Modem Issues - Galaxy S I9000 Q&A, Help & Troubleshooting

I have a I9000 with icyglitch kernel and extrodinary firmware both current versions. The base band us xjvu. I get poor reception with it. Been trying to put a different modem in by installing the modem zip from the recovery menu. It says installed but when I go back to phone nothing has changed. Is there a special way to do this on the I9000's
Thanks
Sent from my SGH-I9000 using XDA

make sure usb is unplugged when you flash through CWM, clear cache and dalvik before/after/both?

after testing ive found i have the same problem, trying to flash modems through CMW is unresponsive, baseband stays the same in settings-about. ive had success flashing new modems through heimdall, i cant use odin, it doesn't ever work for me.

You should just download modems from this thread
http://forum.xda-developers.com/showthread.php?t=1158783
Then put them in root folder of phone, restart phone in recovery, flash from zip, select the modem and that's it.

scubadude said:
You should just download modems from this thread
http://forum.xda-developers.com/showthread.php?t=1158783
Then put them in root folder of phone, restart phone in recovery, flash from zip, select the modem and that's it.
Click to expand...
Click to collapse
Right. Try JW4, is the best sound quality and reception

peppottazzo said:
Right. Try JW4, is the best sound quality and reception
Click to expand...
Click to collapse
JW4 for T-Mobile USA? I want 3g, so i must enable 850 through servicemode, but on any modem i try it doesn't want to give me 3g i follow this
http://www.darkyrom.com/community/index.php?threads/guide-enable-850mhz-on-any-modem.3334/
in *#0011# my band is either GSM 1900 or no service, i am unable to get my radio to respond to the 850 band
So i just bought this GT-i9000 international GT-I9000GSMH flashed it with CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip. Ran servicemode *#*#197328640#*#*, enabled all bands, then installed Mintberry-2.3.17 through CMW, then i tried different modems KC1, JVU, JVP, JVQ, JJPG, UGJL2, and the new nexus ones, kb3 kf1, NO LUCK with enabling 3G on my T-Mobile USA phone, can anyone help me, am i using the wrong rom? i like mintberry, any help greatly appriciated, ive been searching the forums with no avail, should i just stick with stock rom, maybe a stock+?
xakuvo said:
Guides I am following:
http://soggycashew.weebly.com/modem-dance.html
https://docs.google.com/document/pub?id=1022rpBQPDZvU0MAa0u6Nuvg3D9TGXrCIxlV8mDjN6us&pli=1
SSN: -I9000GSMH
I was told it is the international edition of the GT-I9000
I am unsure what firmware I started on, i think it was a JVT? I'm unsure, but that doesn't really matter, i used Heimdall, because Odin ALWAYS stops either at Initialization... or Setup Connection..., to flash JVU, then reverted to old USB drivers and used odin to install CF-ROOT JVU(works fine just to flash kernal), so my phone was rooted, i then installed mintberry through CMW AND GOT VERY COMFORTABLE WITH IT, then realized mintberry would not allow me to go into servicemode which would HOPEFULLY get me on T-Mobiles 3G network
So im reading the guide for the modem dance and it asks me to be on UGJL2, TLJL3, UGJK3, UGJK4, modem? firmware? WHAT? i go to http://www.sammobile.com/firmware/ and try to download ANY of the listed firmwares, oh they are all on multiupload links, and they barred themselves from USA ISPs, so i cant download the firmwares, ive searched google, found an unuseable encrypted .rar, woo-hoo... but anyways, i downloaded the appropriate modems, used heimdall to revert back to the "oldest" firmware i can download... JVU (DUMB!!!!!), install cf-root with odin, go to servicemode and enable ONLY WCDMA 850, NO OTHERS ARE STARRED, reboot, *#0011# and it says im on the 1900 band, WTF, i try to install UGJL2, TLJL3, UGJK3, UGJK4 modems through CMW, USB cable NOT plugged in, same results. So I've failed on the 2nd step of the guide...how, i doubt its user error.
Click to expand...
Click to collapse
xakuvo said:
So i was able to get heimdall to work by reinstalling the drivers, unplugging usb, and removing the battery for a couple min. and i installed JVU, which i seem to have to default on...now I tried the supplied passwords on sammobile on the encrypted .rar for UGJL2, a us firmware, and one worked! but when i try to flash with odin, its an odin package, i suppose i could load through heimdall, but anyways when i try to flash with odin it fails, as does the other file UGKC1, I9000UGKC1_homebinary.tar, and I9000UGJL2_homebinary_add_param.tar, so is it impossible to revert back? i should be able to do it, maybe i'll repackage these odin files for heimdall...
if i repackage for heimdall im missing boot.bin dbdata.rfs 512.pit and firmware.xml, should i pull these from the heim jvu package i have? merge them with the KG3 files, try installing through heimdall... would that be safe since odin seems to always fail on me?
Click to expand...
Click to collapse
xakuvo said:
oh i should post this list of comptable 850 defaults i found,
[I9000 Modem release dates]
UGKG3 - 07/18/2011 Default 850mhz
BVJJW2 - 05/18/2011 Default 850mhz
TUBJV6 - 05/04/2011 Default 850mhz
TUBJPD - 04/04/2011 Default 850mhz
UGKC1 - 03/04/2011 Default 850mhz
TDVJP9 - 02/15/2011 Default 850mhz
TUBJP9 - 01/28/2011 Default 850mhz
TJJJV5 - 01/15/2011 Default 850mhz
BVJJPG - 01/14/2011 Default 850mhz
BVJJV3 - 01/02/2011 Default 850mhz
UGJL2 - 12/21/2010 Default 850mhz
BVJJPD - 12/13/2010 Default 850mhz
UGJK4 - 11/29/2010 Default 850mhz
UGJK3 - 11/17/2010 Default 850mhz
thank you http://soggycashew.weebly.com/uploads/8/3/8/2/8382536/i9000_release_dates.txt
now i just got UGKG3, latest 850 enabled homebinary.tar. i found a guide, based on a guide i was using, i guess its updated? i try to do modem dance... http://www.darkyrom.com/community/index.php?threads/guide-enable-850mhz-on-any-modem.3334/ is the guide i found, i follow http://soggycashew.weebly.com/ modem dance though, i dont know, we'll see i guess
i wanted to confirm that i flash with repartition uncheck and i dont have to add the 512.pit file correct?
Click to expand...
Click to collapse
gila2 said:
Official Gingerbread rom for Singapore is DXJV9..
http://forum.xda-developers.com/showthread.php?t=1102881
Singtel CSC for i9000 is XSO
http://www.pspmyspace.com/techstuffs/2012/01/how-to-check-your-samsung-galaxy-csc-version.html
Check if your HSDPA is enabled
Key in *#*#301279#*#*
Display Info > 1 is enabled
Finally, make sure you are using a 3G SIM card.
Click to expand...
Click to collapse
do i need to flash my CSC? I know what modems are 850 enabled, i have one on my phone, 850 was enabled after i booted it from flashing modem with heimdall
i **00!!# and my band is gsm1900, and when i only WCMA 850 i get no service, ive looked at the aquisition order, which should i prioritize? GSM or UMTS? currently UMTS is, i suppose i'll give it an adjustment...

