hi
im using the bluedio AV890 bluetooth stereo head set yes it works fine and the effect is great.but when i disconnect it from my phone my phone seems to automatically go into silent mode and the only way i can make it to normal is by rebooting the phone
what i do when i dont want to use the Headset is just disconnect the bluetooth via the phone.Am i doing something wrong kindly advise and thanks in advance
Related
Hi All,
I just got a Jabra SP700 after pairing it with my Kaiser everything works fine ( making a call, receiving a call, Playing music through FM radio and TT navi. through the radio). The problem is when I disconnect the devices and turn them both on they will reconnect automatically but I can't hear anything through the SP700 ( FM Radio ). I will have to delete the device from the phone and pair it again in order to make it work.
Is there a better software for managing the bluetooth connections?
Open to any suggestions.
Thanks.
Edris said:
Hi All,
I just got a Jabra SP700 after pairing it with my Kaiser everything works fine ( making a call, receiving a call, Playing music through FM radio and TT navi. through the radio). The problem is when I disconnect the devices and turn them both on they will reconnect automatically but I can't hear anything through the SP700 ( FM Radio ). I will have to delete the device from the phone and pair it again in order to make it work.
Is there a better software for managing the bluetooth connections?
Open to any suggestions.
Thanks.
Click to expand...
Click to collapse
I have the same problem with my SP700 and my Tritton BT stereo headset.Phone calls work almost all the time through the SP700 speaker, but playing music or through the FM radio seems to be a problem. I can get them to pair up sometimes by only checking the Wireless Stereo box. It works for a few times, but then I have to delete and re-pair again.
I've searched for all over for answers, but nothing seems to be a permanent fix. It's very frustrating to use my devices for anything else but phone calls.
Just to add a bit of info, I do not have any problems with my old Motorola HS820. Of course, I'm not using SP700.
Hope that helps your troubleshooting.
I have exactly the same problem with hte SP700 connecting to a Touch HD.
I notice there is a software upgrade for the SP700 on the Jabra site but I can't get to apply it because I lack a driver to allow the PC to recognise the JAbra SP 700.
Any ideas would be greatly appreciated.
Thanks
Mal
Possible solution
Hi
I have had similar problems with the SP700. I was using the Hyperdragon III before the current ROM (in signature). With my old ROM I found that the following method worked:
1) Turn on the SP700
2) Wait for it to make one low tone
3) Turn bluetooth onto discoverable mode on the phone
4) The device then automatically connects over both Hands Free and Wireless Stereo protocols
5) Turn discoverable off
Now that I have the Hyperdragon IV ROM I notice slightly different behaviour:
1) Turn on the SP700
2) Wait for it to make one low tone
3) Turn bluetooth onto discoverable on the phone
4) The device then automatically connects over hands free protocol
5) Go into bluetooth settings on the phone then the devices tab and manually connect by selecting "Set as Wireless Stereo" from the pop up context menu- this connects over the wireless stereo protocol
6) Turn discoverable off
One thing I do find very annoying about the SP700 is that it disconnects from the Wireless Stereo protocol after a phone call is ended. When this happens I have to manually re-connect it by pushing the button on the SP700 until it peeps.
I too would value a software upgrade for the SP700. I just get the feeling that it has somehow shipped with a beta or incomplete firmware. If anybody knows how to do the firmware upgrade please share this.
Thanks
andrew-in-woking
Found a solution that works for me!
First of all thanks guys for the suggestions !
I think SP700 works fine ( GREAT! ) but the issue is with the A2DP. I found out that A2DP turns on the first time after pairing the devices but it does not turn off. So the next time you pair the devices it is turned on and won't accept the new connection. So what I tried to do was after connecting I turned off A2DP and turned it back on and it works fine.
Suggestion
Search for A2DP Toggle, install it and after pairing the devices if it doesn't work just turn A2DP off and back on.
I assigned the 6th hardware button on my Kaiser (PTT Button) to A2DP Toggle that way I can have access to it all the time.
Works great.
Edris said:
Found a solution that works for me!
First of all thanks guys for the suggestions !
I think SP700 works fine ( GREAT! ) but the issue is with the A2DP. I found out that A2DP turns on the first time after pairing the devices but it does not turn off. So the next time you pair the devices it is turned on and won't accept the new connection. So what I tried to do was after connecting I turned off A2DP and turned it back on and it works fine.
