is there anyway to connect to internet on my x8 with USB cable ?
just like some htc phones.
You mean: (?)
1. PC -> Phone
2. Phone -> PC
I have done the second way... i do not know about the first one
GreatApo said:
You mean: (?)
1. PC -> Phone
2. Phone -> PC
I have done the second way... i do not know about the first one
Click to expand...
Click to collapse
i means 1. PC -> Phone.
in Htc wildfire there is one way but for x8 ????
Hi, I'm tryin to instal nAa GB kernel, but flashtool doesn't recognize my phone... If I plug the USB it says "device connected with USB debugging off", but it doesn't say the model and in fact when I try to flash it doesn't work. I've installed gordon gates and all the drivers, but it still doesn't work. Any ideas?
what exactly did you do? write all the steps
Ok I think it works now, I needed to switch to MSC mode Thanks anyway
well, the phone needs to be turned off
+ drivers installed,lpl
Sent from my E15i using xda premium
+ holding back button while connecting USB
Is it important how did i send this?
Tommolo said:
Hi, I'm tryin to instal nAa GB kernel, but flashtool doesn't recognize my phone... If I plug the USB it says "device connected with USB debugging off", but it doesn't say the model and in fact when I try to flash it doesn't work. I've installed gordon gates and all the drivers, but it still doesn't work. Any ideas?
Click to expand...
Click to collapse
intall latest drivers and hold back button then connect to the computer....................
if still don't recognize, go to device manager and check there,
I think you don't:laugh: turn on debugging
yeah!
you forget to turn on your debugging!
mark :
allow non market apps
android debugging
install all drivers
x8driver
flashtool\driver
gordons gates
Help.
here is my problem i got the flashtool because i want to downgrade my xperia pro and it connects it detects my device but once i put it into the fastboot to flash it back to its original state it just shows the little pop up that says to connect it to fastboot mode and i do it on the phone the little blue light turns on and stuff but it doesn't recognize it on the flashtool the usb debugging is on and the unknown sources is on as well i want to downgrade the phone because since i upgraded it doesn't let me watch movies on my phone from the internet and i want to root it to if anyone can help it will be much appreciated. thanks :crying:
run ggsetup.exe in flashtool/drivers
then do flashing:laugh:
Awesome!
nag xperia said:
run ggsetup.exe in flashtool/drivers
then do flashing:laugh:
Click to expand...
Click to collapse
Doing this now. Makes Sense! Thank you
phnxme7 said:
Doing this now. Makes Sense! Thank you
Click to expand...
Click to collapse
hi can you please help me flashtool the latest version now can not flash the firmware 2.1.ftf why
ariadelvana said:
hi can you please help me flashtool the latest version now can not flash the firmware 2.1.ftf why
Click to expand...
Click to collapse
make sure if your flash tool not corrupt, disable firewall or antivirus..
install all driver and check your phone
Milandas01 said:
Hello friend, please pay your attention. I'm try to root my canvas hd using sp flash tool. Everything is alright but when I connect my device it's only shows searching. Not detect i also install or uninstall x86 driver hundred times. But problem is same. what is the problem i can't understand :'(
Please please please help
Thank in advance :'(
Click to expand...
Click to collapse
Wrong forum
pooped from my rooted a$$
I am in an awkward situation.
xperia z, 4.2.2 244 rooted stock rom, bootloader locked, usb debug mode off, recovery not installed.
I accidentally corrupted build.prop and the phone bricked.
I cannot use flashtool to flash the stock rom back because usb debug mode is off.
I cannot use Sony update service Pro to force update because it said that "your phone already has the latest available software installed".
I cannot use PC Companion to repair because the software said that "Sony update engine doesn't have software available for your phone".
Please help.
wmiswm said:
I am in an awkward situation.
xperia z, 4.2.2 244 rooted stock rom, bootloader locked, usb debug mode off, recovery not installed.
I accidentally disrupted build.prop and the phone bricked.
I cannot use flashtool to flash the stock rom back because usb debug mode is off.
