Hello,
I did a factory (provider endorsed) update to 2.3.4 v20i and I cannot seem to root the phone. I have read the noob article for optimus black and tried:
- gingerbreak
- unlockroot
- superoneclick
So basically, with the exploits being closed off in the recent versions, there is no simple way to root this version?
Regards,
Len
If you want to keep your current v20i then there is no already made root method but you can inject cwm using dd on linux . But if you just want to install a custom rom , here is a root method http://forum.xda-developers.com/showthread.php?t=1480392
. And search before you post
Sent from my LG-P970 using xda premium
zyfkurmom said:
If you want to keep your current v20i then there is no already made root method but you can inject cwm using dd on linux . But if you just want to install a custom rom , here is a root method http://forum.xda-developers.com/showthread.php?t=1480392
. And search before you post
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
Like the OP, I did the official LG update to 2.3.4 (v20i) and tried to use the method in the above link to root it and install a custom ROM. It didn't work because the Smartflash tool started the process and then stopped, saying 'Timeout error'. I searched the forums for a solution but no one else seemed to have the problem. I wasn't clear on why this was...maybe because they all rooted while on Froyo, or on a different V20 version.
Any help would be appreciated.
OK, I will reply to my own post as I ended up solving the problem
First, I am using a LG P970g on Canadian carrier Telus. It is known as the Optimus Black Skype Edition.
First, I downgraded my stock 2.3.4 ROM to a Froyo build (V10A EEU XXX) using SmartFlashTool. The ROM is in the link below:
http://forum.xda-developers.com/showthread.php?t=1448803
The previous .bin and .fls files I used were from a more recent ROM (March 2012) while the one in the above link is May 2011. Using this older one allowed me to downgrade using SFT without problems.
I then rooted using Gingerbreak, and used ROM Manager app from the app store to install CWM. Rebooted into CWM and installed the custom ROM I wanted from my SD Card.
Took me a long time to figure this out, but I did it. Very pleased.
Check my noob how to, there is a way, of how to root EVERY ROM in the 3rd post.
N00BY0815 said:
Check my noob how to, there is a way, of how to root EVERY ROM in the 3rd post.
Click to expand...
Click to collapse
I have a question about that post. It seem to require that the firmware in the phone be dumped out in kdz format (which LG Extract is mentioned to work on). There was some mention in some posts that that could be done using LG-Utils. The only LG Utils I can find is LG-Utils-0.4.2.zip but it seems to be for KP500 (KP500-Utils-EN.exe) and KS360 (KS360-Utils-EN.exe). Is this the right LG Utils? If so which exe is to be used and what command and parameters needs to be entered to get the kdz file to be used with procedure you mentioned?
Thanks,
Len
Read the guide, there is even a link to that utility and you simply need to download your firmware in kdz format, from lg or any other server
Sent from my LG-P970 using XDA
N00BY0815 said:
Read the guide, there is even a link to that utility and you simply need to download your firmware in kdz format, from lg or any other server
Sent from my LG-P970 using XDA
Click to expand...
Click to collapse
Yes, I read that post and the guide and that entire thread. The reason that I found your suggested method attractive was because you mentioned:
"To flash and actually root the SW, you need to follow THIS guide, from Step 2 on, and it will be perfectly rooted and you can be sure, that noone patched anything else in your software, cause you made it on your own."
The post and thread suggests to download the kdz file from lg-phone-firmware.com where the domain is registered to some guy named Vitiello Luigi
in France. I guess the stuff from this site is safe but it is less reassuring than getting it directly off my phone.
Len
I downloaded the kdz file for my firmware from lg-phone-firmware.com and was able to go through the process of getting a rooted version on the phone fine. The only brief head scratching moment was with the clock work mod reboot recovery menu system where when you invoke the commands which require confirmation (like installing superuser.zip) where the confirmation options show a bunch of 'No's and you have to scroll down to get to the one entry that says 'Yes'.
