W08 and all he got is HARD BRICK)
Click to expand...
Click to collapse
U're welcome dude
11w19? I think 11w19 is Safe to Unlock BL,
But just make sure of it.
Search for other sticky thread, and warning thread,
Before u done anything wrong.

Serious problem.Phone not booting!

My phone unsuddenly bricked after I reboot my phone.Can't even boot into recovery cause Sony logo appear for a second and turned off.My phone even don't charge.I tried to flash stock rom via flashtool but phone not detected or after pressing vol down button nothing happened.I also tryed to use fastboot mode to flash boot.img but nothing happened though My phone can turn into fastboot mode.What should I do now?Senior XDA members please help.:crying:
Edit:how can i fix adb "device not found" issue?I installed all the necessary drivers but still not solved. Can't flash stock rom because vol down button not working but the button is fine.
Edit2:How can I fix adb driver issue that not recognizing my phone?
Problem solved!

Maybe died flash boot

Chum.zuizui said:
Maybe died flash boot
Click to expand...
Click to collapse
So is that mean my phone hard bricked?

Røbin said:
So is that mean my phone hard bricked?
Click to expand...
Click to collapse
Yes.i think so

Chum.zuizui said:
Yes.i think so
Click to expand...
Click to collapse
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.

Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that

Røbin said:
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.
Click to expand...
Click to collapse
Yes.good luck for you

hagar006 said:
Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that
Click to expand...
Click to collapse
ZR driver exist in Sony developer website and I installed the driver but I don't know why my computer not recognizing my phone.My phone can turn into fastboot mode(blue light on when pressing vol up and connecting cable to pc) but when I type command "adb devices" the listed device is empty I mean no adb fastboot device found.I'm just asking the drivers are not working beacuse of windos 10?Actually when after I use custom rom I couldn't connect my phone to pc.So any driver can fix this problem?I searched really hard on google but couldn't find any proper sloutions.

Chum.zuizui said:
Yes.good luck for you
Click to expand...
Click to collapse
This isn't helping!

Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there

hagar006 said:
Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there
Click to expand...
Click to collapse
I know you are trying to help me but I tried everything and nothing is working.I installed driver from flashtool but still no clue why pc not recognizing my phone.My phone is like a live junk.My phone soft bricked many times and I could recover my phone with flashtool so I know what to do but this problem is way more confusing.I just need to know what is causing this issue.

You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..

hagar006 said:
You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..
Click to expand...
Click to collapse
Flashtool is the best tool to recover soft bricked phone I know but this problem is way more complicated.
Thanks that you tried to help me.I hope I'll figure it out some time later.

Røbin said:
This isn't helping!
Click to expand...
Click to collapse
I dont meant it like that .did you fix it

Chum.zuizui said:
I dont meant it like that .did you fix it
Click to expand...
Click to collapse
Unfortunately no.For some reason pc not detecting fastboot device even after I installed fastboot driver.

same problem plz help
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone

pralay445 said:
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone
Click to expand...
Click to collapse
My problem was created because local charger damaged my phone battery.So I couldn't turn on my device like yours.I replaced the battery and charger from Sony Center and now my phone is good as new.So Try to use other good battery(small or similer size that suites to your phone's battery pin)and see if your phone turns on without any issue.Then you can target the problem.

Problem after miflash

Hey guys, I need your help, I bricked my phone yesterday, and trying to solve it I used miflash, but now that the process finished my phone only vibrate and show a green light and then start a loop , and my pc wont recognizes my phone, somebody can help me please?
sorry for my bad english

Could you give more info? Which phone, what bricked the phone, bootloader locked/unlocked, what do you see in device manager on your PC?
Are you able to go into fastboot?
There's another user dealing with a bricked phone currently here, see if anything there helps you out. Link: https://forum.xda-developers.com/zuk-z2-pro/help/zuk-z2-booting-anymore-restore-t3539804

Uivalf39 said:
Could you give more info? Which phone, what bricked the phone, bootloader locked/unlocked, what do you see in device manager on your PC?
Are you able to go into fastboot?
There's another user dealing with a bricked phone currently here, see if anything there helps you out. Link: https://forum.xda-developers.com/zuk-z2-pro/help/zuk-z2-booting-anymore-restore-t3539804
Click to expand...
Click to collapse
So in the last days I bricked my z2 pro by closing the bootloader with a custom installed, and to solve the problem I put it in EDL mode and I used the flash mi, but now when I press the power button it just vibrates and flashes a green Led, but it does not turn on, I already tried several combinations of buttons to get into fastboot and nothing, and when I plugged the usb into the pc it shows nothing

P9 Hard Bricked - No recovery, no fastboot

Hi,
First i'm sorry for my bad english.
I've a P9, and i tried to update to Nougat. But something went wrong, and now, i can't boot my phone, no recovery no fastboot. When i plug it on my pc, my phone is recognize as "USB SER". How to unbricked ?

Hold volume down + power for 15 seconds, hold it even longer to try to get into fastboot mode. Was the battery low? Maybe you need to charge the phone up.