Related

[FIX] Bell GT-I9000M users that seem to have lost the 850MHZ WCDMA Band

THIS IS FOR PEOPLE THAT HAVE ENTERED THE APN SETTINGS AND CANNOT ACTUALLY CONNECT TO THE 850MHZ BAND
WARNING: FOLLOWING THIS GUIDE WILL WIPE ALL DATA YOUR PHONE (minus the SD Cards)
Flash back to UGJG8 available on samfirmware.com. (Odin 3 + 512 pit)
Open the dialer and enter *#272*xxxx#
The above x's are the current time. So for 2:15pm, you would enter 0215.
Select BMC and then Install.
Wait till the phone reboots.
Your radio should now have the 850mhz band working again.
Feel free to flash back to UGJH2 again.
Just want to add, as long as you flash JUST the code in ODIN you should never lose 850Mhz again after doing this.
Would be nice if we could extract the CSC from the rom and never have to worry about downgrading again if we mess up.
Bumping this as it seems there are still people with the issue...
Sent from my GT-I9000M using XDA App
What is the best way to verify that the phone has lost 850 MHz?
Where does one find the APN settings and where are they entered?
I don't have this issue myself, but it would be very nice if this was a bigger single reference.
EDIT: I missed this, APN settings are here: http://forum.xda-developers.com/showthread.php?t=769400
And does Bell use only 850 MHz for 3G?
Not sure if they ONLY use 850MHZ. When I had the issue I had perfect coverage in the city center. But absolutely none on the outskirts where I live. I couldn't even connect to the network for data calls. After a few hours of messing with it to get it back, I tried what's in my original post and thankfully it worked.
tylerham said:
What is the best way to verify that the phone has lost 850 MHz?
Click to expand...
Click to collapse
key in
*#*#0011#*#*
in the dialpad, and it should show you which UMTS band you're currently using.
It just said
Rejected
when I did that.
Electroz said:
THIS IS FOR PEOPLE THAT HAVE ENTERED THE APN SETTINGS AND CANNOT ACTUALLY CONNECT TO THE 850MHZ BAND
Flash back to UGJG8 available on samfirmwares.com. (Odin 3 + 512 pit)
Click to expand...
Click to collapse
In my experience all you have to do is flash any Bell 2.1 rom again via ODIN to restore your America/Aussie radio, I suggest JH2 instead as the OS and Radio are both newer in that build. You can flash whatever 2.1 ROM you want as long as you don't go to a 2.2 radio you will be fine. I know because this was the first thing I did, and basically one of the big reasons I bought this model, so I can flash away all like a regular i9000m just keeping my bell radio. I'm on AT&T and I get HSPDA/HSPUA 24/7.
You can do this on HTC devices, as they usually just release radios by themself to flash alone via stock recovery/clockwork/whatever. So I was glad to see Samsung didn't jack that around and make one rom use a specific radio only. That would have sucked hard, as you can get better service with others.
tylerham said:
It just said
Rejected
when I did that.
Click to expand...
Click to collapse
oops, my bad.. try *#*#0011#*#*
this does work here, lemme know.
Yep, that works, thanks!
BA_Flash_GOD said:
In my experience all you have to do is flash any Bell 2.1 rom again via ODIN to restore your America/Aussie radio, I suggest JH2 instead as the OS and Radio are both newer in that build. You can flash whatever 2.1 ROM you want as long as you don't go to a 2.2 radio you will be fine. I know because this was the first thing I did, and basically one of the big reasons I bought this model, so I can flash away all like a regular i9000m just keeping my bell radio. I'm on AT&T and I get HSPDA/HSPUA 24/7.
You can do this on HTC devices, as they usually just release radios by themself to flash alone via stock recovery/clockwork/whatever. So I was glad to see Samsung didn't jack that around and make one rom use a specific radio only. That would have sucked hard, as you can get better service with others.
Click to expand...
Click to collapse
Myself, and a couple of other people have had the issue where flashing back to UGJH2 simply does not restore the 850MHZ band, hence this thread. I flashed the new HK JP2 and it worked fine. However, I completely lost connectivity to the 850MHZ band. I flashed back to UGJH2, which did not fix it, went back to the new JP2 again, still nothing. After hours of torture, I finally tried the CSC method in UGJG8 and it worked. 850MHZ restored!