Len
No one's replying to my thread anymore and a post was deleted last week for some reason.. Anyway, I got my phone rooted too, same method, but had no network access, 3g or phone service, did you overcome that at all?
aniym said:
OK, I will reply to my own post as I ended up solving the problem
First, I am using a LG P970g on Canadian carrier Telus. It is known as the Optimus Black Skype Edition.
First, I downgraded my stock 2.3.4 ROM to a Froyo build (V10A EEU XXX) using SmartFlashTool. The ROM is in the link below:
http://forum.xda-developers.com/showthread.php?t=1448803
The previous .bin and .fls files I used were from a more recent ROM (March 2012) while the one in the above link is May 2011. Using this older one allowed me to downgrade using SFT without problems.
I then rooted using Gingerbreak, and used ROM Manager app from the app store to install CWM. Rebooted into CWM and installed the custom ROM I wanted from my SD Card.
Took me a long time to figure this out, but I did it. Very pleased.
Click to expand...
Click to collapse
OptimusCrack said:
No one's replying to my thread anymore and a post was deleted last week for some reason.. Anyway, I got my phone rooted too, same method, but had no network access, 3g or phone service, did you overcome that at all?
Click to expand...
Click to collapse
well I'm about to try rooting with some method or other. I too have the 20i telus ROM. I'm a tad perplexed. I've rooted many devices and for this one it seems rather convoluted. ...a bit daunting to say the least. In any event will try the suggested method in this thread and will report with results. This device is for the moment my main daiLy so if I lose network I'll be back to an old flip phone, and you don't need me to say how awful that would be... LOL
zyfkurmom said:
If you want to keep your current v20i then there is no already made root method but you can inject cwm using dd on linux . But if you just want to install a custom rom , here is a root method http://forum.xda-developers.com/showthread.php?t=1480392
. And search before you post
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
I'm sorry, I don't understand. That is now a 21 page thread about a questionable method...?
Still looking for how to root my v20i. I'm very grateful to anyone that can point me to a straightforward solution. LOL.
igor45 said:
I'm sorry, I don't understand. That is now a 21 page thread about a questionable method...?
Still looking for how to root my v20i. I'm very grateful to anyone that can point me to a straightforward solution. LOL.
Click to expand...
Click to collapse
use SMART FLASH TOOL..
http://forum.xda-developers.com/showthread.php?t=1448803
follow the instructions
Sent from my LG-P970 using xda app-developers app
SamBG said:
use SMART FLASH TOOL..
http://forum.xda-developers.com/showthread.php?t=1448803
follow the instructions
Click to expand...
Click to collapse
Thanks!. I used SFT on another LG, was easy as pie.
So, SFT will flash whatever you feed it to the device and wipe it (it's a nandroid)? BUT can flash ROMs only if they are in proper bin/fls format?
If so that makes sense. Little confused by all the options/non-options for rooting v20i/2.3.4, and I don't care to keep what version I have to get root. I just want to be able to use custom ROMs on my black.
Sorry for all the questions - I don't fully understand the LG roms/system yet.
igor45 said:
Thanks!. I used SFT on another LG, was easy as pie.
So, SFT will flash whatever you feed it to the device and wipe it (it's a nandroid)? BUT can flash ROMs only if they are in proper bin/fls format?
If so that makes sense. Little confused by all the options/non-options for rooting v20i/2.3.4, and I don't care to keep what version I have to get root. I just want to be able to use custom ROMs on my black.
Sorry for all the questions - I don't fully understand the LG roms/system yet.
Click to expand...
Click to collapse
ya u need a proper bin/fls file...flash any patched stock lg rom..then u ll b able to go in cwm recovery and flash any zip files..
Sent from my LG-P970 using xda app-developers app
Related
I cannot seem to find the answer that I am looking for for my issue, maybe i missed it.
I tried for ages to get to the root plus cwm to work and i could not make it happen for my phone, is there a way to put on the cwm option POST root?
I was able to get the phone rooted but had to go about it a separate way and i would like to put some custom rom action on this miserably boring phone.
