Database Develop

No data connection??

I went out an purchased an HTC Raider from Rogers to replace my Bell S2.
I did the HTC Dev unlocked the the phone and rooted it. I applied the ICS update to the phone from Rogers. With the exception of the phone being Rooted - everything is stock.
I can make phone calls, send texts - no issues. I can't get the data to work. I've set the connection to use HSPA and GSM only. I use Petro Canada Mobility with ProxyDroid (I've always used this with no issues and I don't abuse the service and it is has worked on every android phone I've owned).
I've added the exact APN settingsand it doesn't work! I have done everything that I can think of and right now I am beating my head against a brick wall.
APN : goam.com
proxy : 10.128.1.69
port:80
username: wapuser1
password: wap
Server : (leave whatever is default)
MMSC http:/mms.gprs.rogers.com
MMS proxy 10.128.1.69
MMS port 80
MCC 302
MNC 720
Authentication type None
APN type : (leave whatever is default)
The following is set in ProxyDroid:
proxy : 10.128.1.69
port:80
username: wapuser1
password: wap
I have it set to come on once the wireless is off.
Can anyone help please?

Silly question, but if the apn settings accept the proxy info, what do you need proxydroid for?
Sent from my HTC Raider

Well, just go to your carrier and ask for an LTE compatible sim AMD also to set up your line for LTE
There is no cost go doing the above, the plan stays the same...only difference is you will have LTE
Sent from my HTC PH39100 using Tapatalk 2

[Q] Weird Net10 internet issue

I have an unlocked Bell Atrix HD and I'm using it with the NET10 AT&T SIM. I followed the NET10 APN setting instructions and it told me to use the following:
Name: net10
APN: att.mvno
Proxy: proxy.mvno.tracfone.com
Port: 80
MMSC: mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port: 80
I tried those settings and had no internet and no MMS. I removed the proxy and MMS proxy. I also tried removing the port for internet and MMS. Neither combination worked. I double checked my phone was unlocked by doing volume down + power and it says 'unlocked' on a black screen with white letters. I start trying all types of settings until I gave the T-Mobile APN a try (wap.tracfone). Internet worked immediately. MMS still doesn't work. I tried the T-Mobile and AT&T MMS settings with no luck. I did a speed test while tethering and it says AT&T Wireless Network Services so I know the SIM is for AT&T, plus the APN settings default to AT&T if I do restore default settings. I'm confused why the only APN that works is the T-Mobile 'wap.tracfone' one.
Anyone have good knowledge about this who is able to help me out?
I called NET10 and lets just say I have nothing to say about that..lol
Thanks,
Alex

Dude I'm having the same issues I have been scouring the internet forms fix I havent one yet either
Sent from my HTC One X using xda app-developers app

alexv305 said:
I have an unlocked Bell Atrix HD and I'm using it with the NET10 AT&T SIM. I followed the NET10 APN setting instructions and it told me to use the following:
Name: net10
APN: att.mvno
Proxy: proxy.mvno.tracfone.com
Port: 80
MMSC: mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port: 80
I tried those settings and had no internet and no MMS. I removed the proxy and MMS proxy. I also tried removing the port for internet and MMS. Neither combination worked. I double checked my phone was unlocked by doing volume down + power and it says 'unlocked' on a black screen with white letters. I start trying all types of settings until I gave the T-Mobile APN a try (wap.tracfone). Internet worked immediately. MMS still doesn't work. I tried the T-Mobile and AT&T MMS settings with no luck. I did a speed test while tethering and it says AT&T Wireless Network Services so I know the SIM is for AT&T, plus the APN settings default to AT&T if I do restore default settings. I'm confused why the only APN that works is the T-Mobile 'wap.tracfone' one.
Anyone have good knowledge about this who is able to help me out?
I called NET10 and lets just say I have nothing to say about that..lol
Thanks,
Alex
Click to expand...
Click to collapse
Try taking your first proxy setting out (leave blank the one just under "APN") leave your MMS proxy as-is,
MMSC Should be http://mmsc.Cingular.com (type in the http:// that you left out)
For "MCC" use 310
For "MNC" use 410
See if that works for you
Sent from my A200 using xda premium

Hey there ATGadmin... i have an atrix 2 and just started with net10 yesterday and the data isnt working for me after nuuuumerous attempts at mixing and matching the different numbers, i dont understand the people on the phone when i call net10 so i cant really go that route. the way you suggested didnt work for me...can you help////?
ATGAdmin said:
Try taking your first proxy setting out (leave blank the one just under "APN") leave your MMS proxy as-is,
MMSC Should be http://mmsc.Cingular.com (type in the http:// that you left out)
For "MCC" use 310
For "MNC" use 410
See if that works for you
Sent from my A200 using xda premium
Click to expand...
Click to collapse

