[Q] bootloader - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

i have flash the stock LPF(include bootloader & otherS)
if i flash the other LPF rom now(TMT1.3 FINAL or AlBa XXLPY Full Repack v2.2 ),
do i need to flash the bootloader again?
thx!

samcp16 said:
i have flash the stock LPF(include bootloader & otherS)
if i flash the other LPF rom now(TMT1.3 FINAL or AlBa XXLPY Full Repack v2.2 ),
do i need to flash the bootloader again?
thx!
Click to expand...
Click to collapse
As it says on the OP of the Rom:
Installation:
Rom No Wipe. Flash via CWM JUST after flashing new boot http://www.multiupload.nl/PXXEHFT21J
after as always:
So i suppose that before flashing Alba you have to flash the new bootloade again.
That what i would do just to be sure!
Hope that helped bro!

Related

[Q] flashing back to stock.

hey everyone
im flashing my phone back to stock in order to flash a new custom rom (themidteam 1.1) and i must start from GB or ICS based on LP5, now, as the rom im using is not based on LP5, i have to flash back to GB and start all over agine, now, my question is, how to flash the stock rom? do i simply flash it using odin? or there are other proccess?
and is there anyway to make my ICS rom (midnote 2.0) which is based on LP1, based on LP5?
sorry for these noob questions
and thanks
Yes Odin is the way
Flash stock GB (or one of the pre rooted stock GB) using Odin, get CF Root for that ROM and then follow the flashing procedure described in the OP of tue ROM you want to flash
matius44 said:
Yes Odin is the way
Flash stock GB (or one of the pre rooted stock GB) using Odin, get CF Root for that ROM and then follow the flashing procedure described in the OP of tue ROM you want to flash
Click to expand...
Click to collapse
thank you
thats what i thought, i also read your post about restoring on ics with the abyss kernel, and i have one little question, can i flash the abyss kernel over the rooted GB? and after i flash the new ics rom, will i keep it?
thanks you agine
darkelfa2 said:
thank you
thats what i thought, i also read your post about restoring on ics with the abyss kernel, and i have one little question, can i flash the abyss kernel over the rooted GB? and after i flash the new ics rom, will i keep it?
thanks you agine
Click to expand...
Click to collapse
Yes Abyss Kernel is a GB kernel, you can flash it on rooted GB ROMs and even keep it if you like it
After you flash ICS ROM (or restore an ICS backup) Abyss kernel will be over written by the kernel provided in the ROM zip (or backup zip)

[Q] Safe To Flash Rocket Rom ver 2 ,XXPLY

hey i wanted to flash the rocket rom ics ver 2 xxply , i have rooted stock gb rom with base band version xla4, i was wondering if it was safe to flash this rom over my current rom, kindly tell, thank you
harrisfayyaz said:
hey i wanted to flash the rocket rom ics ver 2 xxply , i have rooted stock gb rom with base band version xla4, i was wondering if it was safe to flash this rom over my current rom, kindly tell, thank you
Click to expand...
Click to collapse
You are not 100% safe. However if you follow the instruction on their website, the chance that you have a problem is small.
a) coming from a rooted GB-ROM:
- download Abyss Kernel 4.2 from here: http://www.mediafire.com/?c65mndvpk6ocbaa
- put zip-file on your USB-storage
- boot in Recovery
- Flash Abyss Kernel 4.2!!!
- boot back in recovery (you find this option under 'advanced')
- FullWipe
- Flash ROM
- reboot system
- ...you are done
I flash many ICS rom using this procedure and I have no problem so far.

[Q] regarding the new bootloader

guys i was about to install AlBa DDLP8 Full Repack v2.1 but i read in instructions that i should flash the new bootloader...
i am currently on rooted cutom GB2.3.6 ....can i just flash ALBA v2.1 ( an ICS rom ) directly via CWM without the need to flash the new bootloader or it might hardbrick my device??????

[Q] My G-note got crashed, please help me...

