[Q] Need help with custom ROM - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

hello all. I'm new with rooted galaxy note and I don't know what to do now. I rooted my phone yesterday, flashed imilka's CyanogenMod 9 v03 and everything looks fine. But my phone freezes when I connect it to laptop. Then I downloaded some other roms via wifi and tryed to flash. Nothing happens, flashing freezes all times. I recovered to imilka's CyanogenMod 9 v03 and now can't flash no original rom and no custom rom. What can I do?
Sorry for my bad english, I hope u understood

Your only solution is PC Odin..
There is a thread in Development forum has pre rooted stock Gingerbread ROMs, flash one of those
Then go to Chainfire's thread and flash the CF Root kernel for that ROM so you have CWM recovery, use the "already rooted.bat" method described in post #2 in that thread
From there your choice, continue flashing ICS ROMs or go with Gingerbread custom ROMs

thanks for help, but this didn't helped. now my phone restarting while loading :/ any ideas?

Related

[Q] soft bricked tab u.u

My problem is that i flash my tab but, when it boots the os, vibrates once, and then three times (like an app crash, i think)
I change the kernel, then the rom. THEN, i wanted to go back to stock and flashed stock over the other kernel, and other rom.
Now i turn it on, and hangs on the samsung screen, and gives app error.
Right now, i'm downloading the previous rom, 'cause i think i have to flash that rom and then use heimdall to flash the stock kernel.
Any ideas ?
KERNEL: HumberOS 05052011
ROM: HumberOS 1.2.5 i think
SGT P1000L
I just want to flash cf root to flash overcome
Thanks in advance !
Overcome kernel isnt compatible with latin tabs. Get a stock rom for your tab and flash it with repartition. Basically follow instructions on flashing that stock rom. Make sure your tab is fully charged.
check this thread , http://forum.xda-developers.com/showthread.php?t=1133590
THANKS !
DarkPal: Yes ! you are right ! But i never flash that kernel ! I've flashed HumberOS Kernel, wich is compatible with my tab model.
I just refered Overcome 'cause the same developer of HumberOS ported CF Root Kernel (Gingerbread) to P1000L and N, and he tried Overcome and CM7 and he get them runnin' on a latin tab.
I've flashed my tab one, two, three times with repartition. But it's still getting app crash when it boot the OS.
:/
k0sh: I read your guide before posting here, my friend. That's why i know that my tab is only Soft bricked. But i have flashed my tab (with ODIN and the stock ROM for my tab model) a thousand times. I don't work.
Both: Well, the previous ROM (HumberOS 1.2.5 it's a .zip for Cw... if i only can flash a kernel with Cw...)
Maybe i'm just give a try to Heimdall.
Thanks !
Solved
I just flash a stock 2.3 ROM and my tab boots finally (ona complete week turned off D, then CF-root, and now i'm flashing Overcome Hermes... just waiting the initial boot !!!!!!
Thanks a lot !!!!!

flashing a rom....

First of all i explain what i did, i got used captivate from my friend, already updated to 2.2.1 . i love custom roms so for cwm i flashed speedmod kernal and flashed miui rom.my phone performed well on miui rom,as i said i luv roms so for pinaccle rom i flashed my phone with KF1 one click without bootloader with cognition 5 initial kernal.after that my phone gives me graphics issue with colorful lines on screen.so i flashed oneclick JF6 and here is the problem begin now my phone hangs on [email protected] logo bootloop, no any button combo worked for DL method,shows empty bettry sign.so i ordered JIG,now my phone goes to DL .now the problem is i am confused which rom(with or without BL) should i use.plz kindly suggest me what to do now?.
In order to run a Gingerbread Rom, you must have the Gingerbread Bootloaders.
The Roms that you want to flash will have Instructions on how to install, in that Rom's OP. There will be detailed instructions provided by the Developer of that specific Rom.
See here... http://forum.xda-developers.com/showthread.php?t=1300843 for Stock Gingerbread Roms with Bootloaders.

