CRT Off animation for stock FC09 - Epic 4G Themes

Since I couldn't find a CRT off animation for stock FC09, I decided to make it and share!
Flashing with ClockworkMod 5.0.2.7. I've only installed this on my own stock / MTD / FC09 Epic 4G (it should work on BML roms as well, but I haven't tested) - it works for me. Make a nandroid backup just in case, and wipe your Dalvik cache before flashing, but this should work on odexed and deodexed roms just fine. If it works for you, be sure to push the Thanks button, Thanks!

Just fyi...this mod hangs my phone after flash..running tpr 2.2 mtd and nashs neon viper theme...some sort of conflict...sigh...
Sent via a non-cancer forming method of electromagnetic radiation.

Naddict said:
Just fyi...this mod hangs my phone after flash..running tpr 2.2 mtd and nashs neon viper theme...some sort of conflict...sigh...
Sent via a non-cancer forming method of electromagnetic radiation.
Click to expand...
Click to collapse
It mods framework-res
Sent from my SPH-D700 using Tapatalk 2

Naddict said:
Just fyi...this mod hangs my phone after flash..running tpr 2.2 mtd and nashs neon viper theme...some sort of conflict...sigh...
Sent via a non-cancer forming method of electromagnetic radiation.
Click to expand...
Click to collapse
Don't need this mod for your setup. You may have set window and transition animations to fast in spare parts. To avoid defeating the built-in CRT-Off animation, set your "Window Animations" to "Normal". You can still have speed of transitions with "Transition Animations" set to "Fast".
This mod will also change themes' icons if they don't match and for that reason, this mod should be considered a theme. I'd suggest using it for stock-only; I can't think of a custom ROM or Theme for epic that doesn't have CRT-Off animation.

samep said:
Don't need this mod for your setup. You may have set window and transition animations to fast in spare parts. To avoid defeating the built-in CRT-Off animation, set your "Window Animations" to "Normal". You can still have speed of transitions with "Transition Animations" set to "Fast".
This mod will also change themes' icons if they don't match and for that reason, this mod should be considered a theme. I'd suggest using it for stock-only; I can't think of a custom ROM or Theme for epic that doesn't have CRT-Off animation.
Click to expand...
Click to collapse
It's Nashdogg's fault he made the neon viper theme and I bet its not in there. Love the theme too much to leave it.
Nash..any chance? Love you man! :fingers-crossed:

Naddict said:
It's Nashdogg's fault he made the neon viper theme and I bet its not in there. Love the theme too much to leave it.
Nash..any chance? Love you man! :fingers-crossed:
Click to expand...
Click to collapse
I'm pretty sure the neon theme has CRT off, it may not have CRT on but that wouldn't be too hard to make happen.
Sent from my SPH-D700 using Xparent ICS Tapatalk 2

Nashdogg said:
I'm pretty sure the neon theme has CRT off, it may not have CRT on but that wouldn't be too hard to make happen.
Sent from my SPH-D700 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
No, if off is there, that is cool, must be my spare parts transition speed...if that isn't the culprit. I will most certainly be a pest!
:laugh:

Naddict said:
No, if off is there, that is cool, must be my spare parts transition speed...if that isn't the culprit. I will most certainly be a pest!
:laugh:
Click to expand...
Click to collapse
Can always count on you naddict
Sent from my SPH-D700 using XDA

samep said:
Don't need this mod for your setup. You may have set window and transition animations to fast in spare parts. To avoid defeating the built-in CRT-Off animation, set your "Window Animations" to "Normal". You can still have speed of transitions with "Transition Animations" set to "Fast".
This mod will also change themes' icons if they don't match and for that reason, this mod should be considered a theme. I'd suggest using it for stock-only; I can't think of a custom ROM or Theme for epic that doesn't have CRT-Off animation.
Click to expand...
Click to collapse
This. I run straight up stock, so that's why I end up making this mod at just about every release. Only those few of us who haven't received our 32GB Galaxy S IIIs and still use our Epic 4Gs on stock as daily drivers should apply, heh.