Obviously, you've never had the issue where you've had to use this tutorial. When using UGJH2, which I currently am, you cannot use the *#272*xxxx# code. It simply does not work. However, it does work in UGJG8, and lets you select the BMC CSC which is what fixes the problem.
I do however agree that we should always go with the most recent radio, which is why I went back to UGJH2 after fixing my issue in UGJG8.
I def lost 850 mhz band, i flashed to the new Froyo JPC for a few days and it was a disaster, flashed back to UGJ8 now, and installed BMC, looks good
but one thing bothered me, when I put in the code, above the BMC
It said: Sales Code: KOR
Is that normal, or has JPC transformed my phone to a Korean Model permanently (can this be fixed), and what are the effects of this, will I be able to receive the OTA and flash froyo when its out normally?
Thanks
SS2006 said:
I def lost 850 mhz band, i flashed to the new Froyo JPC for a few days and it was a disaster, flashed back to UGJ8 now, and installed BMC, looks good
but one thing bothered me, when I put in the code, above the BMC
It said: Sales Code: KOR
Is that normal, or has JPC transformed my phone to a Korean Model permanently (can this be fixed), and what are the effects of this, will I be able to receive the OTA and flash froyo when its out normally?
Thanks
Click to expand...
Click to collapse
I'm not sure, sorry. I have not run into the issue myself.
SS2006 said:
I def lost 850 mhz band, i flashed to the new Froyo JPC for a few days and it was a disaster, flashed back to UGJ8 now, and installed BMC, looks good
but one thing bothered me, when I put in the code, above the BMC
It said: Sales Code: KOR
Is that normal, or has JPC transformed my phone to a Korean Model permanently (can this be fixed), and what are the effects of this, will I be able to receive the OTA and flash froyo when its out normally?
Thanks
Click to expand...
Click to collapse
Under the thread about the JPC update they talk about this very issue.
Did you guys flash the CSC and the MODEM or just the CSC for JG8?
Inios said:
Did you guys flash the CSC and the MODEM or just the CSC for JG8?
Click to expand...
Click to collapse
You need the whole rom, CSC and PDA to be able to activate the CSC. Modem shouldn't matter, but I did flash it as well as everything was packaged in a single .tar file for me,
Is it possible to go to XWJM8 without flashing the modem? Or, is there another compatible Bell modem that can be used instead?
I flashed the XXJM4 modem and I'm pretty sure I lost 850MHz.
tylerham said:
Is it possible to go to XWJM8 without flashing the modem? Or, is there another compatible Bell modem that can be used instead?
I flashed the XXJM4 modem and I'm pretty sure I lost 850MHz.
Click to expand...
Click to collapse
I flashed with both jm5 and jm7 and also lost 850. Had to go back to jh2 to get it back
Sent from my GT-I9000M using XDA App
Did you guys flash with the BMC CSC?
I flashed JM8 Code with the JM4 modem and the BMC JH2 CSC and my phone came up with the BMC sales code and Bell APN's. I do have to add the pda.bell apn after. All of the inet ones are there. I have yet to find a CSC that has the pda.bell.ca APN pre-loaded.
Here is a link to different CSC's as well as Richtofen's release.
http://forum.xda-developers.com/showthread.php?t=780867
Banger242 said:
Did you guys flash with the BMC CSC?
I flashed JM8 Code with the JM4 modem and the BMC JH2 CSC and my phone came up with the BMC sales code and Bell APN's. I do have to add the pda.bell apn after. All of the inet ones are there. I have yet to find a CSC that has the pda.bell.ca APN pre-loaded.
Here is a link to different CSC's as well as Richtofen's release.
http://forum.xda-developers.com/showthread.php?t=780867
Click to expand...
Click to collapse
XWJM8 CODE and XXJM4 MODEM work but not properly: they don't let you use 850MHz. I think that on Bell we need to use a UG MODEM.
Maybe Richtofen could split out the MODEM as well as the CSC.

