am just asking for the fastest & stable ... dont give me an answer that tells you have to try & what am i looking for bla bla bla
what is the fastest stable rom ?
Kernel ?
I/O Scheduler ?
Governor ?
Voltage ?
any other setting or apps that will help ?
PLZ PLZ
just give me the fastest & stable no need to tell me more ... simple & thakns
Recommend. Miui!!!!! ( made in China )
jaln1987 said:
Recommend. Miui!!!!! ( made in China )
Click to expand...
Click to collapse
whats that got to do with my question ?
Slim 3.6
Semaphore 1.1.1sbm
smartass v2/sio
LMK 75mb
sd card cache 1024mb
network tweak
chainfire sensitivity
deep idle ON
remove unwanted apps
Option to OC (i use 1.1ghz) but its not really needed
Sent using TCP/IP
gsw5700 said:
Slim 3.6
Semaphore 1.1.1sbm
smartass v2/sio
LMK 75mb
sd card cache 1024mb
network tweak
chainfire sensitivity
deep idle ON
remove unwanted apps
Option to OC (i use 1.1ghz) but its not really needed
Sent using TCP/IP
Click to expand...
Click to collapse
keep on restarting & force closing
although i wipe everything before installing ..... ???
any idea ?
& i cant find SIO ... only noop & deadline & simple I/O
same is for the LMK
gsw5700 said:
Slim 3.6
Semaphore 1.1.1sbm
smartass v2/sio
LMK 75mb
sd card cache 1024mb
network tweak
chainfire sensitivity
deep idle ON
remove unwanted apps
Option to OC (i use 1.1ghz) but its not really needed
Sent using TCP/IP
Click to expand...
Click to collapse
aha ok i see
i did them all but still no sio ... installed scripts but no sio
should i uninstall the original script ?
Not sure but i remember something about lmk causing issues. Could be wrong but maybe try that on default.
I'm running slim ics 3.6, semaphore 1.1.1sbm but with everything default and am happy. Been using semaphore/slim ics combo for a month or so with no force closes at all.
Sent from my GT-P7500 using Tapatalk 2
You know, that question is a bit like asking "what is the healthiest dinner?" and expect to get to same answer from everyone.
Different roms are more stable for certain usage. That said, AOKP roms are most stable for me, I've had no issues at all on infinitum.
Non ics roms would be Darky 9.5, rock solid with working call recording. This is pretty widely recognized as a very stable rom.
Sent from my GT-I9000 using Tapatalk 2
asoom69 said:
aha ok i see
i did them all but still no sio ... installed scripts but no sio
should i uninstall the original script ?
Click to expand...
Click to collapse
you set smartass and sio using semaphore app. set min memory using ASS app from settings.
Sent using TCP/IP
I am using the Doc's Master Rom V11. So far I have no major problem. Only 1 issue, It always prompted me that i have Low On Space where in fact. I still have 1GB of phone memory..
adytum said:
You know, that question is a bit like asking "what is the healthiest dinner?" and expect to get to same answer from everyone.
Different roms are more stable for certain usage. That said, AOKP roms are most stable for me, I've had no issues at all on infinitum.
Non ics roms would be Darky 9.5, rock solid with working call recording. This is pretty widely recognized as a very stable rom.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
infinitum is great but in some games & apps its slow
thats why am looking for a very fast rom & kernel >>>>>
gsw5700 said:
you set smartass and sio using semaphore app. set min memory using ASS app from settings.
Sent using TCP/IP
Click to expand...
Click to collapse
i set it to smartass but still no sio ... not a big deal ok ...
but all these is from smerphone app ... when you go to nstools there is much less option & the highest cpu is 1000mhz
mean while in smerphone you can get it up to 1300 mhz but as soon you leave the apps it goes back to 1000 ... but every other setting stay as i choose ... & when you try to make the profile default as your profile the phone completely shut down
so i did as most of people think which is the fastest ... but still 2 things i cant do
sio
highest cpu ( 1300 ) am stuck with (1000 )
scubadude said:
Not sure but i remember something about lmk causing issues. Could be wrong but maybe try that on default.
I'm running slim ics 3.6, semaphore 1.1.1sbm but with everything default and am happy. Been using semaphore/slim ics combo for a month or so with no force closes at all.
Sent from my GT-P7500 using Tapatalk 2
Click to expand...