Have you guys set the APN type. My atrix HD wasn't getting data until I set it to the same as the stock att one except for DUN. After doing that and a reboot. It worked flawlessly.
note: the speed test app will not work for some reason. Only upload will register. If u want to run a speed test install flash for JB and go to speedtest.net.
Sent from my MB886 using xda premium

Anybody try setting up with tweeker apn internet?download from market,turn on Wi-Fi and download the settings. it should work just fine.
Sent from my MB886 using xda app-developers app

this works for me
create a new apn leave proxy blank dont mess with anything but listed below. it has been recently changed on the straight talk net 10 website
Name straight talk or net10
apn att.mvno
port 80
mmsc xda forum wouldnt let me post an address but in this space is mmsc.cingular
mms proxy: 66.209.11.33
mms port: 80

[Q] ATT Vivid on Tmobile... 3g? 4g?

I plan on getting a Tmobile sim card and tossing it in my Vivid, getting the $30 a month plan and using it till I get a different phone.
Any chance I can use 3g or 4g on it? I've heard mixed answers about it being possible as recently Tmobile "flipped their network" or something like that. Just curious if it as ALL possible to get 3g or 4g data on mah vivid. Thanks

HSDPA working here on a HTC Vivid on T-Mobile
http://forum.xda-developers.com/show...8&postcount=12
and as for recently flipping the switch..i've had 3g-4g for the last 6 months with this phone on t-mobile

imranh101 said:
I plan on getting a Tmobile sim card and tossing it in my Vivid, getting the $30 a month plan and using it till I get a different phone.
Any chance I can use 3g or 4g on it? I've heard mixed answers about it being possible as recently Tmobile "flipped their network" or something like that. Just curious if it as ALL possible to get 3g or 4g data on mah vivid. Thanks
Click to expand...
Click to collapse
Wolf61477 said:
HSDPA working here on a HTC Vivid on T-Mobile
http://forum.xda-developers.com/show...8&postcount=12
and as for recently flipping the switch..i've had 3g-4g for the last 6 months with this phone on t-mobile
Click to expand...
Click to collapse
In case you still need help, here is what I suggest:
For the unlock, use unlockusa.com to get your code. They're the fastest and most reliable on the market.
For the internet, use the following settings for your APN (Credits: http://htcsource.com/2012/08/how-to-sim-unlock-the-htc-vivid-and-add-t-mobiles-access-point/) :
Name: T-Mobile.com
APN: fast.t-mobile.com
Proxy: Not Set
Port: Not Set
Username: Not Set
Password: Not Set
Server: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: 261.155.165.50
MMS port: Not Set
MMS protocol: WAP 2.0
MCC:310
MNC: 260
Authentication type; Not Set
APN type: default
APN enable/disable: Checked
Bearer:Unspecified
Enjoy your cool phone !
I hope that helps. It worked for me, as I was having the same issue.

[Q] i9305 and LTE help on Virgin (Canada)

Hey guys,
I switched over to Virgin yesterday on the "Gold" plan for 60$/month. (I don't see the word "LTE" anywhere on my account.. is that an issue?)
Brought in my own phone the i9305.
I live in Ottawa, however I can not get LTE for the life of me. Even traveled well around the city today, and no LTE just HSPA.
SIM card is red with white LTE lettering on it.
APN settings:
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: httpeditedsoicanpost.mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MMS protocol: WAP 2.0
MCC : 302
MNC : 610
APN type : <Not set>
(tried Virgin's mobile settings, however I can't send MMS with Virgin APN settings)
phone is obviously unlocked.
The only thing I can think of is that the 2600 Mhz lte band hasn't been deployed yet in Ottawa, so my phone can't pick it up, until that switch is made over. Thoughts? I AM living in the coverage area where the 150 mbps service is being offered.

We can't help you in this forum...you need to post in the i9305 q&a

Thread moved to proper forum.

bobo89 said:
Hey guys,
I switched over to Virgin yesterday on the "Gold" plan for 60$/month. (I don't see the word "LTE" anywhere on my account.. is that an issue?)
Brought in my own phone the i9305.
I live in Ottawa, however I can not get LTE for the life of me. Even traveled well around the city today, and no LTE just HSPA.
SIM card is red with white LTE lettering on it.
APN settings:
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: httpeditedsoicanpost.mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MMS protocol: WAP 2.0
MCC : 302
MNC : 610
APN type : <Not set>
(tried Virgin's mobile settings, however I can't send MMS with Virgin APN settings)
phone is obviously unlocked.
The only thing I can think of is that the 2600 Mhz lte band hasn't been deployed yet in Ottawa, so my phone can't pick it up, until that switch is made over. Thoughts? I AM living in the coverage area where the 150 mbps service is being offered.
Click to expand...
Click to collapse
Weird issue but it's a small chance that is a modem / CSC related. If you have root access, than reboot into recovery and use this https://www.dropbox.com/sh/qnj68mzs8h3rhk6/qZESHfTord. It'll change your CSC to BMC, is a Canadian Bell HD VOICE should be enabled as well
If this doesn't help, try to change modem...

