My old HD7 digitalizer screen is not responding. I have a second identical htc hd7, can I put the old SDcard from the non working HD7 and put it in the second Hd7 and have all my content appear?
devGOD said:
can I put the old SDcard from the non working HD7 and put it in the second Hd7 and have all my content appear?
Click to expand...
Click to collapse
unfortunately, that will not work.
how will it work then??
menollonem said:
how will it work then??
Click to expand...
Click to collapse
MainltyRio said:
My old HD7 digitalizer screen is not responding. I have a second identical htc hd7, can I put the old SDcard from the non working HD7 and put it in the second Hd7 and have all my content appear?
Click to expand...
Click to collapse
it won't work. device will just reformat the card. basically, will result in a hard reset.
can I put the old SDcard from the non working HD7 and put it in the second Hd7 and have all my content appear?
unfortunately, that will not work.
Related
Hey every body, I found at Amazon websit that there is memory card for HTC Touch diamond.
So, is there is a way to change the internal storage?
Thank you
What!?
I don't think so (It's been talked about before) ... but please post a link to that page!!
It wasn't a memory card for Touch Pro?
http://www.amazon.com/Memory-TOUCH-...=UTF8&s=office-products&qid=1219236224&sr=8-2
They say its fully compatible with HTC touch Diamond... but i dont see no slot to stick it in, because there is none -.-
gebruikershaes said:
http://www.amazon.com/Memory-TOUCH-...=UTF8&s=office-products&qid=1219236224&sr=8-2
They say its fully compatible with HTC touch Diamond... but i dont see no slot to stick it in, because there is none -.-
Click to expand...
Click to collapse
...if its a software we would call it "bug"
amazon probably didn't do their research and assumed the diamond has a memorycard slot like most of the other htc phones.
Hi everyone. I just joined this forum and I am hoping to get some help from some wise jailbreaker out there..
I bought my G1 from T-Mobile a couple of weeks ago with the intent to jailbreak it and use it as a modem for my laptop. I finally got started on the project and I was stonewalled right from the get-go. Neither the original SD card in the phone nor my new 8GB SD card can be seen by either one of my computers. My desktop is running Windows XP Pro and my laptop is running Vista Home Premium. Neither one will see the SD card no matter what I do. The card does not show up in "My Computer" on either one of the systems, but shows up as "Drive J" in both of them under "Drive Mangement". But it says there is "No Media", so therefor nothing to format.
Since I can't even format the card, I am bogged down from the start. I am hoping someone out there can tell me what to do in order to jailbreak this phone, since that was the only reason I got it. I was perfectly happy with my HP6550 iPAQ otherwise...
Has anyone out there had the same problem?
have u tried formating the card to fat32?
You could try a sd reader. When you pluggin the phone in did you make sure to pull down the notification bar and click the usb thing and hit "Mount"?
Try going into settings, sdcard and storage and format the card that way. If not it sounds like a windows driver issue, you might want to try a card reader, or download and burn a live cd of linux something like ubuntu which will have no problem reading the android phone. You could also use hp as a card reader if it supports micro sdcards
You could just download the files you need through the internet on your phone also, I do all my flashing, downloading and modifing right on my g1, download something like linda or astro file manager from the market so that you can actually download the files
Thanks guys.
pistol4413: That is what I am trying to do according to instructions. But without the card beeing seen by Windows, it is sort of hard to format it...
crpercodani: Thanks for the tip. I will try a separate card reader. And there was no need to hit "mount". It all happened automatically and the phone said the card was mounted. Well, not in those words but it said the card was connected. I tried to unmount and remount again. Didn't do anything.
gridlock32404: I tried that (formatting in the phone). It did nothing. I will try a separate reader. The HP doesn't support micro SD, only mini and standard.
And I can't believe it would be a Windows driver issue both in my XP Pro system and Vista Premium...?
Provided I get this solve first of course, I am also curious if you might have detailed, reliable instructions on how to go through the whole root thing and getting the phone rooted and setup to provide a wireless network for my laptop? Right now I am following instructions from Anthony Moreno on YouTube. He has a few instructional videos on there that seem to make sense. But if any of you know of some other source for instructions, please let me know. I'd appreciate any help I can get to make this a smooth project and not a major headache...