Click to collapse
i didnt say it was from lmk ... i was saying i didnt find lmk ... after i install the extra scripts i find it
Calient_Boy said:
I am using the Doc's Master Rom V11. So far I have no major problem. Only 1 issue, It always prompted me that i have Low On Space where in fact. I still have 1GB of phone memory..
Click to expand...
Click to collapse
i am on same rom and it never gives that issue, you may try low space warning msg fix.
Sent using i9000 running Doc's Master 4.0.4
asoom69 said:
i didnt say it was from lmk ... i was saying i didnt find lmk ... after i install the extra scripts i find it
Click to expand...
Click to collapse
goto ass>performance>free memory> you can use it as lmk
Sent using i9000 running Doc's Master 4.0.4
Related
Hi every one , iam running Ginger bread XWJVZ 2.3.6 and a custom ROM ( Hybrid Rom latest version XWJVXZ ) and semaphore jvz 2.1.1
I think the rom has Thunderbolt already built in , iam asking u guys what else can i tweak to make my phone faster ??? i have ROM toolbox and semaphore tweaker
thx
enigma575 said:
Hi every one , iam running Ginger bread XWJVZ 2.3.6 and a custom ROM ( Hybrid Rom latest version XWJVXZ ) and semaphore jvz 2.1.1
I think the rom has Thunderbolt already built in , iam asking u guys what else can i tweak to make my phone faster ??? i have ROM toolbox and semaphore tweaker
thx
Click to expand...
Click to collapse
CM 7.1....
zolah said:
CM 7.1....
Click to expand...
Click to collapse
as far as i know , CM is not as stable as Samsung based roms
any suggestions on sammy based tweaks ?
Stock odexed jvt, Semaphore kernel 2.1.1 bm, use smartassv2 governor and sio scheduler, remove all Samsung bloatware, use ext4, wipe cache and dalvik, set low memory to 64 mb
Sent using TCP/IP
Try tornado rom - you will never look back...
i heard about that, were can u download it? evrywhere ive looked for that some other stuff comes up, usually its foreign so dont understand it
GalaxySN00B:0 said:
i heard about that, were can u download it? evrywhere ive looked for that some other stuff comes up, usually its foreign so dont understand it
Click to expand...
Click to collapse
http://damiangto.emc2production.org/index.php?sid=efe259a88b31669283caeda4d6ac7d04
Click to expand...
Click to collapse
here ..Go try it out
gsw5700 said:
Stock odexed jvt, Semaphore kernel 2.1.1 bm, use smartassv2 governor and sio scheduler, remove all Samsung bloatware, use ext4, wipe cache and dalvik, set low memory to 64 mb
Sent using TCP/IP
Click to expand...
Click to collapse
ok i have set the governor to smartassv2 , i think i don't have samsung's bloatware already ( the stock apps that comes with rom )
iam already on ext4 ,wiped cash and dalvik
how can i set low memory to 64 ????????
also can you explain to me what is a governor ? and what will the smartassv2 do ? thx
enigma575 said:
ok i have set the governor to smartassv2 , i think i don't have samsung's bloatware already ( the stock apps that comes with rom )
iam already on ext4 ,wiped cash and dalvik
how can i set low memory to 64 ????????
also can you explain to me what is a governor ? and what will the smartassv2 do ? thx
Click to expand...
Click to collapse
use the semaphore app to set low memory value to 64 mb, more free memory means less lag when you run something. you get another 15mb or so witb bm kernel. The govenor basically controls how fast or slow the cpu runs and reacts to demand. Smartassv2 is responsive, especially with sio i/o scheduler. use semaphore app to set readahead to say 512mb, you might also like the more sensitive screen.
Sent using TCP/IP
gsw5700 said:
use the semaphore app to set low memory value to 64 mb, more free memory means less lag when you run something. you get another 15mb or so witb bm kernel. The govenor basically controls how fast or slow the cpu runs and reacts to demand. Smartassv2 is responsive, especially with sio i/o scheduler. use semaphore app to set readahead to say 512mb, you might also like the more sensitive screen.
Sent using TCP/IP
Click to expand...
