[Q] Vodafone ROM on Orange Branded Phone - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi,
I have an Orange branded Samsung Galaxy S that is being used on the Vodafone network. This all works find except for Data. The button from the drop down menu can't even be pressed/hilighted and 3G never shows on the status bar. We've tried putting an Orange sim in and data works fine with that but not with the Voda one.
Is this a conflict between the Orange Phone and Voda network and do I need to (or can I even) flash a Vodafone stock ROM in place of the Orange one?
Sorry if this has been asked before but I've searched and can't find an answer. Thanks for any help.

Either call up Vodaphone and ask them to send your APN settings or search their website or the net. Theses are the settings that tell the phone where to link to and which network you belong. The phone is probably trying to link to the Orange data network but obviously being rejected.

Thanks but we have tried that and it's all set up for Vodafone. That's why I couldn't understand that the orange sim connected straight away.
Sent from my HTC Desire HD A9191 using XDA

Hmm.. Have you asked if Vodafone has activated your data or de-activated it...
Also try going to the settings menu and make sure 3g data is enabled, and if it is maybe also check data roaming.
Lastly yes you should be able to flash a Vodafone stock rom on the phone as all it provides is the Vodafone bloatware. All the specs are the same in the device so there shouldn't be a conflict.

Thanks, I'll contact Vodafone again. Although I'm not holding out much hope, they seem to have as much technical knowledge as a 3 year old. The last one told me I would have to switch WiFi off before it would switch to 3g when out of range.
Thanks for your help
Sent from my HTC Desire HD A9191 using XDA

Related

Orange UK Kaiser with Vodafone SIM

I've got an Orange UK Kaiser and it was working nicely. Then I had it unlocked using the service from http://www.imei-check.co.uk. I can use a Vodafone SIM to call and text without any problem. However when I tried to use 3G connection to browse the internet, it automatically tried to connect via Orange Internet and then failed, not surprisingly. So, how can I set up the phone to use Vodafone's 3G network instead of Orange's? It seems I can set up a new connection but I have not a single clue how to do it. I apologise if this is already asked and answered on the forum, I really couldn't find it. So, could anybody please point me to the right thread, or tell me how to solve the problem? Many many thanks.
Just google for vodafone's GPRS connection settings and either create a new connection or replace the orange one's details in start, settings, connections tab, connections.
problem solved, many thanks for the help.

