Can anyone teach me how to patch .bin files for flashing with smartflashtool ? Snegovik had succeeded in patching the recovery partition with cwm recovery , but i'm very noob and don't understand anything . There sure is a way to patch those .bin files , if anyone knows how to do it , PLEASE share !
You need Ubuntu or another linux distribution and this link: http://forum.xda-developers.com/showpost.php?p=22329293&postcount=106
Maybe this for extracting kdz files into bin/fls files:
http://forum.xda-developers.com/showpost.php?p=22329293&postcount=106
I already know how to extract the kdz. What I want to do is get the cwm recovery inside the .bin file before flashing into the phone . Or even pushing the su binaries into the .bin file. Thanks for your answer though
Sent from my LG-P970 using xda premium
The first link that nooby posted has the instructions to place cwm inside the bin file.
Trolling in the deep
Did you read my post at all? In the first link you ll find all the commands needed to put cwm inside the bin file. I think you cant add superuser, but I may be wrong...
And you need Ubuntu or another linux to do it.
Thanks ! Sorry for not reading properly
Sent from my LG-P970 using xda premium
zyfkurmom said:
Can anyone teach me how to patch .bin files for flashing with smartflashtool ? Snegovik had succeeded in patching the recovery partition with cwm recovery , but i'm very noob and don't understand anything . There sure is a way to patch those .bin files , if anyone knows how to do it , PLEASE share !
Click to expand...
Click to collapse
Hi, how you can send a link to images into a port of the bin file for recovery.
http://logout.hu/bejegyzes/bubus66/lg_optimus_black_p970_kdz_fajlok_kibontasa_smartfl/hsz_1-100.html
bubus44 said:
Hi, how you can send a link to images into a port of the bin file for recovery.
http://logout.hu/bejegyzes/bubus66/lg_optimus_black_p970_kdz_fajlok_kibontasa_smartfl/hsz_1-100.html
Click to expand...
Click to collapse
Thanks !
Sent from my LG-P970 using xda premium
zyfkurmom said:
Thanks !
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
KDZ send through the race into which you want to make it to the CWM-et I'm doing it for you today. if need be. Which region is yours.
Related
I have a rooted LC1 but when i flashed it, i lost my recovery!
I cant install through ROM Manager
How do i flash recovery?
ROm manager won't work with Note.
How you lost? Have you flashed with mobile odin?
dr.ketan said:
ROm manager won't work with Note.
How you lost? Have you flashed with mobile odin?
Click to expand...
Click to collapse
yep mobile odin, i followed your guide (the one that your download and use in your browser)
1) put into adb
2) flashed zimage to root and install recovery
3) CWM backup
4) download
N7000XXLC1---------2.3.6-------2012 March----------N7000OXALC1-----------Open Europe----------------------------- Download (wipe)
Click to expand...
Click to collapse
5) mobile odin flash (wth everroot etc)
now there is the stock android recovery, i want the CWM-based recovery back
Download cf root lc1 n extract zimage file from it.
Copy zimage to sd card
Open mobile odin, select kernel-point to zimage file you placed
Flash
Sent from my GT-N7000 using xda premium
dr.ketan said:
Download cf root lc1 n extract zimage file from it.
Click to expand...
Click to collapse
can you explain this in more detail please? - i dont wanna flash the wrong thing
Download this download.chainfire.eu/153/CF-Root/SGN/CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5.zip
N extract zimage file from it.
Copy zimage file to sd card
Open mobile odin - select kernel- point to zage file N
Flash
Sent from my GT-N7000 using xda premium
panyan said:
can you explain this in more detail please? - i dont wanna flash the wrong thing
Click to expand...
Click to collapse
Follow the steps mentioned by Dr Ketan above. Use Winrar to extract your zImage file. Or any zipping software u use or comfortable with !
dr.ketan said:
Download this download.chainfire.eu/153/CF-Root/SGN/CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5.zip
N extract zimage file from it.
Copy zimage file to sd card
Open mobile odin - select kernel- point to zage file N
Flash
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
What does "N extract" and "N Flash" mean? Do you mean "AND extract" and "AND flash"?
If I am misunderstanding you or something then I apologize but if you are meaning to say the word "AND" when you use the letter "N" then please use proper grammar as it is quite confusing.
Thanks...
yiannisthegreek said:
What does "N extract" and "N Flash" mean? Do you mean "AND extract" and "AND flash"?
If I am misunderstanding you or something then I apologize but if you are meaning to say the word "AND" when you use the letter "N" then please use proper grammar as it is quite confusing.
Thanks...
Click to expand...
Click to collapse
Jesus! Someone actually went through the trouble to read your post "N" answer your question; "N" you ****ing correct them?
If you know how to use Mobile ODIN, then you know exactly what he was talking about. So you were just being an asshat. I hope you **** up your bootloader.
Sent from my GT-N7000 using Tapatalk
@iyani...bla bla
U R D only person, having difficulty in unserstanding 'N' in my 2500 post.
Sorry will back with correcting my grammar
Sent from my GT-N7000 using xda premium
Just chill, Jesus.
Not everybody here is an English native speaker!
Don't be rude!
I also flashed the latest Kies-able Firmware and lost cwm due to the fact, that I can't inject the cwm with mobile odin pro. It's not like your tutorial (dr.ketan) cos where to get the cwm file you mentioned in there?
You can't extract anything from inside the zImage.
So you have to get the appropriate cf-root kernel,
extract the zImage (with winrar/winzip),
copy it (external or internal sdcard) and
use mobile odin pro ("Open file...", point to the zImage-location) to flash it.
Mobile odin pro checks the file and automatically set it as kernel.
