My LGP970 was stuck in the LG logo for very long since this morning after a reboot. I tried Flashing with Smart Tool but to no avail. Any other help please?
Note: I'm from Singapore and I use F/W from Singapore/Singtel. But it didn't help.
Here the log.
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec :EMMC writing start
00:02.0 Sec :Success to erase
00:02.0 Sec artition size is 128 KBytes
00:02.1 Sec :Success to erase
00:02.1 Sec artition size is 128 KBytes
00:02.1 Sec :Success to erase
00:02.1 Sec artition size is 384 KBytes
00:02.2 Sec :Success to erase
00:02.2 Sec artition size is 4992 KBytes
00:04.6 Sec :Success to erase
00:04.6 Sec artition size is 5248 KBytes
00:06.0 Sec artition size is 0 KBytes
00:06.0 Sec :Success to erase
00:06.0 Sec artition size is 2048 KBytes
00:07.2 Sec artition size is 0 KBytes
00:07.2 Sec :Success to erase
00:07.2 Sec artition size is 419968 KBytes
01:31.2 Sec artition size is 0 KBytes
01:31.2 Sec artition size is 0 KBytes
01:31.2 Sec artition size is 0 KBytes
01:31.2 Sec :Success to erase
01:31.2 Sec artition size is 128 KBytes
01:31.2 Sec artition size is 0 KBytes
01:31.4 Sec SI RAM writing start
01:31.4 Sec :Trying to communicate with IFX modem
01:36.4 Sec :Confirm IFX communication
01:36.4 Sec SI RAM writing end
01:36.4 Sec :Start PSI RAM
01:36.4 Sec :EBL writing start
01:52.6 Sec :Start EBL
01:52.7 Sec :Set capabilities to be used
01:53.7 Sec :Baudrate Change: 115200bps ===> 3000000bps
01:53.7 Sec :Set flash ID complete
01:53.7 Sec :Set Infineon CFI Information 1
01:53.7 Sec :Set Infineon CFI Information 2
01:53.7 Sec SI Download start
01:53.8 Sec :Set FLASH address
01:53.9 Sec SI Download success
01:53.9 Sec :SLB Download start
01:54.0 Sec :Set FLASH address
01:55.3 Sec :SLB Download success
01:55.4 Sec :Aeneas Download start
01:55.8 Sec :Erase was executed rightly!
01:55.8 Sec :Set FLASH address
01:58.4 Sec :Aeneas Download success
01:58.4 Sec :Code Download start
01:58.5 Sec :Erase was executed rightly!
01:58.6 Sec :Set FLASH address
03:05.0 Sec :Code Download success
03:05.0 Sec :RomBinary Download success
03:05.0 Sec :Target is resetting
03:05.0 Sec ownload complete
oceanax said:
My LGP970 was stuck in the LG logo for very long since this morning after a reboot. I tried Flashing with Smart Tool but to no avail. Any other help please?
Note: I'm from Singapore and I use F/W from Singapore/Singtel. But it didn't help.
Here the log.
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec :EMMC writing start
00:02.0 Sec :Success to erase
00:02.0 Sec artition size is 128 KBytes
00:02.1 Sec :Success to erase
00:02.1 Sec artition size is 128 KBytes
00:02.1 Sec :Success to erase
00:02.1 Sec artition size is 384 KBytes
00:02.2 Sec :Success to erase
00:02.2 Sec artition size is 4992 KBytes
00:04.6 Sec :Success to erase
00:04.6 Sec artition size is 5248 KBytes
00:06.0 Sec artition size is 0 KBytes
00:06.0 Sec :Success to erase
00:06.0 Sec artition size is 2048 KBytes
00:07.2 Sec artition size is 0 KBytes
00:07.2 Sec :Success to erase
00:07.2 Sec artition size is 419968 KBytes
01:31.2 Sec artition size is 0 KBytes
01:31.2 Sec artition size is 0 KBytes
01:31.2 Sec artition size is 0 KBytes
01:31.2 Sec :Success to erase
01:31.2 Sec artition size is 128 KBytes
01:31.2 Sec artition size is 0 KBytes
01:31.4 Sec SI RAM writing start
01:31.4 Sec :Trying to communicate with IFX modem
01:36.4 Sec :Confirm IFX communication
01:36.4 Sec SI RAM writing end
01:36.4 Sec :Start PSI RAM
01:36.4 Sec :EBL writing start
01:52.6 Sec :Start EBL
01:52.7 Sec :Set capabilities to be used
01:53.7 Sec :Baudrate Change: 115200bps ===> 3000000bps
01:53.7 Sec :Set flash ID complete
01:53.7 Sec :Set Infineon CFI Information 1
01:53.7 Sec :Set Infineon CFI Information 2
01:53.7 Sec SI Download start
01:53.8 Sec :Set FLASH address
01:53.9 Sec SI Download success
01:53.9 Sec :SLB Download start
01:54.0 Sec :Set FLASH address
01:55.3 Sec :SLB Download success
01:55.4 Sec :Aeneas Download start
01:55.8 Sec :Erase was executed rightly!
