I got this old model of galaxy tab 7" from sprint but I stopped its services....
An update is available but when I install the update it only finishes about 1/4 of the installation and a triangle with an exclamation point appears.
I also tried manual update steps in the internet but a small triangle with exclamation point is also appearing.
Firmware: 2.2.1
Hardware: P100.08
Kernel: 2.6.32.9
Build: SPH-P100.EB28
Related
Today I opened Samsung Kies and have it upgrade to Version 2.0.0.11014_49. After Kies upgrade completed I connected my SGS to the USB port and Kies told me that new firmware upgrade is available. My current firmware is DXJPA and the new offered firmware is DXJPE.
I click the upgrade firmware button and Kies started to download the file. After the file download finished, the upgrade process started, my SGS showed text "Downloading Do Not Turn Off Target!!!", but suddenly notification pop up from Kies saying "Failed to convert to Upgrade Mode", and right after it, the upgrade process stopped and my SGS stopped working.
What should I do guys? I desperately need help here
Download the Official DXJPE firmware from
http://www.multiupload.com/2WEUVB083T
Password : samfirmware.com
803.PIT Link http://www.multiupload.com/6JX2LEUCTY
Put your Galaxy S in DOWNLOAD MODE and flash using Odin.
Fortunately, after trying to restarting, my phone back to normal again, looks like the upgrade process didn't touch the existing firmware yet.
Thanks for the help anyway
Hi to all
I have a Galaxy Tab 1000N, follow the steps to install the 2.3, but to finish installing the dbdata.tar, the galaxy never restart.
The screen remains totally black, but if I can connect to the pc and using odin. Any suggestions?
Used odin v1.7 then do the same connect ur tab even it 's on a black screen this happen to me
hi
another problem
reinstall the firmware 2.2 P1000NUBJM2, the galaxy started, I can
use it, but pressing the power button to turn off the screen
restarts, each time when press the power button to black screen the galaxy restarts... ... any help?
You can fix this problem by flashing Humberos kernel from this thread
http://forum.xda-developers.com/showthread.php?t=974408
However your boot loader may be locked/signed which will prevent you from installing the kernel, you can however patch your kernel by reading this post
http://forum.xda-developers.com/showthread.php?t=888071
After that flash humberos kernel using ODIN
Well, i tried the above.. and i couldnt figure it out -_-
So i flashed the original firmware while the screen was still blank, and after it restarted the screen came on. But its now stuck at the Samsung Logo.
Files: gt-p1000_mr.pit
PDA: P1000NUBJM2
Phone: modem.bin (extracted from the above firmware)
Where do i go from this point, wish i knew
Found the solution here: nontent.blogspot.com/2011/05/samsung-galaxy-tab-blank-screen-after.html
hope it works for you too
greetings all
can somebody help me?
tonight i've tried to root my galaxy tab (anycall SHW-M180s) with odin and CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar
everything done according to guide
open odin, in pda section choose CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar
put the device to download mode, plug to computer, uncheck the re partition and click start
everything works well except my SHW-M180s not booting, only shows it's splash screen and then pure black screen. and it's looping over and over again
unfortunately i forgot to check my pda version via *#1234#
my device is on 2.3.3
so someone can help me how can i bring my device to life again?
thanks before and sorry for my bad english
kairanz said:
greetings all
can somebody help me?
tonight i've tried to root my galaxy tab (anycall SHW-M180s) with odin and CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar
everything done according to guide
open odin, in pda section choose CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar
put the device to download mode, plug to computer, uncheck the re partition and click start
everything works well except my SHW-M180s not booting, only shows it's splash screen and then pure black screen. and it's looping over and over again
unfortunately i forgot to check my pda version via *#1234#
my device is on 2.3.3
so someone can help me how can i bring my device to life again?
thanks before and sorry for my bad english
Click to expand...
Click to collapse
I have the same problem here
My device details were as follows:
Model: SHW-M180S
Firmware version: 2.2.1
Baseband version: M180S.EB18.1635.ST
Kernel version: 2.6.32.9
[email protected] #1
Build Number: FROYO.EB22
Could someone here help me revive my Tab?
