Database Develop

ICS issue

hi guys how r u doing?
i have upgraded my cellphone to ICS and i face this problem which my PC cant recognize the SC card it just shows the internal sd alone without the external sd?
another issue that my gallery dos not show my pic's nether my videos "that installed to the external sd" ...?!!!
plz show me how 2 deal with it..
regards..

What are you using ICS ?

Reflash the rom with a wipe!
If that doesn't work then give us more information like what you were on before?
And how you came to ICS.. Method used wipe no wipe etc.. Did you restore backups?
What Rom are you using?

i think its CNA-1.4.0-galaxysmtd_2...
i came from GB I9000XXJVU " as it weriten in its file"
plz gays ineed that cernal that can remove all kernels to go withe new ones .... coz i got this problem the network signal has gone all by suden

All ics rom have same issue except one ...................................they r not built to read memory card.........only DARK KNIGHT 4 can read memory card but DARK KNIGHT 4 IS FULL of bugs......................................................................

nikhilonlive said:
All ics rom have same issue except one ...................................they r not built to read memory card.........only DARK KNIGHT 4 can read memory card but DARK KNIGHT 4 IS FULL of bugs......................................................................
Click to expand...
Click to collapse
Hmm....can you explain more when you say all ICS rom have the same issue?
I have both my SGS(512mb, yes I know, small) and Tab P1000(4gb) on ICS, and both are not Dark Knight rom...both seems to read the memory card just fine when I mount them as USB storage to my computer... I see both rom and even if within the device it self...I can access them no problem.

Every ICS ROM can read the uSD... Except AOKP I think.
Envoyé depuis mon GT-I9000 avec Tapatalk

thx guys bout now i have another problem plz help after i flashed my cellphone with semaphore ICS kernel the network signal became stronger just for 12 hours but after that the signal disappeared .. i flashed my galaxy to 2.2 ,2.3.6 and CM9 but the problem still "no change"???!! plz guys help.... now i'm withe 2.2 and the signal came back but this time its too weak?? waiting for your replaying
note : my cellphone was locked and i unlocked it with Galaxy S Unlock.. works fine just for 2 weeks then this problem appeared...
and plz i need that tool which can remove all kernels... kernel cleaning script for samsung galaxy s i9000 2.2
regards

plz guys i need your help

not for me
i have been running dark knight since uploaded and ive had few issues nor bugs as for external xd card it can be found in file manager press mnt then emmc and there it is dark knight rocks
nikhilonlive said:
All ics rom have same issue except one ...................................they r not built to read memory card.........only DARK KNIGHT 4 can read memory card but DARK KNIGHT 4 IS FULL of bugs......................................................................
Click to expand...
Click to collapse

I 'm a noob here !!

i will buy a used galaxy tab p1000 next week ... i have lg optimus black and it have no support at all . so i guess i will find alot of support here in galaxy tab forum and alot of roms
i cant understand any thing about flashing - roms- recovery - nightly - rc !!! alot of these stuff i found and alot of download links and alot of names so i get confused and these things become complix for me !!
i want to download ics on my galaxy tab the moment i buy it i don want to work on gingerbird
so i want any one here to help me with this problem ... i need to know these basics , how to , stable rom , etc

also can i use ics my daily use ? from ur usage to the galaxy tab working with ics , is it fast as froyo ? is it totally compatible ? can i run all programs and games ? does it lag alot and force close alot of prog ?

I am using AOKP build 40.
Faster than froyo, a lot more available apps in market because it is ICS.
no FC at all.
EDIT: using your term then, Force Close (FC)
Sent from my GT-P1000 using xda app-developers app

what do u mean with FC ?
can u guide me how to install these rom from the begining steps !!
which one is better AOKP or CyanogenMod ? which is stable and have less problems

i enterd these topics and honstely didnt understand any thing !!
http://forum.xda-developers.com/showthread.php?t=1385153
http://forum.xda-developers.com/showthread.php?t=1523174

You asked me any force close.
I said no FC at all..... FC...force close... got it?
http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
or
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
and missing kernel here
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread JQ1
But since you want ICS, continue reading the guide.
- download ICS (CM9 or AOKP) and gapps-ics and put in external sd card.
- boot to download mode
- you need to use Odin to flash Overcome kerner tar
- once flashed the tab reboots.
- ignore the robotic voice, just force the tab to off
- boot to CWM recover (press vol-up and power )
- flash ICS (CM9 or AOKP)
- after flashing the system will convert your tab to MTD partition, but it will probably bring you to recovery or stuck at boot.
- force reboot to recovery again
- flash ICS again
- immediate after complete, flash gapps
- reboot
You have ICS after a few minutes of booting.