Why im Roaming with AT&T phone + BELL / TELUS SIM

Hi,
I would like to be able to modify my AT&T radio and change the default Mobile Network Code for my carier, is there any software to make easy to modify the ROM file ?
Thank
I'm not quite sure I understand what you're asking, but a radio will work on various different networks, depending on which SIM card you have in the phone. So I'm not sure that it's in the radio that you need to look.
What is it that you're trying to achive exactly, why do you want to change this code ?
Well, here is my problem;
I bought a Tilt 2 on ebay, and I also get an Unlock code for it. I have inserted my Bell SIM and the phone work correctly. I have configured the APN setting correctly and now I have internet without any problem.
The only bad thing is that the phone always think i'm in roaming, but that's not true. I have to deactivate all setting about roaming check, it's not a big thing but If I got to USA I will be charged for real roaming. and another downside is that many application pup info about roaming and data charge.
I'm searching since couple days to found a solution, and I'm pretty there is one but I have not enough knowledge on programming stuff. I've look all every registry in my phone and no one can't correct this ''roaming'' situation.
That's why im turning to Radio, since this phone is an AT&T, it's propbably seaching to compare SIM network provided and ROM network. I've found an interesting site about MMC/MNC http://en.wikipedia.org/wiki/Mobile_Network_Code
and found that the default network for AT&T is 310-410. Here in Canada We have bell and telus that use same technology then AT&T (UMTS 850 / UMTS 1900).
I would like to change the default ''home'' network code to 302-880. because my Sim Provided IMSI is 302-610 (Bell).
So to make it short. I want to change the default ''HOME'' network 310-410 to 302-880 so the phone will not be in a roaming profile.
Hope that someone can help me, and I'm pretty sure many people will appreciate this fix.
Thank You.
I don't know much about this, but surely it's your SIM card that is providing this code ? Since I could buy an unlocked Tilt 2 and put my own SIM card in it, and use it fine here in the UK on a UK network.
I can't believe that your phone thinks it's roaming just because it's a Tilt 2.
Yes, I found in my registry ProvidedIMSI="302610" that is the SIM registred network 302610 Bell HSPA network. So my SIM is telling the phone to use this network, but there is something in the phone that say it's roaming and not a home network. and I need to find and change this.
I'm not the only one in this situation and i would like to find a fix.
i have no knowledge about this only thing i can think of at the moment is just change the current radio version and flash a new rom. the latest version for radio is
4.49.25.95
and is found here ------> http://forum.xda-developers.com/showthread.php?t=549939
follow the right steps. [:d]
best of luck
Yes, I've updated the Radio to the latest version and still have the problem of ROAMING. i've try 2 old radio and always got the roaming icon.
Any other input will be accepted!!
Thanks
BiOs2k said:
Yes, I've updated the Radio to the latest version and still have the problem of ROAMING. i've try 2 old radio and always got the roaming icon.
Any other input will be accepted!!
Thanks
Click to expand...
Click to collapse
I read somewhere that roaming starts when you are out of your area code range.
But you can try this too
go to ------> setting ---> personal ------> phone -------> Network (in the bottom tabs)
In the network tab click Find Network and make sure it is the same network you are using.
Network selection should be "Automatic".
Now in next tab BAND
select network type to "GSM" and GSM/UMTS band to "Auto".
Try this and let me know if this work else i will ask somebody knowledgeable like Sir Phunkee
the show stopper said:
I read somewhere that roaming starts when you are out of your area code range.
But you can try this too
go to ------> setting ---> personal ------> phone -------> Network (in the bottom tabs)
In the network tab click Find Network and make sure it is the same network you are using.
Network selection should be "Automatic".
Now in next tab BAND
select network type to "GSM" and GSM/UMTS band to "Auto".
Try this and let me know if this work else i will ask somebody knowledgeable like Sir Phunkee
Click to expand...
Click to collapse
I've play with these setting and nothing seem to work.
But maybe I found something interesting.