Click to collapse
thanks so much , i hit the thank button
i have one more problem , which is the icon of WIFI and signal , they are always grey , when i apply a custom skin for the signal , it only shows up when i turn wifi on , when i turn wifi off , the signal returns to the grey color again , any fix ?
gsw5700 said:
use the semaphore app to set low memory value to 64 mb, more free memory means less lag when you run something. you get another 15mb or so witb bm kernel. The govenor basically controls how fast or slow the cpu runs and reacts to demand. Smartassv2 is responsive, especially with sio i/o scheduler. use semaphore app to set readahead to say 512mb, you might also like the more sensitive screen.
Sent using TCP/IP
Click to expand...
Click to collapse
I thought that with the "bm" kernal you lose HD recording.
You do lose hd recording, but you can still get great videos. If you do need full hd recording, flash non bm semaphor, after recording, flash bm back. Its very easy with sgs flasher
Sent using TCP/IP
pk1025 said:
I thought that with the "bm" kernal you lose HD recording.
Click to expand...
Click to collapse
you do lose hd recording indeed
iam now on cm 7.1 though
http://forum.xda-developers.com/showthread.php?t=1296927
Hi..
i'm now using cyanogenmod 7.2 RC5
At first. the rom is ok.. everything is fine.. but on my second day my sgm always
hangs and i need to remove the battery and restart it again..
it happens when i open internet browser and look for pictures,
when i'm using antutu benchmark
when i play some games (HD)
can anyone give me tips?
sorry for bad english...
i suggest to use RC0 from subpsyke. it is less buggy and all works fine. in version 1.1 also google maps is fixed. give it a try
tnx for the reply..
i thought rc5 is the latest and more less bug than earlier version..
rc5 from squadzone is different from rc0 from subskype.
RC0 from subskype is pure cm7.2 compiled from source. it comes with tweaks and apps directly from cm 7.2. no other things are added.
It's all work for me...
Maybe u need to reflash your ROM...n use chainfire3D for game...n over to much overclock n use it by daily with that..
I suggest run in 657 Mhz if u don't do nothing n give it over to 768Mhz or above if u play the game...
Sent from my GT-S5570 using xda premium
If tested rc5 also and everything was fine! try to flash it again with clean install, erase not working maps and get the older working version! Dont oc to high and everything should be fine!
Swyped from my GT-S5570L using xda app
bluestricker_21 said:
Hi..
i'm now using cyanogenmod 7.2 RC5
At first. the rom is ok.. everything is fine.. but on my second day my sgm always
hangs and i need to remove the battery and restart it again..
it happens when i open internet browser and look for pictures,
when i'm using antutu benchmark
when i play some games (HD)
can anyone give me tips?
sorry for bad english...
Click to expand...
Click to collapse
RC5 is working just fine for me... I tested it and it's stable, smooth and havent found any bugs till now. Try it again... it's really nice.
You can see for complete instructions on using/installing this rom at http://yagyagaire.blogspot.com/2012/01/cyanogen-mod-720-rc5-for-samsung-galaxy.html
Hello!!does sim toolkit work on this release?
Sent from my GT-S5570 using XDA App
Hi, I'm new here and I'm glad that with my first post I'd be able to help someone.
Dude, try a clean instalation, use 2.3.4 XXKPI GINGERBREAD as a base for the CM update and i think you wont have any further problems. At least it worked for me.
P.S. Strictly follow the instalation instructions described at the squadzone's theme!
Then ENJOY it!
thanks for all the answers
my galaxy mini is working fine now..
i reinstall gingerbread 2.3.4
then flash again cm7 rc5
for now i didn't find any problems
sorry for bad english
now i realize
galaxy mini with cm7 rc5 is great
it speed up my phone with 806 mhz processor
i use antutu benchmark and my galaxy mini gets 2000 plus scores!!!
thanks for developers who works very hard for sgm users
sorry for bad english
what the different between RC4 and RC5?
GT-S5570 cm 7.2.0 RC.4
madsa said:
what the different between RC4 and RC5?
GT-S5570 cm 7.2.0 RC.4
Click to expand...
Click to collapse
Read changelog please
Sent from my GT-S5570 using xda premium
yup... godell was right
Just waiting this night for release CM7RC5.1 fix bugs
For wifi theater and many more.
Take picture with power key
And volume to zoom.
Remove cdma.
Sory...for my english bad.
Sent from my GT-S5570 using XDA App
I found a problem...
When someone calling
The slide botton or what ever you called to that is not fix..