Thanks
I rooted my phone first then used mobile Odin pro to flash the cf kernel which means I now have cwm and recovery.
ReportMeCrybaby said:
I cannot seem to find the answer that I am looking for for my issue, maybe i missed it.
I tried for ages to get to the root plus cwm to work and i could not make it happen for my phone, is there a way to put on the cwm option POST root?
I was able to get the phone rooted but had to go about it a separate way and i would like to put some custom rom action on this miserably boring phone.
Thanks
Click to expand...
Click to collapse
yes.
can you post screenshot of setting-about phone
OR mention what you can see there for this field
Baseband
Kernel
Build versuion.
About phone
dr.ketan said:
yes.
can you post screenshot of setting-about phone
OR mention what you can see there for this field
Baseband
Kernel
Build versuion.
Click to expand...
Click to collapse
Sorry, still new to Android and have been in Apple land for a while so my brain went on vacation for a bit.
Baseband is XXKK5
Kernal is KKA
Gingerbread
Thanks in advance, i cant wait to have something beyond this stock nightmare
Ok
Download guide from last link on my signature.
Select i have rootable rom
Select i have kka kenel
Now download according file, n follow instruction, you have to exexute i already rooted
Sent from my GT-N7000 using xda premium
dr.ketan said:
Ok
Download guide from last link on my signature.
Select i have rootable rom
Select i have kka kenel
Now download according file, n follow instruction, you have to exexute i already rooted
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
When i click on and open the file "dr ketan guide" I get a list of kernal versions (to confirm i am on the right page correct) then scroll down to 1) i have a direct rootable or 2) i do not, I click on 1 and it reads file not found when i proceed to open the file. I get the same when i click 2 as well.
download guide, extract n keep file n folder structure as it is, if u have change
Sent from my GT-N7000 using xda premium
dr.ketan said:
download guide, extract n keep file n folder structure as it is, if u have change
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Still getting File Not Found when i extract and open the Dr K guide.
Does that page say Ultimate Rooting Guide for GNote at the top then have the kernal versions listed then the options I can direct or cannot direct root at the bottom of the page with links?
They are still not opening if this is the correct location, can you just send me a direct link to the site?
Thanks loads
i recently bought a p970g from koodo android 2.3.4 with v20j firmware ..im a total newb at this and searched to no avail on how to get it rooted.... superone click hangs at root 7 stage ..unlock root can't find shell root .....lg drivers are installed sucessfully... tried cw method but that tutorial isnt for newbs and not too detailed ..can someone simplify it for me..or in other words spell it out and direct links to the exact downloads i need ..much appreciated thanks
Hi jaynjolie
Enter here search the download page and download UPK 3.7
inside that zip file you will find BlackJack then follow the instruccions to root your phone, it's really easy
Afaik blackjack doesn't work on GB firmware
FDN
do it work or not please? can someone verify this phone and be rooted and still work with koodo Canada provider? thank you
fw version doesn't matter, and blackjack won't work. you have to flash binary files with smartflash. later, you can easily update your apn config file with this. but before all, be sure that you've tried all known methodds correctly (superoneclick, unlockroot, esteem...)
Ilko said:
fw version doesn't matter, and blackjack won't work. you have to flash binary files with smartflash. later, you can easily update your apn config file
what would the best firmware to use on that model phone in canada ..and is that firmware root ready or already rooted? how difficult is it to flash into my phone ..also will i be able to save my original flash in case i need it? ..will i be able to reinstall it in case of brick or non working apn...i really want root so i can get rid of factory preinstalled junk ..my phone is constanstly running on low ram cause of apps i'll never use.....i have upk 3.7 with smartflash ...and link to a rom or bin would be awesum thanks
Click to expand...