---------- Post added at 01:29 AM ---------- Previous post was at 01:14 AM ----------
kairanz said:
greetings all
can somebody help me?
tonight i've tried to root my galaxy tab (anycall SHW-M180s) with odin and CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar
everything done according to guide
open odin, in pda section choose CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar
put the device to download mode, plug to computer, uncheck the re partition and click start
everything works well except my SHW-M180s not booting, only shows it's splash screen and then pure black screen. and it's looping over and over again
unfortunately i forgot to check my pda version via *#1234#
my device is on 2.3.3
so someone can help me how can i bring my device to life again?
thanks before and sorry for my bad english
Click to expand...
Click to collapse
I tried to root my galaxy tab (anycall SHW-M180s) with odin
Everything went according to guide
opened odin, put in PIT P1_add_hidden.pit
In pda section, I choose P1000XWJJ4-REV03-ALL-CL639474.tar.md5
I Managed to put the device to download mode,
Plugged in to my computer
I checked the re-partition and clicked start.
Everything went on well except my SHW-M180s does NOT boot.
It only shows it's splash screen and then back to the black screen.
when i connect the usb Cable, Only the camera lights and Nothing more happens.
Could someone here give me a step by step procedure to bring it back to Normal?
My Tab Details were:
Model: SHW-M180S
Firmware version: 2.2.1
Baseband version: M180S.EB18.1635.ST
Kernel version: 2.6.32.9
[email protected] #1
Build Number: FROYO.EB22
Hello,
Try on this thread. Contact first rnc_ebm via mail or PM and ask him/her if this firmware suits to your Tab before loading it! Because if this is not the correct firmware then you will have bigger problems then you are in currently.
http://forum.xda-developers.com/showthread.php?t=1249200&highlight=M18
I got this old model of galaxy tab 7" from sprint but I stopped its services....
An update is available but when I install the update it only finishes about 1/4 of the installation and a triangle with an exclamation point appears.
I also tried manual update steps in the internet but a small triangle with exclamation point is also appearing.
Firmware: 2.2.1
Hardware: P100.08
Kernel: 2.6.32.9
Build: SPH-P100.EB28
Can you take a pic of the exclaimation mark sign? You may need to learn to flash a firmware using odin or heimdall. Go to develoent forum and search for cdma stock rom or sprint stock rom. Collow their instruction carefully.
The exclamation was something like this but instead of the phone beside the triangle, it is the android logo...
Hi everyone, I have a Galaxy S GT-i9000M which had an initial S gif looping problem
I installed on my windows tablet the SAMSUNG USB DRIVERS FOR MOBILE PHONES driver and 3 loader versions of Odin v 1.70, v 1.82, v3.12.3 and I know how to work them with the NORTH AMERICAN VERSION STOCK ROM firmwares for android FROYO GT-i9000M UGKC1 UGKC1 BMCKC1 Sbl,.... GT-i9000M UGJC2 UGJC2 BMCJL2 Sbl, ...... GT-i9000m UGJK3 UGJK3 BMCJK3 Sbl and I also downloaded the North American stock firmware Android GINGERBREAAD GT-i9000m UGKG3 UGKG3 BMCKG3 Sbl
After adding the respective tar.md5 files for the ODIN programs for PDA, PHONE and CSC I get the PASS green icon top left of ODIN screen saying that the Odin prgrams have flashed the stock ROM to the phone and I should expect the phone to reboot and to wipe the data clean and I should get a stock Android OS screen
Instead I either get a small DAISY WHEEL icon on a black screen that's stuck and not spinning or the screen with Galaxy S GT I900M on a black screen which loops continuously
Does my phone have a hardware issue or should I use the ODIN 3.12.3 with the PIT file for the GT i9000M and do a RE-PARTION box check .
If Yes where can I download the PIT file for my GT i9000M (NOTE PLEASE THAT THIS IS NOT THE GT i9000 ,mine is the i9000M )
I have also tried 3 USB to micro USB cables and they all work with ODIN
Any help would be appreciated
thanks
namor
TORONTO CANADA