[Q] Odin problem - Captivate Q&A, Help & Troubleshooting

tryed to use k12 boogs kernal but it didnt work.,...
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)

Be sure to put the kernel.tar file in the PDA slot of Odin.
U may have to close Odin completely and then start over and after Odin is loaded with kernel then connect ur phone to the computer.
U may have to try a different usb port or even cable.
Again, b sure u r using a .tar file of the kernel.
Sent by XDA Premium App

And if your running windows7, try running as administrator

Related

Com4 in Odin

Hi, I plugged in my galaxy S to try and flash the firmware and in Odin instead of Com7 it says Com4 - what should I do to fix this? Thanks.
jaju123 said:
Hi, I plugged in my galaxy S to try and flash the firmware and in Odin instead of Com7 it says Com4 - what should I do to fix this? Thanks.
Click to expand...
Click to collapse
Kind of interested what made you think it has to be com7?
It can be any - mine is 11.
they saw the tutorial on youtube.
there can be any com port, theres no requirement for the com to be number 7 .
Ah I watched a youtube video. Anyway im using the JM2 firmware from samsung-firmwares.com and when I flash it doesnt even start, just says fail. Ive checked im using everything in the right place but it says this:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Great, now it has got to here:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
It has frozen there and there is no progress bar or anything. Everything is greyed out - what should I do? Im scared
Check your USB Drivers. See if you can see the device in the Device Manager.
If its frozen now just unplug and turn your phone on and off.
Ok so now it shows an icon of a phone connecting to a PC with a danger sign in the middle, no matter if I turn it off or not. Is it bricked or what can I do?
Also it doesnt show up when I plug it back in...#
And now it has frozen again when I try to update the firmware -.-
jaju123 said:
Great, now it has got to here:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
It has frozen there and there is no progress bar or anything. Everything is greyed out - what should I do? Im scared
Click to expand...
Click to collapse
Did you flash with the correct PIT file?
Yeah the 512.pit. Now whenever I try to flash it doesn't get beyond file analysis...
Also, what is a 512 pass?
jaju123 said:
Yeah the 512.pit. Now whenever I try to flash it doesn't get beyond file analysis...
Also, what is a 512 pass?
Click to expand...
Click to collapse
No idea what a 512 pass is.
How long are you waiting for the flash to complete? On some firmwares it can take a long time (5 minutes or so). What settings have you changed in odin?
Your device may also have a hardware fault.
Well it was working fine before I tried to flash it. I would wait for the flash to complete but it does nothing but sit there at this point:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
It does not get further than this. There is no blue bar indicating flash progress or anything, it only stays here.
take off your battery and re-enter the download model,that is my way to get it fixed.
Thanks for your help, I have, but like I said it gets stuck on file analysis...
Thanks guys! I fixed it by running Odin in compatability for XP SP3 and also as an admin. Flash in progress, should work soon
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Leave CS..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Leave CS..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.rfs
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
........................
what the hell is this?!?! HELP! =O
I think you resolved this in another thread.
Please don't cross thread as it confuses people.
I know that, thanks ancient. I'm posting updates on all threads i've asked for help... just 2 though
I was able to return to download mode and flash correctly using odin.
The trick to return to download mode was plugging in the battery WITH volup+power already pressed.....
Thanks to everyone!
Phk
jaju123 said:
Thanks guys! I fixed it by running Odin in compatability for XP SP3 and also as an admin. Flash in progress, should work soon
Click to expand...
Click to collapse
Can you explain exactly the whole process you did?
I still can't get the flashing process to work. I'm able to enter download mode but when it comes to flashing, it says:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
Hey everyone! im not going to fake anything here. just got this phone 3 days ago and finally feeling up to flashing my phone via odin however im completly and utterly stuck. Ive read up to put it in download mode (volup + voldown + power) and im on a screen that has "android system recovery <2e>" with some options and then at the bottom "manual mode"
i already had odin open and then connected the usb cable.. odin seems to recoginize it...
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
but this is all that happens after i click start.. ive read multiple threads and how-to's and its almost like magic that suddenly it just "works" out of the blue for people. am i missing something important here? any help would be great for this newbie from a tilt2
You are in the wrong mode. Vol up + vol down + power is the wrong combo. Try vol down + home + power!
Sent from my GT-I9000 using XDA App

Kernel Panic or Battery

Same post from Odin-1 click thread:
Ok so I tried to install using odin 1.7 with the june factory from sam's firmware from here...
http://www.multiupload.com/MGEJ5CZLWC
after one-click failing on numerous occasions.
1.7 appeared to almost work but I now get a kernel failure upload mode message as it reboots after the ATT logo.
I even tried 1.3 and pretty much the same thing happens. When I use just odin-1 click i don't get the kernel failure but i get a battery image with the circle loader that stops at the 12 o'clock position.
1.7 1og
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> dbdata.rfs
<ID:0/004> factoryfs.rfs
<ID:0/004> param.lfs
<ID:0/004> zImage
<ID:0/004> cache.rfs
<ID:0/004> modem.bin
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
If I use 1-click again I always go back to ATT logo then battery indicator that stops at 12 position. So its either this or kernel error with the 1.7.
I am confused as to what my next step should be. I am also using the home-made jig on a consistent basis.
Well I seemed to have fixed the issue for now by installing I897UCJH3 package with odin 1.7...The Rom is working shotty but at least it still got me back in...who would have thought. I still need to go back to a prior ROM setting to upgrade to developer ROMs but its nice that I was able to resolve this issue for now.

[Q] Cannot restore stock firmware!!

I'm using JI6 2.2 firmware and my device is not rooted. I tried to restore stock firmware using I897UCJF6-final-OCD-REV0.exe but it doesn't work and ODIN shows below messages:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
I can't see any error messages and it seems ODIN didn't do anything to my device. I tried it with my windows 7 PC. Could anyone help me please??
Pull ur battery out, look at the sticker there, and check what the build date is. It should be something like 10.06 or 10.07 or something like this.

[Q] Odin not working - Is phone completely dead?

I was trying to install CM7 from Apex10 and ran the bootloaders and something went wrong.. phone was completely off (nothing just blank, no key combinations worked)
I went to download mode using JIG and tried to go to stock and it kept stuck at this
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
I tried many times, it just stops at this point or later.. but never succeeds..
is this totally gone?
any solution pls?
Thanks.
Try a different usb port , check if ur running odin as admin, try different odin vs. and if it's still a no go try another calbe. It's not totally gone 'till it boots up
Its just stopping at this point:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Sbl.bin
<ID:0/004> boot.bin
<ID:0/004> cache.rfs
<ID:0/004> factoryfs.rfs
Its almost 30min..
Any more ideas...
I had the same thing happening to my phone a lil while back. I've got pass that issue by pulling the cable and the battery, restarting odin and connecting usb to the port that worked in the past (com4 in my case).
Thanks for sticking with me.. I tried another laptop and I was able to get the stock.. Now am more confident to play with this toy..with JIG in hand
Woot +1 on the JIG
Woot for unbrickable mod
Sent from my unbrickable cappy *bam*
ohh yahh me 2!!!!

Can't flash with Odin

Hi,
i installed via Kies recovery the original samsung firmware on my SM-G800F (4.4.2)
after that I tried to install the [G800F][5.1.1][TouchWiz] Tweaked Stock Build, ROOTED with Odin 3.07 but it failed 2 times
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
any suggestions?
Same problem with odin 3.09!
Try with other USB cable. I had the same issue with my tablet and this fix it.
Regards

Categories

Resources