Galaxy S wont boot

Hi guys,
i just got a Galaxy S (international, germany) and wanted to flash Clockwork Mod so i can flash a custom rom (miui). I got it with version 2.2 so i rooted it with z4root 1.3 and then tried RomManager to get CWM on it. But it did always reboot into Samsung stock recovery mode. So i tried this Odin3 1.7 and flashed a Kernel and got into a bootloop (First this one, then i used the one promoted in this video (YouTube Video, description XDA Thread with promoted Kernel. Phone now stuck at booting (isn`t even bootlooping, just stuck at the GALAXY S GT etc. logo. I still can reach the Download Mode.
Can anyone please help how to get at least the phone working again I`m really desperatly.
Greetings from Germany & Merry Christmas
Alch
Install a new Rom with odin will make your phone boot again.
2.2 is probably too old now.
Upgrade to Gingerbread Stock using Odin. Turn on Repartition and follow the instructions to flash.
Download a Custom Kernel for the Gingerbread firmware that you flashed. Every Kernel except the stock comes with CWM Recovery.
Copy the MIUI zip file to sdcard and flash it with recovery. It should boot right up.
If you are still having bootloops, try doing a factory reset and then boot MIUI.
Don't try things that you aren't experienced with.
Anyway, download odin 1.85, flash stock Froyo, launch Kies, update to official Gingerbread, launch Odin, flash Semaphore Kernel and GG.
Merry Christmas!
How can i flash Stock Froyo/Gingerbread trough Odin? Can`t find anything usefull @ google
btw i can reach Recovery Mode (CWM / Speedmonk something)
(Kinda experienced by flashing around with my N1 for around 2 years now, but never heard about this Odin Program)
thanks for help anyway
AlchemistEDW said:
How can i flash Stock Froyo trough Odin? Can`t find anything usefull @ google
(Kinda experienced by flashing around with my N1 for around 2 years now, but never heard about this Odin Program)
Click to expand...
Click to collapse
I am not going to help you with this one. You need to get comfortable with the forum and its contents first. Read all the guides and stickies before proceeding with Firmware flashing. There are many different types of firmwares with Bootloaders which are often dangerous to flash and few without bootloaders. Hence, first go through the guides and go with the flashing only when you are confident that you are doing everything in right order.
http://forum.xda-developers.com/showthread.php?t=1379853
Just do what dhiru1602 says. after you flashed it with the latest Gingerbread ,
flash the cf-root kernel with odin . than download the latest galaxian/semaphore kernel, copy it to your internal sd-card and flash it with the app SGS Kernel Flasher . you can find that app on the market. good luck mate !
Thanks guys, u really saved christmas for me Just booted up the latest Miui Rom!
Happy Holidays
Alch

