Related
Hi All,
I bought the Bell version of the phone (Vibrant) because I wanted the front facing camera... Then unlocked and rooted it and inserted my Rogers SIM and have had no issues for quite a while. I successfully loaded Froyo when it became available on Kies without any sd problems. (had to re-root but no big deal).
Now I understand that Bell has released Gingerbread via Kies, but when I open Kies, it doesn't recognize my firmware at all... just shows blank.
I un-rooted and erased all data to see if that would allow me the upgrade but still nothing...
Can anyone offer any assistance or have the files that I can install using a different method?
Much appreciated,
Jamie
Use the search Luke....
Seriously, there is a huge thread detailing Bell's KG3, including dumps you can flash with Odin instead of using Kies. The best part? Even though it is only 9 posts down from yours, I ever got you the link http://forum.xda-developers.com/showthread.php?t=1211939
If you don't want to use KG3, just flash any of the Gingerbread roms in the development forum and flash an appropriate modem. 99% of those threads include flashing instructions.
shadoslayer said:
Use the search Luke....
Seriously, there is a huge thread detailing Bell's KG3, including dumps you can flash with Odin instead of using Kies. The best part? Even though it is only 9 posts down from yours, I ever got you the link http://forum.xda-developers.com/showthread.php?t=1211939
If you don't want to use KG3, just flash any of the Gingerbread roms in the development forum and flash an appropriate modem. 99% of those threads include flashing instructions.
Click to expand...
Click to collapse
Thanks,
I did read most of that thread but can't find anyone else who's using a Rogers SIM on an i9000m... I don't like or use Kies very often and I'm getting annoyed that it won't seem to even read my current firmware. MyPhoneExplorer seems to read it just fine but Kies seems to only want to be some kind of media toy.
I will borrow a Bell SIM to see if it will recognize long enough to use the Kies update, and if that fails I'll flash with Odin.
I assume I'll have to root again once I flash?
robinsonj said:
I assume I'll have to root again once I flash?
Click to expand...
Click to collapse
Yes you will.
make sure you have the latest version of kies, also make sure your csc is set to BMC (open dialer *#272*"your imei"*), select BMC and isntall that will factory reset your phone btw... after that it should work... I am not sure that a Rogers Sim card is affecting it, have you tried just pulling the SIM altogether and connecting? Are you running any custom ROMs currently or have you in the past? Maybe flash back to UGKC1 with Odin if you are and then use Kies to update.
Ended up finding some detailed instructions on "MostlyIrrelevant" for installing 2.3.4 with a Rogers (and Bell) supported Modem. a couple more steps to install the ROM, but it's a deodexed version of the international release with the bloatware removed and TW Launcher removed and replaced by TouchWiz... nicely also has CWM and Titanium in it too, so flashes are much easier from now on. (small workaround to get Bluetooth working but the solution was also in the comments section.) Next step to get back a couple pieces of Samsung bloatware back on... mostly SocialHub and Samsung e-mail... so I can connect all my contact lists and e-mail accounts into one place. I bookmarked the link to Pharaohnough's posting of the apks for these apps (THANKS!) that I want back but will have to wait 'till after work to try them.
Hi all. Couldn't find any posts about this specific problem so here goes:
I'm trying to CM10 on the following device:
Model number: GT-P1000R
Firmware version: 2.3.3
Baseband version: P1000RUXKG1
Kernel version: 2.6.35.7
Build number: GINGERBREAD.UXKG1
I've rooted the device with CF-Root v3.3 (http://forum.xda-developers.com/showthread.php?t=885734, CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.zip) which installs CWM 3.0.0.5. When I reboot in CWM Recovery mode and try to flash the zip, I get the following error:
assert failed: assert(getprop("ro.product.device") == "galaxytab" || getprop("ro.build.product") == "galaxytab" ||
getprop("ro.product.device") == "GT-P1000" || getprop("ro.build.product") == "GT-P1000");
Click to expand...
Click to collapse
I got around this by removing the assert line from updater-script and reflashing and although I see the logo, I get stuck in a boot loop as it tries to finish. Any way to get CM10 working on my GT-P1000R? No one else seems to have this device (it's GSM on Rogers in Canada).