So its JPP modem compatible with the USA or not? I keep reading different info

Hi!
On one thread I read the JPP is only European then on the other it says European and US so has anyone used JPP on the USA without issues? It was rated highest in the thread that listed it as USA so I am hoping it works.
shaolin95 said:
Hi!
On one thread I read the JPP is only European then on the other it says European and US so has anyone used JPP on the USA without issues? It was rated highest in the thread that listed it as USA so I am hoping it works.
Click to expand...
Click to collapse
depends on the service coverage in your area. if your area is mostly all 1900, then you shouldnt have any problems with it
Jpp will work but you have to follow certain steps that noone can fully explain why it works.
Flash to stock
Flash jg8 modem
Flash jpp or jpm
These modems have support for 850 but for wherever reason it is only enabled by flashing the magical jg8 modem first.
Prior to the latest modems, this is what we had to do in order to use i9000 roms when 850 was needed.
After flashing the jg8 modem, allow the phone to boot and obtain a signal, them put the jpp modem in the rom zip in place of the modem.bin that is present. All these modems can be found in the modem thread which I am sure you know of.
Yeah I recall that process before. It seems that at home I dont use 850 but if I am at work I need it. So I cannot just flash JG8 with my current ROM and then JPP I need to go to stock? What stock is this cause stock would be Eclair so not quite sure here
Noone knows why this works but it is the only method that is proven. I don't believe flashing the modem over your current setup will work but you can give it a shot.

CWM flashable radios?