There are many detailed posts and stickys, on this q and a there is a thread for the one click that is really good, it is written by david and is very good instructions
Thanks for the mention gridlock32404. I have a detailed guide in my sig for the one click method. Or if you search for root/hack g1 then there is a good guide that i used to root my phone back in the day. If you use my method and encounter any problems pm me because i will see that faster than a post in the thread also if you do it and go with the rom in the guide (latest cyanogen rom) it comes with a tether app to do exactly what want (at least i think it does)
They are good instructions david and I think that it is warranted to get sticky since most of the new g1 users are using it, I would perfer them to do the old fashioned way so they learn more about what they are doing but the one click is bringing a lot of new users to rooting since it is less scary
gridlock32404 said:
They are good instructions david and I think that it is warranted to get sticky since most of the new g1 users are using it, I would perfer them to do the old fashioned way so they learn more about what they are doing but the one click is bringing a lot of new users to rooting since it is less scary
Click to expand...
Click to collapse
I completely agree. People should root their phones the long way first but one click is good for people that know what they are doing
I got 2 guys that work at my local tmobile that asked me if next time I come pay my bill if I could root their phones for them so I might just give that one click a try. I got a ? For you on that regard, can I just pop my sdcard in there phones and set them up that way and when I flash the new rom I can put back in their card without any damge to mine when I put in back in my phone
gridlock32404 said:
I got 2 guys that work at my local tmobile that asked me if next time I come pay my bill if I could root their phones for them so I might just give that one click a try. I got a ? For you on that regard, can I just pop my sdcard in there phones and set them up that way and when I flash the new rom I can put back in their card without any damge to mine when I put in back in my phone
Click to expand...
Click to collapse
As long as you power your phone down first i can't see any why your sdcard would get damaged.
That's what I thought, so I guess I will do that tomorrow then or monday
You should tell them you will partition their sdcards and install the new spl, if they leave a mytouch on the table and look away lol.
It's a mytouch and a g1. The g1 guy wants hero so I would set that all up for him. Why do you say that about the mytouch, it's gonna be my first go on that so I am unsure
gridlock32404 said:
It's a mytouch and a g1. The g1 guy wants hero so I would set that all up for him. Why do you say that about the mytouch, it's gonna be my first go on that so I am unsure
Click to expand...
Click to collapse
The mytouch was a joke payment method. To do one click root on the mytouch make sure you put the 1.33.2005 spl on it, since any spl for the g1 (hard or eng) will brick it. Also you might want to get the amon_ra recovery image for the mytouch
Yeah I was planning to put the amon's recovery on their since they can't use the recovery console anyway, I was aware of the spl difference though so I was good on that, I did read up alittle on it
My digitizer is broken on my tilt and i was just wondering if there where any WinMo 6.5 rom without an alignment screen popping up and causing me to get stuck. Also i cant use the welcome.not route because my memory card reader on my tilt stopped working also. Please Help!!!
Time to get a new phone?
Shoutzen said:
My digitizer is broken on my tilt and i was just wondering if there where any WinMo 6.5 rom without an alignment screen popping up and causing me to get stuck. Also i cant use the welcome.not route because my memory card reader on my tilt stopped working also. Please Help!!!
Click to expand...
Click to collapse
My tip: Get a new digitizer from ebay, it will set you back about 9$. In my opinion it is easy to replace. Remeber to read the service manual for instructions.
Hello all, I have an HTC HD7 TMOUS - UNLOCKED, working in Asia Subcontinent. I bought the phone and was stupid enough to update it to mango as soon as I got home. Now I'm stuck with 5.12 Bootloader. Okay, so I followed all the tutorials and then:-
1) Made a goldcard for one of my microsd cards. It's 1 GB so using EASEUS partition I built it down to 512mb on FAT32.
2) Extracted RUU_Signed, renamed it to SCHUIMG.nbh and copied it to card. Then patched my goldcard on it using Goldcardtool.
3) I made a USB Y cable myself as I didn't have one. I cut 2 Data Cables. One that I had to connect to my HD7 and the other that I had to connect to my HTC Evo 3D, This device I had to use as a card reader (USB Mass Storage) as I had no access to a female usb port. I joined the black and red wires of power and both data cables. I only joined the green wire with green and white with white of the two data cables.
4) I loaded my HD7 in USB host mode and then connected the other side of Y cable to Evo 3D. It began charging but didn't display the dialogue for USB Mass Storage. I switched the wires, and still the same thing happened. I booted my E3D into recovery, so that I can mount mass storage from there, clicked on mount, still nothing.
Nothing happens, it just keeps saying 'Enter USB Host Mode..'. I let the connection stay for 5+ mins before getting angry and taking it out. If anyone has any clue or idea or solution, please put it forward. I spent a great deal of time trying to unlock my phone and also writing this thread. Lol.