You are here too. Btw thank you for your help last time. Now i want to get cm9 on my tab. I used cubed 3d, it was stable but i really want ics feel. I am currently on froyo and wanting to get cm9 installed. Any help is appreciated.
Sent from my DROID RAZR using xda premium

Hi droidxrooting,
I hope you are comfortable using Heimdall.
The last round you didn't get to use it on linux?
Most of the CDMA guide is using heimdall, some guides on Windows.
The process is similar, you want to flash a kernel that has CWM 5.x and support Ext4 conversion (so called lagfix).
Then flash ICS, the gapps.
there is cyanogenmod wiki too, but I don't know if it is clear or not
http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_Tab_(CDMA)

droidxrooting said:
You are here too. Btw thank you for your help last time. Now i want to get cm9 on my tab. I used cubed 3d, it was stable but i really want ics feel. I am currently on froyo and wanting to get cm9 installed. Any help is appreciated.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
flash cyanogenMod 9 Stable version,.

Now I am very comfortable with heimdall. My first experience was horrible because of the drivers on my PC. I used other computers and it worked like a charm. I can not ask for more.
The problem that I was facing with flashing cm9 over cubed 3d is the error I was getting in cwm. Error 7 installation aborted. I tried to flash other ROMs as well with out any luck. Even after master reset and clearing the caches.
Now I am back to stock and rooted. I need the way to get recovery on my tab. If you can help me it would be great.
Once I get the recovery I think I should be able to flash cm with out any problems.
Sent from my SCH-I800 using xda app-developers app

sorry for the broken link
must be due to the ()
have you checked
http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_Tab_(CDMA)

[NIGHTLY][ROM][4.0.4][IMM76I] CyanogenMod 9 questen

i install cm-9-20120816-NIGHTLY-galaxysmtd at my samsung i9000 s
all fine but when i use camer say Insert an SD card before using the camer. but i have SD card
but when i turn on find card say Preparing card SD,, so smting proble whit camera or?
same when me use Gallery No external storage available.
i already factio reset dont help

Try to flash some other kernel than stock - Semaphore, Devil3 e.g. ... or try reflashing ROM (and gapps), if problem will remain, flash older release of CM9

Hi!
I have flash the last nightly but... Does Twitter push notifications work?. I don't recive any notification. Have a fix?
Thanks!

Google voice search isn't upgrading my native language is finally available and I'd like to try it. Anybody got the new version on cm9?
Sorry wrong topic...
Sent from my GT-I9000 using xda premium

guide me to install ics

asked be4 about which rom is the best one before i bought the galaxy tab
now i bought an used galaxy tab but with good condition so im new here " a noob "
and honestly i get cofused with all the topics and guides and answers ,,, it is like a paradox for me !!!
i want to install AOKP rom but from what i read it require overcome rom be4 i install it ... i need to know why !! my galaxy tab seems to be in stock rom gb why i cant install aokp rom without these dilemma ?
and there are alot of word i dont understand like MTD , modems , drivers , kernals , etc
and also there are liks from overcome are dead ,,, Overcome_7_Series_v4.1.0_Wipe.zip ,,,Overcome_7_Series_v4.1.0_NoWipe.zip,,,Overcome_Kernel_v4.0.0.tar,,,Overcome_Kernel_v4.0.0.zip,,, modems
so if u please guide me how to install it from the beginning to the end i will be very pleased

The why : you need to use CWM to flash ics, and overcome kernel has it.
There are others but the method may not be reliable.
Here to get overcome
Missing pictures can be seen here.
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
and missing kernel here
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Sent from my GT-P1000 using xda app-developers app

links are down !!!
also i need a detailed guide please

Which link are down?
You only need gb stock safe.
Kernel tar is attached in that post I link to.
Detail guide is a PDF in the docs link.
What else you need? All are there.
Sent from my GT-P1000 using xda app-developers app

only gb stock safe ?

what about overcome 7 wipe ? overcome 7 nowipe ?

and what about modems ? which one i use ? or dont use any one ?