P1000R is just a normal P1000 (M or R, plain P1000)
I have not tried but I am sure CM10 need CM9 first.
pmdarrow said:
Hi all. Couldn't find any posts about this specific problem so here goes:
I'm trying to CM10 on the following device:
Model number: GT-P1000R
Firmware version: 2.3.3
Baseband version: P1000RUXKG1
Kernel version: 2.6.35.7
Build number: GINGERBREAD.UXKG1
I've rooted the device with CF-Root v3.3 (http://forum.xda-developers.com/showthread.php?t=885734, CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.zip) which installs CWM 3.0.0.5. When I reboot in CWM Recovery mode and try to flash the zip, I get the following error:
I got around this by removing the assert line from updater-script and reflashing and although I see the logo, I get stuck in a boot loop as it tries to finish. Any way to get CM10 working on my GT-P1000R? No one else seems to have this device (it's GSM on Rogers in Canada).
Click to expand...
Click to collapse
i think u need to install overcome kernel firts
Seeking help flashing my SGT P-1000R
"I got around this by removing the assert line from updater-script and reflashing and although I see the logo, I get stuck in a boot loop as it tries to finish. Any way to get CM10 working on my GT-P1000R? No one else seems to have this device (it's GSM on Rogers in Canada)."
I have had the same difficulty flashing the rom for my GT-P1000R, as most roms are designed for the generic GT-P1000 and upon flashing check for the version and stop because ours is specific to Rogers. Exactly what did you do to modify the updater-script and what is the file called in rom ZIP package?
To be honest, ever since I was foolish enough to upgrade to Gingerbread earlier this year I have regretted it, as my Bluetooth no longer works with my HID keyboard. As I believe in going forward is best, I am looking to upgrade to ICS, but as a last resort going back to Froyo (if I can find it) would get me back the functionality I lost.
I would appreciate any help you can provide as I have scoured the net and found very little that deals specifically with our version (GT-P1000R) of the SGT.
Because P1000R= P1000
Sent from my GT-P1000 using xda app-developers app
I am still not able to update my ROM
priyana said:
Because P1000R= P1000
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Perhaps, but every time I try to flash a rom made for a P1000, the install fails indicating in the error message that it has detected my tablet as being a SGT P1000R, hence my original inquiry. I am sure it is simply a question of updating a config file to fool the installer, but which one?
Have you heard of Overcome method?
It will ensure your system is detected as P1000
http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
or
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
and missing kernel here
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Sigh! Mirrors disappearing fast.
Mission Partially Completed.
priyana said:
Have you heard of Overcome method?
It will ensure your system is detected as P1000
http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
or
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
and missing kernel here
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Sigh! Mirrors disappearing fast.
Click to expand...
Click to collapse
Thank you for the links to the Overcome method, and I now have successfully upgraded my former SGT P1000R, Android 2.3.3, to a SGT P1000, Android 2.3.6 - A significant improvement indeed! Unfortunately my test to see if my Bluetooth HID keyboard works with my new and improved SGT came up short - Will pair, but not connect.
After doing some research and coming to the sad conclusion that only an upgrade to ICS will do to get the aforementioned functionality to work, I tried AKOB and CM9 upgrades, following the instructions available. Each and every time I tried the upgrade, the tablet went into an endless loop of reboots indicating an error, which was displayed too quickly to read. I ended up having to restart the Overcome process again to salvage things.
Alas it is late and my quest to get ICS installed on my tablet (unless someone can tell me how to get a connection to my Bluetooth HID keyboard in 2.3.6) will wait for another day. Thanks anyway for the help.
probstc said:
After doing some research and coming to the sad conclusion that only an upgrade to ICS will do to get the aforementioned functionality to work, I tried AKOB and CM9 upgrades, following the instructions available. Each and every time I tried the upgrade, the tablet went into an endless loop of reboots indicating an error, which was displayed too quickly to read. I ended up having to restart the Overcome process again to salvage things.
Click to expand...
Click to collapse
IIRC the endless boot loop is due to the install process complaining that it couldn't find some partitions. When you get to that point you should just reboot to recovery and install the zip again for the 2nd time and it should work then.
I finally have a fully functional SGT P1000, running the latest version of CM9 ICS, and I must say this has breathed new life to my tablet! My sincere thanks for all the assistance I have received, despite what at times must have seemed endless silly questions for the more veteran members here on xda-developers.