Hi,
I'm under the impression that the radio is different from the modem, therefore my previous efforts to fix a problem with the auto-connection to HSDPA/3G were somewhat in vein. If I am correct in this, it could be the reason that my "phone information" settings won't stick (revert to default) and my phone, once connected to EDGE, will not automatically reconnect to HSDPA/3G.
Would someone be so kind as to point me in the direction of CWM-flashable radios? If needed, I am on the AT&T network (U.S.) with the international GT-I9000. ROM and kernel are in the signature, modem is JPY but flashing to the U.S. modem made no difference.
Thank you for your help or even your attention on the matter. I plan to write this up as a tutorial for this very problem should this solve the issue which I believe it will.
All the information you need is here:
http://forum.xda-developers.com/showpost.php?p=9579987&postcount=11945
It's telling me it's a bad link. I'll try to receive it through search and post the link if I get it.
EDIT: http://forum.xda-developers.com/showpost.php?p=9579987&postcount=11945
I flashed JPP to see if that can fix the issue as it's compatible with the U.S. I'll edit again once I go outside in order to see if it auto connects to HSDPA once I'm out there. It's a good test IMHO as I only have the 1900mhz band of wcdma therefore it doesn't penetrate the walls of my place of work.
edited the post above to fix the URL
I went out and checked. It still requires me to go into wcdma only and then back to wcdma/gsm in order to get hsdpa, also, the changes in phone information still don't stick. I need the actual radio file in a CWM flashable zip. Also, after changing modems to JPP, speed test doesn't work. I'll just uninstall from the market and re-install since the data connection is still works and see if there is any improvement on that front.
Which one is the radio file as opposed to modem file .
jje
EDIT: It's in the modem but not included with the modem as far as I know. Specifically, I need to flash a new Radio Image zip file. I found some through cyanogenmod but I'm not sure if it would be a good idea to use those as they may only be working with cyanogenmod ROMs.
Modems and CSC files flash from an update zip via the rom kitchin .
http://romkitchen.org/
http://forum.xda-developers.com/showthread.php?t=817703
jje
I edited the post. Those modems don't contain an updated radio image or any radio image, i think. It's more a matter of finding the right radio image file to flash.... http://forum.xda-developers.com/showthread.php?t=940095 It's midway through the first post. I'm not sure if I should flash it with Darky's ROM or not since it's cyanogenmod but I think as long as I switch to the JPY modem it should be fine.
Interesting.... I did some reading on the kitchen modems and apparently they flash a new radio image in the modem where others don't. I looked at my status through "about phone" and my IMEI SV changed from 01 to 02. When I get back outside to where I know I have HSDPA access, I will report on whether this fixes the lack of auto connect to HSDPA from EDGE.
There is no such thing as a radio for galaxy s devices, that is a htc phone term.
Instead, we have modems. The issue you're talking about is probably rom related.
Sent from my GT-I9000 using Tapatalk
So, you're saying a re-flash of the ROM then.... I think I've had this issue since Darky's 9.2 and I've flashed through the betas and I'm on 9.3 stable now. I have also done a wipe but not a repartition in Odin. I think Odin is a cleaner install then CWM but it's just so convenient to flash right from the phone. I guess I'll do that then.
Thanks.

[Q] What modems are compatable with stock AT&T FROYO KB1

I am running stock KB1 with injected voodoo lagfix. I am tring to disable the 1900 band and use only the 850 band because I lose service in my area when my phone switches to 1900. This happens every few minutes. right now im using the stock modem that came with KB1 and when I try to enter band selection in the service menu I get a this option is restricted error. Are any of the other modems compatible with KB1 that will bypass this restriction?
Thanks
[email protected] said:
I am running stock KB1 with injected voodoo lagfix. I am tring to disable the 1900 band and use only the 850 band because I lose service in my area when my phone switches to 1900. This happens every few minutes. right now im using the stock modem that came with KB1 and when I try to enter band selection in the service menu I get a this option is restricted error. Are any of the other modems compatible with KB1 that will bypass this restriction?
Thanks
Click to expand...
Click to collapse
Well i just Flashed the UCJI6 modem and it seems to work with KB1 but the band selection is still restricted. Any help would be apreciated.
if you want a good selection of modems you can flash a i9000 reoriented kernel and that will allow you to use i9000 modems ( of which there are many good ones) and still use your current rom.
i've not used stock ROM so look into which kernel is best. read lots and lots.