01:55.8 Sec :Set FLASH address
01:58.4 Sec :Aeneas Download success
01:58.4 Sec :Code Download start
01:58.5 Sec :Erase was executed rightly!
01:58.6 Sec :Set FLASH address
03:05.0 Sec :Code Download success
03:05.0 Sec :RomBinary Download success
03:05.0 Sec :Target is resetting
03:05.0 Sec ownload complete
Click to expand...
Click to collapse
try Smartflash tool. theres a tut for that in General i think its sticky
facekill1337 said:
try Smartflash tool. theres a tut for that in General i think its sticky
Click to expand...
Click to collapse
Sorry sir , I mentioned I did use Smartflash tool but to no avail. That's why I'm asking for alternative help.
P.S : Not trying to be rude but do read.
Another similar thing to try, with stock Rom:
Here explanation: http://forum.xda-developers.com/showpost.php?p=18946763&postcount=1
and Here the firmware: http://lg-phone-firmware.com/index.php?id_mod=1
Regards
try this ? http://forum.xda-developers.com/showthread.php?p=24547773
Did you try b2c already?the lg update tool....
Sent from my LG-P970 using XDA
N00BY0815 said:
Did you try b2c already?the lg update tool....
Sent from my LG-P970 using XDA
Click to expand...
Click to collapse
Yeah. I tried B2C already. It didn't work out either.
Could you give us some background information as to how this occurred?
Have you tried adb reboot recovery > restore backup? (you didn't mention that u had tinkered with ur device)
FunkyGanja said:
Could you give us some background information as to how this occurred?
Have you tried adb reboot recovery > restore backup? (you didn't mention that u had tinkered with ur device)
Click to expand...
Click to collapse
erm. The phone keep stuck at LG logo with 4 flashing button. It occured during school time 4days ago. Whenever I press the message logo at the dock , it go into my game called Monster world ( can't remember ) Than my friend suggested me to reboot. That's where the bootloop occured. It stuck there since then. I tried SmartFlash tools and it didn't work out. Btw I root my LGP970 before already. But now it won't work. I didn't uninstall any critical apps except those games I downloaded and find it boring and deleted them away.
Have a look into my noob how to, under unbrick. Try R&D Testtool then. If it still doesnt work, try to flash another software with smartflash. Try a v10 version. If this still doesnt solve it, try a v20 version again, best would be one of sergey, cause this one reboots to recovery directly. Then you can just do a factory reset, dalvic wipe and flash a new ROM. Or restore a backup. This should definitly solve your problem If it still doesnt work, make sure you post all the logs here (use pastebin) and then we can have another look
Goodluck
Related
I have tried flash v28g with SmartFlash, but I get this error
Code:
00:00.0 Sec :Download Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec :PSI RAM writing start
00:02.0 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 Sec :PSI RAM writing end
00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:26.7 Sec :Start EBL
00:26.8 Sec :Set capabilities to be used
00:26.9 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:27.0 Sec :Set flash ID complete
00:27.6 Sec :Set Infineon CFI Information 1
00:27.7 Sec :Set Infineon CFI Information 2
00:27.7 Sec :PSI Download start
00:28.0 Sec :Set FLASH address
00:29.3 Sec :PSI Download success
00:29.3 Sec :SLB Download start
00:29.6 Sec :Set FLASH address
00:33.2 Sec :SLB Download success
00:33.2 Sec :Aeneas Download start
00:34.0 Sec :Erase was executed rightly!