Now time to get used to the ICS interface and some of the quirks (e.g. mapping of storage) that come with this new version of Android. However, thanks to the obvious removal of all the "bloatware" that Rogers added, the performance of my tablet is phenomenal! :victory:
Which files for GT-P1000R running on GB2.3.3?
probstc said:
Thank you for the links to the Overcome method, and I now have successfully upgraded my former SGT P1000R, Android 2.3.3, to a SGT P1000, Android 2.3.6 - A significant improvement indeed! Unfortunately my test to see if my Bluetooth HID keyboard works with my new and improved SGT came up short - Will pair, but not connect.
After doing some research and coming to the sad conclusion that only an upgrade to ICS will do to get the aforementioned functionality to work, I tried AKOB and CM9 upgrades, following the instructions available. Each and every time I tried the upgrade, the tablet went into an endless loop of reboots indicating an error, which was displayed too quickly to read. I ended up having to restart the Overcome process again to salvage things.
Alas it is late and my quest to get ICS installed on my tablet (unless someone can tell me how to get a connection to my Bluetooth HID keyboard in 2.3.6) will wait for another day. Thanks anyway for the help.
Click to expand...
Click to collapse
Hi! First of all, thanks for all this information! I Also have a GT-P1000R (Rogers) running on the same gingerbread version UXKG1 and rooted with the original thread. So, literally, my tab is in the EXACT situation from the original thread. I am assuming that in order to flash any custom ROM's, i need my tablet to be recognized as a GT-P1000 . I am reading the manual, and i am wondering which modem to use. Or do I just need to do an update considering I am already running Gingerbread 2.3.3 ? My overall goal is to have my tablet recognized as a GT-P1000 (not with the r) and eventually upgrade to ICS or higher, also for the primary reason of using a bluetooth (hid supported) keyboard...among other things.
I am familiary with Odin and these instructions are great, I am just slightly unclear what to do in the case of already being on gingerbread 2.3.3, but working with a GT-P1000r. Thank you in advance for your help!
---------- Post added at 08:36 PM ---------- Previous post was at 08:25 PM ----------
probstc said:
I finally have a fully functional SGT P1000, running the latest version of CM9 ICS, and I must say this has breathed new life to my tablet! My sincere thanks for all the assistance I have received, despite what at times must have seemed endless silly questions for the more veteran members here on xda-developers.
Now time to get used to the ICS interface and some of the quirks (e.g. mapping of storage) that come with this new version of Android. However, thanks to the obvious removal of all the "bloatware" that Rogers added, the performance of my tablet is phenomenal! :victory:
Click to expand...
Click to collapse
I also posted this above to another reply, but am worried it will get missed.
I have the same table you do (GT-P1000R) with Rogers, and it was rooted with the same file you used in this original thread on UXKG1.
Do you recall if you just had to do an update with overcome (since you were also running 2.3.3 , UXKG1 as per your first post) , or did you do a complete overhaul.
If you had to do the entire process, which modem did you use? these are the options given...
-GSM based GT-P1000 Tab (Asia, Europe, Middle East, Occeania/Africa, rest of world, etc..) : use JPZ MODEM
-North American T-Mobile Tab user: use T-Mobile Modem
-AT&T (USA), Tel Cel , etc - use JK3 modem.
I am assuming i would use the NA Tmobile based, considering Rogers is Canada's 'sister company' to T-Mobile? but i want to be sure...
Thanks for the help..as you know..there isn't a lot of info on GT-P1000R version..
Not quite.
Rogers is using 850/1900 MHz , the same as AT&T USA
the term NA T-Mobile there is to differentiate that with the UK T-Mobile, which use the usual European frequency.
so At&T modem ?
priyana said:
Not quite.
Rogers is using 850/1900 MHz , the same as AT&T USA
the term NA T-Mobile there is to differentiate that with the UK T-Mobile, which use the usual European frequency.
Click to expand...
Click to collapse
Awesome..thanks for clarifying. JUST in case...I will Clarify then that I should use the A&T , etc modem version? Any other tips I should be aware of ...as I am working with a rogers version? Thanks.
Yes, use AT&T modem.
No other tips regarding special treatment, they are identical to normal P1000 except that the modem radio is made to work on 850MHz for the 3G part.
Anything you read about P1000 here applies equally to a P1000R
And you can use the Overcome method to get yourself a CWM recovery to flash ICS.
The link to its latest files and guide is in my signature.
If you are prepared to wipe out everything and start fresh.
Get the GB-stock-safe-v5 package (it has rom, odin, windows drivers, modem files)
and the PDF (read from page 7 onward)
and the Overcome Kernel 4.0 tar format.