ss4rob said:
Since I couldn't find a CRT off animation for stock FC09, I decided to make it and share!
Flashing with ClockworkMod 5.0.2.7. I've only installed this on my own stock / MTD / FC09 Epic 4G (it should work on BML roms as well, but I haven't tested) - it works for me. Make a nandroid backup just in case, and wipe your Dalvik cache before flashing, but this should work on odexed and deodexed roms just fine. If it works for you, be sure to push the Thanks button, Thanks!
Click to expand...
Click to collapse
Can you make this deodexed? I'm running Kennyglass' FC09 MTD prerooted Deodexed and every time I flash this, I get stuck in a boot loop. I wipe cache partition and Dalvik, and Spare Parts says my animations are set to Normal. Help! want this animation!

rando991 said:
Can you make this deodexed? I'm running Kennyglass' FC09 MTD prerooted Deodexed and every time I flash this, I get stuck in a boot loop. I wipe cache partition and Dalvik, and Spare Parts says my animations are set to Normal. Help! want this animation!
Click to expand...
Click to collapse
This is the FC09 CRT on.zip it will give you CRT on and off. Pretty cool. A big thanks to travmofosho for putting this together. I used this in a lot of my themes.
So here's how to apply it. Boot into recovery and wipe cache and dalvik cache. Go to mounts and storage and mount system. It will say " unmount system when its mounted. Then flash this zip and reboot...enjoy
FC09 CRT ON.zip - http://db.tt/0f1SMOlE
Sent from my SPH-D700 using Xparent SkyBlue Tapatalk 2

Nashdogg said:
This is the FC09 CRT on.zip it will give you CRT on and off. Pretty cool. A big thanks to travmofosho for putting this together. I used this in a lot of my themes.
So here's how to apply it. Boot into recovery and wipe cache and dalvik cache. Go to mounts and storage and mount system. It will say " unmount system when its mounted. Then flash this zip and reboot...enjoy
FC09 CRT ON.zip - http://db.tt/0f1SMOlE
Sent from my SPH-D700 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
NOPE! I'm on Kennyglass' Deodexed Prerooted FC09MTD with Kernel 2.6.35.7-Shadow-FC09-MTD_v1.0.1, FC09 modem. It doesn't stick me in a bootloop, but it doesn't seem to work. I did mount system in CWM before flashing each time. I even tried flashing an MTD FC09 stock kernel, but it still does not do the CRT effect. What could be the problem? I like the effect in CM10 and TPR but with the MTD FC09's Voodoo color application, I get a green flash when I turn off my screen that I don't get with the CRT off. I know I can go to default 2.3.3 color in Voodoo, but that looks washed out. I'd like the CRT off on this ROM.

Related

[BOOT] Android Swirl Boot *updated 12/30/10*

Update: added straight logo animation as requested by tyl3rdurden
Just thought I'd toss this out there. One of the animations I made while learning some new programs and am currently using myself. The panning lights will continue until your phone boots. It should work on any of the DK28 based ROMs that use Mammon's kernel or a variation thereof for custom animations.
There is a funky sound that comes along with it that I mangled from the wonderful site www.freesound.org under the CC Sampling Plus 1.0 license
The .zip is flashable through CWM and as usual I'm not responsible if this jacks up your phone in any way.
Preview Slanted Logo
Preview Straight Logo
Android Swirl - Slanted Logo
Android Swirl - Straight Logo
Enjoy and have a happy new year, everyone!
Very very nice. I'm really diggin it!!! Thanks for sharing!
Edit: for those whom are curious, this will work fine with ext4
Sent from my SPH-D700 using XDA App
I think its amazing and not to be nit picky but could you possibly make a version with the android logo straight/forward and not tilted to the back? Thanks!
tyl3rdurden said:
I think its amazing and not to be nit picky but could you possibly make a version with the android logo straight/forward and not tilted to the back? Thanks!
Click to expand...
Click to collapse
Sure can. Shouldn't be too hard to change, I'll get that up later this afternoon.
I like it, nice job!
Awesome job, thanks for sharing!
Perfect Thanks for the hard work!
I think I will add this to my midNIGHT ROM if you don't mind and then link back here to give you full credit.....
ptfdmedic said:
I think I will add this to my midNIGHT ROM if you don't mind and then link back here to give you full credit.....
Click to expand...
Click to collapse
That sounds great! Thanks!
Sent from my SPH-D700 using XDA App
Any way to get this working for EB-13 and ext4?
it works but when it starts up it looks like my old bootani plus the new bootani are mixed together is there a way to fix this? i am running on the new genocide kernel
Weird, mine started popping up FCs
mvelasquez21 said:
it works but when it starts up it looks like my old bootani plus the new bootani are mixed together is there a way to fix this? i am running on the new genocide kernel
Click to expand...
Click to collapse
I had the same problem, and here's how I resolved it
dreamsforgotten said:
You should back up and delete the stock sprint animations out of your system folder. The new boot animation is called bootanimation.zip. The stock is .qmi or something like that.
Click to expand...
Click to collapse
Of course, the "stock sprint animations" were for my case, I believe you need to delete the one you no longer need. Backup and give it a try!
Anyway to get this for EB13?
LOOKS
Looks good...
not lettin me install the zip in cwm3. comes up with an installation aborted message. "amend scripting is no longer supported...please switch to edify scripting."
i really like the animation, good job on it. just not sure how to get it goin for me
running cwm3 (ext4) eb13 with bonzai
crowmallet said:
not lettin me install the zip in cwm3. comes up with an installation aborted message. "amend scripting is no longer supported...please switch to edify scripting."
i really like the animation, good job on it. just not sure how to get it goin for me
running cwm3 (ext4) eb13 with bonzai
Click to expand...
Click to collapse
Get one of the CWM3 boot amimations flashable zip from the supernova thread. Download these animations. Replace the bootanimation.zip in the CWM3 with the one in these files.
You just flash this, correct?
had this when i was on midnight rom. awesome boot animation!
Any way to get this as a shut down animation?

