Database Develop

[Q] bootloader

i have flash the stock LPF(include bootloader & otherS)
if i flash the other LPF rom now(TMT1.3 FINAL or AlBa XXLPY Full Repack v2.2 ),
do i need to flash the bootloader again?
thx!

samcp16 said:
i have flash the stock LPF(include bootloader & otherS)
if i flash the other LPF rom now(TMT1.3 FINAL or AlBa XXLPY Full Repack v2.2 ),
do i need to flash the bootloader again?
thx!
Click to expand...
Click to collapse
As it says on the OP of the Rom:
Installation:
Rom No Wipe. Flash via CWM JUST after flashing new boot http://www.multiupload.nl/PXXEHFT21J
after as always:
So i suppose that before flashing Alba you have to flash the new bootloade again.
That what i would do just to be sure!
Hope that helped bro!

custom ics to custom gb

hello guys ... i need a help to flash this rom ... but situation is.....
first i am with stock 2.3.6 and then ota updated to ics ... then rooted and by mobile odin i used to flash speedmood kernal ...
so i am with ics ...then i flashed a ics custom rom by using abyss kernal...
now i am with custom ics firmware... so can i flash this gb custom rom ???
if yes how ??? like again using abyss kernal...full wipe and flash any custom gb rom ?
switcing from custom ics to gb will give problem

Which ICS custom ROM are you on?
You can use PC Odin to go back to Gingerbread and then root it and flash a custom GB rom.
Or you can flash Abyss and then reboot recovery and flash a gingerbread custom rom. If you aren't on a stock ICS rom, you can probably just flash gingerbread rom from CWM (like if you are using CM9, franco kernel, or speedmod kernel).

andreww88 said:
Which ICS custom ROM are you on?
You can use PC Odin to go back to Gingerbread and then root it and flash a custom GB rom.
Or you can flash Abyss and then reboot recovery and flash a gingerbread custom rom. If you aren't on a stock ICS rom, you can probably just flash gingerbread rom from CWM (like if you are using CM9, franco kernel, or speedmod kernel).
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1665208 I am this charks. Ics rom so I can flash abbys kernal and reboot recovery and flash gb custom rom right?

rahmaneee said:
http://forum.xda-developers.com/showthread.php?t=1665208 I am this charks. Ics rom so I can flash abbys kernal and reboot recovery and flash gb custom rom right?
Click to expand...
Click to collapse
This rom uses an unsafe kernel but for now there is no evidence that a kernel flash can hardbrick the phone. However, I think it's safer flash a secure one (like last speedmod or franco's which should be safe) with odin or mobile odin (extract the .zip until you have te zimage, then flash it), then flash a GB rom.
Otherwise, you can still flash a GB stock rom DIRECTLY ROOTABLE with odin (or MO), then obtain root + cwm and finally flash a gb custom rom with cwm safely.

Gingerbread custom ROMs
Hello Friends, I have asked this question before in another thread but unfortunately there have been no responses.
What are the various Gingerbread custom ROMs available for the Samsung Galaxy Note GT-N7000? CyanogenMod 7 is based on Gingerbread but unfortunately the Galaxy Note is not officially supported.
I am presently on stock Gingerbread and I will be rooting my device in the coming few days. Having played around with stock Gingerbread, I would like to do the same with custom Gingerbread firmwares.
One more query, considering my current Android version is 2.3.6, am I subjected to using a custom ROM which is 2.3.6 or am I free to use any 2.3.x based?
I humbly request you all to respond to these queries of mine. Awaiting your apt replies.

[q] going back to gb from lp9

is it safe to go back to gb im now on ics 4.0.3 malaysia verision unrooted
is it safe to install the new rocketrom ?!
could u tell me the ways ?

Yes - follow the instructions on Rocket ROM thread - do a fullwipe and it will work. Install Abyssnote 4.2 or 3.9 as instructed. The big thing to remember is to reboot into recovery from the Advanced settings when you flash Abyssnote.

