Need Help (About my phone) - Galaxy S I9000 Q&A, Help & Troubleshooting

I have opened thread in general section but nobody looks up..
http://www.youtube.com/watch?v=oOmxwKDMkrA
I got same bug on my i9001 for 2 days and cant fix it. What should i do ? Its really annoying i cant use my phone..

settings->applications->development->usb debug on!

XER0123 said:
I have opened thread in general section but nobody looks up..
http://www.youtube.com/watch?v=oOmxwKDMkrA
I got same bug on my i9001 for 2 days and cant fix it. What should i do ? Its really annoying i cant use my phone..
Click to expand...
Click to collapse
First of all I recomment you strongly to read this guide.
Your problems will dissapear if you enable USB Debugging
How to enable USB-Debugging:
Enter in the settings of your phone
Enter in the “Applications”
Enter in “Development”
Enable “USB-Debugging”
(from the guide)

fabsau said:
First of all I recomment you strongly to read this guide.
Your problems will dissapear if you enable USB Debugging
How to enable USB-Debugging:
Enter in the settings of your phone
Enter in the “Applications”
Enter in “Development”
Enable “USB-Debugging”
(from the guide)
Click to expand...
Click to collapse
Thank you guys
Now at least i got a usable phone
But it still goes charging, not charging, charging , not charging crazily and its really laggy
I am not using usb connection, i dont know why my phone thinks its connected and disconnected usb crazily :/

Flash custom rom or XXKQB value pack it's i think fix this!

XER0123 said:
Thank you guys
Now at least i got a usable phone
But it still goes charging, not charging, charging , not charging crazily and its really laggy
I am not using usb connection, i dont know why my phone thinks its connected and disconnected usb crazily :/
Click to expand...
Click to collapse
which rom are you using? which kernel?
is maybe your wire broken?

xewier said:
Flash custom rom or XXKQB value pack it's i think fix this!
Click to expand...
Click to collapse
Thank you
I have already flashed XXKQB rom and wiped all my data Not fixed.

fabsau said:
which rom are you using? which kernel?
is maybe your wire broken?
Click to expand...
Click to collapse
Value Pack + Skyhigh Kernel 1.4a
Wire ? I am not using usb, my phone thinks its connected , disconnected...
Charging it fixes it for 5-10 minutes and then this **** start again.
Charging ... Charging ... Charging.. (Vibrating Crazily)
Ah and Sorry for my bad english...

XER0123 said:
Value Pack + Skyhigh Kernel 1.4a
Wire ? I am not using usb, my phone thinks its connected , disconnected...
Charging it fixes it for 5-10 minutes and then this **** start again.
Charging ... Charging ... Charging.. (Vibrating Crazily)
Ah Sorry for my bad english...
Click to expand...
Click to collapse
how did you wipe your data? just a factory reset? Try please this:
6. How to format:
Do this every time before flashing a stock- or custom-rom!
Attention!
You will delete everything on your phone! Your phone will not even be able to boot! Only Clockworkmod and the Download-Mode will be left! (Your SIM-Card will be untouched)
Please make sure that you saved only your backups on another device before formatting your phone (like on your computer)
This is the best method for using the full experience of every custom rom! I recommend this method because in the past a lot of users had issues with custom roms. They had installed a lot of different custom roms before and they didn´t format their phone correctly before flashing the new rom. This caused a lot of problems
Enter in the Clockworkmod
Choose “Mounts and storage”
Select all after all
Format /system
Format /cache
Format /data
Format /system
Format /emmc
Format /sdcard
After formatting flash again the value pack, activate usb debugging and report please then your status.
If the problem does not dissapear you should send it for a repairation...

fabsau said:
how did you wipe your data? just a factory reset? Try please this:
6. How to format:
Do this every time before flashing a stock- or custom-rom!
Attention!
You will delete everything on your phone! Your phone will not even be able to boot! Only Clockworkmod and the Download-Mode will be left! (Your SIM-Card will be untouched)
Please make sure that you saved only your backups on another device before formatting your phone (like on your computer)
This is the best method for using the full experience of every custom rom! I recommend this method because in the past a lot of users had issues with custom roms. They had installed a lot of different custom roms before and they didn´t format their phone correctly before flashing the new rom. This caused a lot of problems
Enter in the Clockworkmod
Choose “Mounts and storage”
Select all after all
Format /system
Format /cache
Format /data
Format /system
Format /emmc
Format /sdcard
After formatting flash again the value pack, activate usb debugging and report please then your status.
If the problem does not dissapear you should send it for a repairation...
Click to expand...
Click to collapse
I will try now. Thank you
http://www.youtube.com/watch?v=0zmDLm8koXQ
I found this, almost same with my problem. soo annoying.