Thanks for the reply. I reprovisioned the account, changed a new LTE sim, and flashed the HD voice options (you took care of that for me in your thread, thanks)
Still no LTE.
Will try some modems tonight.
A question no one can answer (virgin tech support, or their techs ) does the bell (virgin) lte frequency support this phone, on lte .
Thanks guys.
Sent from my GT-I9305 using xda app-developers app

bobo89 said:
Thanks for the reply. I reprovisioned the account, changed a new LTE sim, and flashed the HD voice options (you took care of that for me in your thread, thanks)
Still no LTE.
Will try some modems tonight.
A question no one can answer (virgin tech support, or their techs ) does the bell (virgin) lte frequency support this phone, on lte .
Thanks guys.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Tried a bunch of modems, and no LTE.
Grr..... Tech support knows nothing. They can't even say does bell/virgin currently have the 2600 lte frequency activated?

Just an update on this:
Heres what I figured out after A LOT of research!
Rogers/Fido LTE band is on 2600 mhz plus another band. LTE works stock on the i9305, in Ottawa, Toronto, and wherever there is coverage.
Bell/Virgin LTE band is 1700 and they are rolling out on a new frequency 2600. LTE works on this band (2600) with the i9305. I have to be with Virgin so that it works at the cottage.So if you are with Bell/Virgin LTE will work in Toronto(verified), (maybe Montreal). and not in Ottawa because they havn't rolled out that frequency yet.
I was in Montreal in Feb/March and LTE didn't work with Virgin at the time.

Request: Get VS980 with 24A to work on T-Mobile

I am trying to figure out the right combination of files to flash in order to get the vs980 to work on tmobile, pref with android 4.4.2 since both phones are now updated to that version of android if you can provide any instructions of help that would be really awesome. If you have your phone running on tmob would you mind also answering the few questions below?
are you using a Verizon or Tmobile: Rom, Modem, Recovery, Kernel? I want to experiment but dont want to hose my phone and want to know specifically what part is the key in getting this to work on tmob

Just put your Sim card in , it's an unlocked phone , set up T-Mobile APN to use T-Mobile internet. Switch to global mode for 4glte. I'm currently on T-Mobile stock 4.4.2
Sent from my VS980 4G using xda app-developers app

juanzr1 said:
Just put your Sim card in , it's an unlocked phone , set up T-Mobile APN to use T-Mobile internet. Switch to global mode for 4glte. I'm currently on T-Mobile stock 4.4.2
Sent from my VS980 4G using xda app-developers app
Click to expand...
Click to collapse
Just putting APN from the T-Mobile site didn't solve my LTE problems. Haven't been able to use the net at all with just putting the card in. I am in Global mode. Could someone post proper APN info for the T-Mobile service?

lg g2 vs980 on tmobile
ffdparker said:
Just putting APN from the T-Mobile site didn't solve my LTE problems. Haven't been able to use the net at all with just putting the card in. I am in Global mode. Could someone post proper APN info for the T-Mobile service?
Click to expand...
Click to collapse
I have vs980 and had a hard time getting T-Mobile to work properly on 24a.. Now I'm on newest omni ROM 4.4.4 and flashed 12b radio and get LTE,and 3g and edge..but it didn't work until I flashed 12b modem, which is really odd because It worked on straight talk with T-Mobile network, .

download rom cloudystock 2.2 from here
http://forum.xda-developers.com/showthread.php?t=2661866
then
settings>tethering and networks>mobile networks>network mode... select gsm/wcdma/lte auto
and in mobile networks>access point names... select T-Mobile US LTE
done
tmobile 4g lte on vs980

pete022682 said:
download rom cloudystock 2.2 from here
http://forum.xda-developers.com/showthread.php?t=2661866
then
settings>tethering and networks>mobile networks>network mode... select gsm/wcdma/lte auto
and in mobile networks>access point names... select T-Mobile US LTE
done
tmobile 4g lte on vs980
Click to expand...
Click to collapse
When installing did you install device variant vs980 or D801?

