My phone have a big problem in PrimeHD8.0 now!! - XPERIA X8 Q&A, Help & Troubleshooting

I flashed it yesterday in stock kernel.
But today I have a big problem.
My USB can't work.
I can't use flashtool now,and can't enter Recovery....
who can help me!!!!
Sorry my English isn't good..

check USB cable??? is it working fine??

check USB cable??? is it working fine??
Click to expand...
Click to collapse
Jus85018 can't enter to xRecovery, and your question is check USB cable ? -,-
Try to connect your phone in Flashing mode ? Use FlashTool to flash stock rom.
Sorry for my english, but i am from poland

noobismyname said:
check USB cable??? is it working fine??
Click to expand...
Click to collapse
KrzyCzaj|^^| said:
Jus85018 can't enter to xRecovery, and your question is check USB cable ? -,-
Try to connect your phone in Flashing mode ? Use FlashTool to flash stock rom.
Sorry for my english, but i am from poland
Click to expand...
Click to collapse
No offence, but i dont think both of you properly understood the question. As stated by the OP
My USB can't work.
Click to expand...
Click to collapse
AND
I can't use flashtool now,and can't enter Recovery....
Click to expand...
Click to collapse
Both of you asked him to do things that he cant do because you didn't read the question properly!
KrzyCzaj|^^| said:
can't enter to xRecovery
Click to expand...
Click to collapse
Who said it was Xrecovery?

Relax
No need to press the back key to the XR, only when the restart has been touch-screen
If useful to you then press the THANKS button

Restart the phone.
Tap the screen when the Sony Ericsson logo appears.
Enter xRecovery and Mount USB Storage. Check if it works, if it doesn't, buy a new cable.

HAKA said:
Restart the phone.
Tap the screen when the Sony Ericsson logo appears.
Enter xRecovery and Mount USB Storage. Check if it works, if it doesn't, buy a new cable.
Click to expand...
Click to collapse
Thanks
I can Enter Recovery now
Originally, I press the return key...

Related

Flashtool: device not recognized

Hi, I'm tryin to instal nAa GB kernel, but flashtool doesn't recognize my phone... If I plug the USB it says "device connected with USB debugging off", but it doesn't say the model and in fact when I try to flash it doesn't work. I've installed gordon gates and all the drivers, but it still doesn't work. Any ideas?
what exactly did you do? write all the steps
Ok I think it works now, I needed to switch to MSC mode Thanks anyway
well, the phone needs to be turned off
+ drivers installed,lpl
Sent from my E15i using xda premium
+ holding back button while connecting USB
Is it important how did i send this?
Tommolo said:
Hi, I'm tryin to instal nAa GB kernel, but flashtool doesn't recognize my phone... If I plug the USB it says "device connected with USB debugging off", but it doesn't say the model and in fact when I try to flash it doesn't work. I've installed gordon gates and all the drivers, but it still doesn't work. Any ideas?
Click to expand...
Click to collapse
intall latest drivers and hold back button then connect to the computer....................
if still don't recognize, go to device manager and check there,
I think you don't:laugh: turn on debugging
yeah!
you forget to turn on your debugging!
mark :
allow non market apps
android debugging
install all drivers
x8driver
flashtool\driver
gordons gates
Help.
here is my problem i got the flashtool because i want to downgrade my xperia pro and it connects it detects my device but once i put it into the fastboot to flash it back to its original state it just shows the little pop up that says to connect it to fastboot mode and i do it on the phone the little blue light turns on and stuff but it doesn't recognize it on the flashtool the usb debugging is on and the unknown sources is on as well i want to downgrade the phone because since i upgraded it doesn't let me watch movies on my phone from the internet and i want to root it to if anyone can help it will be much appreciated. thanks :crying:
run ggsetup.exe in flashtool/drivers
then do flashing:laugh:
Awesome!
nag xperia said:
run ggsetup.exe in flashtool/drivers
then do flashing:laugh:
Click to expand...
Click to collapse
Doing this now. Makes Sense! Thank you
phnxme7 said:
Doing this now. Makes Sense! Thank you
Click to expand...
Click to collapse
hi can you please help me flashtool the latest version now can not flash the firmware 2.1.ftf why
ariadelvana said:
hi can you please help me flashtool the latest version now can not flash the firmware 2.1.ftf why
Click to expand...
Click to collapse
make sure if your flash tool not corrupt, disable firewall or antivirus..
install all driver and check your phone
Milandas01 said:
Hello friend, please pay your attention. I'm try to root my canvas hd using sp flash tool. Everything is alright but when I connect my device it's only shows searching. Not detect i also install or uninstall x86 driver hundred times. But problem is same. what is the problem i can't understand :'(
Please please please help
Thank in advance :'(
Click to expand...
Click to collapse
Wrong forum
pooped from my rooted a$$