You should check your CSC, cos flashing a multi-CSC is setting it to KOR
(means no kies-kompatibility/-updates).
Use the *2767*4387264636# to display, and *272*IMEI* to change it to your wanted CSC
(this will do a factory reset)!
Regards
Mister_Mxyzptlk said:
Jesus! Someone actually went through the trouble to read your post "N" answer your question; "N" you ****ing correct them?
If you know how to use Mobile ODIN, then you know exactly what he was talking about. So you were just being an asshat. I hope you **** up your bootloader.
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
dr.ketan said:
Download this download.chainfire.eu/153/CF-Root/SGN/CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5.zip
N extract zimage file from it.
Copy zimage file to sd card
Open mobile odin - select kernel- point to zage file N
Flash
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
worked beautifully, thank you
(i use 7-zip )
Hello guys
today my question is so important
I have the kdz file and fls and bin files I want to root them before flashing how??
Sent from my LG-P970 using XDA
hemo-ali said:
Hello guys
today my question is so important
I have the kdz file and fls and bin files I want to root them before flashing how??
Sent from my LG-P970 using XDA
Click to expand...
Click to collapse
I know this method for kdz fileshttp://forum.xda-developers.com/showthread.php?t=1512203 and for bin files just use smartflash and in the end when the phone reboots into recovery you can flash the superuser.zip
http://forum.xda-developers.com/showthread.php?t=
Sent from my LG-P970 using Tapatalk 2
My problem is how to flash the recovery mode by fls and bin files I mean how to flash recovery without rooting do u understand me. Also I'm using special fw because Arabic and rtl support and this fw unrootable with gignger break
Sent from my LG-P970 using XDA
Also in my case with official kdz file(I generated bin and fls files myself with cmd) when I do flashing it doesn't reboot into recovery
Hi kids,
I've just realized I have no idea how to do this. I want to flash v28c baseband over CM10 stable. Can someone please help? I know it's done via Smartflash but I have no idea which files to flash...
Siguiriya said:
Hi kids,
I've just realized I have no idea how to do this. I want to flash v28c baseband over CM10 stable. Can someone please help? I know it's done via Smartflash but I have no idea which files to flash...
Click to expand...
Click to collapse
First extract bin and fls files, then only flash the smaller file of those two. It's around 8MB It's the .fls file.
N00BY0815 said:
First extract bin and fls files, then only flash the smaller file of those two. It's around 8MB It's the .fls file.
Click to expand...
Click to collapse
This is OK ? Flash file fls of v28 with SFT on rom CM10 available ?( phone using rom CM10 ). Thanks !
Thanks nooby, that worked!
Hi !
My Phone is LG P970 , and it always boot loops. i already Reflash it using SFT but still it boot loops. can someone tell me what the problem is? can anyone teach me how to unbrick my phone?
jaywithl said:
Hi !
My Phone is LG P970 , and it always boot loops. i already Reflash it using SFT but still it boot loops. can someone tell me what the problem is? can anyone teach me how to unbrick my phone?
Click to expand...
Click to collapse
Check MD5 sum with the kdz that is downloaded.
or
Make sure you follow the instructions correctly
Or
Flash a patch v20 KDZ and then immediately flash to another ROM (This may be risky to your su)
MinoochX said:
Check MD5 sum with the kdz that is downloaded.
or
Make sure you follow the instructions correctly
Or
Flash a patch v20 KDZ and then immediately flash to another ROM (This may be risky to your su)
Click to expand...
Click to collapse
what do u mean Flash a patch v20? and what is su? and what do u mean by md5 >.< sorry im noob. its my first time. Can u teach me how to fix my phone :/
i moved my thread to the Q/A section sorry for posting my question here >.<
Try another. Kdz with cwm patched and at first recovery flash the costom rom You want. ..hope it helps
Sent from my LG-P970 using xda premium
Guys in the nooby guide in the ICS root section, it says in the instructions flash the .bin file.
Does that mean I only flash the .bin file and not the .fls file?? Last time I done this it put 2.3.4 in my phone!
thanks in advance
nikos550 said:
Guys in the nooby guide in the ICS root section, it says in the instructions flash the .bin file.
Does that mean I only flash the .bin file and not the .fls file?? Last time I done this it put 2.3.4 in my phone!
thanks in advance
Click to expand...
Click to collapse
If you want an ICS ROM, or JB, or higher, you only need to flash the .bin file. If you want a v20/GB ROM, you should flash the v20 baseband as well
Sent from my LG-P970 using xda app-developers app
error in smartflash
N00BY0815 said:
If you want an ICS ROM, or JB, or higher, you only need to flash the .bin file. If you want a v20/GB ROM, you should flash the v20 baseband as well
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Ok Thanks. I've tried pretty much everything, even putting the phone onto the official LG upgrader, the upgrader loses communication while its doing the upgrade, and smartflash comes up with errors and stops. Pretty much stagnant now dont know what to do.
any ideas??
P.S. my phone is dead from yesterday as i tried to stick a new rom in. not working at all!
nikos550 said:
Guys in the nooby guide in the ICS root section, it says in the instructions flash the .bin file.
Does that mean I only flash the .bin file and not the .fls file?? Last time I done this it put 2.3.4 in my phone!
thanks in advance
Click to expand...
Click to collapse
Try to flash Bin & Cp files from Preinstallation for IZS ROM (SmartFlash) HERE : http://huexxxtuff.blogspot.com.es/2013/01/izs-rom-links.html
Make shure to reinstall drivers before.
Then after this flash let it complete boot and then try to flash what you wanted.
Some times PCs are assholes.....and not just the phones....
As for rooting ics, just use http://www.unlockroot.com/ - (with usb debugging on)
Hope it helps, cheers!