I've just test the phone with a ROGERS SIM card and I get 3G signal and i'm NOT in roaming mode..
Now, What that mean ? Rogers 3G is UMTS/HSPA 850/1900MHz same as BELL.
Why it say Roaming when phone is connected to BELL with BELL Sim and not on ROGERS SIM??
Could someone help me with that ? fix, cab, anything ?
Thanks
rooming
Hi
I do not know think you want to do with your tilt 2
Why you don't do a hard SPL and install a cocked rom !! as energy
I am using a tilt purchased from AT&T without contract
I get a unlock cod from the internet then I do a hard SPL it and install the energy rom in, is work like a charm with Rogers, without any problem( only the gps wish I never try
Perhaps this is can resolve your problem you should try
thanks
Already done Cjoco My Tilt 2 is Unlocked and Hard-SPL with latest EnergyROM.
Like I said before, SIM ROGERS work like a charm in my phone, No roaming warning. but with BELL and TELUS SIM I get the Roaming notif but it's not true, Im connected to BELL and VOICE,DATA,etc. work #1.
People say that it work with ROGERS because this carrier have a fallback signal if 3G is not available, with BELL if I lose 3G signal my phone doesn't work.
BiOs2k said:
I've play with these setting and nothing seem to work.
But maybe I found something interesting.
I've just test the phone with a ROGERS SIM card and I get 3G signal and i'm NOT in roaming mode..
Now, What that mean ? Rogers 3G is UMTS/HSPA 850/1900MHz same as BELL.
Why it say Roaming when phone is connected to BELL with BELL Sim and not on ROGERS SIM??
Could someone help me with that ? fix, cab, anything ?
Thanks
Click to expand...
Click to collapse
then i think problem is with your sim card not with your phone. Just get your sim card replaced and i am sure the problem would be resolved.
the problem may be with his sim card, but im not sure replacing it will fix anythibng. im also with bell and have the same problem on my fuze.
bios2k, how old is your sim card?
bobzero My SIM card is 2 Week Old. so, i'm not sure it because my SIM is old.
I'll give a call at tech support @ BELL to see if they know why it doing this. I'm not sure if they will be enough good to explain this situation.
I've read last night on many forums the RILPHONE.DLL could be a possible cause of our problem.
In my config I can select GSM(850,1700) + UMTS(850,1700) but there is no option to select UMTS only. so maybe the phone is searching for GSM first (rogers) that's why when I insert a ROGERS SIM my phone is not roaming.
Is there a way I can extract RILPHONE.DLL for our EnergyROM or Stock Tilt 2 rom. Maybe I can ask a Programmer to take a look at this DLL to see the code.
I'll let you know.
I've just talk with BELL technical support and they have no idea why I'm the phone say it's in ROAMING. I've talk to the billing department and they say I don't have any ROAMING fees, so nothing to worry about..
Now, I'm still at the same state = no solution
Same here.
I was checking around and found many got this problem, including BBs. Now, some claimed that after upgrading the O/S for his BB, it went away. Another person with different device upgraded his O/S and started having that problem, and it wasn't there with stock ROM.
Make me think it has to do with the software side of thing and nothing to do with SIM or radios. To pinpoint what is causing it, can be a tough task though.
scooper True, Hard task for people that don't know much about programming ROM and files, but maybe we can have help from other that wanna look at our problem.
I'm available to test if someone want to Help us .
BiOs2k said:
scooper True, Hard task for people that don't know much about programming ROM and files, but maybe we can have help from other that wanna look at our problem.
I'm available to test if someone want to Help us .
Click to expand...
Click to collapse
You should try to change the radio and rom of your phone. Make sure to Task 29 b4 flashing. Another thing to make sure is you use the right radio, i mean the specific radio for telus, t-mobile or att.....
Wrong radio can also cause such problems.
I have the same issue with my Unlocked Tilt2 on Telus. I found a lot of people with unlocked winmo devices on bell/telus complaining of this problem and never have seen a solution. People say that a Fido sim will do the same thing. Only Rogers sims seem to not show roaming. PLEASE post if you find the solution or even cause of this.
I just did task29 and reflash ROM. I soon as I have the main menu Roaming Icon appear on top just beside or 3G.
Damn!! still stock with this roaming issue
anyone have Q's ?