lankyboy29 said:
When installing did you install device variant vs980 or D801?
Click to expand...
Click to collapse
Never mind this worked...
Awesome VS980
android 4.4.2 Tmobile 4g working

lankyboy29 said:
Never mind this worked...
Awesome VS980
android 4.4.2 Tmobile 4g working
Click to expand...
Click to collapse
Nice glad your setup properly on 4g. Enjoy

I have the verizon lg g2 on stock 4.4.2 rom, the 24A update with a t-mobile sim inserted. The first thing the phone will do is automatically switch to global mode. You'll have to go into networking settings>mobile networks and add the t-mobile lte apn settings, fast.t-mobile.com:
Name: T-Mobile US LTE
APN: fast.t-mobile.com
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: <Not set>
MMS port: <Not set>
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: <Not set>
APN type: <Not set> OR Internet+MMS
APN protocol: IPv4/IPv6
APN roaming protocol: IPv4
Enable/disable APN: <greyed out unless there are multiple APN's>
Bearer: Unspecified
hit menu and then save. I currently am on stock rom, not rooted and getting 4g lte from the t-mobile sim in the suburbs of L.A., 15mbs-30mbs depending on where I am in the city.

fugazzi69 said:
I have the verizon lg g2 on stock 4.4.2 rom, the 24A update with a t-mobile sim inserted. The first thing the phone will do is automatically switch to global mode. You'll have to go into networking settings>mobile networks and add the t-mobile lte apn settings, fast.t-mobilom:
Name: T-Mobile US LTE
APN: fast.t-mobilom
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC:
MMS proxy: <Not set>
MMS port: <Not set>
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: <Not set>
APN type: <Not set> OR Internet+MMS
APN protocol: IPv4/IPv6
APN roaming protocol: IPv4
Enable/disable APN: <greyed out unless there are multiple APN's>
Bearer: Unspecified
hit menu and then save. I currently am on stock rom, not rooted and getting 4g lte from the t-mobile sim in the suburbs of L.A., 15mbs-30mbs depending on where I am in the city.
Click to expand...
Click to collapse
Hey fugazzi, I tried the new APN and changed global and it still says 3g/HSPA+. Is there anything else I need to do? I also get the sim card ? mark icon in the notification.
Hey lankyboy, what option did you end up selecting for cloudstock install?
Thanks.

tacoj0e said:
Hey fugazzi, I tried the new APN and changed global and it still says 3g/HSPA+. Is there anything else I need to do? I also get the sim card ? mark icon in the notification.
Thanks.
Click to expand...
Click to collapse
on your network type, is it now showing T-Mobile? under mobile networks>network type and strength, you can do an automatic network search and then choose t-mobile when it appears. also, check and see if your area has 4g/lte support, the verizon lg g2 only has the 2100 lte band in common with t-mobile and not the 1700 band.

fugazzi69 said:
on your network type, is it now showing T-Mobile? under mobile networks>network type and strength, you can do an automatic network search and then choose t-mobile when it appears. also, check and see if your area has 4g/lte support, the verizon lg g2 only has the 2100 lte band in common with t-mobile and not the 1700 band.
Click to expand...
Click to collapse
It says t-mobile in the lock screen but under network type and strength it just says 3g-75dBm. Also, in this screen I can't select anything or go to any menu. I'm in Oakland, CA so I assumed I have lte. I read an article saying my city is refarmed 1900 to HSPA+. I guess that's supposed to be 4g and not lte?
How'd you get that ? mark icon in the notification to go away?
Thanks.

tacoj0e said:
It says t-mobile in the lock screen but under network type and strength it just says 3g-75dBm. Also, in this screen I can't select anything or go to any menu. I'm in Oakland, CA so I assumed I have lte. I read an article saying my city is refarmed 1900 to HSPA+. I guess that's supposed to be 4g and not lte?
How'd you get that ? mark icon in the notification to go away?
Thanks.
Click to expand...
Click to collapse
as far as I know, the 1700/2100 bands are the lte's, it looks like your area is H+ at best running the 1900 band. I could be wrong, but double check with T-mobile to make sure.
here's the info from t-mobile, http://support.t-mobile.com/docs/DOC-4988
which ? mark do you mean?

bringing a dead thread back to life because I'm happy. I live in Tipp City, Ohio, by no means a big city like LA and I am getting everything. LTE, H+, 3G, call and text. Paranoid Android 4.4.4 beta 5. Works like a charm.

Hey guys so I am on tmobile on the vs980 and I would like to flash a custom Rom but I had to downgrade the phone with LG flash tools to get data to work on the phone. I am fairly knowledgeable when it comes to flashing roms and such but when I use the autorec app and flash twrp and then flash a Rom like say cm11 or color is 4.2.2 it will eaithier bootloop or show the LG symbol and then go to a black screen any help would be great thanks
Sent from my VS980 4G using XDA Free mobile app