Click to collapse
Apn for koodo
Apn = sp.koodo.com
Proxy = 74.49.0.18
Port = 80
I have the koodo fw in bin/fls format with cwm already injected so you'd just have to use smartflash to get it on your phone, then reboot into recovery and flash superuser to gain root access. Let me know or try the cwm inject method yourself. You can get the koodo branded fw at http://lg-phone-firmware.com/index.php?id_mod=1
Sent from my LG-P970g using XDA
jdayscokn said:
Apn for koodo
Apn = sp.koodo.com
Proxy = 74.49.0.18
Port = 80
I have the koodo fw in bin/fls format with cwm already injected so you'd just have to use smartflash to get it on your phone, then reboot into recovery and flash superuser to gain root access. Let me know or try the cwm inject method yourself. You can get the koodo branded fw at
Sent from my LG-P970g using XDA
Click to expand...
Click to collapse
sure would love to have that firmware ..would you provide the link or you can pm me if you don't prefer to upload it ? and do i need to enter the apn myself or is it not needed on your firmware? thanks
smartflash will erase everything, so backup all saveable things. CWM will let you to do backups after having flashed. A specific branded fw is not necessary, unless if it's your aim. this way you'll avoid additional apps included by the operator, but they're also downloadable on store maybe ?
erasing eveverything isnt a big deal ..my phone is a week old and only a few contacts to add ...im not concerned about that... i just want to install the best firmware compatable with my device with the cwm already added so i can flash it with smartflash ..so it is easier for me ...im very new to phone modification ..but im not bad with computers...what FW is recommended .....thanks for your responses
lean7 said:
Hi jaynjolie
Enter here search the download page and download UPK 3.7
Click to expand...
Click to collapse
note : it contains pdf guides. But I advice you to read the thread to inform yourself at least. you'll get some basics.
Ilko said:
note : it contains pdf guides. But I advice you to read the thread to inform yourself at least. you'll get some basics.
Click to expand...
Click to collapse
i see the v20o patched says deu ..will that still work with a canadIAN PROVIDER and its injected with touch my phone is p970g
?thanks for your help
no problem, it's only the default language of the fw. it should detect your network's language and switch automatically at first boot when the wizard is launched. if not, just change it in settings.
Ilko said:
no problem, it's only the default language of the fw. it should detect your network's language and switch automatically at first boot when the wizard is launched. if not, just change it in settings.
Click to expand...
Click to collapse
thanks a million will give it a whirl tommorrow after work ....hopin and praying ...much appreciated .
also, take a look at general section. there is a lot of infos about few things, tuts etc... good luck
successfully upgraded to v20o ..prone works no prob ...cant get into recovery mode with V- when powering up ...please info on what to do thanks
Download terminal emulater from market and type reboot recovery
Or download Rom manager and select reboot recovery in app
Sent from my LG-P970g using XDA
All's great love my new phone. Thanks everyone for their help for my rooted phone
since rooting with v20o signal strength seems lower
seems that after sucessfull root and reflash from v20j to v20o..the signal strength is always goin from 1 bar to 4 and sometimes unable to get signal any suggestions? or is this a isolated case thanks
I had the same issue with my telus p970. When i reflash stock telus fw I have perfect signal no idea why and no one seems to have an answer
Sent from my LG-P970g using XDA
Hello, i (think) i want to root my Lg Optimus Black,
but before making all kinds of decisions i have a few questions;
Will rooting my phone remove the warranty? because i can not afford it to drop my phone, and have to pay the full 200 euro's for it..
if it does remove my warranty, can i switch back, and remove everything so LG will still repair my phone?
I once upgraded my 2.2 froyo to 2.3 gingerbread with the LG site,
is it posible to upgrade my phone to the 'normal' android version? because i hate
the LG Interface.. and if i can, will this also remove my warranty?
If i am going to root, i will be using several forum posts found on XDA.
if i follow these steps: http://forum.xda-developers.com/showpost.php?p=23790405&postcount=171
and then these: http://forum.xda-developers.com/showthread.php?t=1473592
will i have a stable LG optimus black, with another interface.
If rooting, or installing the default Android 2.3 is not safe to use, is there any way to Remove the horrible LG interface (The lockscreen, dialscreen, statusbar, Music app, etc. ?
if you modify the software you will loose your waranty. And you can ALWAYS go back to stock in one way or another.