[Q] zeus mode ?!?!?!?

hi guys,
today i have bricked my z...i was only formatting the sd card and then it reboot and then it died...i tried everything but it won't turn on...the strange thing is when i plug it to my pc, it knows it as ZEUS FLASH DEVICE
there are no led blinking and i tried with hard reset but nothing...i had nameless rom 4.4.2 with unlocked bootloder
what i should do?
UPDATE: if i press power+volume + it reboots in the same mode but it doesn't vibrate or turn on leds
up
flash with flashtool if not solved problem is hw .
lauri_ylonen said:
flash with flashtool if not solved problem is hw .
Click to expand...
Click to collapse
Flashtool in this case is useless and i don t think is hardware...when i plug it in the pc (usb) it recognize it as zeus flash device but you can t do anything...no recovery no flashboot no flashmode...anyway i have sent it in assistance and i m not sure they will repair it
ex19961996 said:
Flashtool in this case is useless and i don t think is hardware...when i plug it in the pc (usb) it recognize it as zeus flash device but you can t do anything...no recovery no flashboot no flashmode...anyway i have sent it in assistance and i m not sure they will repair it
Click to expand...
Click to collapse
please check this method
http://forum.xda-developers.com/showthread.php?t=2646405
lauri_ylonen said:
please check this method
http://forum.xda-developers.com/showthread.php?t=2646405
Click to expand...
Click to collapse
thank you but this method isn't compatible with z yet...there isn't "test point" and package...i have to do all this on my own?

Need Help.