Only the kernel, you don't need the Overcome Series 7 rom, if your eventual target is ICS.
Once you completed the step of flashing the kernel, you can reboot to CWM recovery and use that to flash ICS/JB, then its corresponding gapps, and you are done.
Last question...(i hope)
priyana said:
Yes, use AT&T modem.
No other tips regarding special treatment, they are identical to normal P1000 except that the modem radio is made to work on 850MHz for the 3G part.
Anything you read about P1000 here applies equally to a P1000R
And you can use the Overcome method to get yourself a CWM recovery to flash ICS.
The link to its latest files and guide is in my signature.
If you are prepared to wipe out everything and start fresh.
Get the GB-stock-safe-v5 package (it has rom, odin, windows drivers, modem files)
and the PDF (read from page 7 onward)
and the Overcome Kernel 4.0 tar format.
Only the kernel, you don't need the Overcome Series 7 rom, if your eventual target is ICS.
Once you completed the step of flashing the kernel, you can reboot to CWM recovery and use that to flash ICS/JB, then its corresponding gapps, and you are done.
Click to expand...
Click to collapse
This might sound dumb - but because i've boot looped my galaxy s I9000m before (that STUPID m at the end...just like the r for my tab..) .. i want to make sure what exactly will be happening. I am familiar with Odin and flashing kernels, not so much modems...
My end goal is to EVENTUALLY flash ICS or J/B , but i haven't thought that far as to which one to go with, etc..so i might not do that part for another week or so -whenever i have time.
If i only do the instructions you gave me (for the rom, odin , etc) and the kernel, my tab should be all good to still use in the mean time, until i decide to flash ICS or JB?
I'm sorry if this is a dumb question.... I appreciate the assistance, and will be giving 'likes' and donations for SURE for all the help.
Yes, the guide is for Overcome Rom which is stock Samsung based gingerbread Rom.
The look is very closed to stock, but the kernel is improved.
Many are happy with just running it.
Sent from my GT-I9300 using xda app-developers app
I am sorry, but as I read the thread through some more...i am still a bit confused of a couple of things. I know this is really probably a simple process...but bricking my tablet is the last thing i want to do.
Answers to the following would be so helpful:
1) Do I need to install the modem? I am currently on GB 2.3.3 unlocked and rooted. My tablet and root information is the same as the original thread. It is rooted with
CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.zip from the following thread http://forum.xda-developers.com/showthread.php?t=1317384 . I have not installed a modem before..so not exactly sure when/why this should be done and when it is not necessary to. - or do i ONLY need to go into odin and flash the kernel and rom. I am trying to get my tablet to be recognized as just GT-P1000 not with the r. It is the modem that will change how my tablet is recognized?
2) Do I need to insert a SIM card when I flash Overcome modem (if necessary) and kernel and Rom?
I do have a SIM card capable tablet, but I dont actually have a sim card for it. I use WIFI - and tether it from my phone if i need to. My service provider in Canada, Sasktel, blocks SIm cards from being able to use it in more than one device at a time (lame I know) , so buying a SIM card and not using the radio doesn't make sense. that being said , I DO want to be able to use the radio with a SIM card if i need to, like when I travel overseas and purchase one for their carriers.
Thanks again!
Your current rooting method leave your tab as P1000R, that is why I recommended overcome from scratch.
And I didn't know you are rooted and have cwm
Modem is for mobile network.
Wen you flash with Odin "repartition" , your modem will be wiped out.
A modem is required.
if you never use mobile function, any modem will do.
Remember being P1000R, if you are overseas other than with USA at&t, you only get 2G.
In Europe and Asia the UMTS freq is 2100Mhz and your tab is incapable of doing that.
You not need SIM to flash overcome.
Since you have cwm, you can just flash overcome ROM series 7 from cwm. Try that.
Since
Sent from my GT-P1000 using xda app-developers app
There is a really good CM10 (JB) ROM: sapir-rom.blogspot dot com Sorry for this type of link, but I can't post links yet :$
I just just that, went into my already cwm and flashed the rom - must say...impressive! wifi works (connected to two devices for trial, as i've had issues with this in the past) and works great.
Thank you SOOOOOO much for the help on this. you answered sooo many helpful questions.
TBH - i love this ROM , and i would love to keep it as this. but it is does not have HID bluetooth compatibility. any plans for the future to have this available on this ROM?