[Bootanimation] Sydicate Shutdown in reverse

I wanted to try something small as a just got in to modding a few days ago but unfortunately I still needed some help. Thanks to qbking77 & jkrough0728 for all your assistance in making this noobs day!
Just to give a little back here it is for any of you that would like it. Before you ask no it doesn't include the sound. Install it with the copy/paste method (not flashable)
Edit - Make sure you push it using root explorer, I tried others like file explorer and such and it didn't take.
Syndicatebootup.zip is the flashable version for those that would like that better. Thanks qbking77!
Awesome!!! Trying now
Good work!
Sent from my SPH-D700 using XDA App
Well done buddy!
Is this different than the one I already have?
Cool man, thanks for this. I was going to do it but looks like you beat me to the punch lol. Keep it up.
Posted by some phone named the Epic.
Isn't the syndicate shutdown animation the original samsung shutdown? I'm confused here...
Sent from my Epix 4G using XDA
Its close to it, but the next thing to add is a blue pulse either under all graphcs and text or just the "s". Just learning how to use after effects to animate and render a .png sequence for me and modifying the desc to make it loop till the phone boots.
The Root said:
Is this different than the one I already have?
Click to expand...
Click to collapse
Have no idea, that's why I put it out. Didn't see anything like it. Maybe I need to better my search skills
The syndicate animation says syndicaterom.. that's the difference
Flashed this, nice work, this should be the stock srf boot ani
Sent from my SPH-D700
Attached is a flashable zip through clockwork! Just did this for Mezz
Enjoy!
DrKaotica said:
The syndicate animation says syndicaterom.. that's the difference
Flashed this, nice work, this should be the stock srf boot ani
Sent from my SPH-D700
Click to expand...
Click to collapse
I actually edited my srf 1.2 to include this when flashing. So technically this is my stock boot ani. Still working on a blue pulsing background for it in adobe after effects. I will modify the OP when done.
I'm digging it, nice clean boot up and matches the shutdown animation well on srf1.2
Sent from my SPH-D700 using Tapatalk
I'm not sure why you guys did this, when I've posted the original SyndicateROM animation that matches the shutdown several times... I'm responsible for the S + text, and the loop is thanks to Pseudoremora.
The loop is nice, if you ask me. I'm using this animation right now.
Mezz101 said:
Have no idea, that's why I put it out. Didn't see anything like it. Maybe I need to better my search skills
Click to expand...
Click to collapse
I put it out there already, my bad.....

[MOD][EG22][odexed] CRT Off ONLY!!!!