[Q] Lost internet connection

Hope Someone can help me and its a sinple fix
Me and the family have just moved to Western Australia from the UK
I was on Vodafone in the UK and purchased a Vodaphone sim in Oz
When putting it in the phone all works well (sms and calls) but no internet
I bought the same sim for my wifes phone (HTC Desire Z) and she gets sms, calls ad internet
I thought maybe its the sim but i swapped them over and the same thing, she has everything on my sim and i only have sms and calls on her sim
Ive tried the turning on mobile data in the settings and that did nothing
Ive rebooted so many times i cant remember how many
Im thinking it maybe time to get a new phone and get rid of the 2X
Hope someone can help
Mark
This should be easy to fix. You need to create an APN for your network. Usually this can be done by visiting your providers home-page, look for something resembling "Internet and MMS-settings" and follow the instructions. Some providers send the settings directly to your phone via SMS, some install them via 3rd party tools, some require them to be entered manually. This should be all you need to do.
Check your APN settings
Sent from my LG Optimus 2x using XDA Premium App

Droid 3 In Australia

Hey, I'm in Australia (GSM) and I purchased a Motorola Droid 3 (XT862) from America a few months ago.
Should I have bought the XT860 (GSM version)?
I was with Optus but because they don't support the 850mhz network I switched to Vodafone because they had it. So now I atleast have data working on my phone after those months of not having it, but vodafone sucks, especially on this phone (text messages sometimes don't send/signal cuts out all the time) but the 3G is very good.
The phone I previously had before the Droid 3 was a HTC Tmobile G2 which I had also bought from America, and everything worked perfectly.
If I buy the XT860 will it fix everything?
On the Motorola website it says the XT862 and XT860 have the same networks... but the XT680 is supposed to be used on GSM, so would it work fine?
Sorry if I confused anyone, I'm really baked.
Thanks in advance for anyone trying to help
Maybe you could try the T-MOBILE AT&T hack?
Sent from my XT862 using XDA
i have XT 862, on GSM and it works perfectly. More than that, I use also vodafone
The xt860 (and xt883) would not be any better; all they (along with the xt862) support UTMS 850/1900/2100mHz. Thus, you probably didn't get a lot of 3G on the Optus network (which uses 900/2100mHz). The main Vodafone 3G network in Aus is 900/2100mHz, but they are in the process of rolling out an 850mHz network.
Telstra Next-G uses 850mHz (and they have 2100mHz as well, but only in cities I believe)
Anyway, in brief: If you're willing to switch to Telstra, you should get great results. If not, Vodafone is the next best option.
I have xt862 on optus in Austraia. I just stay in global mode. I did experiment around with some of the custom roms but found weirdnesses like my calls not coming thru. I went back to stock and now im going to stay on stock until cm9 reaches release. Im not having any issues on stock.
Hope this helps
Sent from my DROID3 using xda premium
MrObvious said:
Maybe you could try the T-MOBILE AT&T hack?
Sent from my XT862 using XDA
Click to expand...
Click to collapse
Just did it, I suppose it improved the situation a tiny bit, but i'm not sure.
I will do some tests on the Telstra network, see if it's better than Vodafone.
Im using the phone in Global mode atm and I'm getting a decent 3-4 bars instead of the 1 or 2 i'd normally get which excites me
And the network type is displaying HSPA.
But I cannot send text messages, everytime, it just says "Text message not sent" which is very annoying. Anyone know anything about this? When I swapped over to Vodafone from Optus I could send texts but after a point it just stopped working...
Anyone know anything about this?
thanks
So does the droid 3 bought from usa connect to data services with optus at all?
How fast is data transfer in "global" mode?
late reply i know, but I'm on TPG [Optus network] in Qld, Aus with the droid 3 XT862.
from memory, all i've done is done the 'hack' to show actual reception, rather than 1 bar. I run the phone on the global setting.
I just ran a speedtest.net check, got an internode server in Sydney. ping 139ms, DL 5241kbps, UL 1202kbps.
OP, when you were with Optus, did you go through your account settings and make sure you had 3G data turned on for your phone, etc? I'm not trying to patronise or anything, but it always helps to start with the basics when fault finding.
Regards,
Hi All,
Im also in Australia, with Vodafone, and am looking at getting myself a Droid 3 as well.
Since the phones aren't released here, what happens about software updates? Im assuming they won't happen via OTA?
Im leaning towards the XT860, rather than the XT862, any particular reason to go for either?
Thanks,
cevad
cevad said:
Hi All,
Im also in Australia, with Vodafone, and am looking at getting myself a Droid 3 as well.
Since the phones aren't released here, what happens about software updates? Im assuming they won't happen via OTA?
Im leaning towards the XT860, rather than the XT862, any particular reason to go for either?
Thanks,
cevad
Click to expand...
Click to collapse
No difference between them but the xt860 has more dedicated roms here. Both are the same phone and just build.prop edits are needed to get the phones up and running in 5 mins. OTA updates will still work anywhere tho if you root and mod your phone don't use use the OTA feature as you will screw your phone.
All you need to do select wcdma/gsm mode and manually put in your service provider APNs to get 3G. Find this on the Voda site.
Best place to find your APN is here:
http://ausdroid.net/apns/
Sent from my LT26i using xda premium
somemadcaaant said:
All you need to do select wcdma/gsm mode and manually put in your service provider APNs to get 3G. Find this on the Voda site.
Click to expand...
Click to collapse
I managed to get a xt862, but I cant get data working on optus? (live connected)
calls/text works - tried global mode, tried GSM/UMTS mode, tried manually selecting optus 3g network, made sure the data setting was enabled which is actually under "battery & data manager". Already manually input the optus apn.
what am I missing?
Do you have to do the tmobile at&t hack? running everything stock from factory; or will rooting the phone/install ics help?
I have the one bar reception bug which I read on another thread if that makes a difference.
nvm, got it to work, for some reason manually inputting an APN didnt work, had to find the optus site and send it via sms.
Speed isnt too bad.
The next problem now though is wireless hotspot. It connects but no data goes through for some reason
jjabrams said:
The next problem now though is wireless hotspot. It connects but no data goes through for some reason
Click to expand...
Click to collapse
If the xt862 is the verizon version, I have read that verizon have blocked the hotspot stuff from working.

[Q] 3G doesn't work in T-mobile

HI, GUYS,
so I just got this unlocked HTC ONE from HTC shop
and I am currently using T-mobile, but I have issues with 3g
i used to have HTC desire z and 3g works fine,
and I went to shop, change my sim card to micro sim card so that i can use it in HTC ONE
BUT, everything works perfect excepted 3g
mobile network only can find T-mobile 2g network and at&t 2g/3g/4g network when i search the network operators
and i am not going to do roaming.
I tried to change VPN but it doesn't work
I also tried tweakker, but for some reason, it kept saying my wifi didn't connect to internet but it did connect to internet..
so could somebody help me
i didn't root my phone yet, and the rom is official rom
Software number 1.29.1540.16
thanks
You're not going to like this answer, but the unlocked HTC one lacks the 1700 band needed for T-Mobile 3G. The good news is T-Mobile is in the process of reforming their network so your phone should get 3G by quarter 3 2013. Until then you could try an AT&T mvno or return it and buy one from T-Mobile that has the required bands.
Sent from my HTC One using xda premium

Categories

Resources