I am having a weird issue. When i flash a custom rom I only have about 1 or 2 bars of signal. I have tried both holics and dark raider and i have the same issue with both. I am currently running the stock rom and I have 4 bars of signal. Can anyone help me with this??
I know the *#*# trick and i am on lte and i have the correct apn settings for the phone. I am lost. I do have a refurb phone and dont know if that would have anything to do with it at all.
Related
I keep losing my 3G at work where it used to be full bars all day. Now it seems to be one or two bars and it drops to 2G most of the day now
I flashed the new radio but have now gone back to 26I as I thought it could be that. I am on Cyan's latest - reflashed after a full wipe.
What could be causing this? It seems no matter where I am the 3G signal is dropped throughout the day.
Has to be the radio or ROM?
Could it be the APN settings?
Is this a rom specific issue?
I don't know if it's a ROM issue or not. I haven't seen any faults in the cyanogen thread about this...
Hey guys,
I have flashed to many different roms with my CDMA diamond. With any ROM such as my current - Energy ROM, I have low signal strength displayed where I used to normally have almost if not full signal strength. I am currently using the updated Telus RADIO, I have tried the Alltel 1.12.20 F and the new Sprint 1.12.34 F, same thing. I have also flashed to the new Pegasus Premium 6.5.1, fearless rom, mightrom, moonscape.....
I have had a displayed low signal strength for each and every one of these. Just wondering if anyone else has this problem?
robvrecic12 said:
Hey guys,
I have flashed to many different roms with my CDMA diamond. With any ROM such as my current - Energy ROM, I have low signal strength displayed where I used to normally have almost if not full signal strength. I am currently using the updated Telus RADIO, I have tried the Alltel 1.12.20 F and the new Sprint 1.12.34 F, same thing. I have also flashed to the new Pegasus Premium 6.5.1, fearless rom, mightrom, moonscape.....
I have had a displayed low signal strength for each and every one of these. Just wondering if anyone else has this problem?
Click to expand...
Click to collapse
Maybe the antenna has a bad connection or not one at all. I would just take it apart and take a look, Unless its under warranty.
(Screenshot attached at bottom)
Hi,
For some reason, the reported signal strength is completely wrong. This doesn't effect calls or anything but it will always show that I have full signal.
When I go into settings you can see that the value reported is very very high as well.
Due to my low post count, I can't ask in the actual thread but I did I search and no one else seems to have the problem.
I've tried a full wipe, and flashing the latest radio (LP1) but problem persists.
Does anyone else have a similar problem, or know of a fix ?
Well it says you are on GPRS which I don't think would have very good signal? But you should know that AOSP roms show your DATA signal on the bars.
Sent from my GT-N7000 using xda premium
I've just walked outside where I get full 3G, and the problem still persists.
Confused as to what is causing it!
Hey guys I just got my new Raider LTE from bell yesterday, and decided to flash this rom "VJRaider ROM for HTC Raider/Vivid/Holiday"
I was just wondering if anyone else on the bell or any other network using this rom and the required kernel are having issues with connection speeds? I notice too that it jumps alot between 3g and hspa alot too, most I have gotten is 1.5 mbps on a speedtest.
Tested my Atrix and I got 14 mpbs same area and coverage.
Any help would be greatly appreciated.
Cheers
I guess the first question would be did you flash through fastboot on PC or using a different method?
Which of cache/dalvik/data did you wipe prior to installing the ROM?
Did you make sure the APN info in the Raider is consistent with the Atrix?
Natas82 said:
Hey guys I just got my new Raider LTE from bell yesterday, and decided to flash this rom "VJRaider ROM for HTC Raider/Vivid/Holiday"
I was just wondering if anyone else on the bell or any other network using this rom and the required kernel are having issues with connection speeds? I notice too that it jumps alot between 3g and hspa alot too, most I have gotten is 1.5 mbps on a speedtest.
Tested my Atrix and I got 14 mpbs same area and coverage.
Any help would be greatly appreciated.
Cheers
Click to expand...
Click to collapse
The 3G/H flicker thing is a know bug, even stock ROM has it, the difference is that stock ROM only shows 4G icon for every type of network, no matter if you are on a 3G, HSPA, HSPA+ or 4G network, it will always show the 4G icon.
For the speed you can check your APNs, it must be a different one from the one you are using on your Atrix. Try to delete every APN and create new ones based on the Atrix ones.
Awesome thanks guys, I had flashed back to stock to try and fix it, I also changed the apn settings and it seemed to make no difference, Bell uses some hybrid network so that could possibly have had am effect. Flashing back to custom Rom now that I know its a known issue.
Cheers
You could also try changing MTU through ifconfig, but this could cause reliability issues. So far, I've only changed MTU on the 802.11 radio for this phone.
So, this is my problem... I have a regular international factory unlocked n7000. And when im in 2g+3g network mode(hsdpa+hsupa) my calls keep droping after a minute, couple of seconds- no significant patterns... I think it could be beacause of the network signal change (weaker or stronger signal- from h to 3g or 2g) . when im on 2g only everything is normal, no dropped calls...Curently im on PA 2.99+ rom and lsc modem , but even when i was on gingerbread and ics i had such problems... I tried different kernels, roms, modems...
I even had that issue on my i9100...
Does anyone else have similar problems, and a possible solution?
Sent from my GT-N7000 using xda app-developers app