XER0123 said:
Value Pack + Skyhigh Kernel 1.4a
Wire ? I am not using usb, my phone thinks its connected , disconnected...
Charging it fixes it for 5-10 minutes and then this **** start again.
Charging ... Charging ... Charging.. (Vibrating Crazily)
Ah and Sorry for my bad english...
Click to expand...
Click to collapse
this seems to be a hardware problem.. i think your usb port is grounded.. check if there is something stuck inside... even if you flash different roms it will still detect charging.... you can have it checked in a service center just to be sure....

Related

Camera and Charging Problem

X8 running MiniCM7 2.1.9 with nAa kernal-11
Camera
First access to camera since boot, it shows blank with camera framework there.
If i exit and return back to camera, the screen is now complete blank without camera framework. There saw once i got "Could not conect to camera" error.
Charging
Charge when phone is turned off, screen appreads with battery charging image. If i press on/off button to boot up rom, it stops charging(shown in settings>about phone>phonestatus) but my LED notification shows constant red.
Battery icon shows 0%
Sometimes after boot up it discharge at 18% and after sometime(i dont know how long or maybe it keeps on repeating) the phone restarts. and turn to 0%
Could it be virus? Cause my SDcard folders' name start to change to weird symbols.
Or because i dropped my phone on the floor?
zhuhang said:
X8 running MiniCM7 2.1.9 with nAa kernal-11
Camera
First access to camera since boot, it shows blank with camera framework there.
If i exit and return back to camera, the screen is now complete blank without camera framework. There saw once i got "Could not conect to camera" error.
Charging
Charge when phone is turned off, screen appreads with battery charging image. If i press on/off button to boot up rom, it stops charging(shown in settings>about phone>phonestatus) but my LED notification shows constant red.
Battery icon shows 0%
Sometimes after boot up it discharge at 18% and after sometime(i dont know how long or maybe it keeps on repeating) the phone restarts. and turn to 0%
Could it be virus? Cause my SDcard folders' name start to change to weird symbols.
Or because i dropped my phone on the floor?
Click to expand...
Click to collapse
Have you ever try to full wipe your phone?
Try to reinstalling your ROM, maybe it will help
acoongg said:
Have you ever try to full wipe your phone?
Try to reinstalling your ROM, maybe it will help
Click to expand...
Click to collapse
Forgot to mention, i reinstalled 5-6 times the rom.
But havent data wipe.
Will the data cause these issues??
After i fix my sdcard, now the phone can be charged, but camera still dont work.
Do u have any partitions on ur SD card?that MIGHT have caused the camera issue.
thu001 said:
Do u have any partitions on ur SD card?that MIGHT have caused the camera issue.
Click to expand...
Click to collapse
no, 1 partition, FAT32, i didnt do anything to partition before this problem.
And now again the charging problem came, after i reinstall the rom.
Dont forget u need to factory reset after installing,it will only remove the stuff on ur phone not the memory card,anyway u can install em back
EDIT:Wait if i remember correctly,i used to use minicm7.2.x and after u install the kernel and rom u ALSO need to install gapps.zip files by flashing them with CWM,u better double check with the guys over at minicm thread .used to have charging problems cuz i forgot to install gapps.zip as adviced by them.
EDIT2:Yup u need to install gapps (google apps) there is a link there for you to download it,all u need to do is follow all the instruction given and it will be fine.
Sent From MT11i
zhuhang said:
Forgot to mention, i reinstalled 5-6 times the rom.
But havent data wipe.
Will the data cause these issues??
Click to expand...
Click to collapse
try to full wipe data / reformat your SD card, and install your ROM again,
Maybe it will solve your problem
Don't forget to install gapps for your ROM
acoongg said:
try to full wipe data / reformat your SD card, and install your ROM again,
Maybe it will solve your problem
Don't forget to install gapps for your ROM
Click to expand...
Click to collapse
OK, i try to do step by step what u said.
Now i cant charge. I gave up camera, i think its hardware issue.
But i need hcarge, the LED notification got light but its not charging, both USB and power AC.
zhuhang said:
OK, i try to do step by step what u said.
Now i cant charge. I gave up camera, i think its hardware issue.