MY GT-P1000R is now without the stupid "r" !
I've got a Galaxy Tab from when it was release on Orange UK due to at the timew being Staff there and got it for a good deal.
The problem I have is that OUK Tabs only go as far as Froyo and now my apps are starting to not get updated due to the old OS.
So what I'd like to do is turn it into a gereric UK Tab so that I can install the standard Gingerbread firmware. At the moment, I don't want to start playing with different ROMs, just get it to a point where Kies will install the newer official firmware.
I've already got it SIM unlocked (on the off-chance I put a non-Orange SIM in it) but I'm not sure on the rest. I assume I need to root it before I do anything else.
This site is full of good stuff, unfortunately I'm not 100% certain I've understood what I need to do. Is there a step-by-step guide on how I get it turned into a generic model? I don't mind getting my hands dirtying, so am not asking for an app that will do all of it for me (unless of course there is one), I just need some instructions on how to do it.
Thanks in advance.
I would recommend you to use overcome method.
use Odin to flash official stock gingerbread JQ1.
Download GB stock safe v5 and the PDF guide.
jump to page 7 and flash according to the picture.
Sent from my GT-P1000 using xda app-developers app
Hey,
I've got an unlocked i9305 with Optus Australia, and I'd like to share my way to root the phone.
I rooted my i9305 weeks ago, just a simple software with one click, nothing to do with Odin.
I don't know why there's hardly such tool in the xda and many english-based forum, so try this link:
sj.qq.com/root
[Probably you don't understand Chinese language, google-translate the webpage]
Things you need to do:
1.A Windows-based PC
2.Download the tool from the link (Hit the green button not the blue one)
3.Have kies installed (Or you can install the phone driver alone)
4.Enable usb-debug in development option on your i9305
5.BACK UP!
6.Connect your phone with a cable to your PC
7.Use the tool, ONE Click, root your phone successfully
8.After rooting you'll probably find a superuser app in Chinese, don't worry
9.Go downloading the Superuser app in play-store, it can help you to switch to the new SU app.
10.Done!
EDIT:
IF THE FIRMWARE ON YOUR PHONE IS 4.1.2, THIS METHOD WILL NOT WORK.
But you can still root your i9305 running 4.1.2 by flashing a auto-root file through Odin. The name of the file is CF Auto root.
Check this link:
http://m.ibtimes.co.uk/root-galaxys3-lte-i9305-android412-xxbma1-jellybean-426559.html
PS: the 4.1.2 firmware I used is the Nordic one downloaded from sammobile, as this is the only one I found not bundled with a carrier. My phone was originally branded with Optus Australia but uncloked. I'm now glad to see the original Samsung logo instead of the ugly optus logo, when turning on the phone.
======================================================================
HERE COMES MY QUESTION: (SOLVED)
ALREADY SOLVED, EVERYTHING GOES FINE.
My phone is an unlocked one but with an Optus logo when turning it on.
The latest firmware released in Australia for my Optus i9305 is 4.1.1.
So I'm considering manually flashing the German Firmware 4.1.2 downloaded from SamMobile to the phone, through Odin 3.
I want to use the German 4.1.2 firmware because people say it is the unbranded firmware.
But my concern is the CSC, as I hear that CSC is about the location, carrier, and APN settings, etc.
Will it be problematic if I manually upgrade my i9305 to the German 4.1.2 Firmware? I mean problems with carriers, or even brick:silly:
Or any other suggestions if I want to do so?
Any help will be appreciated
everything should be just fine, man, the CSC provided in the German firmware should work ok with u'r phone, but if u notice any issues, you can use this app to change your CSC
if you don't know what to choose, take a look here or here
maranello69 said:
everything should be just fine, man, the CSC provided in the German firmware should work ok with u'r phone, but if u notice any issues, you can use this app to change your CSC
if you don't know what to choose, take a look here or here
Click to expand...
Click to collapse
so will i be able to use the I9305 germany firmware with my I9305T s3 LTE? i am also in australia and have the telstra version of the s3.:silly:
Just wondering where is the link to a non-odin way to root the i9305?
Thanks
sj.qq.com/root
Download the tool from the link above, use google translate
then follow the instruction
cenonmin said:
Just wondering where is the link to a non-odin way to root the i9305?
Thanks
Click to expand...