My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
musheercmr said:
My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
Click to expand...
Click to collapse
stuck in Samsung logo just mean you need to just fullwipe factory in CMW. but be sure you are on safe kernel such as Speedmode or Hydracore before wiping.. i dont know if xxls2 kernel is brick free or not. but stucking at samsung logo has always been solved by fullwipe factory in my case
mistajoe83 said:
stuck in Samsung logo just mean you need to just fullwipe factory in CMW. but be sure you are on safe kernel such as Speedmode or Hydracore before wiping..
Click to expand...
Click to collapse
I did full wipe but still the same .
and now how can i load safe kernel? or any other advise to fix ?
thank you.
musheercmr said:
My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
Click to expand...
Click to collapse
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
rajsekhar.300 said:
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
Click to expand...
Click to collapse
that is correct. takes times. but if you waited more than 10 minutes try flashing other rom.. safest method is pc odin.
rajsekhar.300 said:
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
Click to expand...
Click to collapse
I was waiting more than a hours and i tried to Flash ICS by odin-3, that one also failed
i was in N7000DDLR9 ROM. then i flash N7000XXLS2 by mobi-odin
musheercmr said:
I did full wipe but still the same .
and now how can i load safe kernel? or any other advise to fix ?
thank you.
Click to expand...
Click to collapse
tell us how you flash it. via PC ODIN or ClockWorkMOD.?
as for the kernel if you have Extrnal sdcard then download SpeedMod 3-15 or Hydracore kernel than put that in your external Sdcard. Open CMW than flash the kernel then go to advance>reboot recovery.. wait for recovery rebooted than you are safe to flash other rom.
---------- Post added at 07:28 AM ---------- Previous post was at 07:20 AM ----------
look here.. theres a tutorial of flashing with PC ODIN + Firmware download..
the instruction is detailed and clear.. this should help you the most.
http://forum.xda-developers.com/showthread.php?t=1424997
musheercmr said:
I was waiting more than a hours and i tried to Flash ICS by odin-3, that one also failed
i was in N7000DDLR9 ROM. then i flash N7000XXLS2 by mobi-odin
Click to expand...
Click to collapse
How could you flash xxls2(jb leak) using pc odin..you need to do it using cwm
And what kernel were u on when you flashed xxls2
rajsekhar.300 said:
How could you flash xxls2(jb leak) using pc odin..you need to do it using cwm
And what kernel were u on when you flashed xxls2
Click to expand...
Click to collapse
finally i got installed ICS 4.0.4 (N7000DDLR6) by PC-Odin. thank you guys.
So from now, can you please advise, how can i flash JB (N7000XXLS2 LEAK). @ present my phone is not rooted. and running on fully stoke ROM N7000DDLR6. advise please...
musheercmr said:
finally i got installed ICS 4.0.4 (N7000DDLR6) by PC-Odin. thank you guys.
So from now, can you please advise, how can i flash JB (N7000XXLS2 LEAK). @ present my phone is not rooted. and running on fully stoke ROM N7000DDLR6. advise please...
Click to expand...
Click to collapse
First flash a safe kernel(like philz,hydracore or speedmod) and then flash the jb rom through cwm
rajsekhar.300 said:
First flash a safe kernel(like philz,hydracore or speedmod) and then flash the jb rom through cwm
Click to expand...
Click to collapse
since you flash through PC ODIN means everything is stocked. Means the brick bug is present. you now only have samsung stock recovery and not ClockWorkMod.
if you are planning to install just Samsung Stock Rom then this step is applicable here
http://techie-buzz.com/android/samsung-galaxy-note-jelly-bean-firmware-leaks.html
or
http://din.huluselangor.net/?p=21813&replytocom=5359&wpmp_switcher=mobile
if you are planning install xxls2 custom then you must first root your phone then install CMW and Flash Desired rom with safe kernel installed
look here for tutorial
http://forum.xda-developers.com/showthread.php?t=1329360
mistajoe83 said:
since you flash through PC ODIN means everything is stocked. Means the brick bug is present. you now only have samsung stock recovery and not ClockWorkMod.
if you are planning to install just Samsung Stock Rom then this step is applicable here
http://techie-buzz.com/android/samsung-galaxy-note-jelly-bean-firmware-leaks.html
or
http://din.huluselangor.net/?p=21813&replytocom=5359&wpmp_switcher=mobile
if you are planning install xxls2 custom then you must first root your phone then install CMW and Flash Desired rom with safe kernel installed
Click to expand...
Click to collapse
i tried the same as from 1st link, flashing by PC-Odin N7000XXLS2 (LEAK). but giving me FAIL! when i click start
i am using Odin 1.87, is that make any issue ?
musheercmr said:
i tried the same as from 1st link, flashing by PC-Odin N7000XXLS2 (LEAK). but giving me FAIL! when i click start
i am using Odin 1.87, is that make any issue ?
Click to expand...
Click to collapse
From where did you download the rom..it it was downloaded from sammobile or from that hotfile link,then you should flash it through pc odin
And if its a custom rom that you downloaded from the xda,then it should be flashed through cwm
the Sam mobile and the hot link are the same. youncan flash the rom using pc odin. but before that put the philz kernel xxls2 in the external sd. so that after the flash using odin, you can boot into recovery and flash that kernel and be safe and do the wipe.
nokiamodeln91 said:
the Sam mobile and the hot link are the same..
Click to expand...
Click to collapse
Yes i know..i said that just to make it clear for the op
Gents, Can you please clarify before I am going to do below. And advise if this is the proper way.
• Flash GB (2.3.6) and wipe
• Then flash ICS (4.0.4)
• Download Notecore (or Speedmod, CF root kernel) kernel and flash by PC-Odin
• Then copy N7000XXLS2 (LEAK) to SD card.
• Boot to CWM recovery, then flash from SD, restart.
Thanks.
musheercmr said:
Gents, Can you please clarify before I am going to do below. And advise if this is the proper way.
• Flash GB (2.3.6) and wipe
• Then flash ICS (4.0.4)
• Download Notecore (or Speedmod, CF root kernel) kernel and flash by PC-Odin
• Then copy N7000XXLS2 (LEAK) to SD card.
• Boot to CWM recovery, then flash from SD, restart.
Thanks.
Click to expand...
Click to collapse
All those steps are correct if you are about to flash a leaked jb rom
If its a leaked custom jb rom,then you need to flash it through cwm
[email protected]$3K#@R said:
All those steps are correct if you are about to flash a leaked jb rom
If its a leaked custom jb rom,then you need to flash it through cwm
Click to expand...
Click to collapse
still am in stuck.
now i have N7000DDLR9 (ICS 4.0.4) without root. then i tried to flash N7000XXLS2 (LEAK) by PC-Odin, i am getting failed.
can you please explain step by step, how do from N7000DDLR9 (without root)
thanks.
musheercmr said:
still am in stuck.
now i have N7000DDLR9 (ICS 4.0.4) without root. then i tried to flash N7000XXLS2 (LEAK) by PC-Odin, i am getting failed.
can you please explain step by step, how do from N7000DDLR9 (without root)
thanks.
Click to expand...
Click to collapse
What was the error you got in the pc odin
paste the odin logs that show failed