But i need hcarge, the LED notification got light but its not charging, both USB and power AC.
Click to expand...
Click to collapse
did you try to revert back to Stock ROM and Kernel?
if the problems gone, i think that's not a hardware problem..
do you have somekind like travel charger? you can charge your battery if your phone won't charge..
acoongg said:
did you try to revert back to Stock ROM and Kernel?
if the problems gone, i think that's not a hardware problem..
do you have somekind like travel charger? you can charge your battery if your phone won't charge..
Click to expand...
Click to collapse
no travel charger.
i havent did what u said previously, cause now my phone no battery, i cant boot up, im trying to get it charged but it wont work.
the phone is now unchargable. WTH is this problem???
zhuhang said:
no travel charger.
i havent did what u said previously, cause now my phone no battery, i cant boot up, im trying to get it charged but it wont work.
the phone is now unchargable. WTH is this problem???
Click to expand...
Click to collapse
did you try different charger? maybe the problem is in your charger,
Listen here,its IMPORTANT to install gapps if u havent alrdy.
Step 1 flash kernel
Step 2 reboot to CWM then factory reset (full wipe) MAKE SURE U DO THIS.
Step 3 install rom minicm7.2.1.x and then gapps
Step 4 reboot,takes 2 ~ minutes
GAPPS is a VITAL Step it has nothing to do with ur charger nor hardware.
Edit:i know i might not be an x8 user anymore,but i had that problem because i didnt read the instructions propely.
Edit2: im using a apple wall charger and it works fine,charging my Xperia Neo V.
Sent From MT11i
thu001 said:
Listen here,its IMPORTANT to install gapps if u havent alrdy.
Step 1 flash kernel
Step 2 reboot to CWM then factory reset (full wipe) MAKE SURE U DO THIS.
Step 3 install rom minicm7.2.1.x and then gapps
Step 4 reboot,takes 2 ~ minutes
GAPPS is a VITAL Step it has nothing to do with ur charger nor hardware.
Edit:i know i might not be an x8 user anymore,but i had that problem because i didnt read the instructions propely.
Edit2: im using a apple wall charger and it works fine,charging my Xperia Neo V.
Sent From MT11i
Click to expand...
Click to collapse
im now using gingerDX 023b, i flashed alfs kernal, and everything but still cant charge.
Its phone problem, wont be charger prob.
OK, now i hope it stays like this...
I charged my battery with universal charger. Done.
I flashed stock kernal. Done
Flashed 2.1.1.a.0.6 firmware. done
flashed 015 baseband done.
So far charging still works, camera testing...
zhuhang said:
OK, now i hope it stays like this...
I charged my battery with universal charger. Done.
I flashed stock kernal. Done
Flashed 2.1.1.a.0.6 firmware. done
flashed 015 baseband done.
So far charging still works, camera testing...
Click to expand...
Click to collapse
if don't facing the problem with stock rom/ stock kernel, then your phone doesn't work perfectly with custom kernel or ROM. or maybe there are step that you didn't take it
acoongg said:
if don't facing the problem with stock rom/ stock kernel, then your phone doesn't work perfectly with custom kernel or ROM. or maybe there are step that you didn't take it
Click to expand...
Click to collapse
maybe, but first time i unlock bootloader, and use minicm7, no problem at all.
and there's some problem with battery now. Overnight 100% will become 0 %
I think its because malfunctioning camera keep running background, let me try to freeze it and see the result.
zhuhang said:
maybe, but first time i unlock bootloader, and use minicm7, no problem at all.
and there's some problem with battery now. Overnight 100% will become 0 %
I think its because malfunctioning camera keep running background, let me try to freeze it and see the result.
Click to expand...
Click to collapse
or, you can try to reinstall your custom ROM, and then full wipe data.
don't install any application except the preinstalled application built-in with ROM.
let the phone running normaly, if your battery doesn't face the problem, maybe there's some application causing that problem in your phone
acoongg said:
or, you can try to reinstall your custom ROM, and then full wipe data.
don't install any application except the preinstalled application built-in with ROM.
let the phone running normaly, if your battery doesn't face the problem, maybe there's some application causing that problem in your phone
Click to expand...
Click to collapse
ya, its the camera, now i freezed camera and evething fine, except camera.
Im still using stock rom, i dont dare to try custom rom yet, maybe after some time.