Click to collapse
Re: [I9305 Simplest Root Guide] & My Question of Updating to Official 4.1.2
BIG THANK! The phone was updates successfully
Sent from my GT-I9305 using xda premium
I have been working on a video to help users root their i9305, I have been busy but the video should be out sometime in early february.
easy root
I just tried to do the method... felt a bit risky as the tool itself was also written in Chinese so but it came up with a large exclamation mark.. so don't think my 9305 4g lte was succesfully rooted.. ...
I got mine through DWI... so Hong Kong.. android 4.1.1 baseband.. I9305ZHALI2, Buid nr.. JRO03C.I9305ZHBLL3
I had hoped to root my phone so I could play around with it and install a new rom..
Any idea why it didnt work?
cheers
Peter
Re: [I9305 Simplest Root Guide] & [SOLVED] My Question of Updating to Official 4.1.2
Hi Peter
That's unusual, I thought it should work for the hongkong version. Make sure you have kies installed, debug mode enabled and ticked the box and had at least 20 per cent battery.
If you are sure that everything was right, first have a look at your app list see if there is big R icon in blue. If not, probably it doesn't work for you.
Then try the other method with odin I posted above It meant to be the root method for 4.1.2, I just updated my i9305 yesterday with the Nordic Firmware 4.1.2 from sammobile, and both the firmware and the root method with Cf auto root worked perfectly.
See the edited part above. Good luck
Sent from my GT-I9305 using xda premium
ZachariahZ said:
Hi Peter
That's unusual, I thought it should work for the hongkong version. Make sure you have kies installed, debug mode enabled and ticked the box and had at least 20 per cent battery.
If you are sure that everything was right, first have a look at your app list see if there is big R icon in blue. If not, probably it doesn't work for you.
Then try the other method with odin I posted above It meant to be the root method for 4.1.2, I just updated my i9305 yesterday with the Nordic Firmware 4.1.2 from sammobile, and both the firmware and the root method with Cf auto root worked perfectly.
See the edited part above. Good luck
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
do you know if that Nordic firmware would work with my I9305T
Re: [I9305 Simplest Root Guide] & [SOLVED] My Question of Updating to Official 4.1.2
I cannot assure you that as I do not have an i9305T to test.
But I have seen people's discussion, and many of them in this forum said that the firmwares are transferable between the i9305 and the one with T.
So I would expect it works, but double check on that, don't risk your phone
Sent from my GT-I9305 using xda premium
Hi. I'm 13 years old and a bit of a n00b so sorry about that, but in a years time my parents will let me buy a new phone for £100 (about $153) or less. So, I saw that several i9000s were being sold used and refurb from amazon UK, so I am thinking about going for that when the time comes. The only thing about it though is that it is only updatable to 2.3.6 gingerbread. I have rooted all the android devices I own so far (Samsung Galaxy Apollo I5800, LG E400 and Nook Simple Touch), and have recently installed cm9 nightly on the lg e4000 and a port of cm 7.2 RC called Kyrillos Rom (great rom, kudos to the developer) and have loved it. So, if I was buying the galaxy S, one of the first things I would want to do with it is to install cm10.1, stable, which is officially compatible with this phone, or whatever the latest version is at time of buying is. Anyway, to do this I need CWM Recovery, and to get that I have to root. I have looked online on many sites including these forums, youtube, etc and the main way to root this phone seems to be to flash the cf-root kernel, using Odin, for gingerbread, or use an update.zip or superoneclick if its running eclair. However, many people have said that they got boot loops using cf-root, and I'd rather not risk that. Also, a couple of extra complications, 1) since I am buying it off of amazon I will not be able to return it because a root method will not work, 2) Because I am buying it in a years time I do not want to be stuck in 2.3.6 when 5.0+ is out.
So, I wanted to ask a question. Could I use a guide like one of these to root my phone. They are essentially thee same thing, just using different root exploits. Would ONE of these definitely work with any of the official baseband versions, because I want to be pretty certain when I buy it that I can get JB.
http://forum.ucweb.com/forum.php?mod=viewthread&tid=65836
http://www.matbra.com/en/2011/04/20/root-manual-do-android/
or something like the above two but using a different exploit (download or guide link please)
I'm not too uncomfortable with basic cmd and adb so it seems the best way for me, as I would be uncomfortable if confronted with boot loops.
It would be great if someone actually has used one of these methods on their stock i9000 devices before. It will have to work with whatever the latest official kies or ota update is because there is no telling which android version my used/refurb device will come with.