00:34.4 Sec :Set FLASH address
00:40.6 Sec :Aeneas Download success
00:40.6 Sec :Code Download start
00:41.1 Sec :Erase was executed rightly!
00:41.5 Sec :Set FLASH address
02:54.5 Sec :Code Download success
02:54.6 Sec :We can't read magic number
Wrong forum. This is the Development section, your question belongs to Q&A. Just asked a moderator to move it for you.
I have tried flash v28g with SmartFlash, but I get this error
Code:
00:00.0 Sec :Download Start...
00:02.0 Sec :RomBinary Download start
00:02.0 Sec :PSI RAM writing start
00:02.0 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 Sec :PSI RAM writing end
00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:26.7 Sec :Start EBL
00:26.8 Sec :Set capabilities to be used
00:26.9 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:27.0 Sec :Set flash ID complete
00:27.6 Sec :Set Infineon CFI Information 1
00:27.7 Sec :Set Infineon CFI Information 2
00:27.7 Sec :PSI Download start
00:28.0 Sec :Set FLASH address
00:29.3 Sec :PSI Download success
00:29.3 Sec :SLB Download start
00:29.6 Sec :Set FLASH address
00:33.2 Sec :SLB Download success
00:33.2 Sec :Aeneas Download start
00:34.0 Sec :Erase was executed rightly!
00:34.4 Sec :Set FLASH address
00:40.6 Sec :Aeneas Download success
00:40.6 Sec :Code Download start
00:41.1 Sec :Erase was executed rightly!
00:41.5 Sec :Set FLASH address
02:54.5 Sec :Code Download success
02:54.6 Sec :We can't read magic number
hamedd2000 said:
I have tried flash v28g with SmartFlash, but I get this error
Click to expand...
Click to collapse
my friend,
just use this....one of the best ICS ROMs available.flash with the NVFlash method.
TOPOGIGI'S ROM
Hope it helps
I tried to flash back the stock rom, on Django X 1.4 atm, but i get an error. I've turned the phone off, pulled the battery. Holding down the vol- button, while plugging it in. Open smartflash p990. Select the 'ROM Copy D/L' tab. Ensure 'Normal Mode' is selected. Ensure 'Erase CAL' is NOT selected.
Put the fls file in first, the bin file second. It's starts flashing. Phone turns itself off, then i get an error:
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.1 Sec SI RAM writing start
00:02.1 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 Sec SI RAM writing end
00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:26.7 Sec :Start EBL
00:26.8 Sec :Set capabilities to be used
00:27.0 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:27.0 Sec :Set flash ID complete
00:27.6 Sec :Set Infineon CFI Information 1
00:27.7 Sec :Set Infineon CFI Information 2
00:27.7 Sec SI Download start
00:28.0 Sec :Set FLASH address
00:29.3 Sec SI Download success
00:29.3 Sec :SLB Download start
00:29.7 Sec :Set FLASH address
00:33.2 Sec :SLB Download success
00:33.2 Sec :Aeneas Download start
00:34.0 Sec :Erase was executed rightly!
00:34.4 Sec :Set FLASH address
00:40.6 Sec :Aeneas Download success
00:40.6 Sec :Code Download start
00:41.2 Sec :Erase was executed rightly!
00:41.6 Sec :Set FLASH address
02:55.0 Sec :Code Download success
02:55.0 Sec :Num of partitions are 7
03:05.0 Sec :Timeout error is occured
03:05.0 Sec :error!
Click to expand...
Click to collapse
After this i can just put the battery back in, and it restart with Django X 1.4 still on it. Dunno what's going wrong, maybe because i'm already on the new bootloader?
You can try a few things.
1. Just try again straight after the timeout error. Sometimes that works for me.
2. Flash the files one at a time.
3. Change the position of the files in the boxes (put the bin file in the first box and the fls file in the second).
One of those methods should allow you to smartflash successfully.
Sent from my LG-P990 using Tapatalk 2
HI,
To start with, I am French. So, I don't speak English fluently.
My LG Optimus 2x seems bricked. It was rooted. Yesterday, I tried to update my phone from Android 2.3.4 to Android 4.0.4(both official) with Smartflash. But an error occured :
00:00.0 Sec : Download Start...