[Q] USB Debugging CM10 and V30I

Hey guys, since i flashed CM10 and/or V30I KU5900 i have some problems with USB Debugging, i cannot use QtADB, or flash the CWM for example .
All drivers are installed but it just doesn't show up D:
Any suggestions?
Thanks for your Help .
In cm10 change your mode from MTP to camera. So just pull down the topbar, find the USB option there, while plugged to USB, open it, change it to Camera, unplug USB, plug in again and that's it.
For KU5900 repack, I cant tell you, but it should work similar. Dont forget to enable usb debugging in settings
N00BY0815 said:
In cm10 change your mode from MTP to camera. So just pull down the topbar, find the USB option there, while plugged to USB, open it, change it to Camera, unplug USB, plug in again and that's it.
For KU5900 repack, I cant tell you, but it should work similar. Dont forget to enable usb debugging in settings
Click to expand...
Click to collapse
Well, it looks like it's working as USB Transfer on CM10 with CWM Flash but QtADB doesn't seen to work
I can't download the newest version of QtADB, i don't know why, it just doesn't connect, so i'm using the 0.7.3 version .
If you can mirror it i'd be glad
Nikitozin said:
Well, it looks like it's working as USB Transfer on CM10 with CWM Flash but QtADB doesn't seen to work
I can't download the newest version of QtADB, i don't know why, it just doesn't connect, so i'm using the 0.7.3 version .
If you can mirror it i'd be glad
Click to expand...
Click to collapse
Sorry, I am on Linux now, when working with Android... So I only use the "real adb"
N00BY0815 said:
Sorry, I am on Linux now, when working with Android... So I only use the "real adb"
Click to expand...
Click to collapse
Okay XD
Thanks for the help once more : )
Added a mirror for you above
hey this is my first post so correct me if i do many mistake
i have rooted my phone LGp970 very first time...
now i have flashed the korean LG-KU5900 ICS V30I...
and now i can't use my menu,home,back,and search keys...
i can only use them if i put my cell to charge...
any solution for that..
or i m the only one having this problem???
i have read all the topics related to rooting,flashing,unbricking,etc before rooting my phone....
still i can be wrong.....but su is there after rooting...
btw i flashed using "ROM Manager" (i guess only method available for noobs like me)
i had wiped dalvik data(or cache idk) and wiped data also...and done nandroid backup saperately......
one mere thing while backing up some file named sd xlm(or idk) skipped....should i bother about it
.
.
.
.
.
.help me every possible way.....please
cause i can't access my sd as sd in korean ICS V30I because it shows it as internal storage....and i have only one phone so quick reply would be appriciated.....
an sorry for bad english....
rony3964 said:
i have rooted my phone LGp970 very first time...
now i have flashed the korean LG-KU5900 ICS V30I...
and now i can't use my menu,home,back,and search keys...
i can only use them if i put my cell to charge...
any solution for that..
or i m the only one having this problem???
i have read all the topics related to rooting,flashing,unbricking,etc before rooting my phone....
still i can be wrong.....but su is there after rooting...
btw i flashed using "ROM Manager" (i guess only method available for noobs like me)
i had wiped dalvik data(or cache idk) and wiped data also...and done nandroid backup saperately......
one mere thing while backing up some file named sd xlm(or idk) skipped....should i bother about it
.
.
.
.
.
.help me every possible way.....please
cause i can't access my sd as sd in korean ICS V30I because it shows it as internal storage....and i have only one phone so quick reply would be appriciated.....
an sorry for bad english....
Click to expand...
Click to collapse
first of all, try rebooting into recovery(cwm)
if you can't, download an app called quickboot or titanium backup
from your pc, download the sd card fix from the thread
with that, reboot into recovery
wipe data, cache, dalvik
then re-install the rom
afterwards install the sdcard fix
theaks30 said:
first of all, try rebooting into recovery(cwm)
if you can't, download an app called quickboot or titanium backup
from your pc, download the sd card fix from the thread
with that, reboot into recovery
wipe data, cache, dalvik
then re-install the rom
afterwards install the sdcard fix
Click to expand...
Click to collapse
it will fix my menu key,home key problem also right???

[Q] problem after doing wipe cache partition on cwm

Ok, so my phone is rooted and i was going through the steps before applying they cyanogen mod 10 nighly.
In cwm i had:
- Created a back up
- Wiped data / factory reset
- Wiped cache partition (it took a wil then the screen went black as if it had reset)