Suggestion
Search for A2DP Toggle, install it and after pairing the devices if it doesn't work just turn A2DP off and back on.
I assigned the 6th hardware button on my Kaiser (PTT Button) to A2DP Toggle that way I can have access to it all the time.
Works great.
Click to expand...
Click to collapse
Thanks! Nice App! Tried it with my Tritton BT stereo headset and it works! Had to install to my device instead of Storage card, then had to delete and re-pair, but it so far I can toggle between on and off Stereo Headphones without any problem. Will try on my SP700 shortly.
I attached the Cab if anyone else wants it.
Thank you!
Works with SP 700!!!!!
Mal Bridgeman said:
I have exactly the same problem with hte SP700 connecting to a Touch HD.
I notice there is a software upgrade for the SP700 on the Jabra site but I can't get to apply it because I lack a driver to allow the PC to recognise the JAbra SP 700.
Any ideas would be greatly appreciated.
Thanks
Mal
Click to expand...
Click to collapse
When the software loads, follow the instructions, do not install with any of the microsoft wizards that pop up, it will install itself. I couldn't find anything that lists what changes that were made.
SP700 Firmware
FYI,
I too had the same issues and downloaded the sp700 firmware update. I thought the same thing about the drivers, but called Jabra and they told me the firmware update has the drivers embedded in it. When you start the install you cannot plug it in till it tells you to. After you plug it in it installs the drivers. But BEWARE I have not been able to complete the upgrade, it stopped halfway and bricked. I called support and they said there is nothing to do, but luckily I bought it from Costco and they returned it. So being not so bright I tried it again but on a different computer (thinking that there might be a conflict) and it didn't even load and bricked it again. So I returned it yet again. So then I gave up on Jabra support and found A2DP toggle. It works good enough, so I am leaving it at that....
Take Care
David
Tilt WM6.1
andrew-in-woking said:
Hi
I have had similar problems with the SP700. I was using the Hyperdragon III before the current ROM (in signature). With my old ROM I found that the following method worked:
1) Turn on the SP700
2) Wait for it to make one low tone
3) Turn bluetooth onto discoverable mode on the phone
4) The device then automatically connects over both Hands Free and Wireless Stereo protocols
5) Turn discoverable off
Now that I have the Hyperdragon IV ROM I notice slightly different behaviour:
1) Turn on the SP700
2) Wait for it to make one low tone
3) Turn bluetooth onto discoverable on the phone
4) The device then automatically connects over hands free protocol
5) Go into bluetooth settings on the phone then the devices tab and manually connect by selecting "Set as Wireless Stereo" from the pop up context menu- this connects over the wireless stereo protocol
6) Turn discoverable off
One thing I do find very annoying about the SP700 is that it disconnects from the Wireless Stereo protocol after a phone call is ended. When this happens I have to manually re-connect it by pushing the button on the SP700 until it peeps.
I too would value a software upgrade for the SP700. I just get the feeling that it has somehow shipped with a beta or incomplete firmware. If anybody knows how to do the firmware upgrade please share this.
Thanks
andrew-in-woking
Click to expand...
Click to collapse
I have the exact problem that you are having with the new, Hyperdragon IV, ROM.
Is this A2DP Toggle really the only way - I mean what's the difference between pressing a button on my Kaiser to reconnect and pressing the button on the SP700 ??
I have tried using Mortscript as shown http://forum.xda-developers.com/showthread.php?t=382172&highlight=a2dp&page=2 Although I edited the end out because it kills the player after ending a call. This hasn't helped either
I am off to see if the same problems occur with my lady's N96. If not and no good solution can be found for this I may have got her a new present.
Aren't I nice ?!
Found another possible solution, it,s called zoA2DP. So far it works flawlessly between my SP700 & stereo headset without having to toggle anything or change any settings. When you install it, delete your original pairings and add them again, make sure that hands free & wireless stereo are checked in advanced options on you BT settings. I believe this is a registry mod, there are no icons or any noticeable applications running in the backround.