OK, this is the first time I've edited an apk file, but I'm running it on my phone with no problems. I'm using odexed "stock" EG22. Your Mileage May Vary! If you are running EG22 you've already voided your warranty so don't blame me if your phone bursts into flames. So far only one person has tested this (me) but it's a pretty basic edit and what could possibly go wrong!
I took the CRT/Battery mod that was posted by Tortel1210 (thanks) and replaced the framework in it with a stock EG22 framework that has had one line edited in it to enable CRT animation. Thanks to kennethpenn in the Atrix forum for instructions on how and what to edit. For those interested, here's the instructions I followed:
http://forum.xda-developers.com/showthread.php?t=1138800
Here's the installer I created. Install using CWM.
http://hotfile.com/dl/125082870/ab0f039/eg22CRT.zip.html
EDIT:
Just a heads up here. Apparently enabling the CRT Off animation causes the automatic screen brightness function to work incorrectly; it jumps from full dim to full bright instead of continuously varying. From what I've read this is a gingerbread bug that occurs on all phones. I've confirmed that it happens with this mod.
2nd time 1st!!!...nice job BTW!Went back to EF02 but a few more of these and off to EG22 I go, thanks!
Anybody working on a port for the screen "on" animtion or the overscroll glow..its just aother file in the same framework package isn't it (CRT screen on)...if it is...then I'm hoping those instructions can allow the screen on as well.
Sent from my rooted, suited, & booted Epic 4G kno dat!
No its not, we dont have the libs even present for crt on..
chris41g said:
No its not, we dont have the libs even present for crt on..
Click to expand...
Click to collapse
Ok thanks I had a misunderstanding of the concept...can they be ported from another ASOP Gingerbread ROM or ported over like some of our devs have done with porting themes?
Sent from my rooted, suited, & booted Epic 4G kno dat!
I don't intend to be pushy...but I just get jealous when I see other GB ROM's on other phones that aren't CM7...with features that we don't have...
Sent from my rooted, suited, & booted Epic 4G kno dat!
tony45x220 said:
Anybody working on a port for the screen "on" animtion or the overscroll glow..its just aother file in the same framework package isn't it (CRT screen on)...if it is...then I'm hoping those instructions can allow the screen on as well.
Sent from my rooted, suited, & booted Epic 4G kno dat!
Click to expand...
Click to collapse
As I understand it, the overscroll glow requires quite a bit of modifications as does the CRT ON. I also think enabling them requires a deodexed rom.
CRT OFF is built into the existing framework and can be enabled by just changing one parameter and recompiling, which is what I did. I'm not a developer but I'm pretty good at following other people's instructions, so I was able to put this together pretty easily. It'll take an actual developer to add the other stuff.
poit said:
As I understand it, the overscroll glow requires quite a bit of modifications as does the CRT ON. I also think enabling them requires a deodexed rom.
CRT OFF is built into the existing framework and can be enabled by just changing one parameter and recompiling, which is what I did. I'm not a developer but I'm pretty good at following other people's instructions, so I was able to put this together pretty easily. It'll take an actual developer to add the other stuff.
Click to expand...
Click to collapse
I got chu....maybe it will happen once we get some GB source code and get CM7 working for the epic...from my knowledge once you have the feature compatable with the hardware of the phone on one ROM...it should be an asy transition btwn different ROM's for the same phone...thanks for clarifying though.
Sent from my rooted, suited, & booted Epic 4G kno dat!
Just a heads up here. Apparently enabling the CRT Off animation causes the automatic screen brightness function to work incorrectly; it jumps from full dim to full bright instead of continuously varying. It appears that this is a gingerbread bug that occurs on all phones. I've confirmed that it happens with this mod.
Deodexed ROM
This may be obvious from the title of the thread, but is this compatible with the deodexed ROM?
If not, can you give me any advice on how to make this for the deodexed ROM?
Gersonian said:
This may be obvious from the title of the thread, but is this compatible with the deodexed ROM?
If not, can you give me any advice on how to make this for the deodexed ROM?
Click to expand...
Click to collapse
I haven't tested it on deodexed, but I think it will work. If you backup in CWM before you install it and it doesn't work you can recover by just "advanced restoring" system in CWM. You could be the guinea pig!
poit said:
I haven't tested it on deodexed, but I think it will work. If you backup in CWM before you install it and it doesn't work you can recover by just "advanced restoring" system in CWM. You could be the guinea pig!
Click to expand...
Click to collapse
It works on deodexed
Thanks for the info. I see that there is now a thread on deodexed overscroll and crt off, but for me since installing the overscroll works, but not crt. I migjt try this one soon.
Sent from my SPH-D700 using XDA App

[CM7.1 LOCK] Ice Cream Sandwich Ring Lock MOD [12/10/11]