Skickat från min LG-P970 via Tapatalk 2
1.- You can always unroot to SmartFlash and get back your warranty..
2.- if you have much problems with rooting, back to 2.2 and root, then install the Roms that you prefer!!, is more easy than injecting Recovery!!
Inferbubu said:
1.- You can always unroot to SmartFlash and get back your warranty..
2.- if you have much problems with rooting, back to 2.2 and root, then install the Roms that you prefer!!, is more easy than injecting Recovery!!
Click to expand...
Click to collapse
Unrooting to smartflash, is that like undo the rooting to.. what is smartflash?
And are the links i send in, the rightway to root a LG Optimus black with 2.3 gingerbread and version V20o ?
http://forum.xda-developers.com/showthread.php?t=1487105
Skickat från min LG-P970 via Tapatalk 2
Hello, i want to root my Optimus black.
in the system specs, it says V20o.
So i went to click on the V20o link, there i got a few steps.
at the first step you need to download a file, not only it says v20b in there, it is also from a v20B thread. so is this the right file? and the download link doesnt work...
For 20o follow this link:
http://forum.xda-developers.com/showpost.php?p=23788913&postcount=170
Download of 20o root is possible if you remove the html in the browser.
I did al the steps, but exedently clicked Clockwork mod away, so now i havent done steps 14,15 and 16! Can someone please tell me what to do! how can i get my recoberyscreen back?
Simply start with step 5 again and follow the instruction!
Done that a few times myself.
matt1966 said:
Simply start with step 5 again and follow the instruction!
Done that a few times myself.
Click to expand...
Click to collapse
He only needs quickboot or rom manager, or adb and the command: reboot recovery, then flash superuser, reboot, be happy no need to reflash...
Sent from my LG-P970 using XDA
N00BY0815 said:
He only needs quickboot or rom manager, or adb and the command: reboot recovery, then flash superuser, reboot, be happy no need to reflash...
Sent from my LG-P970 using XDA
Click to expand...
Click to collapse
Hello! I need some help, I've been searching for a couple days about how to root my lg optimus black p970 V20a. I found your noob threat and I see the link for V20a but when I click there it sends me to a link with Root (Superuser) on firmware V20B (CIS). Does this means V20b can be use for V20a's? or is it a typo and if it easy can you please where to find the V20a.
Much appreciate!! Thanks!!
You can root it on your own (check the 3rd post of my noob how to) or ask someone, to provide it to you... I dont have time, but the how to should be self explaining You only need the LgExtract tool (posted at the end of the thread) Smartflash + Windows enabler and Superuser.zip And your pretty much done Or keep on searching for Root v20a Optimus Black
N00BY0815 said:
You can root it on your own (check the 3rd post of my noob how to) or ask someone, to provide it to you... I dont have time, but the how to should be self explaining You only need the LgExtract tool (posted at the end of the thread) Smartflash + Windows enabler and Superuser.zip And your pretty much done Or keep on searching for Root v20a Optimus Black
Click to expand...
Click to collapse
OK I will try... Wish me luck
Sent from my LG-P990 using xda premium
how root my lg optimus black
i am using android version 2.3.4, Kernel version 2.6.35, Builder number GRJ22,
Software version LG P970 V20e...........i have tried so many times to root my phone .....i cant get..it....so please tell me how can i root my LG Optimus Black (P970) ...which files i need to root ....pls help me........my email id is [email protected] you.....!!!!!!!!:crying:
How about reading? Did you read my noob how to already? There is no application, that can do the root, till now. Download the ROM in kzd format (See my noob how to on page 3), extract bin and fls files, inject CWM, flash via Smartflash, install superuser.zip when phone is in CWM/recovery, (you should also make a factory reset), reboot, be happy Seriously guys, start doing research, what for do I write those NOOB HOW TO's then, if noone really reads them?
Hi guys
I recently brought a 2nd hand LG black.
This rom is totally stock, to be precise, it is a Hong Kong version v20
Since I want to improve the battery life and have a more defined rom.