[Q] i9000 tried to flash CM9...kinda fsck'ed

[email protected],
after successfully flashing CM9 to my Defy I convinced my friend to go to ICS as well...so far so good/bad!
I followed the guide to install CMW recovery and did a backup of the stock ROM.
After this I copied CM9 nightly and the google apps package to the internal memory...apperantely the zip package of the google apps was bad, so i tried to boot into CM9..it took a damn long time, so I removed the battery (OK, bad move...but so be it don't bit*h about it!)..CM9 booted but said someting about "encryption of the storage failed..please do a factory wipe"......I did so, using CWM recovery...which ended me up in a boot loop without having access to CMW recvry.
So I thought, flashing the zImage again with heimdall will have the bootloader rewritten (maybe the 2nd bad move this day) so I can access recovery again...I imagined zImage was kinda like a BIOS of a PC...apparently it is NOT
After some google-f00 I found out I have to flash an official FW from samsung, with repartitioning,using odin, am I right?
But the probel is, that they tell me to do a *#7465625# to find out details about the stock firmware...but this is not bossible because the phone hangs at the galaxy s boot logo.
So my question is...what can I do to access either recovery or the stock firmware with a phone stuck at boot logo (i can boot into download mode) and having only a nandroid backup of the stock rom?
Can anybody tell me what to do without spending 200 coins to obtain another SGS for my friend (Yeah, I told him that the risk is to brick the SGS, but I have a kind of guilty conscience.
Hope someone can help...
Thanks a lot!
Odin doesnt care about whats currently on your phone . Just go to samfirmware. Com, find a nice stock rom (2.3.3) for i9000, and flash it with odin. If you dont know how to use odin: use the search button in the i9000 section ''how to use odin''. keep us updated / or if you have any other questions :thumbup:
Stoux
Edit: Check this thread out http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using xda premium
hey
when i screwed my sgs, odin + darky ressurection rom helped
i can't post a link , google "Darkys_v9.2_Resurrection_Edition.zip" ,though i can't remember if i used that version. some got removed, try to look for a sourceforge link. That still works
and see the reply above how to use odin
Hey,
There are also lots of tutorials on youtube, and other sites to show how to flash an original rom. I also screwed up my install of CM9. And then I followed this guide to get the original rom running again.
w w w.theandroidsoul.com/download-install-xxjvs-firmware-update-galaxy-s-i9000-to-android-2-3-5/
After that, use this link for rooting + CWM:
w w w.theandroidsoul.com/root-xxjvs/
Greets from Holland !
PS: can't link -_- so you have to copy and paste the URL.
Skeesicks said:
[email protected],
after successfully flashing CM9 to my Defy I convinced my friend to go to ICS as well...so far so good/bad!
I followed the guide to install CMW recovery and did a backup of the stock ROM.
After this I copied CM9 nightly and the google apps package to the internal memory...apperantely the zip package of the google apps was bad, so i tried to boot into CM9..it took a damn long time, so I removed the battery (OK, bad move...but so be it don't bit*h about it!)..CM9 booted but said someting about "encryption of the storage failed..please do a factory wipe"......I did so, using CWM recovery...which ended me up in a boot loop without having access to CMW recvry.
So I thought, flashing the zImage again with heimdall will have the bootloader rewritten (maybe the 2nd bad move this day) so I can access recovery again...I imagined zImage was kinda like a BIOS of a PC...apparently it is NOT
After some google-f00 I found out I have to flash an official FW from samsung, with repartitioning,using odin, am I right?
But the probel is, that they tell me to do a *#7465625# to find out details about the stock firmware...but this is not bossible because the phone hangs at the galaxy s boot logo.
So my question is...what can I do to access either recovery or the stock firmware with a phone stuck at boot logo (i can boot into download mode) and having only a nandroid backup of the stock rom?
Can anybody tell me what to do without spending 200 coins to obtain another SGS for my friend (Yeah, I told him that the risk is to brick the SGS, but I have a kind of guilty conscience.
Hope someone can help...
Thanks a lot!
Click to expand...
Click to collapse
hmmm... i read from another site there are some custom rom that requires the phone to be in a rooted stock rom or another custom rom...
example:
to install Galaxy S GT I9000 with Orange Amestris v7.3 ROM Custom Firmware you need to be on stock XWJW1 or XXJVU Firmware since the baseband of "amestris" would be on xwjw1 or xxjvu or custom rom with the same baseband...
what stock rom/firmware the phone was in anyway?im guessing gingerbread stock rom? you still got a chance to update it right since you can access download mode...
from what i can remember, i updated my boyfrnd's s2 from gingerbread to official ics from "sammobile".com (remove quote)
then updated it to a custom rom...
well this might be irrelevant but this is how i updated my galaxy s:
well on my galaxy s i updated it from gingerbread stock rom rooted to gingerbread miui then to ics miui andy's version, since im on ics i have successfully tried different ics custom rom like darknight, slimics, elite etc...
hope this kinda help =]
Thanks a lot...I flashed the original firmware (it didn't start properly, but I don't care) and with this was able to flash the zImage again...then I was able to access bootloader and reinstall CM9

cwn flashing

i am new to rooting and flashing etc.i have a completely rooted galaxy tab p1000(GSM version) running stock 2.2.the only problem is i tried flashing
cwm through odin and CF-Root,but odin always shows a fail and the device goes into soft brick state.i have unbricked the tab,but am i not able to flash cwm because i haave a locked bootloader(i have seen in many forums that say that 2.2 on the tab has a locked bootloader)should i try updating it to 2.3.3 through kies and then root it and then flash cwm through odin?.or should i use the overcome method??(please posta link of the instructions).
also which rom is better cm9 or aokp.
can i also follow the procedure given in the cyanogen mod wiki(pleaase google the link,xda wont allow me to post a link)
another victim of CWM flashing.
I keep repeating myself: Use OVERCOME method
it is 100% tested.
Sorry to point back to your own thread:
http://forum.xda-developers.com/showthread.php?p=30466748#post30466748
I had my reply there about overcome method that you can follow.
Let me know how it goes.

Categories

Resources