I cannot use Sony update service Pro to force update because it said that "your phone already has the latest available software installed".
I cannot use PC Companion to repair because the software said that "Sony update engine doesn't have software available for your phone".
Please help.
Click to expand...
Click to collapse
Use PC companion but try use repair phone not update. Wait till all phone model showing up than choose your model phone. btw, your phone must off.
than follow instruction there... wil take 1～2 hour for repair.
Hope you can solve your problem. ill take screen shoot when im home later than post here..
Sent from my C6602 using xda premium
YudiA1 said:
Use PC companion but try use repair phone not update. Wait till all phone model showing up than choose your model phone. btw, your phone must off.
than follow instruction there... wil take 1～2 hour for repair.
Hope you can solve your problem. ill take screen shoot when im home later than post here..
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Thank you very much for your reply. But I am already using the PC Companion repair option, and the response is as stated above.
flashtool is all what you need,read the instructions
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Reply
wmiswm said:
I cannot use flashtool to flash the stock rom back because usb debug mode is off
Click to expand...
Click to collapse
You can use Flashtool to flash stock rom, doesn't matter if usb debug mode is on or off (only needed to install recovery or to root)
Download stock rom, install flashtool + drivers and follow screen instructions.. Good Luck! :good:
J have the same problem, yesterday j installed cyanogenmod, now xperia Z was on SONY logo and j can't flash original firmware on flashtool, j can only flash original kernel, but is still on sony logo
SUS says that hasn't new firmware for my phone.
What can j do ????
Thanks in advance
gm007 said:
flashtool is all what you need,read the instructions
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
many thanks, done.
shysparrow said:
You can use Flashtool to flash stock rom, doesn't matter if usb debug mode is on or off (only needed to install recovery or to root)
Download stock rom, install flashtool + drivers and follow screen instructions.. Good Luck! :good:
Click to expand...
Click to collapse
yes, you are right. Yesterday I check everything on the right panel and it does not work. Today I leave all option unchecked and flash properly. Many thanks anyway.
maxam73 said:
J have the same problem, yesterday j installed cyanogenmod, now xperia Z was on SONY logo and j can't flash original firmware on flashtool, j can only flash original kernel, but is still on sony logo
SUS says that hasn't new firmware for my phone.
What can j do ????
Thanks in advance
Click to expand...
Click to collapse
Just follow the flashtool instruction and re-flash the stock rom first, everything will return to unroot stated. Reroot then and try again.
wmiswm said:
Just follow the flashtool instruction and re-flash the stock rom first, everything will return to unroot stated. Reroot then and try again.
Click to expand...
Click to collapse
Maybe j have other kind of problem, j tried with flashtool but it doesn't start flashing when in flashmode, after a minute phone boots itself continuosly on sony logo.
j tried several times with different PC and different ftf file.
j hope to solve this problem, but how...
maxam73 said:
Maybe j have other kind of problem, j tried with flashtool but it doesn't start flashing when in flashmode, after a minute phone boots itself continuosly on sony logo.
j tried several times with different PC and different ftf file.
j hope to solve this problem, but how...
Click to expand...
Click to collapse
Try this way bro.. Done in many Xperia here..
Solving Bootloop phone/Flash Tool can't Detect your phone.
Your Phone Must Off!! and not connected !!
1. Open Pc Companion
2. Click update on Red ellipse (in Picture 1)
3. Start on Phone/tablet Update (in Picture 2)
4. Click Repair on Next Screen
5. in Next Screen, Read that warning Click Continue if you OK
6. Next Step click on Red Circle than Next...
7. Wait initializing Software (10~30 mnt) or depend your ISP speed
8. After initializin9 All Xperia Phone List Will Show Up.
Choose What Xperia Phone Will you repair ( I choose XZ) than Next..
9. Follow instruction On picture.
( Connect USB on your Phone while Press Vol down )
10. if not Start.. Unplug usb and try plug again ==> same no 9)
11. After start.. Waiting 1~2 Hours till done.
(Read Warning There )
Sent from my C6602 using xda premium
YudiA1 said:
Try this way bro.. Done in many Xperia here..