My phone is charged.
I tried your solution, but didn't work..

theoh88 said:
My phone is charged.
I tried your solution, but didn't work..
Click to expand...
Click to collapse
Put rescue firmware in dload folder in sd card and boot and hold power + and -...

rayman95 said:
Put rescue firmware in dload folder in sd card and boot and hold power + and -...
Click to expand...
Click to collapse
It only boots to fastboot from adb shell or if i plug it in my computer and hold vol down + power if i dont plug it in it will not boot into fastboot.

I don't have access to fastboot or recovery. I have black screen, when i try all combinations. When it's plugged, it's only recognized as " USB SER "

theoh88 said:
I don't have access to fastboot or recovery. I have black screen, when i try all combinations. When it's plugged, it's only recognized as " USB SER "
Click to expand...
Click to collapse
Even with Pwr + - buttons hold for 5 or 10 secs????

rayman95 said:
Even with Pwr + - buttons hold for 5 or 10 secs????
Click to expand...
Click to collapse
Yes, nothing happens

Hold Vol Down while inserting a USB cable connected to your computer, assuming you have one.

Yes, i have a computer. I tried to insert usb cable with vol down, but my phone is always recognized as USB SER

theoh88 said:
Yes, i have a computer. I tried to insert usb cable with vol down, but my phone is always recognized as USB SER
Click to expand...
Click to collapse
Hey mate, did you find a solution, same thing happened to me ... the only thing I get from the phone is "USB SER" ... never unlocked, rooted or flashed my phone. Could be a hardware failure?

AneirinIV said:
Hey mate, did you find a solution, same thing happened to me ... the only thing I get from the phone is "USB SER" ... never unlocked, rooted or flashed my phone. Could be a hardware failure?
Click to expand...
Click to collapse
No, i found nothing...

How did you try to update to nougat? Can you boot into erecovery?

theoh88 said:
Hi,
First i'm sorry for my bad english.
I've a P9, and i tried to update to Nougat. But something went wrong, and now, i can't boot my phone, no recovery no fastboot. When i plug it on my pc, my phone is recognize as "USB SER". How to unbricked ?
Click to expand...
Click to collapse
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial

zgfg said:
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Click to expand...
Click to collapse
I already tried DC phoenix, but my phone isn't recognized so i can't use it

Hi,
After hours of search, i found a python program for honor 4C. This program can communicate with p9 with usb serial port. So, i got Linux on my pc, tried to be familiar with python.
Now, i need some information:
startframe
headframe
bootheadaddress
bootdownloadaddress
If guys can give me this information or tell me where to find them, please leave reply !

My phone is the same with yours. Waiting for good news from you. Try this solution, i dont have this tool.

Could somebody find firmware with testpoint for eva-l09 ?

Hey mate I managed to revive my phone ... it had to be something hardware related. I opened it up, disconnected the battery cable for a couple of minutes, reconnected and re-screwed everything and it turned on. I didn't even lose any data.

Same trouble
Hi every body 'im so sorry for my english, i'm french...
Could some one please help me, i've tryed to restore a mate 10 pro who as in demo mode but i made a mistake with a "update.zip" file and now the phone is always off, no fastboot or recovry mode, the phone stay off when i press the power bouton. when i plug the USB cable, it appear "USB SER" only.
Thanks for your attention

X620 bricked/ hard bricked after TWRP update by fastboot commands from 3.0 to 3.1

Hi,
Today i bricked/hard bricked my X620. I had TWRP 3.0.x, but i decide to flash with 3.1.x. I made it through by commands in windows using twrp.img file, and finished with fastboot reboot command, and phone died. Last info was something with the flow. I read many threads, and i found, that it's not alowd to finish flashing with this command. Now, im not able to switch on my phone, enter fastboot or TWRP, and when i conect my phone to pc, red light apears and i can hear a sound i win7 that something has been connected to pc, and disconnect, and connected, disconnected ...................., and nothing i happening with the phone. So, i'm not able to connect my phone to pc to make new flash by flash tool.
Can somebody help me with this problem????
Q

I can help you, just visit my blog
tickernel.tk

Present status
QbaQbaPL said:
Hi,
Today i bricked/hard bricked my X620. I had TWRP 3.0.x, but i decide to flash with 3.1.x. I made it through by commands in windows using twrp.img file, and finished with fastboot reboot command, and phone died. Last info was something with the flow. I read many threads, and i found, that it's not alowd to finish flashing with this command. Now, im not able to switch on my phone, enter fastboot or TWRP, and when i conect my phone to pc, red light apears and i can hear a sound i win7 that something has been connected to pc, and disconnect, and connected, disconnected ...................., and nothing i happening with the phone. So, i'm not able to connect my phone to pc to make new flash by flash tool.
Can somebody help me with this problem????
Q
Click to expand...
Click to collapse
Is it solved? I am also facing same problem.

BiswashKoirala said:
Is it solved? I am also facing same problem.
Click to expand...
Click to collapse
I am facing the same problem as well. Can anybody help pls??

No..I tried few solutions but the phone was still dead. So I bought a new phone.