The thread is here
http://forum.xda-developers.com/showthread.php?t=279127
Cab file attached
Hi there. I was wondering if anyone could help me with an issue I am having after my 1.5 update (non-rooted). After my update I played around with it for a bit and love it but I went to play with my bluetooth and I can't listen to music through the headset like it said it was suppose to do. I get a ringing noise when someone calls but no music thru it. Did I do something wrong with the manual update or something? If someone could help me I would truly appreciate it.
Also I was curious if its possible if I can root my phone after the update or is it not an option anymore? I been thinking bout it now and is loving the cool themes you can get.
Thank you so much for your time
i to have this problem from time to time
i manage to fix the problem temporary by going to the phone's settings > Wireless controls > Bluetooth settings > klick and hold the bluetooth device till a popup comes > Options > then toggle media off and on
then my headset works out fine
ps: i just repaired my headset as a test, witch i dint do after the update and it seems to work after turning off bluetooth and the device
ill give u an update if it works after a couple of times
Thanks for responding. I have tried for 2 days now to try to get it to work and I haven't gotten it to work yet. I kept my music running while trying to disconnect and reconnect the headset (motorola H690) and nothing and then earlier I got a phone call while I was listening to my music off my phone and I got a phone call and I answered it via bluetooth and when I got off the phone I could hear the music for a couple seconds and it shut off and started playing on the phone speaker. I don't know what the deal is.
i to still have that problem
i can start and stop the media from my bluetooth device but it will play on my phone
still when i toggle media off and on in the bluetooth device options it fixes it sometimes for 3 connects sometimes till the next session
what happens if u toggle media off and on with ure G1?
Yeah it still hasn't worked for me and I've done the same things you havei don't know what the deal is.
im not sure if this is the same problem but my g1 is rooted & i have it paired with my bluetooth in my car & when the phone rings... it rings through the car speakers but when i answer the call all sound comes thru the phone... same when i make a calll.. instead of it working thru the car speakers & mic it only wrks thru the g1 itself..
Exactly the same issue as i3lazen
My phone is totally standard running 1.5, just about to go and sell the phone and go back to my HTC Kaiser as it works with no issue.
I can stream music to my BT car stereo no problem but if I can't send and recieve calls then I'm stuffed.
If anyone has any advice, it would be appreciated as I'd love to keep my G1
Hey guys,
try the fix here: http://forum.xda-developers.com/showpost.php?p=4177831&postcount=329
Thanks for the link but is that not just for improving sound quality and not a BT fix?
i3lazen said:
im not sure if this is the same problem but my g1 is rooted & i have it paired with my bluetooth in my car & when the phone rings... it rings through the car speakers but when i answer the call all sound comes thru the phone... same when i make a calll.. instead of it working thru the car speakers & mic it only wrks thru the g1 itself..
Click to expand...
Click to collapse
I had this issue with my rooted phone, and then I updated the radio to 2.22.19.26I and this fixed it. Not sure if this is related to the non root phones but it may be related to it if the radio wasn't updated in the upgrade to 1.5
ashleyglassel said:
I updated the radio to 2.22.19.26I and this fixed it.
Click to expand...
Click to collapse
I've got that radio on my non rooted phone but still have the BT issue
Hi guys, my capitvate just always disconnect with my car's bluetooth randomly.
I have to restart the phone each time becuase to reconnect doesn't work somehow.
is there any fix? anybody on the same table?
please advise.
chaolanren said:
Hi guys, my capitvate just always disconnect with my car's bluetooth randomly.
I have to restart the phone each time becuase to reconnect doesn't work somehow.
is there any fix? anybody on the same table?
please advise.
Click to expand...
Click to collapse
i have the same problem as some other people do as well. There's no actual fix, afaik, although the gingerbread roms seemed to have fixed it for me.
You can ask in the appropriate Q&A for your ROM.
chaolanren said:
Hi guys, my capitvate just always disconnect with my car's bluetooth randomly.
I have to restart the phone each time becuase to reconnect doesn't work somehow.
is there any fix? anybody on the same table?
please advise.
Click to expand...
Click to collapse
bravomail said:
You can ask in the appropriate Q&A for your ROM.
Click to expand...
Click to collapse
in his defense - although I could be wrong, I found that it has nothing to do with one particular rom. I had this problem on stock eclair and many of the custom froyo roms. Once I ran GB, the bluetooth was more reliable.