Sorry for bad english
mybe cause the called phone from cm9 so that must be the problem to solve by Master Squad to combine cm7 and cm9
I have problem too
when i updated into rc5, may baterry life was shorten upto 75%
bluestricker_21 said:
now i realize
galaxy mini with cm7 rc5 is great
it speed up my phone with 806 mhz processor
i use antutu benchmark and my galaxy mini gets 2000 plus scores!!!
thanks for developers who works very hard for sgm users
sorry for bad english
Click to expand...
Click to collapse
What sort of governor and i/o scheduler do you use? Do you use a third party app like No-Frills to set it or CyanogenMod's settings? I can only OC to 729MHz with InteractiveX gov, VR scheduler using No-Frills. Tried 806 and above but after a while the phone just freezes and reboots.
I did get a slightly better score on RC5.1 with 729 than RC4 with 734 MHz I noticed that graphics performance has increased greatly from RC4
Myth010 said:
What sort of governor and i/o scheduler do you use? Do you use a third party app like No-Frills to set it or CyanogenMod's settings? I can only OC to 729MHz with InteractiveX gov, VR scheduler using No-Frills. Tried 806 and above but after a while the phone just freezes and reboots.
I did get a slightly better score on RC5.1 with 729 than RC4 with 734 MHz I noticed that graphics performance has increased greatly from RC4
Click to expand...
Click to collapse
i'm using setCPU on my phone
I built this kernel for my daily use, now i decided to share it here!
Work with Nexus World Wide Version (i9023/i9020t).
※ Basically it is made for Official Stock ROM (JRO03E/JZO54K). it may NOT work with other ROMs.
Not working with CyanogenMod!
Main features of this kernel:
1.25GHz
Based on Linux Kernel 3.0.73
Based on AOSP
Touchwake ADVANCED (allowing you wake up your phone by touching screen when you got a notification ) (based on Ezekeel's work)
10-point multitouch
Force AC charging by chad0989
UKSM (Ultra Kernel Samepage Merging)
MTP (thanks to bedalus and Krarvind!)
High Bigmem
BLN by Ezekeel
BLD by Ezekeel
Powerkey Presses Counter
init.d support
Optimized CRC32 algorithm
SLUB
Custom Voltage by Ezekeel
mount dalvik-cache to /cache
undervolted
RCU Boost
Voodoo by supercurio
included busybox
USB OTG v5 by sztupy Read this. (not sure if this work on Jelly Bean)
CRT-off animation fix from CyanogenMod team.
PM_FAST
...
Default: interactive / sio
Thanks to all contributors of this kernel!
And welcome to fork it on my github.
Download vta2-kernel / Changelog
TODO:
Bluetooth battery drain fix.
ROW I/O scheduler ( kernel module )
...
Any Suggestion? Tell me here
hi crt is fix ?
leap_ahead said:
hi crt is fix ?
Click to expand...
Click to collapse
yes.
Thanks for the share.. works great.
krfoy said:
I built this kernel for my daily use, now i decided to share it here!
Tested on my Nexus S i9023 and it should also works on i9020.
Main features of this kernel:
1.24GHz
Based on Linux Kernel 3.0.38
Based on AOSP
for Nexus S JRO03E stock ROM
Bigmem
Touchwake
BLN
BLD
init.d support
Optimized CRC32 algorithm
SLUB
Custom Voltage
mount dalvik-cache to /cache
undervolt
Deep Idle
RCU Boost
Voodoo
included busybox
USB OTG v5
FSync control
CRT-off animation fix from CyanogenMod team.
This kernel uses smartassV2 and SIO as default governor and I/O schedulers.
Thanks to all contributors of this kernel!
And welcome to fork it on my github.
Download vta2-kernel #11 here.
Click to expand...
Click to collapse
Can you make a version with also fast charge? Anyway working great
Inviato dal mio Nexus S con Tapatalk 2
I'd like to see more feedback about this kernel as it looks promising. Thank you
Sent from my Nexus S using xda app-developers app
Kernel is good.. snappy.. nice performance..
There is no 1000mhz on the clock, so it's always on 1.24ghz ..
Pls add interactive governor.. I can't change the governor, only shows smartassv2 ...
Battery life not gr8.. But runs well.. power hungry games are smooth.. good overall..