Gb stock safe package contains modem.
There is no need to flash overcome rom.
Only up to overcome kernel, you have cwm.
Use that to flash ics.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have clean Gingerbread.
But since you want ICS, continue reading the guide.
- download ICS (CM9 or AOKP) and gapps-ics and put in external sd card.
- boot to download mode
- you need to use Odin to flash Overcome kerner tar
- once flashed the tab reboots.
- ignore the robotic voice, just force the tab to off
- boot to CWM recover (press vol-up and power )
- flash ICS (CM9 or AOKP)
- after flashing the system will convert your tab to MTD partition, but it will probably bring you to recovery or stuck at boot.
- force reboot to recovery again
- flash ICS again
- immediate after complete, flash gapps
- reboot
Sent from my GT-P1000 using xda app-developers app

thanks alooooooot priyana i even dont know how to thank u u did great job for a noob like me ,, may be i will be a developer in the future
now i have ics on my galaxy tab waaay better than stock gb .... but i have some question
1- where is galaxy tab application ? in gb there are alot of application that coes with the firmware like e reader , samsung apps , skitch memo , reader hub , music hub, social hub and alot of apps
2 - camera app didnt work untill i turned on the shutter sound !! and if i use the power button to capture it fc
3- what are these apps Dev tools , Superuser " i heard about it be4 for rooting stuff or smth like that , terminal emulator
4- in settings when i enterd ROM control there are alot of options and settings i dont understand as following ( Lcd density , Gpu clock speed in tablet tweaks , touch screen clock speed , fast charge , all perfomance tab and start-up tweaks ) if there any guide or explanation to these stuff i will be very pleased again
5- how i make the navigation bar buttons bigger ? and switch off vibration in lock screen when moving the cursor

Mohaakotb said:
thanks alooooooot priyana i even dont know how to thank u u did great job for a noob like me ,, may be i will be a developer in the future
now i have ics on my galaxy tab waaay better than stock gb .... but i have some question
1- where is galaxy tab application ? in gb there are alot of application that coes with the firmware like e reader , samsung apps , skitch memo , reader hub , music hub, social hub and alot of apps
2 - camera app didnt work untill i turned on the shutter sound !! and if i use the power button to capture it fc
3- what are these apps Dev tools , Superuser " i heard about it be4 for rooting stuff or smth like that , terminal emulator
4- in settings when i enterd ROM control there are alot of options and settings i dont understand as following ( Lcd density , Gpu clock speed in tablet tweaks , touch screen clock speed , fast charge , all perfomance tab and start-up tweaks ) if there any guide or explanation to these stuff i will be very pleased again
5- how i make the navigation bar buttons bigger ? and switch off vibration in lock screen when moving the cursor
Click to expand...
Click to collapse
Hey, you don't sleep. Do you
Great you are now on AOKP like me. You won't regret.
Grab an external SD and learn to do Android backup from recovery.
And move it to external SD for safe keep.
And also learn titanium backup, also choose to backup to external is better in that one.
Samsung uses touchwiz framework for many of its app. So you can't have them in aosp based rom like cm9 and AOKP, or even miui.
But head to the application and theme sub forum. There are a few that runs.
Camera known issue.
Super user built in. You can now run Titanium backup that requires root.
Or es file explorer my favorite, in root mode and system mounted read write. Terminal too, just type su in the terminal shell and you get root.
Rom control, ask in AOKP thread in dev.
Also nav bar, ask in dev if that can be done.
I mostly run stuff in standard mode.
Sent from my GT-P1000 using xda app-developers app

no i slept
again thank alot
i will ask there

@priyana:
Hi, I have a question, actually two:
1. Does GSM work on AOKP out of the box?
2. Is it supposed to work on CM9 ICS 4.0.4? This is what I have now, 3G works but when I make a call hear the tab ringing but my phone does not.
I bought this baby used in top shape and I would really like to get the phone function working.
Thanks in advance

yes GSM should work on both AOKP and CM9 since they use the same device tree.
I understand Canada has different GSM/UMTS frequency than us in europe/asia/australia ? the default baseband in AOKP and CM9 is JPZ
In your default stock firmware, can you have 3G and also make phone call?
You need the same modem, if you can remember which baseband you are using in stock.
Else we just have to look around what works for you.
Go to the modem thread
http://forum.xda-developers.com/showthread.php?t=1069727
and try get the AT&T modem,
BUT DONT FLASH the zip via CWM in ICS.
backup your /radio/modem.bin first.
just unzip the zip and find the modem.bin and copy and paste to /radio/modem.bin
reboot and check the baseband and try your 3G and call.