This is a Mod of the CM7.1 Ring Lock that I made using some images from the ICS SDK.
NOTE: Before you flash you need to make sure you have the Ring Lock available in your CM7.1 Rom, by going to Menu, CyanogenMod Settings, Lockscreen, Style Options, Lockscreen Style.
Just flash in recovery and you should be good to go.
Use Metamorph or zipthemer to apply the morphs.
Flash at your own risk make a backup before you continue.​
---------------------------------------------------------------------
Changelog:
12/10/11
Added smaller rings plus bigger icons should now look pretty close to the real deal. The changes were made to the following files: "ICS_Lock_CM7.1-signed.zip and Morph" and "ICS_Lock_Framework_CM7.1_Nightly_HDPI_Only.zip"
Updated screenshot, the one on the right represents the files above mentioned.
11/15/11
Updated the file "ICS_Lock_Framework_CM7.1_Nightly_HDPI_Only.zip" to work with the new nightly's. This is for the people who can't get the morphs or recovery patcher to work. As stated before this will replace your framework-res.apk completely.
It is confirmed that the current morphs and recovery patchers work with the new singe Ring unlock option.
11/02/11
Fixed all invalid Morph files.
10/31/11
Added an HDPI version for the latest CM Nightly's. "ICS_Lock_Framework_CM7_Nightly_HDPI_Only"
This will replace your framework-res.apk completely, so make a backup.
10/30/11
Fixed the error in "ICS_Lock_CM7.1_Morph.zip"
10/29/11
Added a big ring version for people who preferred the bigger default Rings.
Added a version where the selected ring is bigger to look more like the default ICS lockscreen.
Added a white lock version of a merged framework from Sonnysekhon ICS Morph with the bigger selected rings HDPI only.
10/26/11
Made default Rings a little smaller.
Added White, Green, and Blue Rings "Flash in recovery only"
Added "ICS_Framework_CM7.1_HDPI_Only-signed.zip" which is my White Rings with Blue Pressed Ring Lock Mod and Sonnysekhon's ICS framework merged into one flashable zip.
10/24/11
Changed vibrate icon to an actual vibrate icon. Thanks "tyler1234567"
10/23/11
Added Morphs for people who can not get the flashables working.
Use Metamorph or zipthemer to apply.
10/21/11
Should now work in landscape..need testers.
No longer have yellow selected ring when set on vibrate.
Signed the zip files for less error in flashing.
10/20/11
Initial release
Choose between Green, White, or Blue pressed Rings.
Giving Credits to:
tyler1234567 for the vibrate icon.
SonnySekhon for the ICS framework.
What file is which:
ICS_Lock_CM7.1_BlueRing-signed.zip: Blue Rings
ICS_Lock_CM7.1_GreenRing-signed.zip: Green Rings
ICS_Lock_CM7.1_BluePressed-signed.zip and Morph: White Rings With Blue Highlight
ICS_Lock_CM7.1_GreenPressed-signed.zip and Morph: White Rings With Green Highlight
ICS_Lock_CM7.1_WhitePressed-signed.zip and Morph: White Rings With White Highlight
ICS_Lock_CM7.1-signed.zip and Morph: Ice Cream Sandwich like lockscreen.
ICS_Lock_Big_Rings_CM7.1-signed.zip: Big White Default and Selected Rings.
ICS_Lock_Framework_CM7.1_Nightly_HDPI_Only: Ice Cream Sandwich like lockscreen plus Sonnysekhon's ICS framework. [Will replace your framework-res.apk completely so make a backup.]
If you want to have the Ice Cream Sandwich sounds, you can go to my other thread here.
Looks great on mdpi only thing i would change is the highlight color from green to blue
Sent from my ADR6300 using XDA App
v0te4ryan said:
Looks great on mdpi only thing i would change is the highlight color from green to blue
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
+1
Or just keep it white. =)
Yeah in white will look bomb!! thanks
DameonAndMeagan said:
This is a Mod of the CM7.1 Ring Lock that I made using some images from the ICS SDK. I only have tested it on HDPI but it should work on MDPI and LDPI also.
Just flash in recovery and you should be good to go.
Flash at your own risk make a backup before you continue.
Let me know if there is any problems.
Here is a screenshot:
Click to expand...
Click to collapse
What am I doing wrong? flashed in recovery twice, both times I am still getting original LS. Do I need to disable something or wipe DK?
What is in the "zip" file in the patch directory and how can i open it?
I have always preferred the sliding tabs, even after CM7 introduced the circles. However, this is a really slick implementation with the ICS graphics. I will be using this as my default for sure. Thanks for posting.
ctfrommn said:
What am I doing wrong? flashed in recovery twice, both times I am still getting original LS. Do I need to disable something or wipe DK?
Click to expand...
Click to collapse
I assume you are using CM7.1 If so you need to go into the lockscreen settings and select the Ring Style for the lockscreen.