My sony xperia z will not power on anymore. If i connect it to a charger, it shows the sony logo and keeps restarting. When i connect it to my computer not much happens. SUS can detect it and i tried updating it, it downloads and installs and tells me to restart my phone but still nothing happens and the same thing as before happens when i connect it with a charger.Sony PC Companion app does not detect the phone.
So i tried flashing with xperia flasher and i downloaded a 4.3 stock rom, flashed it but then at the end it says usb debugging mode must be enabled but i do not think its enabled, nor can i check since my phone does not power on.
Please Help!!!
HPTL7 said:
My sony xperia z will not power on anymore. If i connect it to a charger, it shows the sony logo and keeps restarting. When i connect it to my computer not much happens. SUS can detect it and i tried updating it, it downloads and installs and tells me to restart my phone but still nothing happens and the same thing as before happens when i connect it with a charger.
So i tried flashing with xperia flasher and i downloaded a 4.3 stock rom, flashed it but then at the end it says usb debugging mode must be enabled but i do not think its enabled, nor can i check since my phone does not power on.
Please Help!!!
Click to expand...
Click to collapse
Hi, was it a stock rom on it before this issue occured?
gaza1994 said:
Hi, was it a stock rom on it before this issue occured?
Click to expand...
Click to collapse
Yes. Stock rom and also never been rooted.
bump
HPTL7 said:
Yes. Stock rom and also never been rooted.
Click to expand...
Click to collapse
Did you try to hard reset it? Try to press power and vol up.
What to you mean with xperia flasher? Download a .ftf file and use flashtool
St.Jimmy90 said:
Did you try to hard reset it? Try to press power and vol up.
What to you mean with xperia flasher? Download a .ftf file and use flashtool
Click to expand...
Click to collapse
sorry meant FlashTool. i did flash and it completed it successfully but when i tried powering on, nothing happend. so i connected to charger and the sony logo loop restart happen again. it said at the end of flashing that usb debugging must be enabled so i think that may be the problem why it did not work.
I have tried hard reset. It vibrates once, pauses and then vibrates 3 times and then nothing.
HPTL7 said:
sorry meant FlashTool. i did flash and it completed it successfully but when i tried powering on, nothing happend. so i connected to charger and the sony logo loop restart happen again. it said at the end of flashing that usb debugging must be enabled so i think that may be the problem why it did not work.
I have tried hard reset. It vibrates once, pauses and then vibrates 3 times and then nothing.
Click to expand...
Click to collapse
What if you open pcc, select repair phone and follow the steps on screen? (your phone has to be powered off)
St.Jimmy90 said:
What if you open pcc, select repair phone and follow the steps on screen? (your phone has to be powered off)
Click to expand...
Click to collapse
Thanks for the reply but as stated earlier in my first post, i said that pc companion does not detect my phone.
HPTL7 said:
Thanks for the reply but as stated earlier in my first post, i said that pc companion does not detect my phone.
Click to expand...
Click to collapse
I know, but I wasn't sure if you tried it with the repair method. If you just plug your phone in to the pc, it won't recognize it. But when you use the repair method, pcc tells you to power off the phone, and bring it into flashmode
St.Jimmy90 said:
I know, but I wasn't sure if you tried it with the repair method. If you just plug your phone in to the pc, it won't recognize it. But when you use the repair method, pcc tells you to power off the phone, and bring it into flashmode
Click to expand...
Click to collapse
when i do it pcc tells me to connect a phone.
HPTL7 said:
when i do it pcc tells me to connect a phone.
Click to expand...
Click to collapse
When I open up pcc and select "Support Zone" - "phone / tablet software update" - "repair phone" it'll ask what phone you have, then you select it, it will download the firmware and ask you to power off the phone and plug it in while holding vol up
St.Jimmy90 said:
When I open up pcc and select "Support Zone" - "phone / tablet software update" - "repair phone" it'll ask what phone you have, then you select it, it will download the firmware and ask you to power off the phone and plug it in while holding vol up
Click to expand...
Click to collapse
Sorry my bad. You were right.
However i don't think i had a repair option. It is currently downloading a firmware i think.
I'll keep you updated.
Thanks a lot.
HPTL7 said:
Sorry my bad. You were right.
However i don't think i had a repair option. It is currently downloading a firmware i think.
I'll keep you updated.
Thanks a lot.
Click to expand...
Click to collapse
No worries, if this doesn't work try again with flashtool, and select everything at wipe
St.Jimmy90 said:
No worries, if this doesn't work try again with flashtool, and select everything at wipe
Click to expand...
Click to collapse
It did not work.
How do i try that repair thing you mentioned?
HPTL7 said:
It did not work.
How do i try that repair thing you mentioned?
Click to expand...
Click to collapse
nvm, found out how to do it. Completed it but it still does not work.
Is it cause i need at least 50% battery? If so, is there any way of doing so? because if i connect to wall charger it does the sony logo restart loop and when i connect to pc it goes in mtp mode.
HPTL7 said:
nvm, found out how to do it. Completed it but it still does not work.
Is it cause i need at least 50% battery? If so, is there any way of doing so? because if i connect to wall charger it does the sony logo restart loop and when i connect to pc it goes in mtp mode.
Click to expand...
Click to collapse
I don't think it's because of your battery level..... I'm sorry, but I can't help you on that....
I think you have to send it to sony for repair. As long as you haven't modified anything on your phone they should repair it
Edit: Before you send it to sony, try their chat, sometimes they can help
Your bootloader is unlocked? And have you tried flashing ftf using flashtool?
Sent from my C6603 using Tapatalk
pjgowtham said:
Your bootloader is unlocked? And have you tried flashing ftf using flashtool?
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
I am not sure whether my bootloader is unlocked or not. is there anyway i can check?
HPTL7 said:
I am not sure whether my bootloader is unlocked or not. is there anyway i can check?
Click to expand...
Click to collapse
If you dont know bootloader unlock, its most probably its locked. Grab an ftf and flash with flashtool. Usually update service works.
Sent from my C6603 using Tapatalk
I have done that before so that means it should be unlocked.
Now what do i do?