Thanks man, I will try it and let you know. I got the unit used and with the mentioned ROM already on it.
The baseband that I have is P1000XXJPZ
Once again, thanks

Hmm, yeah, it didn't work...
I tried the steps found in the Overcome guide and I restocked after that I stopped and tried calling and ... IT WORKED!
I am now rebooting after flashing the overcome kernel (it's doing some conversion to ext3) ...
All that's left after that is to flash the rom... OK, it's booting, let's see what's next
OK CWM recovery does its thing...done, rebooting. Can't wait to try the voice call feature... And it works also!
I am pretty happy with the results of my 15 minutes of work.
Anyone needing stuff, I am ready to help

What radio are you using in overcome?
Sent from my GT-I9300 using xda app-developers app

I am actually using the defaults. It's the same radio as in the previous ROM, JPZ.
Sent from my GT-I9100M using Tapatalk 2

[Q]

So I read up on the comparison of jelly bean to ice cream sandwich and it seems that jelly bean is the better option to chose from. I already have ice cream sandwich on my phone but i want to upgrade to jelly bean. So far when i boot my phone a goole animation boots up (it jus says google in white letters) then it goes to the ics animation. I guess that means i dont have a mod installed because before i had cyanogen mod and that would pop up instead of google. So i just need clear detailed instructions to flash the latest cyanogen mod and JB to my captivate. Any help??

Lance59 said:
So I read up on the comparison of jelly bean to ice cream sandwich and it seems that jelly bean is the better option to chose from. I already have ice cream sandwich on my phone but i want to upgrade to jelly bean. So far when i boot my phone a goole animation boots up (it jus says google in white letters) then it goes to the ics animation. I guess that means i dont have a mod installed because before i had cyanogen mod and that would pop up instead of google. So i just need clear detailed instructions to flash the latest cyanogen mod and JB to my captivate. Any help??
Click to expand...
Click to collapse
It's quite simple actually if you're already on ICS, get the ROM you wish you flash (4.1 if you want stable), put it in your SD card, factory reset, clear cache/dalvik and flash it.
Some of them have more specific instructions but you will find them in the ROM's OP. Either way, it should be quite easy!

ok i see but the thing is i havnt done this in awhile so im a lil foggy on this do you have the links for them? if you do it will be much appreciated!!

Lance59 said:
ok i see but the thing is i havnt done this in awhile so im a lil foggy on this do you have the links for them? if you do it will be much appreciated!!
Click to expand...
Click to collapse
They're all in the Dev section: http://forum.xda-developers.com/forumdisplay.php?f=706
If would suggest AoCP: http://forum.xda-developers.com/showthread.php?t=1870926 but it's personal preference.

Ok its coming back to me now! I use odin to put it on my sd card right??

Lance59 said:
Ok its coming back to me now! I use odin to put it on my sd card right??
Click to expand...
Click to collapse
Nop, simply mount your phone to your PC and transfer the zip on your SD card (internal). Or could dl it directly from your phone.
It's a flashable zip, go in recovery and flash it as per their instructions. There's no need for Odin unless you need to go back to stock (KK4) or flash bootloaders, which you don't.

ok that was a very useful tip this whole time i been afraid to use odin cuz i bricked a phone once using it smh but i think i will use the second link you gave me (AOCP) it was saying something about loosing my camera if i wasnt on the gingerbread bootloaders though

Lance59 said:
ok that was a very useful tip this whole time i been afraid to use odin cuz i bricked a phone once using it smh but i think i will use the second link you gave me (AOCP) it was saying something about loosing my camera if i wasnt on the gingerbread bootloaders though
Click to expand...
Click to collapse
Like i said, you should already have those since you're on ICS
Sent from my SGH-I897 using xda app-developers app

Personally, I just d/l the ROM straight to my phone and cut out a step. Remember, if you are changing Roms, you will need to do a complete wipe cache/data/dalvik. You will need to backup your apps and any info you don't want to lose. Do NOT restore any data as ICS data will not play nice with a JB ROM. Make sure you have the current gapps to flash.
Sent from my Nexus 7 using xda app-developers app

dparrothead1 said:
Personally, I just d/l the ROM straight to my phone and cut out a step. Remember, if you are changing Roms, you will need to do a complete wipe cache/data/dalvik. You will need to backup your apps and any info you don't want to lose. Do NOT restore any data as ICS data will not play nice with a JB ROM. Make sure you have the current gapps to flash.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
You can restore app data, but not system data.
Sent from my SGH-I777 using xda premium