Hello everyone,
Like your intro video said, I'm a noob. So I'm here to ask your kind help.
My device is a LG P990, baseband version 1035.21_20110725, kernel version 2.6.32.45-cyanogenmod [email protected] #1 SMP PREEMPT Wed Oct 19 12:17:16 WEST 2011, build number, MIUI-2.3.30, android version 2.3.7.
Yesterday I've decided to try another ROM and switch from my MIUI 2.4.13 to CyanogenMod 7. In CM7 WiFi deos not work, so I decided to put MIUI 2.4.13 on again. After that, whenever I try to switch on my WiFi connection, the phone freeze and I have to pull out the battery and reboot. The reboot don't fix the problem.
I'm actually using MIUI 2.3.30 (last stable mod) on my LG P990.
What I have to do to fix this problem?
EDIT: I've restored the stock ROM, but the problem persists. I think is an HW issue.
Thanks,
Lorenzo
HELLO,
I suggest you to make a data/cahe wipe
go in advance, wipe dalvik cache.
and flash again your rom.
if after that it doesn't work, you go back in CWM, you go in mount/storage, mount system and format system, and then flash again.
NOTICE : it will wipe everything like sms/mms/ etc.
good luck
Related
Hi Everyone,
actually i got a question here, is the Icy Glitch V14 is usable under TeamHackSung ICS ROM Build 15?
currently i using the latest Devil Kernel, but just want to try to play with other kernel as well.
and also, i not sure my step is correct or wrong when i flash from stock kernel to devil kernel.
The step i using is :
1) reboot in recovery mode
2) wipe partition cache
3) wipe kelvik cache
4) install zip from SD card (install devil kerner)
5) reboot phone once install successfully.
its working fine but just want to know more about this
Yes, that is correct (apart from it's actually cache partition and dalvik cache). Personally, I find Devil kernel 14.2 led the best, reflashed back down after using 15. Much more snappy and responsive.
argh...now i found out that my WIFI will ON and OFF for non stop after i turn on WIFI by using devil kernel build 15.
i flashed to glitch V14 now and seem work fine. but i feel like my phone is going become lagger and lagger after i keep on changing and flash the kernel...
I've flashed the latest devil kernel (Devil_15.1_LED2.zip) and after the Modded framework-res.apk for build 15. Apparently it seems that all works, but looking to settings in telephone info I can't read devil kernel nowhere, as you can see from the attached image. Something was wrong in the flash operation?
Yes devil seems the best for me, i got only bootlops with glitch when i tried..
devils works for me, but pawit works well as well
hey guys,
i just have a question in regards to ril installation. im currently using 0823 BB then i switch to 0725 BB. everytime i switch BB, i use getril to install new ril. after ril installation, i reboot the phone and voila... bootloop. any rom i use even cm7 or cm9. is still does the same. i tried to wipe dalvic, wipe cache partition, even factory reset, still on boot loop. the only way to stop that is to install new bb, then install a rom then not to intall new ril.
does anyone experiencing this?
Never had such a problem but have you tried to flash an RIL with CWM ?
I just use this app for RIL's and works great..
https://play.google.com/store/apps/...wxLDEsImNvbS5teXJ0LnJlYWRsZ2VyaWx2ZXJzaW9uIl0.
j_r17ca said:
hey guys,
i just have a question in regards to ril installation. im currently using 0823 BB then i switch to 0725 BB. everytime i switch BB, i use getril to install new ril. after ril installation, i reboot the phone and voila... bootloop. any rom i use even cm7 or cm9. is still does the same. i tried to wipe dalvic, wipe cache partition, even factory reset, still on boot loop. the only way to stop that is to install new bb, then install a rom then not to intall new ril.
does anyone experiencing this?
Click to expand...
Click to collapse
Yes, in fact this is the only issue i have had for real on o2x, i have tried it all and close to solve it, some coffe and check if all permissions are equal, then nvflash froyo rom and update to 20s using official update or kdz update in private. I will let you know, and if you already solved it post solution please btw, if you remember; what exactly did you do before this occured. For me I was trying a cm based rom and changed to su baseband at the same time......ooooohhh, gotta check if my imei have disseapeared too just in case.
I have simillliar problems. When I switch ril with GetRIL I end up in a bootloop an need to flash rom again to get back default RIL (this is why you should tick "Keep RIL after ROM flash"). I updated to latest busybox and the problem seems to have vanished. Maybe try that
Edit: That wasn't it...
first issue. after downloading the update 4.1.2 OTA and trying to install it, it failed to upgrade saying to try kies. tried this 3 times the i gave up and used kies. with kies it succeeded in upgrading to 412. but now after each restart, after the samsung logo it says ,,android is upgrading, starting apps´´ for a few second and starts normally. is this normal? or the os didnt complete the instalation?