I would be really, really grateful if I got a definite solution to this. Thank you in advance for helping and I'm very sorry about the long post.
ps on my lg e400 i tried superoneclick, the run.bat and all the other one click root methods. None of them worked, but manually rooting it5 using adb, cmd and the rageagainstthecage exploit worked perfectly.
too much to read mate, why dont u simplify things here.
bootloop will occur if u flash wrong cfroot its common, no panic, juz find a suitable one n flash it again, ur fone will be rooted
da important thing here is da info of ur device, see setting for info on build number, ur imei, android version, n etc n copy it somewhere, thats da references for knowing ur region base n fone info. but make sure ur own device version before do it (i9000/i9003/i9001/shw m110s/ or etc!)
upgrading also need some confirmation, u can follow any ways in xda provided each of them was doing it with their own experience, but da important thing is u know what u re trying to do, thats all
Sent from my GT-I9000 using xda premium
compacity said:
too much to read mate, why dont u simplify things here.
bootloop will occur if u flash wrong cfroot its common, no panic, juz find a suitable one n flash it again, ur fone will be rooted
da important thing here is da info of ur device, see setting for info on build number, ur imei, android version, n etc n copy it somewhere, thats da references for knowing ur region base n fone info. but make sure ur own device version before do it (i9000/i9003/i9001/shw m110s/ or etc!)
upgrading also need some confirmation, u can follow any ways in xda provided each of them was doing it with their own experience, but da important thing is u know what u re trying to do, thats all
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
So, the people who complain in comments are flashing the wrong one? Is there one for every model (I'd be getting international but I don't know what baseband etc)
Also, I'd love to know if there's any way you can just go back to basics and root using a command line. I'd just feel slightly more comfortable doing it that way.
Sorry about the last long post and thanks for replying so soon
Sorry, one other n00b question
I can look at this page but I do not know which download link applies to which software version, baseband version, etc.
http://forum.xda-developers.com/showthread.php?t=788108
PowerNOOK said:
Sorry, one other n00b question
I can look at this page but I do not know which download link applies to which software version, baseband version, etc.
http://forum.xda-developers.com/showthread.php?t=788108
Click to expand...
Click to collapse
you can use an app to root i9000 or with PC or with a semaphore kernel even , look in My Android collections (link below) under unlock and root section
that looks brilliant. I assume its the link under 2e recovery for the 'i9000 root update.zip' on mediafire.com. I just have a few basic questions to ask.
a) Does this work on 2.3.6 value pack?
b) I'm in the UK so I should be able to update from whatever it comes with (eclair, froyo) to 2.3.6 officially, either OTA or with kies, right?
c) Does this work for all baseband/firmware versions?
d) Can I install this as update.zip with stock samsung recovery?
e) I assume this installs su, busybox and the Superuser apk, does it?
f) After rooting could I download rom manager and use it to flash the appropriate version of cwm recovery?
Sorry about all the n00b questions, but thanks
a) Does this work on 2.3.6 value pack?
sure, but less work involved when you use Framaroot or Z4root app ( its just install app and you are rooted)
b) I'm in the UK so I should be able to update from whatever it comes with (eclair, froyo) to 2.3.6 officially, either OTA or with kies, right?
yep
c) Does this work for all baseband/firmware versions?
Nope...mostly for latest Gingerbread...you may need to find earlier versions of it for earlier ROMs
d) Can I install this as update.zip with stock samsung recovery?
yep, IF you have 2e recovery, but like I said, just install app and you are done
e) I assume this installs su, busybox and the Superuser apk, does it?
SU and superuser are the same, it will install that, busybox you install by downloading from google
f) After rooting could I download rom manager and use it to flash the appropriate version of cwm recovery?
yep, and can also be done by Flashing a kernel with CWM or installing Flasify or Mobile Odin to Flash whatever you want.
sure, but less work involved when you use Framaroot or Z4root app ( its just install app and you are rooted)
OK, thanks so much for this. So, to confirm, I can just use z4root (http://forum.xda-developers.com/showthread.php?t=833953?vm=r&s=1) or framaroot (http://forum.xda-developers.com/showthread.php?t=2130276?vm=r&s=1) on all versions of baseband provided I am running firmware version 2.3.6. One or the other will work, just by installing the APK and tapping some sort of root button. I am familiar with z4root because it worked to root my samsung i5800 when it was on eclair. However, it would not root it after the official upgrade to froyo. Is this the same issue that the galaxy s is faced with. Will I have to somehow downgrade it to eclair if it comes from froyo or gingerbread? Also, framaroot does not say that the galaxy s is supported. Does it work?