And now i am unable to power 'on' the device?
Any ideas
hal9000 said:
And now i am unable to power of the device?
Click to expand...
Click to collapse
Do you mean you cant power the device ON ?
What happens when you connect usb cable ? Does anything light up, Does your computer 'beep' to notify you of a connected device ?
Have you took battery out and reinserted ? or just left it to charge for around 10 mins before trying to power on ?
Also, What ROM + Kernel were you on before you did the wipes in recovery ?
Ahh yes, in my panic i miss typed.
O cant power on i have tried taking the battery out etc. but with no luck.
I just plugged it into my laptop pc and not a thing
I was on stock ICS (uk) and i don't think i changed the kernel either
I had just rooted and did the super user thing
I also probably didnt fully install CMW as i ran the CWM.zip from external sd from recovery each time.
azzledazzle said:
Do you mean you cant power the device ON ?
What happens when you connect usb cable ? Does anything light up, Does your computer 'beep' to notify you of a connected device ?
Have you took battery out and reinserted ? or just left it to charge for around 10 mins before trying to power on ?
Also, What ROM + Kernel were you on before you did the wipes in recovery ?
Click to expand...
Click to collapse
If you are on stock kernal that implies you are prone to emmc bug, you shouldnt do wipes on stock kernal
Sent from my GT-N7000 using xda premium
You can Revive your phone with a pit file like me. I bricked mine with the same way as you. Check this: http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Thanks but I don't know if that will work as i can't get the phone to power on (as far as i can tell) and it doesn't seem to do anything when i plug it into the laptop.
No ping no beep.
It had about 60% power left when i did it so it has juice.
I am thinking might have to take it to carphonewhorehouse and tell them i was just doing a factory reset cos it had slowed down with all the apps and it reset while doing it and now won't turn on?
KvnTM said:
You can Revive your phone with a pit file like me. I bricked mine with the same way as you. Check this: http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Click to expand...
Click to collapse
in this ERA of auto-root kernels, people still using CWM.zip...
probably should have just read some stickies. but too late...
if there is no response from the device, the pits are not going to work. only way is to get a replacement motherboard under warranty,
and as the device is non responsive.. they will not be able to detect anything about root.
Good Luck
Yeah i did some reading, but clearly not in the right place
back to the shop it goes. If you have a guide that you could point me to to get this doen the correct way then that would be much appreciated (if and whn i get a working replacement)
Thanks
nokiamodeln91 said:
in this ERA of auto-root kernels, people still using CWM.zip...
probably should have just read some stickies. but too late...
if there is no response from the device, the pits are not going to work. only way is to get a replacement motherboard under warranty,
and as the device is non responsive.. they will not be able to detect anything about root.
Good Luck
Click to expand...
Click to collapse
when you get the phone check what rom its on. just update to the latest ICS rom..(donot wipe).
download philz kernel for the rom you have updated to.
put it in the sd card
boot into recovery
and apply update from ext storage.> point to the kernel > install
thats it. your phone gets rooted, safe kernel and CWM inbuilt.
now you can follow the procedure in the CM10 rom to install. (The Safe Way)
Thanks!
I have just got back from CPW where the nice lady said that it looks like a hardware fault given what i had described so she is sending it off to be either mobo replaced o plain replaced.
I have emailed myself your guide and will look into it if and when i get it back.
Thanks !
nokiamodeln91 said:
when you get the phone check what rom its on. just update to the latest ICS rom..(donot wipe).
download philz kernel for the rom you have updated to.
put it in the sd card
boot into recovery
and apply update from ext storage.> point to the kernel > install
thats it. your phone gets rooted, safe kernel and CWM inbuilt.
now you can follow the procedure in the CM10 rom to install. (The Safe Way)
Click to expand...
Click to collapse
see you soon with your new phone mate
annoyingly it will only be a couple of months till my contract is up, at which point i will buy outright a new galaxy note 2 and stick a giffgaff sim in it.
nokiamodeln91 said:
see you soon with your new phone mate
Click to expand...
Click to collapse
Goodluck to you my friend