2nd issue: yesterday i noticed that my battery charged very slowly, from 1% to 25% in about 3 hours. so i let it charge over night. this morning it was 100 % but when i disconnected the charger it changed to 95%. i restarted the phone 1 minute later (still getting the android is upgrading message) and it showed 92%. since then it stabilised and now drains normally.
my main concern is with the first issue because after the update its worse than before. i read the topic with the complaints about the new update and i´m in the same situation with them.
i dont use a custom rom or have the phone rooted. it was rooted with the exynos abuse app when it had 4.0 but before upgrading i uninstalled it. dont know if this matters in any way.
3rd issue. i was using widgetlocker before the upgrade and after the upgrade it crashes. tried reinstalling it with different versions but it says memory not enough or full or something like that. does anyone have a good version that works with 412? tx!
install safe kernel like philz from here:
http://forum.xda-developers.com/showthread.php?t=1901191
go to recovery mode (volume up+power+Home button) wipe /system /data /preload /cache /dalvik cache
download and install stock rom using pc odin following the how to from here:
http://forum.xda-developers.com/showthread.php?t=1424997
my phone displays in info:
baseband version n7000XXLT3,
kernel version : 3.0.31-1103517 [email protected] #3 smp preempt sat apr20 02:25:55 kst 2013
build number JZO54K.N7000XXLT5 .
is this the necessary kernel? << 12.05.2013 - PhilZ-cwm6 v5.03.0 with CWM 6.0.3.2 based recovery >>
DDLSC - DXLSE - JPLSB - XXLT5 - ZSLO2 Fixed for bootloop
ZCLSF (no bootloop fix, proper default.prop) ?
and ROM? N7000XXLT5 N7000OXXLT2 - Romania (Cosmote). i am in romania but i am on orange not on cosmote,
Hi Guys!
Okay, so I have a problem here. Everytime, I try to flash a rom onto my Galaxy Note, it either gets stuck in a bootloop or most functions don't work (quick functions, WiFi, home button etc.) This is starting to get pretty annoying as I hate stock android and love CyanogenMod. I even tried the new CyanogenMod quick install using the computer client and android app.
I'm not sure if you need to know this but I am running CyanogenMod 10.2 (not fully functioning as problems above occur).
Andoird Version:- 4.3.1
Baseband Version:- N7000XXLT3
Kernel Version:- 3.0.64-CM-gd6f2f4a
Build Number:- cm_n7000-uderdebug 4.3.1 JLS361 28760a496f dev-keys
How do I fix this guys? Really need a solution!
Thanks in advance,
Rohan
sometimes repeated hard reboot (5-6 times) helps till ROM is properly setup.
ashutoshgoyal said:
sometimes repeated hard reboot (5-6 times) helps till ROM is properly setup.
Click to expand...
Click to collapse
Cheers man i'll try this and get back to you
Between each flash of a new ROM you should perform a full wipe before flashing in recovery:
in mounts and storage:
-format /system
-format /preload
-format /data
also you can format cache and dalvik cache(in advanced I believe).
-flash zip (or stock ROM with odin)
-flash gapps if needed
If you don't do those wipes then you will have many bugs, performance issues, battery issues, bootloops, random reboots etc.
Dear XDA Developers, //*Excuse my English :laugh:
I am the owner of the phone samsung galaxy s3 mini GT-l8190. On the phone I installed root and cwm - With any rom installation wasnt problem.
After installing a new kernel to 4.1.2 Official rom (via cwm) see : bitly/1vMGGsk (fill missing dot) Only working backup of official version with less follow-up. I installed new kernel (via odin) from your site (xda..) and the speed of the phone is back to normal. After installing a new rom (CyanogenMod 11) there were problems like: lengthy first load after installation, after restarting the phone does not load the graphical area (desktop) .... jumps messages like: "The process has stopped working .. android. com ".
=======================================
About Device: Now in 4.1.2 samsung official..
Model number: GT-l8190
Android version: 4.1.2
Baseband version: l8190xxamg4
Kernel version: 3.0.31-1332988,[email protected] #2,SMP PREEMPT Sun jul 28 14:54:47,KST 2013
Build number: JZO54K.l810xxamg4
=======================================
I was wondering if could help reinstall COMPLETE OFFICIAL rom on my phone and if you could send me link to this page.
If you could help me I would be grateful! :good:
Have a nice day!
Info
In download mode I have System status Custom , but i have installed backup of my s3 mini stock rom. It is root?
Ok
Now it working for me fine...
Problem solved
I do this: wipe system /wipe cache/ wipe data/ Wipe Dalvik cache and reinstall system via odin.
Probably it was incompatible Gapps!
Thread Solved