[Q] t-Mobile 3G USA

Guides I am following:
http://soggycashew.weebly.com/modem-dance.html
https://docs.google.com/document/pub?id=1022rpBQPDZvU0MAa0u6Nuvg3D9TGXrCIxlV8mDjN6us&pli=1
SSN: -I9000GSMH
I was told it is the international edition of the GT-I9000
I am unsure what firmware I started on, i think it was a JVT? I'm unsure, but that doesn't really matter, i used Heimdall, because Odin ALWAYS stops either at Initialization... or Setup Connection..., to flash JVU, then reverted to old USB drivers and used odin to install CF-ROOT JVU(works fine just to flash kernal), so my phone was rooted, i then installed mintberry through CMW AND GOT VERY COMFORTABLE WITH IT, then realized mintberry would not allow me to go into servicemode which would HOPEFULLY get me on T-Mobiles 3G network
So im reading the guide for the modem dance and it asks me to be on UGJL2, TLJL3, UGJK3, UGJK4, modem? firmware? WHAT? i go to http://www.sammobile.com/firmware/ and try to download ANY of the listed firmwares, oh they are all on multiupload links, and they barred themselves from USA ISPs, so i cant download the firmwares, ive searched google, found an unuseable encrypted .rar, woo-hoo... but anyways, i downloaded the appropriate modems, used heimdall to revert back to the "oldest" firmware i can download... JVU (DUMB!!!!!), install cf-root with odin, go to servicemode and enable ONLY WCDMA 850, NO OTHERS ARE STARRED, reboot, *#0011# and it says im on the 1900 band, WTF, i try to install UGJL2, TLJL3, UGJK3, UGJK4 modems through CMW, USB cable NOT plugged in, same results. So I've failed on the 2nd step of the guide...how, i doubt its user error. $*$&#&@#&@ CURSES!!!!! i just tried to follow gamerz-roms guide to flashing his rom, BTW he provides link to mutliupload to d/l JVU, VERY UNIVERSAL, but odin screwed up when i try to install sephamore 2.5, why does odin always screw up? why doesn't anyone update their links? why cant i enable 3g on t-mobile? is there a rom that has WCDMA 850 enabled by default? i could flash my own modem through heimdall, but none seem 850 defaulted, right now im HATEHATING my phone, very frustrated, help me please
Im now trying to install JVU through heimdall, BECAUSE ODIN SUCKS! i replaced the modem file in the JVU package with the modem file in captivate-ugjk3-cwm3.zip...so i guess i'll see what happens
Well it worked once, then i tried again, but with sephamore kernal as replacement, now i get:
Handshaking with Loke...
ERROR: Failed to receive response!
Now what...
So i was able to get heimdall to work by reinstalling the drivers, unplugging usb, and removing the battery for a couple min. and i installed JVU, which i seem to have to default on...now I tried the supplied passwords on sammobile on the encrypted .rar for UGJL2, a us firmware, and one worked! but when i try to flash with odin, its an odin package, i suppose i could load through heimdall, but anyways when i try to flash with odin it fails, as does the other file UGKC1, I9000UGKC1_homebinary.tar, and I9000UGJL2_homebinary_add_param.tar, so is it impossible to revert back? i should be able to do it, maybe i'll repackage these odin files for heimdall...
if i repackage for heimdall im missing boot.bin dbdata.rfs 512.pit and firmware.xml, should i pull these from the heim jvu package i have? merge them with the KG3 files, try installing through heimdall... would that be safe since odin seems to always fail on me?
http://www.darkyrom.com/community/index.php?threads/guide-enable-850mhz-on-any-modem.
oh i should post this list of comptable 850 defaults i found,
[I9000 Modem release dates]
UGKG3 - 07/18/2011 Default 850mhz
BVJJW2 - 05/18/2011 Default 850mhz
TUBJV6 - 05/04/2011 Default 850mhz
TUBJPD - 04/04/2011 Default 850mhz
UGKC1 - 03/04/2011 Default 850mhz
TDVJP9 - 02/15/2011 Default 850mhz
TUBJP9 - 01/28/2011 Default 850mhz
TJJJV5 - 01/15/2011 Default 850mhz
BVJJPG - 01/14/2011 Default 850mhz
BVJJV3 - 01/02/2011 Default 850mhz
UGJL2 - 12/21/2010 Default 850mhz
BVJJPD - 12/13/2010 Default 850mhz
UGJK4 - 11/29/2010 Default 850mhz
UGJK3 - 11/17/2010 Default 850mhz
thank you http://soggycashew.weebly.com/uploads/8/3/8/2/8382536/i9000_release_dates.txt
now i just got UGKG3, latest 850 enabled homebinary.tar. i found a guide, based on a guide i was using, i guess its updated? i try to do modem dance... http://www.darkyrom.com/community/index.php?threads/guide-enable-850mhz-on-any-modem.3334/ is the guide i found, i follow http://soggycashew.weebly.com/ modem dance though, i dont know, we'll see i guess
i wanted to confirm that i flash with repartition uncheck and i dont have to add the 512.pit file correct?
*sigh*BUMP

Categories

Resources