[Q] HELP !!! Charging issue and always getting stuck !!

Hello everyone
my phone was not getting charged, i went to the samsung service and they said me that something's wrong with the battery so i got it replaced today and still the battery is not getting charged !! :| I tired different chargers but still the same problem. My phone is still in warranty and i am going to the samsung service again ! Any idea whats wrong with my phone??
and yeah one more problem, when ever i install a JellyBean custom rom and if i restart the phone its getting stuck on the samsung logo !! I tired flashing roms (Ultimate Jellybean and Angry v3 ) its getting stuck after reboot :| so please if anyones knows whats wrong with my phone, please let me know !!!
Thank You ! :fingers-crossed:
If you really bought a new battery and it's not charging in every charger you tested:
the new battery isn't so new
or
all chargers are broken.
And to your problem with JB:
http://forum.xda-developers.com/showthread.php?t=2075188
In your own thread post 9 with your own answer might help again
ThaiDai said:
If you really bought a new battery and it's not charging in every charger you tested:
the new battery isn't so new
or
all chargers are broken.
And to your problem with JB:
http://forum.xda-developers.com/showthread.php?t=2075188
In your own thread post 9 with your own answer might help again
Click to expand...
Click to collapse
i bought the battery from the samsung store, I guess its a new :\ about the chargers i have a s2 as well and its charging perfectly with the same chargers
thanks, ill check out the thread
ThaiDai said:
And to your problem with JB:
http://forum.xda-developers.com/showthread.php?t=2075188
In your own thread post 9 with your own answer might help again
Click to expand...
Click to collapse
Oops, i created that thread and forgot about it Sorry my bad
i know how to go back to ics now , but i want Jellybean. Thats y i flashed JB again and im getting the same problem :\ can anyone say me how to fix that ?
xp3rto said:
Oops, i created that thread and forgot about it Sorry my bad
i know how to go back to ics now , but i want Jellybean. Thats y i flashed JB again and im getting the same problem :\ can anyone say me how to fix that ?
Click to expand...
Click to collapse
are you able to use you USB port/cable at all? can you connect the pc to the phone ?
if not; Id say your usbport is borked.
Anthropostar said:
are you able to use you USB port/cable at all? can you connect the pc to the phone ?
if not; Id say your usbport is borked.
Click to expand...
Click to collapse
Yeah i'm able to connect the phone to the pc
xp3rto said:
Yeah i'm able to connect the phone to the pc
Click to expand...
Click to collapse
k, so and JB roms are getting stuck at boot huh.
what i would do:
I'd say
->fire up Odin, flash a kernel that includes CWM. (dunno what kernel youve been using, but lets start all over)
->Reboot -> reboot into (cwm) recovery, and flash the superuser (SU) package again.
#-If all that succeeded (you are now properly rooted);
->in CWM make a backup.
->flash a CM 10.1 kernel
->flash any JB (4.2) rom.
#-Once all that succeeded, reboot.
->If your JB rom loads succesfully hopefully youll see your device charging.
->If not, reboot into recovery again, make sure your device has been plugged in long enough to have loaded the battery (maybe not shown in stats).
-> in CWM choose Clear battery stats.
Thats what i'd do.
Anthropostar said:
k, so and JB roms are getting stuck at boot huh.
what i would do:
I'd say
->fire up Odin, flash a kernel that includes CWM. (dunno what kernel youve been using, but lets start all over)
->Reboot -> reboot into (cwm) recovery, and flash the superuser (SU) package again.
#-If all that succeeded (you are now properly rooted);
->in CWM make a backup.
->flash a CM 10.1 kernel
->flash any JB (4.2) rom.
#-Once all that succeeded, reboot.
->If your JB rom loads succesfully hopefully youll see your device charging.
->If not, reboot into recovery again, make sure your device has been plugged in long enough to have loaded the battery (maybe not shown in stats).
-> in CWM choose Clear battery stats.
Thats what i'd do.
Click to expand...
Click to collapse
Ill give this a try and let you know
Anthropostar said:
k, so and JB roms are getting stuck at boot huh.
what i would do:
I'd say
->fire up Odin, flash a kernel that includes CWM. (dunno what kernel youve been using, but lets start all over)
->Reboot -> reboot into (cwm) recovery, and flash the superuser (SU) package again.
#-If all that succeeded (you are now properly rooted);
->in CWM make a backup.
->flash a CM 10.1 kernel
->flash any JB (4.2) rom.
#-Once all that succeeded, reboot.
->If your JB rom loads succesfully hopefully youll see your device charging.
->If not, reboot into recovery again, make sure your device has been plugged in long enough to have loaded the battery (maybe not shown in stats).
-> in CWM choose Clear battery stats
Thats what i'd do.
Click to expand...
Click to collapse
Im not able to install the JB rom :| My phone restarts when the installation is about to complete.
ThaiDai said:
If you really bought a new battery and it's not charging in every charger you tested:
the new battery isn't so new
or
all chargers are broken.
And to your problem with JB:
http://forum.xda-developers.com/showthread.php?t=2075188
In your own thread post 9 with your own answer might help again
Click to expand...
Click to collapse
I bought a new charger today and my phone is charging Thanks