I'm having the same issue with stock 2.2.
I found a quicker method to fix it.
I downloaded a Bluetooth widget that toggles Bluetooth on and off - this seems to reconnect with my Jeep after the toggle:
com.curvefish.widgets.bluetoothonoff
I'm sure there are a ton of widgets out there; but, you may want to give that a try!
Thanks,
Shawn
I also ran into this as after chatting with Samsung support it turns out that the Galaxy line is set to never auto connect to any bt device even if the connection was already there.
I had trouble with disconnections from my car deck (jvc kw-xr810) when it was trying to share contacts. Once I set the phone to deny contact sharing and set up a separate phone book in the deck, it connects perfectly and never drops.
It's not a perfect solution if you want your whole address book access accessible from the car however.
Sent from my SAMSUNG-SGH-I897 using XDA App
SaintJohnShawn said:
I'm having the same issue with stock 2.2.
I found a quicker method to fix it.
I downloaded a Bluetooth widget that toggles Bluetooth on and off - this seems to reconnect with my Jeep after the toggle:
com.curvefish.widgets.bluetoothonoff
I'm sure there are a ton of widgets out there; but, you may want to give that a try!
Thanks,
Shawn
Click to expand...
Click to collapse
I use tasker for this. I have a task setup that as soon as I turn my car off and BT disconnects, toggle BT off and back on. I noticed that as long as BT is toggled off and back on, it will connect and hold it the next time I use it.
although, I have since turned that task off because GB roms seemed to have fixed the BT issues with my car. I rarely have this problem since switching to gingerbread.
Captivate stock 2.2 intermittent bluetooth problems
I have a stock Captivate with 2.2 android and I'm using a Motorola S10-HD headset to listen to music while I'm at work.
The bluetooth will randomly disconnect causing the music to pause. Sometimes it will reconnect on it's own several seconds later and I am able to continue listening by clicking the play button on the headset. If it doesn't reconnect on it's own then I have to turn off bluetooth on the phone and turn it back on. This will cause it to reconnect but the problem may occur again.
I have switched to listening to music on my Galaxy Tab 10.1 and haven't had any problems so it must be the phone.
Is there anything that will correct the problem?
Is this a defect with my phone or just a design problem with all Captivate phones?
I have a stocked Razr-I Retail GB still ICS , not unlocked .
I am having problems trying to auto connect with my Motorola Bluetooth Headset . Tried turning the razr-i bluetooth button off and on but will not auto connect .
The only way to connect is to manual connect by going to the the phone bluetooth setting and clicking on the paired device .
Now, I noticed that if you reboot again , then the phone sometimes will auto connect again , just by flipping the BT headset , But the auto connect symptoms is not all the time . You have to reboot the phone a couple of times to get the auto connect BT working again .
This is driving me nuts .
Can anybody help me ?
Thx
wtfdc said:
I have a stocked Razr-I Retail GB still ICS , not unlocked .
I am having problems trying to auto connect with my Motorola Bluetooth Headset . Tried turning the razr-i bluetooth button off and on but will not auto connect .
The only way to connect is to manual connect by going to the the phone bluetooth setting and clicking on the paired device .
Now, I noticed that if you reboot again , then the phone sometimes will auto connect again , just by flipping the BT headset , But the auto connect symptoms is not all the time . You have to reboot the phone a couple of times to get the auto connect BT working again .
This is driving me nuts .
Can anybody help me ?
Thx
Click to expand...
Click to collapse
I'm on stock retail JB EU and I use Motorola H17. I must admit that I never used BT Headset when I was on ICS. But since the headset works with JB without any defect or problem I suggest you to wait a while as the upgrade is on the way for GB retail too. The problem will be likely solved with solely upgrade.
Hi guys am facing a headset issue and the problem is like when connected via headphones everything works normally however when removed headset...the phone says headset connected only...there is an app called headset toggle where i can manually make the headset undetect but it does only for sound and it does not remove it completely, calls dont work..so i was thinking if there is any module in xposed or something to make the phone work normally and remove the headset? Any help will be appreciated..am using xperia z custom rom and i have formatted my phone as well..i know its hardware issue but i just thought if we can manually override the settings and make completely undetectable..
Sent from my C6603 using Tapatalk