Sent from my Nexus S using xda app-developers app
spupuz said:
Can you make a version with also fast charge? Anyway working great
Inviato dal mio Nexus S con Tapatalk 2
Click to expand...
Click to collapse
may be included in next stable release.
siddhesh.raikar said:
Kernel is good.. snappy.. nice performance..
There is no 1000mhz on the clock, so it's always on 1.24ghz ..
Click to expand...
Click to collapse
This is inspired by SAMSUNG Infuse 4G, which use the same CPU and do not have 1.0GHz step in its stock kernel.
when there are both 1.24 and 1.0GHz, the governor will prefer to use 1.24GHz. And i thought it may help governor switch between steps faster.
so it won't eat more battery in this case.
siddhesh.raikar said:
Pls add interactive governor.. I can't change the governor, only shows smartassv2 ...
Click to expand...
Click to collapse
I only built smartassV2(tweaked) into kernel. because it balance between battery life and performance.
There are also include kernel module of ondemand and conservative, you could load them by insmod if you like.
Thank you very much and must try it .
krfoy said:
This is inspired by SAMSUNG Infuse 4G, which use the same CPU and do not have 1.0GHz step in its stock kernel.
when there are both 1.24 and 1.0GHz, the governor will prefer to use 1.24GHz. And i thought it may help governor switch between steps faster.
so it won't eat more battery in this case.
I only built smartassV2(tweaked) into kernel. because it balance between battery life and performance.
There are also include kernel module of ondemand and conservative, you could load them by insmod if you like.
Click to expand...
Click to collapse
Thanks... Pls try and include HighBigMem in the next version...
thanks for your kernel! i will try it now and report back
EDIT: unfortunately kernel doesn't work for me - i use it with paranoidandroid and rom was really sluggish at first (maybe cache-related...). then i startet setcpu for adjustments and the phone stopped responding with "colorful snow" on the screen. i pulled battery to reboot. - maybe my 9023 doesn't like 1,24 ghz (it is a bit picky, but 1,2 ghz at stock vol was never a problem).
invd said:
thanks for your kernel! i will try it now and report back
EDIT: unfortunately kernel doesn't work for me - i use it with paranoidandroid and rom was really sluggish at first (maybe cache-related...). then i startet setcpu for adjustments and the phone stopped responding with "colorful snow" on the screen. i pulled battery to reboot. - maybe my 9023 doesn't like 1,24 ghz (it is a bit picky, but 1,2 ghz at stock vol was never a problem).
Click to expand...
Click to collapse
Not so sluggish at my side.
invd said:
thanks for your kernel! i will try it now and report back
EDIT:i startet setcpu for adjustments and the phone stopped responding with "colorful snow" on the screen. i pulled battery to reboot. - maybe my 9023 doesn't like 1,24 ghz (it is a bit picky, but 1,2 ghz at stock vol was never a problem).
Click to expand...
Click to collapse
same here with nstools
@OP or @DaXmax: Is there anything I can do to help at finding the problem? logcat? or is it just my phone being picky?
Deep idle? Are u sure it's fully working?
Sent from my Nexus S using xda app-developers app
ioplkj13 said:
Deep idle? Are u sure it's fully working?
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
Its working.
I may replace deep idle with CPUidle or IDLE2 by _thalamus in the future.
invd said:
@OP or @DaXmax: Is there anything I can do to help at finding the problem? logcat? or is it just my phone being picky?
Click to expand...
Click to collapse
try stock kernel or raise up voltage?
krfoy said:
try stock kernel or raise up voltage?
Click to expand...
Click to collapse
can you update OP with to do list feature that are you going to add?
krfoy said:
try stock kernel or raise up voltage?
Click to expand...
Click to collapse
yea, well, with stock kernel (and thalamus and matr1x and air kernel) everything runs fine, but i wanted to know, if there is a way to find out what exactly causes the problem with your kernel and my phone (which also might help somebody else). - raising the vol does not help that much, still some freezes from time to time (even though i'm above stock vols).
well im back to izs again i tried to search but search is unavailable now.. this time i need any recommendation for best performance /smoothness / battery life ( balanced ) since im newbie for all kinds of kernels and governors stuff
thank you
Mo Chedid said:
well im back to izs again i tried to search but search is unavailable now.. this time i need any recommendation for best performance /smoothness / battery life ( balanced ) since im newbie for all kinds of kernels and governors stuff
thank you
Click to expand...