[S] HTC One M7 Semi Bricked Force AC Problem

So I think I may have hard (or Soft) bricked my HTC one, I recently installed faux123's sense kernel: m7-faux123-GE444-016u and was experiencing several crashes and problems so I re flashed the elementalx kernel (A past WORKING configuration) following all the same steps I normally do when installing a new kernel (clearing cache and my devlick [Not sure how to spell it])
After re flashing I was experiencing boot issues where my phone wouldn't make it past the "HTC" Splash screen, so I tried several times re flashing ElementalX with different settings, after several tries i decided to restore from a recently made backup of my ROM, which gave me the same results as installing the ElementalX kernel... no ability to boot. Then out of frustration I decided to reformat my entire /sdcard thinking I could re flash my roms and kernels via usb and my laptop... until I went into fast boot... turns out I have ac mode locked (A kernel setting I set awhile back when experimenting) so now my phone is stuck in clockwork mod recovery and I'm unable to make any changes via ADB commands or Fast Boot.
So basically what I'm asking is if my phone is completely screwed over, and if there is any way of removing the AC Charging lock, without flashing a new kernel or booting (Since I did a full SD wipe, all my backups and roms, and kernels are gone) and if I will have to send my phone in to get it repaired
UPDATE: so I noticed some basic functions of the phone work, pressing the volume up and down keys eventually cause the phone to viberate, as if the phone is vibrating when it goes into silent mode, the backlight turns on and off when the power button is pressed quickly, what is going on, any ideas?? is the phone running properly and i just cant see it??
Final Update: So I got Everything working and I am now able to flash a new rom and everything on my phone... the way it was fixed was by use of the OTG cable, After leaving my phone running a little while The usb Mounted with absolutely no trouble I used the reccommended roms and it installed with no issues, now that I have a running backup I am now going to install the roms I used before all the issues arose, thank you for all your help!! you guys saved me a trip to a repair center, and also spending for a new phone Cheers!
Jromkes1 said:
So I think I may have hard (or Soft) bricked my HTC one, I recently installed faux123's sense kernel: m7-faux123-GE444-016u and was experiencing several crashes and problems so I re flashed the elementalx kernel (A past WORKING configuration) following all the same steps I normally do when installing a new kernel (clearing cache and my devlick [Not sure how to spell it])
After re flashing I was experiencing boot issues where my phone wouldn't make it past the "HTC" Splash screen, so I tried several times re flashing ElementalX with different settings, after several tries i decided to restore from a recently made backup of my ROM, which gave me the same results as installing the ElementalX kernel... no ability to boot. Then out of frustration I decided to reformat my entire /sdcard thinking I could re flash my roms and kernels via usb and my laptop... until I went into fast boot... turns out I have ac mode locked (A kernel setting I set awhile back when experimenting) so now my phone is stuck in clockwork mod recovery and I'm unable to make any changes via ADB commands or Fast Boot.
So basically what I'm asking is if my phone is completely screwed over, and if there is any way of removing the AC Charging lock, without flashing a new kernel or booting (Since I did a full SD wipe, all my backups and roms, and kernels are gone) and if I will have to send my phone in to get it repaired
Click to expand...
Click to collapse
ummm lol oops, can you post your fastboot getvar all please, is that even possible ? then we can see if we can find an RUU for you to run through your phone.
EDIT, just saw you cant make any changes via fastboot or adb, my bad, my first question to you is why would you enable an option like that ?, I could suggest you get a USB OTG cable and stick a custom rom on it then plug it into the phone and from recovery flash it, problem is, most custom roms require twrp recovery and you have cwm.
you could send your phone in for repair, but im guessing your bootloader is unlocked and unfortunately, this voids warranty and you'll have to pay for any repairs.
Seanie280672 said:
ummm lol oops, can you post your fastboot getvar all please, is that even possible ? then we can see if we can find an RUU for you to run through your phone.
EDIT, just saw you cant make any changes via fastboot or adb, my bad, my first question to you is why would you enable an option like that ?, I could suggest you get a USB OTG cable and stick a custom rom on it then plug it into the phone and from recovery flash it, problem is, most custom roms require twrp recovery and you have cwm.
you could send your phone in for repair, but im guessing your bootloader is unlocked and unfortunately, this voids warranty and you'll have to pay for any repairs.
Click to expand...
Click to collapse
Thanks for your response! (im a newbie, as you probably already know)
about the Force AC issue: I foolishly enabled it when i was customizing my kernel not knowing that it would give me this much trouble, and the effects it'd give.
if I got a OTG cable would that work? or would it go into AC mode? What if i got the sense venom rom and installed it on CWM? that's what I used before and it worked quite well. i am going to town now to buy a OTG cable ill be back and ill let you know how it goes, I think this may work... Finally a slight gleam of hope for my HTC One
Jromkes1 said:
Thanks for your response! (im a newbie, as you probably already know)
about the Force AC issue: I foolishly enabled it when i was customizing my kernel not knowing that it would give me this much trouble, and the effects it'd give.
if I got a OTG cable would that work? or would it go into AC mode? What if i got the sense venom rom and installed it on CWM? that's what I used before and it worked quite well. i am going to town now to buy a OTG cable ill be back and ill let you know how it goes, I think this may work... Finally a slight gleam of hope for my HTC One
Click to expand...
Click to collapse
that rom will just bootloop, it requires twrp recovery.
you could try and put CM11 on a usb stick, plug the usb stick into one end of the OTG cable (on the go cable) and the other into your phone, boot into cwm and then select install from OTG, I think CM roms require CWM, cant promise anything, but worth a try.
normally you would beable to put stock rom.zip on the otg cable and flash that, but it requires a locked or re-locked bootloader, and that's not going to be possible without a fastboot command.
another option that springs to mind, is put the kernel you originally flashed on the OTG cable, install it in CWM, im guessing the option to enable force AC was enabled during install ? just disable it and continue with the kernel flash, after a reboot you may get fastboot USB, easy to fix once you get that.
Jromkes1 said:
So I think I may have hard (or Soft) bricked my HTC one, I recently installed faux123's sense kernel: m7-faux123-GE444-016u and was experiencing several crashes and problems so I re flashed the elementalx kernel (A past WORKING configuration) following all the same steps I normally do when installing a new kernel (clearing cache and my devlick [Not sure how to spell it])