Also, one other thing. No offence to chainfire (the root is very impressive and I wouldn't know where to start in making one) but why is it that all the tutorials I have recently seen are using odin and cf-root not z4root or framaroot. Is there a catch, or something.
Anyhow, thanks very much for answering. Sorry about yet more n00bish questions.
ps Also, just for the record, what is 2e recovery. Is it stock?
I can just use z4root (http://forum.xda-developers.com/showthread.php?t=833953?vm=r&s=1) or framaroot (http://forum.xda-developers.com/showthread.php?t=2130276?vm=r&s=1) on all versions of baseband provided I am running firmware version 2.3.6. One or the other will work, just by installing the APK and tapping some sort of root button.
yep, but stick to Framaroot a it was only released in 2013, whereas Z4root was in 2010
I am familiar with z4root because it worked to root my samsung i5800 when it was on eclair. However, it would not root it after the official upgrade to froyo. Is this the same issue that the galaxy s is faced with.
The above link you posted will tell you it is compatible with 19000
Will I have to somehow downgrade it to eclair if it comes from froyo or gingerbread?
Don't waste your time downgrading, upgrade to gingerbread and than root with framaroot
Also, framaroot does not say that the galaxy s is supported. Does it work?
Read the link you posted it is compatible with i9000 and users have used it successfully
Also, one other thing. No offence to chainfire (the root is very impressive and I wouldn't know where to start in making one) but why is it that all the tutorials I have recently seen are using odin and cf-root not z4root or framaroot. Is there a catch, or something.
Nope Framaroot only came out February 2013, so very few are aware of it and CF rooting kernel was sort of the first to come out and semaphore rooting kernel later, and is also popular kernels have added features, where rooting apps only place SU into your system.
ps Also, just for the record, what is 2e recovery. Is it stock?
yep, but not all phones have 2e recovery, they mostly have 3e recovery, which does not give you the option to flash updates
Sorry about the Framaroot thing, I missed the galaxy S when scrolling down fast - derp. So, its as simple as downloading the APK, transferring it to the phone, installing it, tapping the right root method, rebooting, installing rom manager or something like it, flashing cwm recovery with it, downloading the latest version of cm, making a nandroid backup and flashing the .zip from the sd card using cwm to get cyanogenmod on this phone.
Also, a question of opinion, next year I will have a £100 budget to get a new sim free or payg smartphone with. I will see if I can get a refurbished s3, but it probably will not hit this price point. Do you think the i9000 refurbished would be a good choice for this budget, particularly if I then root it with framaroot and installing cm
Thanks for all your help and for the quick reply.
Sorry about being a n00b, I am learning...
So, its as simple as downloading the APK, transferring it to the phone, installing it, tapping the right root method, rebooting, installing rom manager or something like it, flashing cwm recovery with it, downloading the latest version of cm, making a nandroid backup and flashing the .zip from the sd card using cwm to get cyanogenmod on this phone.
yep, these days its that simple but was not like that before
Also, a question of opinion, next year I will have a £100 budget to get a new sim free or payg smartphone with.
well, next year is still to come , so the way things are going, you might even get an S3 for that price
xsenman said:
So, its as simple as downloading the APK, transferring it to the phone, installing it, tapping the right root method, rebooting, installing rom manager or something like it, flashing cwm recovery with it, downloading the latest version of cm, making a nandroid backup and flashing the .zip from the sd card using cwm to get cyanogenmod on this phone.
yep, these days its that simple but was not like that before
Also, a question of opinion, next year I will have a £100 budget to get a new sim free or payg smartphone with.
well, next year is still to come , so the way things are going, you might even get an S3 for that price
Click to expand...
Click to collapse
Well hopefully I can get an s3 :fingers-crossed:, but whatever I get, the S is an awesome phone. We wouldn't have the nexus s, s2, s3, s4 etc without it.
Thanks for helping me, I'm not scared of Odin, but I tend to try to avoid it if there's another possible way.
I think, for someone like me, who is probably not going to stay stock for more than about a week, its better to get an older high-range phone than a brand new low range phone.
So, I think that's probably the end of this thread. Thanks to everyone who helped me.