Click to collapse
I`m using Lionheart as governor / ROW as scheduler , its the best thing i found for performance / smoothness / battery life
With medium use , wifi on almost all the time , after 24 hours i have 30% battery left.
With wifi off i get 2% drain during 8 hours overnight.
Olynth said:
I`m using Lionheart as governor / ROW as scheduler , its the best thing i found for performance / smoothness / battery life
With medium use , wifi on almost all the time , after 24 hours i have 30% battery left.
With wifi off i get 2% drain during 8 hours overnight.
Click to expand...
Click to collapse
what about min and max freq? and ill change values from No-frills cpu right?
Mo Chedid said:
what about min and max freq? and ill change values from No-frills cpu right?
Click to expand...
Click to collapse
Mine are max. 1000 mhz , min 300 mhz
Yes you can change them from No Frills cpu
i tried it but didnt really notice any change in performance and also SD unmounts..i heared about diana kernel..but i dont know how to flash or install
anyone?
EDIT:
ok i managed to flash from cwm menu but i have 2 rar files v 0.2 .rar and v 2.7 max uv.rar..which is better??
Mo Chedid said:
i tried it but didnt really notice any change in performance and also SD unmounts..i heared about diana kernel..but i dont know how to flash or install
anyone?
EDIT:
ok i managed to flash from cwm menu but i have 2 rar files v 0.2 .rar and v 2.7 max uv.rar..which is better??
Click to expand...
Click to collapse
if you are on IZS by Huexxx, flash kernel Diana v0.2 from IZS v0.2 - url blog => http://huexxxtuff.blogspot.com.es/2013/01/izs-rom-links.html
copy on sdcard, reboot in recovery, flash kernel diana v0.2.zip with CWM, wait, reboot.
with nofrills, set smartass2 / row for battery life.
I'm using Lionheart + ROW and it's just perfect. I've been with Zeus's ROMs since I got my OB, but now I changed my ROM for Avatar and guess what - still using Lionheart + ROW, which made me change kernel to MackayKernel Still i think Lionheart + ROW is awesome.
YkZ_1967 said:
if you are on IZS by Huexxx, flash kernel Diana v0.2 from IZS v0.2 […] set smartass2 / row
Click to expand...
Click to collapse
Vaiet said:
I'm using Lionheart + ROW and it's just perfect. I've been with Zeus's ROMs since I got my OB, but now I changed my ROM for Avatar and guess what - still using Lionheart + ROW, which made me change kernel to MackayKernel Still i think Lionheart + ROW is awesome.
Click to expand...
Click to collapse
Both are very good governors for IZS but not all kernels have both and be very carful not all governors are the same in all kernels.
Sent from my LG-P970 using xda app-developers app
Vaiet said:
I'm using Lionheart + ROW and it's just perfect. I've been with Zeus's ROMs since I got my OB, but now I changed my ROM for Avatar and guess what - still using Lionheart + ROW, which made me change kernel to MackayKernel Still i think Lionheart + ROW is awesome.
Click to expand...
Click to collapse
+1
alot of ROMS present which one is best keeping in mind just pure gaming.....
ksguptalive said:
alot of ROMS present which one is best keeping in mind just pure gaming.....
Click to expand...
Click to collapse
Only one updated kernel we have is CoCore, so it is best one. ROM, maybe HarshJelly/SamiOS for stock, or some CM (I think CM10.1 is most stable of all we have for now).
I used thunderzap 4.1 with jellymod 4.1 and was pretty dissapointed cuz games were not smooth...I will try Roms u mentioned...
Sent from my GT-I9070 using xda app-developers app
ksguptalive said:
alot of ROMS present which one is best keeping in mind just pure gaming.....
Click to expand...
Click to collapse
IMO, i think the best rom for gaming is CM, u are free to try any verson of it.
I/O scheduler & CPU governer definitions?
Hi
Can someone please give me the definitions & the best combo of I/O scheduler and CPU governer? i don't understand what do they mean exactly.
Jesseccentric said:
Hi
Can someone please give me the definitions & the best combo of I/O scheduler and CPU governer? i don't understand what do they mean exactly.
Click to expand...
Click to collapse
Checkout this two threads:
- CPU Governors explained in detail
- Brief info on CPU Governors and I/Os