I would like to root and install CWM for my LG black.
Up to now, I have downloaded a few kdz from the subforum.
I have little experience before with LG phone, Last one i played around was LG P500. I remember last time i could easily root the phone by super1click, and then install rom manager from play store.
And from there (play store) i install CWM recovery.
I would like to find the confirmation from you guys that
Can i go for the same path again, super1click>rom manager>CWM recovery??
Thx in advance!!
Read my how to and find all you neeed
Sent from my LG-P970 using xda app-developers app
thx
I realised the way you suggest to install CWM as exactly as mine.
But you only suggest to use SOC to root for 2.2 devices
Is there any reasons I should not root a 2.3 by SOC?
Actually SOC is always the most comfortable way to root for me
Hope you can share some
j4371 said:
thx
I realised the way you suggest to install CWM as exactly as mine.
But you only suggest to use SOC to root for 2.2 devices
Is there any reasons I should not root a 2.3 by SOC?
Actually SOC is always the most comfortable way to root for me
Hope you can share some
Click to expand...
Click to collapse
You can try it All you ll see is, that it doesnt work. If you look for root v20x or read my thread as a whole you ll find all answers you need. If you download the same version you have, extract bin and fls files flash and simply dont wipe data, just cache and dalwik have fun man
Sent from my LG-P970 using xda app-developers app
sorry to bother you again
But the link from your guide for the patched v20b.bin seems not working anymore
could you please tell me where i can find them
thx
try to use unlockroot
j4371 said:
sorry to bother you again
But the link from your guide for the patched v20b.bin seems not working anymore
could you please tell me where i can find them
thx
Click to expand...
Click to collapse
u can try unlockroot(search google). i managed it with single click.i dont know whether it will work for u or not.
j4371 said:
sorry to bother you again
But the link from your guide for the patched v20b.bin seems not working anymore
could you please tell me where i can find them
thx
Click to expand...
Click to collapse
Read post 3 about how to do it yourself and follow the youtube video guide mentioned there. It's really easy and safe.
To me:
Easiest
- Smartflashtool flash v10a
- Use mass storage for phone
- Download Gingerbreak.apk
- Transfer to phone mass storage
- Install app
- Root
- Open Play Store
- Download ROM Manager
-Flash CWM
Voila
Easiest but slowest
Sent from my LG-P970 using Tapatalk 2
SoulExertz said:
To me:
Easiest
- Smartflashtool flash v10a
- Use mass storage for phone
- Download Gingerbreak.apk
- Transfer to phone mass storage
- Install app
- Root
- Open Play Store
- Download ROM Manager
-Flash CWM
Voila
Easiest but slowest
Sent from my LG-P970 using Tapatalk 2
Click to expand...
Click to collapse
Hmm, complicated. Why not:
- Smartflashtool flash v20n that has CWM inside. This is the procedure.http://forum.xda-developers.com/showpost.php?p=23788913&postcount=170.You only need the V20n,0,s (any of them) in fls/bin format.
- Flash Superuser.zip in CWM
- Done.
thx everyone
finally i got it!!
now using zeus v7, very cool rom!
But one last question, can i use the same smartflash with patched .bin method to revery to stock if i mess up something.
for example i am on cm9 and i wanna go back to GB, or i have to repartition my phone just like other brands like samsung.
j4371 said:
thx everyone
finally i got it!!
now using zeus v7, very cool rom!
But one last question, can i use the same smartflash with patched .bin method to revery to stock if i mess up something.
for example i am on cm9 and i wanna go back to GB, or i have to repartition my phone just like other brands like samsung.
Click to expand...
Click to collapse
Yes, you can. It is also useful for warranty (as root is voiding your warranty).
danfizesan said:
Yes, you can. It is also useful for warranty (as root is voiding your warranty).
Click to expand...
Click to collapse
Yo have to use an unpatched bin and fls then, but for the rest, yes you can
Sent from my think of something creative here.
ok thx
i feel safe now~~
Hi everyone!