Z3 Plus Break DeadBoot

hi
i have a Z3+ E6533 deadboot
i flashed wrong ftf file
i flashed Z5 ftf and its brack
no response to charger and no response led fastboot .
my sony work good , i just want to update with flashtool and i flash wrong file
please help me
Flash again with right ftf file.
waseemakhtar said:
Flash again with right ftf file.
Click to expand...
Click to collapse
not detect fastboot and flashmod for flashtool
no green light led
saber_fakhamati said:
not detect fastboot and flashmod for flashtool
no green light led
Click to expand...
Click to collapse
Unplug the phone from your pc then press and hold the power button and volume up button.. Till you feel it vibrate then release and hold volume down button and plug the USB wire connected to the PC. Flashtool should then recognise your phone.
angvil said:
Unplug the phone from your pc then press and hold the power button and volume up button.. Till you feel it vibrate then release and hold volume down button and plug the USB wire connected to the PC. Flashtool should then recognise your phone.
Click to expand...
Click to collapse
:| :| :|
i tell you its hard break
you tell me hold the power button and volume up button!?!?!?!!
saber_fakhamati said:
:| :| :|
i tell you its hard break
you tell me hold the power button and volume up button!?!?!?!!
Click to expand...
Click to collapse
Dude chill I was just trying to help.
angvil said:
Dude chill I was just trying to help.
Click to expand...
Click to collapse
ok tnx
sorrrryyyy , this phone not even one week work for me and i depresd
and sory for bad bad bad english
saber_fakhamati said:
ok tnx
sorrrryyyy , this phone not even one week work for me.
and sory for bad bad bad english
Click to expand...
Click to collapse
Did you try to fix phone option in Sony pc companion?
angvil said:
Did you try to fix phone option in Sony pc companion?
Click to expand...
Click to collapse
not detect usb
saber_fakhamati said:
not detect usb
Click to expand...
Click to collapse
Did you even try the power button and volume up (together at the same time) thing?
angvil said:
Did you even try the power button and volume up (together at the same time) thing?
Click to expand...
Click to collapse
yes not work
saber_fakhamati said:
yes not work
Click to expand...
Click to collapse
Guys, i have the same problem. No any indication. No vibro. Nothing. Only black screen. But in computer "QHSUSB_BULK". Pls help me too.
Daeernis said:
Guys, i have the same problem. No any indication. No vibro. Nothing. Only black screen. But in computer "QHSUSB_BULK". Pls help me too.
Click to expand...
Click to collapse
Same here. Need help.
have you tried press vol down and plug it to PC via USB cable? if the led is green you can flash ftf
Daeernis said:
Guys, i have the same problem. No any indication. No vibro. Nothing. Only black screen. But in computer "QHSUSB_BULK". Pls help me too.
Click to expand...
Click to collapse
Try to repair with emma, it helped me when I bricked my z5
Of course, install all drivers, flashmode, fastboot, adb and try again
Your device is softbricked as the pc can recognize it as qhsus_bulk so you have to try and eventually you will succeed
kristijan15 said:
Try to repair with emma, it helped me when I bricked my z5
Of course, install all drivers, flashmode, fastboot, adb and try again
Your device is softbricked as the pc can recognize it as qhsus_bulk so you have to try and eventually you will succeed
Click to expand...
Click to collapse
Can you elaborate???? What is emma?
njaya95 said:
Can you elaborate???? What is emma?
Click to expand...
Click to collapse
Read more here,
I think that unlocked bootloader is required for this to work but I am not sure
http://developer.sonymobile.com/open-devices/flash-tool/how-to-download-and-install-the-flash-tool/
kristijan15 said:
Read more here,
I think that unlocked bootloader is required for this to work but I am not sure
http://developer.sonymobile.com/open-devices/flash-tool/how-to-download-and-install-the-flash-tool/
Click to expand...
Click to collapse
Yeah I googled it earlier and found it is nothing but a flashtool. But thanks for the help.