Thanks to anyone in advance who replies.
XDA Rocks.
Come onnnnn, 167 views and no replies?
Sent from my HTC EVO 3D X515m using XDA
Ah, seriously the support's much better over the Android section. :/
maybe try asking in this thread, here.
i haven't ever used Goldcard method, so can't comment further.
sh4d0w86 said:
maybe try asking in this thread, here.
i haven't ever used Goldcard method, so can't comment further.
Click to expand...
Click to collapse
Thanks, I'm gonna try that too now. Just btw, my bootloader shows 'Serial' written down where it's supposed to show 'USB' as I saw in many pics. Does this mean something bad?
AliiYousuf said:
Thanks, I'm gonna try that too now. Just btw, my bootloader shows 'Serial' written down where it's supposed to show 'USB' as I saw in many pics. Does this mean something bad?
Click to expand...
Click to collapse
that could mean a half brick. if it is, the method described by the tutorial, i believe, will unbrick Bootloader.
sh4d0w86 said:
that could mean a half brick. if it is, the method described by the tutorial, i believe, will unbrick Bootloader.
Click to expand...
Click to collapse
How come its half-bricked? When I bought the phone it was barely used, I updated it to Mango myself and then used it. Never tried to unlock it or anything. And now that I tried, I noticed Serial already. can I have a link to types of bricks and solutions etc? Thanks a lot.
AliiYousuf said:
How come its half-bricked? When I bought the phone it was barely used, I updated it to Mango myself and then used it. Never tried to unlock it or anything. And now that I tried, I noticed Serial already. can I have a link to types of bricks and solutions etc? Thanks a lot.
Click to expand...
Click to collapse
well, first...
does Serial change to USB when you connect your device to your computer via USB cable?
if it doesn't, it is half-bricked.
half brick: broken Bootloader, but a functional device
full brick: broken Bootloader and a nonfunctional device
no!!!
if the serial is not changing to USB...that means you dont have a driver on your pc.....and it is not being recognized by the pc....
Install the latest ActiveSync driver and it should work
Hello friends, I'm sorry to improve open multiple threads on htc 8X, but I want to know some things that I think are important about htc 8x.first, how to flash original stock rom{not reset phone}, else how to install drop files on device and third, I 'd like to write in this topic people have htc 8x and what do about the phone.
Thanks in advance and again I apologize.
aSpirit81 said:
how to flash original stock rom{not reset phone}
Click to expand...
Click to collapse
You should find some roms here, with instructions:
http://forum.xda-developers.com/showthread.php?t=2094084
aSpirit81 said:
how to install drop files on device
Click to expand...
Click to collapse
I'm not sure what you mean by 'install drop files on device', I'll assume you meant placing files on the phone (using a USB cable) and then installing them. This is something you can't do right now.
Since we're talking about an HTC 8X, which doesn't have an SD card slot to install packaged apps (XAPs), your current only option to install anything on the phone is the Deployment tool (from the WP8 SDK), which is limited to unencrypted apps (so apps from the store wont work), and you can't have more than 3 of them installed at a time.
aSpirit81 said:
and third, I 'd like to write in this topic people have htc 8x and what do about the phone.
Click to expand...
Click to collapse
Wow, you ate a lot of words from there, I'll assume you meant "I'd like those people, who have an HTC 8X phone to write what they think about the device."
I own one. I was pretty happy with it, however I upgraded to another phone since. It's a really good phone, slim, light, has a ton of nice features, easy to use, etc. If you're coming from another platform be prepared to let go of some stuff you were used to having, as Windows Phone works on some slightly different philosophies. But there are a lot of ways a Windows Phone is simply better than other OS-es, in things like: UI responsiveness and speed, the amount of features packed into a device, and the live tiles are something I simply couldn't live without anymore.
Especially now, since the 8X's price dropped drastically, I still consider it a high-end phone, at least until the next wave of 5 and 6" phones come out.
As this is an HTC 8x related question mostly, It'd have been better placed in this forum: http://forum.xda-developers.com/htc-8x
Cheers
i try with rom update utillity,but got error 270,image corrupted.i try everything,but nothing...i dont know how to restore retail rom on my htc...
just one post ?
i want to flash stock europe 1.00 rom on my htc 8x,beacuse my cid is htc_032....btw,got error 338 PK_VERIFY_ERROR,says please flash key image retail...i dont know what this mean...pls help me.