Need some clarification , hardbrickbug JB?

Hi. I am new into flashing in Android and considering of flashing to another rom , sweet rom to be exact. But there's this hard brick bug that is preventing me to do so. I am currently on Stock Jelly bean and it's too laggy , that's the reason why i wanted to flash to another Rom.
Anyway , is the JB kernel still not safe? As shown in the thread of sweet rom , it states there i would just have to flash my current stock kernel to Philz JB Kernel , to proceed into wipe. Some of the instructions are so foreign to me. Is the risk there? Also , i tried Chainfire's gotbrickbug app and it states i do have. That's why i am afraid into further flashing before i get some more information since i am still a newbie!
Thanks in advance bros!
hi,
asfar as i know you just have to flash a safe kernel
(i prefer K5-5: http://forum.xda-developers.com/showthread.php?t=2181599 - touristinparadise.blogspot.de/2013/03/samsung-galaxy-note-jb-download.html) trough odin.
after flashing you have the CWM, from there you can flash every ROM you want
I rooted on ICS 4.0.4 with CWM.zip x) not recommended because the kernel isnt safe (?), but it worked for me
mindfck1337 said:
hi,
asfar as i know you just have to flash a safe kernel
(i prefer K5-5: http://forum.xda-developers.com/showthread.php?t=2181599 - touristinparadise.blogspot.de/2013/03/samsung-galaxy-note-jb-download.html) trough odin.
after flashing you have the CWM, from there you can flash every ROM you want
I rooted on ICS 4.0.4 with CWM.zip x) not recommended because the kernel isnt safe (?), but it worked for me
Click to expand...
Click to collapse
Hmm , SweetROM instructions states to flash Philz JB kernel before wiping and then flashing? Sorry man , i'm quite a bit confused!
you can flash any safe kernel first,, philz or speedmod or hydracore.. as when you install the new rom.. it will replace the kernel with its own

Categories

Resources