Every time I flash to any cyanomod (cm7 or cm9) and I dial area codes (+1-122-232-2222) the call just ends and doesn't go through but i receive calls with the area code showing. I also tried without the +1, with +0, 0 in the beginning, and just the area codes in the beginning.
Anyone know what is wrong?
Related
I have gotten voip working on my device and can make local calls and get calls with out an issue. However, if I try to call a number in St. Vincent (I'm in the US) the call looks like it is being placed, then dumps me back to the today screen. I can see the call is still in action, the little phone at that top of the screen, but there is no sound at all.
I am able to dial local numbers in 5,7,10, and 11 digit forms; so I do not think it is my dialplan.
Has anyone else experienced this or have a solution? I have included my ipdialplan.xml file just in case that is the issue.
Today I tried to call a customer service number for a business on my Captivate - you know the ones, press 1 for English
Anyway, once I made the call, I figured out how to and pulled up the dial pad within the call and hit the number for my selection... Nothing happened. I tried this multiple times and the computer on the other end acted like I didnt do anything. I tried calling my cell providers customer service knowing they had a similar system, and they too couldnt recognize my key strokes to enter my mobile number.
Has anyone else had this problem? Its like the phone isnt broadcasting the tones over the line while dialing or something. Am I doing it wrong, or is this just a problem my phone has? Very odd...
~T.J.
Mine works fine. I use it everyday to check my work voicemail.
I don't have any issues dialing within a call either.
Sent from my SAMSUNG-SGH-I897 using XDA App
Havent had that issue yet on my phone.
works fine here
Works fine for me.
02CWRX said:
Today I tried to call a customer service number for a business on my Captivate - you know the ones, press 1 for English
Anyway, once I made the call, I figured out how to and pulled up the dial pad within the call and hit the number for my selection... Nothing happened. I tried this multiple times and the computer on the other end acted like I didnt do anything. I tried calling my cell providers customer service knowing they had a similar system, and they too couldnt recognize my key strokes to enter my mobile number.
Has anyone else had this problem? Its like the phone isnt broadcasting the tones over the line while dialing or something. Am I doing it wrong, or is this just a problem my phone has? Very odd...
~T.J.
Click to expand...
Click to collapse
You're not going home and re-entering the dialer program are you?
The best way is to go to speaker phone so you can hear it then hit dial pad from the call screen.
If you go to the home screen you are still in the call but hitting the phone icon will let you find or edit contacts, but will not broadcast unless you hit the call button but I don't think it will broadcast to the active phone call, it would likely try to start a 3-way.
from the home screen you must return to the call from the status bar.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
The problem seems to have fixed itself, as it worked the next day to dial an extension to get a hold of my girlfriend at work. Very odd. My procedure was to dial the number, then while in the call look at the screen and hit the button for "dial pad' which of course brings it up. Then, enter the numbers I needed to enter.
~T.J.
I have had this before on another phone
It was likely because of a bad signal. It was just strong enough to reveive the signal but not strong enough to have your phone communicate to the tower. Thus on the other side of the line they never got the tones even though they were being dialed. Considering it did not happen again it appears this is the most likely cause.
Every time I flash my phone to CM7 or CM9 I cannot call numbers including the area code. It just ends right away. I have to call without the area code. All my contacts have 1-area code because that's the only way i can send text messages. It doesn't work without the area codes. So I end up re-flashing to stock roms.
Is there a way to use area codes when calling numbers using the CM roms.
Hi,
I'm using Xperia Z1 purchased in India currently using in brazil.
I face a very annoying issue whenever I try to call any number with the state code and country code '014' gets added automatically to the number and the call does't connect. I looked at the settings there are no such options to block this. This issue doesn't happen when I call local numbers without the state/country code.
For example when i dial +55-61-12345678 it changes automatically to 014-61-12345678 and it says that number does not exist. I face this problem even when I dial 0055 instead of +55, it also exists for all the country codes. I also tried a complete factory re-set but this problem still persists. If anyone could help me it would be great.
Thanks in advance
arvind2601 said:
Hi,
I'm using Xperia Z1 purchased in India currently using in brazil.
I face a very annoying issue whenever I try to call any number with the state code and country code '014' gets added automatically to the number and the call does't connect. I looked at the settings there are no such options to block this. This issue doesn't happen when I call local numbers without the state/country code.
For example when i dial +55-61-12345678 it changes automatically to 014-61-12345678 and it says that number does not exist. I face this problem even when I dial 0055 instead of +55, it also exists for all the country codes. I also tried a complete factory re-set but this problem still persists. If anyone could help me it would be great.
Thanks in advance
Click to expand...
Click to collapse
This could be an issue from your SIM. 014 is one of Oi's long distance codes; Oi has a setting (on the SIM menu) to add its long distance code to any number you dial. So, it is intercepting the call and changing it to use Oi's code. Your best bet would be to enter the SIM menu and try to disable that option, and add the operator code manually to any number you dial.
Do a lot of conference calls and have all numbers set dial access codes and pins using the (p) Pause. With LP they do not fully send when automated system repeats what was sent was never the full number. Example 8778741777,,,,1234567890#
The systems might just get 1234567 of the access code and this is for all company numbers I call.
Anyone have same experience?
Anyone have a fix?
parcou said:
Do a lot of conference calls and have all numbers set dial access codes and pins using the (p) Pause. With LP they do not fully send when automated system repeats what was sent was never the full number. Example 8778741777,,,,1234567890#
The systems might just get 1234567 of the access code and this is for all company numbers I call.
Anyone have same experience?
Anyone have a fix?
Click to expand...
Click to collapse
What rom are you using? It works for me on stock and on slimlp, our systems use webex which i dial into and have to use codes and they work fine.
Was using LS and now on Chroma but happened to me on stock... What I did to slow it down was put a (p) after 3 numbers seems it was sending it too fast for that system to handle...so think its now a phone issue more so how the other end was getting to numbers.
Thx for the reply
Same issue for me, using Chroma ROM and the latest radio (MDM9625_104446.01.02.95R). Not only are pauses not recognized, generally dialing digits after connection does not work. Huge issue, might try reverting the radio.
swamp2 said:
Same issue for me, using Chroma ROM and the latest radio (MDM9625_104446.01.02.95R). Not only are pauses not recognized, generally dialing digits after connection does not work. Huge issue, might try reverting the radio.
Click to expand...
Click to collapse
I seem to have found a reliable way to correct this. Was playing around with VoLTE and found this to be a contributor. If you have VoLTE enabled in 5.1 ROM, that is under Settings>Wireless&networks>More>Cellular networks>Enhanced 4G LTE Mode. When I turn off this option, post connected call digit dialing seems pefect. Switching it back on goes right back to not able to recognize.