Question about EXACTLY process to flash roms

First of all, HI guys and sorry for my irregular english.
I read since a long time XDA Forums to prepare me in flash and root methods for my galaxy note.
At now, i'm using this stock rom:
[ICS][4.0.3][Stock][OpenGermany]N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5
+
CF-Root-SGN_XX_OXA_LPY-v5.6-CWM5.tar + SuperSU
but i came from a stock rom: N7000UBKK2 with default kernel KK1 from Samsung and Movistar. and i have only a nandroid backup of my default Samsung/Movistar rom.
I have another gingerbread samsung stock rom, for emergency cases:
N7000UBKK8_N7000WEKK1_N7000PETKK1_HOME.tar.md5
But my point is:
I wish test some roms, before to decide which one use in dual boot system:
- Stock 4.0.4 (LRG or you suggest me LRK or another more recent ?)
- AOKP
- Criskelo
- Chrack
- Paranoid
- Cyanogen 9
And i have ready to use: Odin 1.87, Odin Mobile, SuperSU (if is necesary), Abyss 4.2 (CW/Red) for recovery, Abyss 4.2 CW for odin and CF-Root for LRG (if is necesary i can find one for LRK or another recent)
But i'm confused about how exactly do that. Yes i know there are many... MANY topics about that but, I only need a bit of help guys to understand the exactly process and avoid EMMC BUG...
If i understant correctly, i must follow this method, please correct me if i'm grong:
01 - Check if i'm root and settings are in depuration + unkown sources
02 - Because i'm using an ICS Kernel i need first downgrade to Abyss for continue
03 - Reboot in Recovery and flash Abyss4.2 CW/Red, after "reboot recovery" and make wipes
Which one should i use for this CW or Red Version?
...
But after this i have problems, because i have ever red: before flash a custom rom you need a same base. Then ok i think for use for example CM9, or Paranoid, or Criskelo, I need a 4.0.4 rom then i have a:
[ICS][4.0.4][Stock][OpenGermany]N7000XXLRG_N7000DBTLRG_N7000XXLRB_HOME.tar.md5
Ready to flash but...
If a this moment following the previous steps, i'm in recovery of Abyss CW/Red:
Should i reboot using this Abyss kernel in download mode to flash a stock LRG ?
...
Or in another reality, is not needed flash Abyss to flash a stock rom using Odin ?
I wish first test the Stock 4.0.4 before any other custom to make a base point of comparison
...
And after, using 4.0.4 LRG + CF-Root, is safe use install from zip file in recovery to flash any other rom like CM9 for example ? or i need use abyss recovery (before flash it using CR-Root recovery) to flash any other rom (ICS) ?
Again i hope you can help me with these questions, and really sorry is the text is so long but i prefeer to know rightly how to procced before brick my phone, because i still waiting for a JIG (you know, for emergency...)
Tnks to all.

First of All You need to know that there is no need for the same base to flash the ROM.
Second thing You have to use Abyss Redpill 4.2 Original Logo Recovery(It uses GB Kernel) If you are not going to downgrade to GB and want to flash on top of your current ROM
Third Whenever you want to flash CM9/AOKP/AOSP first downgrade to GB(Pre rooted Rom) OR GB then Root it and then flash the rom by going it to CWM recovery.
Fourth thing is Never flash Abyss using PC Odin.
Proper Way to Flash CM9/AOSP/AOKP for a clean install (You will lose data)
Download a prerooted GB Rom from here ===> http://forum.xda-developers.com/showthread.php?t=1424997
Reboot your phone is Download Mode. (Vol Down+Home+Power)
Open Pc Odin on your Pc/Laptop
Connect your phone to PC via USB Cable
A Small Box in Left Upper turns Yellow.It means your phone is recognized by Odin
Now Select GB File under PDA Tab (Do not change any settings)
Start Flash
YOU WILL HAVE A GB ROM ON YOUR PHONE WITH ROOT
Now Go to Recovery
Install Zip from SD Card
Flash Rom
Flash Gapps
Do All 3 Wipes (Cache/Dalvik/Data)
Reboot System.

you might wanna root first and backup efs before jumping to any rom that is different csc then you previous one.
Sent from my GT-N7000 using Tapatalk 2

Tnks to all, at now i'm testing some roms and kernels, looking for a "perfect" mate for my paranoid android (tableted rom), and in my tests i still looking for a decent kernel because (may this is my imagination but...) CF-Root LRG kernel in LRK Rom (Chrack's Rom) consume excessively batery but i will test in an ordinary day because may is not problem from rom, this should be a problem from kernel...
I read before: SpeedMod kernel was developed just for this situation: low batery comsumption + high perfomance...

Need some clarification , hardbrickbug JB?

Hi. I am new into flashing in Android and considering of flashing to another rom , sweet rom to be exact. But there's this hard brick bug that is preventing me to do so. I am currently on Stock Jelly bean and it's too laggy , that's the reason why i wanted to flash to another Rom.
Anyway , is the JB kernel still not safe? As shown in the thread of sweet rom , it states there i would just have to flash my current stock kernel to Philz JB Kernel , to proceed into wipe. Some of the instructions are so foreign to me. Is the risk there? Also , i tried Chainfire's gotbrickbug app and it states i do have. That's why i am afraid into further flashing before i get some more information since i am still a newbie!
Thanks in advance bros!

hi,
asfar as i know you just have to flash a safe kernel
(i prefer K5-5: http://forum.xda-developers.com/showthread.php?t=2181599 - touristinparadise.blogspot.de/2013/03/samsung-galaxy-note-jb-download.html) trough odin.
after flashing you have the CWM, from there you can flash every ROM you want
I rooted on ICS 4.0.4 with CWM.zip x) not recommended because the kernel isnt safe (?), but it worked for me

mindfck1337 said:
hi,
asfar as i know you just have to flash a safe kernel
(i prefer K5-5: http://forum.xda-developers.com/showthread.php?t=2181599 - touristinparadise.blogspot.de/2013/03/samsung-galaxy-note-jb-download.html) trough odin.
after flashing you have the CWM, from there you can flash every ROM you want
I rooted on ICS 4.0.4 with CWM.zip x) not recommended because the kernel isnt safe (?), but it worked for me
Click to expand...
Click to collapse
Hmm , SweetROM instructions states to flash Philz JB kernel before wiping and then flashing? Sorry man , i'm quite a bit confused!

you can flash any safe kernel first,, philz or speedmod or hydracore.. as when you install the new rom.. it will replace the kernel with its own