First of all, sorry if this as been asked, tonight my Google skills didn't help me find an answer.
A friend of mine owns a LG Optimus 2X (P990) bought from Fido in Canada. Currently she's on Gingerbread and would like to update to ICS (which is the latest stock rom available from what I read)
She wouldn't get the software update OTA so she tried downloading the LG Updater software from LG directly. The software detects the phone and says an update is available.
At some point, a popup appear suggesting to make a backup. So far, everything is fine. Once the backup is done and she click the "Start upgrade" button, she gets this error message : "An Unsupported operation has been attempted"
Anyone ever seen this before? Is there a way to upgrade her phone without using the LG software?
Since it's not my own phone, I would prefer not rooting it.
If rooting is really the only solution? What would be a good guide to read to do the update? (I did read a few sticky posts... 1 is the all in one tool kit... it explains each feature, but is not really a guide and I still have some questions unanswered after reading it. The other guide I read, the download links are broken)
Thank you
BigBlarg said:
Hi everyone!
First of all, sorry if this as been asked, tonight my Google skills didn't help me find an answer.
A friend of mine owns a LG Optimus 2X (P990) bought from Fido in Canada. Currently she's on Gingerbread and would like to update to ICS (which is the latest stock rom available from what I read)
She wouldn't get the software update OTA so she tried downloading the LG Updater software from LG directly. The software detects the phone and says an update is available.
At some point, a popup appear suggesting to make a backup. So far, everything is fine. Once the backup is done and she click the "Start upgrade" button, she gets this error message : "An Unsupported operation has been attempted"
Anyone ever seen this before? Is there a way to upgrade her phone without using the LG software?
Since it's not my own phone, I would prefer not rooting it.
If rooting is really the only solution? What would be a good guide to read to do the update? (I did read a few sticky posts... 1 is the all in one tool kit... it explains each feature, but is not really a guide and I still have some questions unanswered after reading it. The other guide I read, the download links are broken)
Thank you
Click to expand...
Click to collapse
i want ICS too on my phone, and use LG tool several times but unsuccessfully, it is like that not working or i dont know...
you can use AIO tool, it is too easy to work with it, just follow instruction and install correct bootloader and thats it.
sejo789 said:
i want ICS too on my phone, and use LG tool several times but unsuccessfully, it is like that not working or i dont know...
you can use AIO tool, it is too easy to work with it, just follow instruction and install correct bootloader and thats it.
Click to expand...
Click to collapse
What would be the right steps?
Use option #4 to repartition the device for ICS and then option #7 to flash the ICS stock rom?
here, in this link is explaination how to root and install ROM:
http://forum.xda-developers.com/showpost.php?p=43869967&postcount=667
i work what it say in that post, and succes
sejo789 said:
here, in this link is explaination how to root and install ROM:
http://forum.xda-developers.com/showpost.php?p=43869967&postcount=667
i work what it say in that post, and succes
Click to expand...
Click to collapse
Thank you, I'll give it a try tonight
Alright, that didn't help at all.
First of all, I wanted to flash a stock ROM... the guide tells us to install CWM and we got stuck at the part where we have to flash the ROM because it would seem CWM won't take the KDZ (or bin/fls) files.
Now we can go to the SW Upgrade mode without the battery, but the smartflash utility time out after 3 minutes and end on an error.
We can also go to CWM with the battery... but with no apparent way to flash a stock rom.
We're stuck at the moment.
Edit : So in the end we flashed only the BIN file instead of both BIN and FLS. No more errors and the phone rebooted correctly under ICS! Yay!
BigBlarg said:
Edit : So in the end we flashed only the BIN file instead of both BIN and FLS. No more errors and the phone rebooted correctly under ICS! Yay!
Click to expand...
Click to collapse
so, problem is solved? or still have some problmes?
sejo789 said:
so, problem is solved? or still have some problmes?
Click to expand...
Click to collapse
It's fixed! We didn't flash the FLS file (which would be the baseband?) but the phone still booted properly and connected properly to the cell phone provider.