Dead D2005

Hi, my phone is dead (I think)...
No flashmode/fastboot, no boot, no any led after connecting to pc or anywhere (but pc show unrecognized device- LOL)
Device recognized as QHSUSB__BULK
Is there a way to fix it?
Someone help?
Ahateon said:
Hi, my phone is dead (I think)...
No flashmode/fastboot, no boot, no any led after connecting to pc or anywhere (but pc show unrecognized device- LOL)
Device recognized as QHSUSB__BULK
Is there a way to fix it?
Someone help?
Click to expand...
Click to collapse
What happened?
What happened?
Click to expand...
Click to collapse
Repartition internal memory
Download mode and flash mode still needs to work, as it's in the device itself, and not in the storage memory
Download mode and flash mode still needs to work, as it's in the device itself, and not in the storage memory
Click to expand...
Click to collapse
Tried flash mode, but not work. Xperia Companion / Flashtool not detect anything.
Download mode? How?
Ahateon said:
Tried flash mode, but not work. Xperia Companion / Flashtool not detect anything.
Download mode? How?
Click to expand...
Click to collapse
When you tried pressing Vol- and putting the cable, it show blue led?
Ahateon said:
Tried flash mode, but not work. Xperia Companion / Flashtool not detect anything.
Download mode? How?
Click to expand...
Click to collapse
Download mode: Power + Volume Down
Flash mode: Power + Volume Up
I actually do have a guide for noobs, maybe this will help you: http://forum.xda-developers.com/xperia-e1/general/xperia-e1-rooting-flashing-recovery-t3051225
When you tried pressing Vol- and putting the cable, it show blue led?
Click to expand...
Click to collapse
Nope. Blue led show only for a very short moment.
Kizoky said:
Download mode: Power + Volume Down
Flash mode: Power + Volume Up
I actually do have a guide for noobs, maybe this will help you: http://forum.xda-developers.com/xperia-e1/general/xperia-e1-rooting-flashing-recovery-t3051225
Click to expand...
Click to collapse
hi. actually i have the same problem. can anybody guide me through this mess ? i really need to use this device as soon as possible. my model is D2005. thank you
Same Happend this to me.. I tried to partion SDcard using Aparted app but i forgot to select the external Storage... So what i done.. Changed Phone Motherboard Using warranty (3year warranty) now all okay
[email protected] said:
Same Happend this to me.. I tried to partion SDcard using Aparted app but i forgot to select the external Storage... So what i done.. Changed Phone Motherboard Using warranty (3year warranty) now all okay
Click to expand...
Click to collapse
i did have a thought on changing the phone motherboard but i can't seem to find it in my country and i've used up my warranty. i don't want to send it to sony center because they'll charged me with unreasonable services fee. i prefer to repair it by myself but i don't know the steps and where should i start from.
is dead
Hi, my phone is dead (I think)...
No flashmode/fastboot, no boot, no any led after connecting to pc or anywhere (but pc show unrecognized device- LOL)
Device recognized as QHSUSB__BULK
Is there a way to fix it?
Someone help?:crying::crying::crying:
sbairayen2 said:
Hi, my phone is dead (I think)...
No flashmode/fastboot, no boot, no any led after connecting to pc or anywhere (but pc show unrecognized device- LOL)
Device recognized as QHSUSB__BULK
Is there a way to fix it?
Someone help?:crying::crying::crying:
Click to expand...
Click to collapse
Hi,
here the solution, but you need mmcblk0.img from a working Xperia E1: forum.hovatek.com/thread-19721.html
porcodio123 said:
Hi,
here the solution, but you need mmcblk0.img from a working Xperia E1: forum.hovatek.com/thread-19721.html
Click to expand...
Click to collapse
Thank you bro <3
sbairayen2 said:
Thank you bro <3
Click to expand...
Click to collapse
have you tries the solutions ? if it is working do share the update with me
hzim said:
have you tries the solutions ? if it is working do share the update with me
Click to expand...
Click to collapse
No I buy a new phone alcatel pixi 4 "4'
And i wash the Xperia E1 with water?

Categories

Resources