00:02.0 Sec :RomBinary Download start
00:04.1 Sec SI RAM writing start
00:04.1 Sec :Trying to communicate with IFX modem
00:09.3 Sec :Confirm IFX communication
00:09.3 Sec SI RAM writing end
00:09.3 Sec :Start PSI RAM
00:09.3 Sec :EBL writing start
00:28.8 Sec :Start EBL
00:28.9 Sec :Set capabilities to be used
00:29.1 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:29.1 Sec :Set flash ID complete
00:29.7 Sec :Set Infineon CFI Information 1
00:29.8 Sec :Set Infineon CFI Information 2
00:29.8 Sec SI Download start
00:30.1 Sec :Set FLASH address
00:31.5 Sec SI Download success
00:31.5 Sec :SLB Download start
00:31.8 Sec :Set FLASH address
00:35.4 Sec :SLB Download success
00:35.4 Sec :Aeneas Download start
00:36.0 Sec :Erase was executed rightly!
00:36.2 Sec :Set FLASH address
00:42.5 Sec :Aeneas Download success
00:42.5 Sec :Code Download start
00:42.8 Sec :Erase was executed rightly!
00:43.0 Sec :Set FLASH address
02:58.6 Sec :Code Download success
02:58.7 Sec :N05:51.7 Sec artition download complete.
um of partitions are 7
03:07.8 Sec artition download complete.
03:07.9 Sec artition download complete.
03:08.4 Sec artition download complete.
03:11.0 Sec artition download complete.
03:17.8 Sec artition download complete.
06:49.5 Sec :Timeout error is occured
06:49.5 Sec :error!
Click to expand...
Click to collapse
Since this moment, when I turn on my phone, it stucks at LG logo and I can't access to CWM.
I tried to fix this problem with NvFLash, but when I run the file "flash.bat", the error is :
waiting for bootloader initialize
bootloader failed NvError 0x0
command failure : bootloader download failed.
Click to expand...
Click to collapse
How can I fix this problem ?
Thank you in advance.
Try again with Smartflash. I will link you to a post I made with a few different methods to try to bypass the timeout error-
http://forum.xda-developers.com/showthread.php?p=38840748
Hopefully that will help
Sent from my LG-P990 using Tapatalk 2
Keep flashing the AP .bin file until it is flashed successfully. Change usb ports, restart íyour computer, try on other computer. It will work after many tries
Sent from my LG-P990 using xda app-developers app
Thank you very much !
It was the .bin file that generated the error. I tried several times and now it works. It's a strange way.
hi guys i am trying to flash stock ics V30b using smartflash then i got timeout error after this
00:02.0 Sec :RomBinary Download start
00:0200:00.0 Sec ownload Start...
.0 Sec SI RAM writing start
00:02.0 Sec :Trying to communicate with IFX modem
00:07.2 Sec :Confirm IFX communication
00:07.2 Sec SI RAM writing end
00:07.2 Sec :Start PSI RAM
00:07.2 Sec :EBL writing start
00:26.7 Sec :Start EBL
00:26.8 Sec :Set capabilities to be used
00:27.0 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:27.0 Sec :Set flash ID complete
00:27.6 Sec :Set Infineon CFI Information 1
00:27.7 Sec :Set Infineon CFI Information 2
00:27.7 Sec SI Download start
00:28.0 Sec :Set FLASH address
00:29.4 Sec SI Download success
00:29.4 Sec :SLB Download start
00:29.7 Sec :Set FLASH address
00:33.3 Sec :SLB Download success
00:33.3 Sec :Aeneas Download start
00:34.1 Sec :Erase was executed rightly!
00:34.5 Sec :Set FLASH address
00:40.7 Sec :Aeneas Download success
00:40.7 Sec :Code Download start
00:41.3 Sec :Erase was executed rightly!
00:41.7 Sec :Set FLASH address
02:56.0 Sec :Code Download success
02:56.0 Sec :Num of partitions are 7
03:06.2 Sec :Timeout error is occured
03:06.2 Sec :error!
i also tried to run in compatibillty mod still no luck
anyone can help me THANNKS
are you connecting your phone directly to motherboard's usb? if not, try it.
you should also try to change the order of baseband and rom in smart flash (I mean the files), that can also help.
Sent from my LG-P990 using xda premium
Thanks i changed the order of files and flashed
anyone close this theard
Glad it worked.