After re flashing I was experiencing boot issues where my phone wouldn't make it past the "HTC" Splash screen, so I tried several times re flashing ElementalX with different settings, after several tries i decided to restore from a recently made backup of my ROM, which gave me the same results as installing the ElementalX kernel... no ability to boot. Then out of frustration I decided to reformat my entire /sdcard thinking I could re flash my roms and kernels via usb and my laptop... until I went into fast boot... turns out I have ac mode locked (A kernel setting I set awhile back when experimenting) so now my phone is stuck in clockwork mod recovery and I'm unable to make any changes via ADB commands or Fast Boot.
So basically what I'm asking is if my phone is completely screwed over, and if there is any way of removing the AC Charging lock, without flashing a new kernel or booting (Since I did a full SD wipe, all my backups and roms, and kernels are gone) and if I will have to send my phone in to get it repaired
Click to expand...
Click to collapse
I second the idea of the USB OTG, I use mine all the time.
this Older version of ARHD should work fine with cwm
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_31.6.zip
clsA said:
I second the idea of the USB OTG, I use mine all the time.
this Older version of ARHD should work fine with cwm
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_31.6.zip
Click to expand...
Click to collapse
I use mine all the time too, mainly for backup's though, I have a 8gb USB stick pretty much full of backup's
OK So i got an OTG cable and now I am preparing to download the required roms and everything onto the USB, the only question i have is if the usb will work with the current (AC only) power settings, or will it not work? *Sigh* this is so frusterating
EDIT: soo... the OTG cable does not work from what it appears, I just cannot figure out a way to mount it with CWM, any ideas?
Jromkes1 said:
OK So i got an OTG cable and now I am preparing to download the required roms and everything onto the USB, the only question i have is if the usb will work with the current (AC only) power settings, or will it not work? *Sigh* this is so frusterating
Click to expand...
Click to collapse
only one way to find out, with the phone in the bootloader, plug in the USB OTG cable now and see if it turns to fastboot host ?
if not, don't worry just yet, you'll still need to see if it works in recovery or not.
---------- Post added at 09:54 PM ---------- Previous post was at 09:53 PM ----------
Jromkes1 said:
OK So i got an OTG cable and now I am preparing to download the required roms and everything onto the USB, the only question i have is if the usb will work with the current (AC only) power settings, or will it not work? *Sigh* this is so frusterating
EDIT: soo... the OTG cable does not work from what it appears, I just cannot figure out a way to mount it with CWM, any ideas?
Click to expand...
Click to collapse
when you select install, does it not give you an option to choose between internal storage and USB OTG ?
Seanie280672 said:
only one way to find out, with the phone in the bootloader, plug in the USB OTG cable now and see if it turns to fastboot host ?
if not, don't worry just yet, you'll still need to see if it works in recovery or not.
---------- Post added at 09:54 PM ---------- Previous post was at 09:53 PM ----------
when you select install, does it not give you an option to choose between internal storage and USB OTG ?
Click to expand...
Click to collapse
no it does not, i went to advanced > mounts and storage > Mount USB Storage and nothing happens aswell
EDIT: Fastboot does not turn into fastboot Host either
Jromkes1 said:
no it does not, i went to advanced > mounts and storage > Mount USB Storage and nothing happens aswell
Click to expand...
Click to collapse
unfortunately I think its lost, theres only a couple more things you could possibly try, one is to riffbox it, you should beable to get this done at a little back street mobile phone shop or although its not a hard brick, you could try this, not sure if it will work on your device, but if it does it will re-write your partitions.
http://forum.xda-developers.com/showthread.php?t=2770684
this is the first soft brick.......ummm.......hard brick HTC M7 ive seen.
Seanie280672 said:
unfortunately I think its lost, theres only a couple more things you could possibly try, one is to riffbox it, you should beable to get this done at a little back street mobile phone shop or although its not a hard brick, you could try this, not sure if it will work on your device, but if it does it will re-write your partitions.
http://forum.xda-developers.com/showthread.php?t=2770684
this is the first soft brick.......ummm.......hard brick HTC M7 ive seen.
Click to expand...
Click to collapse
ok, the only problem is that it requires a usb connection, and that's my problem, it changes to AC power when it gets plugged into any powered device via usb... see I know i could fix my problem if it were not for the damn kernel settings I made a long while ago, like It still works, I just can't access the internal SD card
Jromkes1 said:
no it does not, i went to advanced > mounts and storage > Mount USB Storage and nothing happens aswell
EDIT: Fastboot does not turn into fastboot Host either
Click to expand...
Click to collapse
maybe this will help
https://www.youtube.com/watch?v=ZLISkavPg9U
---------- Post added at 05:20 PM ---------- Previous post was at 05:16 PM ----------
Seanie280672 said:
I use mine all the time too, mainly for backup's though, I have a 8gb USB stick pretty much full of backup's
Click to expand...
Click to collapse
I have a couple of these their really handy
http://www.kingston.com/us/usb/pers...SB-OTG&gclid=CISjr6HI_78CFSxk7AodwFEABQ#DTDUO
clsA said:
maybe this will help
https://www.youtube.com/watch?v=ZLISkavPg9U
---------- Post added at 05:20 PM ---------- Previous post was at 05:16 PM ----------
I have a couple of these their really handy
http://www.kingston.com/us/usb/pers...SB-OTG&gclid=CISjr6HI_78CFSxk7AodwFEABQ#DTDUO
Click to expand...
Click to collapse
sadly I was just watching the same video, I have no options to open the OTG external sd cards, anywhere, I am genuinely mystified by this
Jromkes1 said:
sadly I was just watching the same video, I have no options to open the OTG external sd cards, anywhere, I am genuinely mystified by this
Click to expand...
Click to collapse
not OTG just install / external sdcard
reformat the flash drive your using to fat32 copy the rom to it and try again
clsA said:
not OTG just install / external sdcard
reformat the flash drive your using to fat32 copy the rom to it and try again
Click to expand...
Click to collapse
still nothing... but i did find something interesting, when it reboots and it passes the HTC splash screen the screen goes black like it should, but the USB light turns on and it flashes like its supposed to (No Light when in recovery), and also the power buttons turns on and off the backlight, and the volume buttons turns seems to make the mute single vibration when it is pressed down enough times. very strange
edit: when doing the unlocking gesture it seems my phone is working! volume presses makes the default beep, holding power buttons makes a quick vibration like when the power menu appears... do you think my phone IS working its just the kernel that is messed up? and is not allowing my screen to function correctly?

Categories

Resources