Solving Bootloop phone/Flash Tool can't Detect your phone.
Your Phone Must Off!! and not connected !!
1. Open Pc Companion
2. Click update on Red ellipse (in Picture 1)
3. Start on Phone/tablet Update (in Picture 2)
4. Click Repair on Next Screen
5. in Next Screen, Read that warning Click Continue if you OK
6. Next Step click on Red Circle than Next...
7. Wait initializing Software (10~30 mnt) or depend your ISP speed
8. After initializin9 All Xperia Phone List Will Show Up.
Choose What Xperia Phone Will you repair ( I choose XZ) than Next..
9. Follow instruction On picture.
( Connect USB on your Phone while Press Vol down )
10. if not Start.. Unplug usb and try plug again ==> same no 9)
11. After start.. Waiting 1~2 Hours till done.
(Read Warning There )
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Solved...j know that phones must be off, the problem was flashtool, j used other version (beta 4) on other pc running xp instead of win7 and all goes good.
Thanks to all for helping me
Doesnt work.
I cant use flashtool, period.
Are there anyother methods?
theVenerable said:
Doesnt work.
I cant use flashtool, period.
Are there anyother methods?
Click to expand...
Click to collapse
The above didn't work for me because I received error based on my type of phone.
This guide however did help: http://forum.xda-developers.com/showthread.php?t=2240614
I had to reboot windows to a settings to enable unsigned drivers. Installed Flashtool and it's drivers,
First unlocked the bootloader(BLU button, got the IMEI, used the sony form (http://unlockbootloader.sonymobile.com/instructions))
Then I downloaded the stock sony xperia z ftf image, placed it in Flashtool's firmware folder, then flashed it (flash device > flash mode).
Now my phone's working again.
HTH,
George
brick,unbrick,xperia z problem,flashtool
My OS phone in recovery mode (root) got deleted And when I turn on phone stuck on Sony logo And when it is connected to the computer showing error your USB not recognized and Flash mode for use Flashtool doesn't work and the same error shows what should i do?
shayanster said:
My OS phone in recovery mode (root) got deleted And when I turn on phone stuck on Sony logo And when it is connected to the computer showing error your USB not recognized and Flash mode for use Flashtool doesn't work and the same error shows what should i do?
Click to expand...
Click to collapse
If you still can enter custom recovery, you only need flash rom and (with) suitable kernel.
If not, you need Flashtool.
- make sure you have the newest version of flashtool and driver
- connect your phone to pc.
- when computer show error about usb not recognized, go to computer management - device manager. Find something in universal serial bus controller list that have yellow triangle and exclamation mark. right click and remove it
- disconnect your phone then reboot your pc
- install flashtool and driver, reboot pc again
- connect your phone to pc. Now, it should detect your phone.
- do flashing procedure
cmiiw
visualfighter said:
If you still can enter custom recovery, you only need flash rom and (with) suitable kernel.
If not, you need Flashtool.
- make sure you have the newest version of flashtool and driver
- connect your phone to pc.
- when computer show error about usb not recognized, go to computer management - device manager. Find something in universal serial bus controller list that have yellow triangle and exclamation mark. right click and remove it
- disconnect your phone then reboot your pc
- install flashtool and driver, reboot pc again
- connect your phone to pc. Now, it should detect your phone.
- do flashing procedure
cmiiw
Click to expand...
Click to collapse
Thanks for the answer I tried all ways but the problem is not solved .I think the only solution is JTAG box
shayanster said:
Thanks for the answer I tried all ways but the problem is not solved .I think the only solution is JTAG box
Click to expand...
Click to collapse
To use Flashtool put phone in flashmode, it will not work in recovery mode
To put phone in flashmode
Hold power + both volume keys
wait till you feel three vibrations.
Make sure you have installed Z drivers flashmode drivers & fastboot drivers(Setup fille is in driver folder of flashtool)
Keep FTF file in firmware folder of flashtool
Start flashtool
Click the thunder button
select flashmode
select the FTF file
When it tells you to connect phone
Hold volume down key and connect USB it should start flashing
androidtweaker1 said:
To use Flashtool put phone in flashmode, it will not work in recovery mode
To put phone in flashmode
Hold power + both volume keys
wait till you feel three vibrations.
Make sure you have installed Z drivers flashmode drivers & fastboot drivers(Setup fille is in driver folder of flashtool)
Keep FTF file in firmware folder of flashtool
Start flashtool
Click the thunder button
select flashmode
select the FTF file
When it tells you to connect phone
Hold volume down key and connect USB it should start flashing
Click to expand...
Click to collapse
when it is connected into flashmode the computer showing error your USB not recognized
shayanster said:
when it is connected into flashmode the computer showing error your USB not recognized
Click to expand...
Click to collapse
Is it Windows 7 or 8?
my phone is not getting into recovery mode i.e,by pressing volume down it is not getting into recovery mode.this problem started after i gave my mobile to the service center
dsrdy1996 said:
my phone is not getting into recovery mode i.e,by pressing volume down it is not getting into recovery mode.this problem started after i gave my mobile to the service center
Click to expand...
Click to collapse
They restore your phone with the ORIGINAL STOCK ROM and everything that your phone has installed (Including Recovery) is lost. You don't have any recovery installed. You have to re-install it again.
Hit thanks if I helped.
After a visit at the mobile center the entire device will be resetted. Meaning official software and no recovery (Sony has no recovery build in so it seems). So yeah, you need to root it again and instal a recovery.
dsrdy1996 said:
my phone is not getting into recovery mode i.e,by pressing volume down it is not getting into recovery mode.this problem started after i gave my mobile to the service center
Click to expand...
Click to collapse
Tech N You said:
They restore your phone with the ORIGINAL STOCK ROM and everything that your phone has installed (Including Recovery) is lost. You don't have any recovery installed. You have to re-install it again.
Hit thanks if I helped.
Click to expand...
Click to collapse
thanks for giving suggestion but iam unable to get into recovery mode after doing what your said.I attached the screen shot of what iam getting.Can u please say the solution by seeing it
dsrdy1996 said:
thanks for giving suggestion but iam unable to get into recovery mode after doing what your said.I attached the screen shot of what iam getting.Can u please say the solution by seeing it
Click to expand...
Click to collapse
Have you enabled USB Debugging option from Developers Option..?
If no then do it. If you cannot see developer options then go to settings -- about phone -- tap o build number 7 times and you'll unlock developer tools option.
Then enable it and then connect your phone to compter via USB and do the necessary steps to flash CWM.
Also you on locked bootloader or unlocked bootloader.?
Tech N You said:
Have you enabled USB Debugging option from Developers Option..?
If no then do it. If you cannot see developer options then go to settings -- about phone -- tap o build number 7 times and you'll unlock developer tools option.
Then enable it and then connect your phone to compter via USB and do the necessary steps to flash CWM.
Also you on locked bootloader or unlocked bootloader.?[/
Click to expand...
Click to collapse
1. Check USB debugging is connected and your PC has properly installed the drivers for your phone. Also make sure your phone has prompted you to authorise the computer you're connected to.
2. Check no ADB is running in task manager before you try this, check flashtool isnt running or anything else that may use ADB (PC companion etc)
3. Try a different recovery
Oh and stupid question but you have re-rooted your phone first right and SuperSU is confirmed working updated and allowing rooted programs to work?
Oblox said:
1. Check USB debugging is connected and your PC has properly installed the drivers for your phone. Also make sure your phone has prompted you to authorise the computer you're connected to.
2. Check no ADB is running in task manager before you try this, check flashtool isnt running or anything else that may use ADB (PC companion etc)
3. Try a different recovery
Oh and stupid question but you have re-rooted your phone first right and SuperSU is confirmed working updated and allowing rooted programs to work?
Click to expand...
Click to collapse
sorry i didnot check usb debugging for installing recovery.Thanx for giving suggestions
Try this step you'll get option
Sent from my C5302 using XDA Free mobile app