how come i dont have the circle in the middle. i only have it on the left and the right
solarus2011 said:
I have always preferred the sliding tabs, even after CM7 introduced the circles. However, this is a really slick implementation with the ICS graphics. I will be using this as my default for sure. Thanks for posting.
I assume you are using CM7.1 If so you need to go into the lockscreen settings and select the Ring Style for the lockscreen.
Click to expand...
Click to collapse
I am on nightly 227 and I already was using ring. I tried switching to something else and the back and I still get the default cm ring lockscreen.
ctfrommn said:
What am I doing wrong? flashed in recovery twice, both times I am still getting original LS. Do I need to disable something or wipe DK?
Click to expand...
Click to collapse
what recovery are you using to flash??
@DameonAndMeagan This is awesome and beautiful. Thank you! Looks awesome on my Defy.
Edit: I see you've updated to include different colors for the pressed icons. Should have held off on installing this for another 5 minutes I guess.
phillip_viado said:
how come i dont have the circle in the middle. i only have it on the left and the right
Click to expand...
Click to collapse
because you need to have custom app starter selected in the lockscreen style setting and choose your applications. Select Custom application and click add on the popup and select up to 4 applications
Screen shot from each one will ce nice
xplosi said:
Screen shot from each one will ce nice
Click to expand...
Click to collapse
well it is the same white rings you can just choose to have another color to show up when you press them
DameonAndMeagan said:
what recovery are you using to flash??
Click to expand...
Click to collapse
4EXT...based on CWM
ctfrommn said:
4EXT...based on CWM
Click to expand...
Click to collapse
im not familiar with that one. The zip file isn't signed so maybe you need to enable unsigned zip files
tlongren said:
@DameonAndMeagan This is awesome and beautiful. Thank you! Looks awesome on my Defy.
Edit: I see you've updated to include different colors for the pressed icons. Should have held off on installing this for another 5 minutes I guess.
Click to expand...
Click to collapse
your welcome my friend!
DameonAndMeagan said:
im not familiar with that one. The zip file isn't signed so maybe you need to enable unsigned zip files
Click to expand...
Click to collapse
If you like CWM, 4EXT is awesome, many more abilities and I have yet to have a n issue with it yet. I will try flashing a CWM recovery and try that.
Update.....flashed CWM and still no go. Not sure what I am doing that no one else is. It seems pretty straight forward.
I flashed it in recovery. Now I go to CM7 lockscreen settings and the ring mode doesn't even appear in the style popup..
ctfrommn said:
If you like CWM, 4EXT is awesome, many more abilities and I have yet to have a n issue with it yet. I will try flashing a CWM recovery and try that.
Update.....flashed CWM and still no go. Not sure what I am doing that no one else is. It seems pretty straight forward.
Click to expand...
Click to collapse
try going rebooting into CWM recovery and going to "install zip from sd card, and select toggle signature verification and then flash the zip. Let me know if that works

ICS Animations on every rom!

We can have ICS animations on any of our roms!
It is described in this topic, I followed the guide, but everything force closes for me after I replace the framework-res.apk.
http://forum.xda-developers.com/showthread.php?t=1342117
There is a patcher which does everything automatically, but neither that work for me, I'm getting strange errors.
Here is my framework-res.apk from Pcfighter's V5 CM7, could somebody make those update zips with that patcher, or some other guide please??
There is a video link in the topic too, it looks nice.
Please, somebody should do it.
Even the rotation animation?
MrAndroid12 said:
Even the rotation animation?
Click to expand...
Click to collapse
Sadly, no
If you want the transitions you can use the UOT kitchen (google for it)
It patches framework and systemui automatically and the transitions are really great
Edit: if you want I can upload an update.zip , it will change the transitions, lockscreen and font to roboto
Sent from my LG GT540 Swift
andreas__ said:
If you want the transitions you can use the UOT kitchen (google for it)
It patches framework and systemui automatically and the transitions are really great
Edit: if you want I can upload an update.zip , it will change the transitions, lockscreen and font to roboto
Sent from my LG GT540 Swift
Click to expand...
Click to collapse
Yes plz upload so I can test it out. Btw are the transition similar to ICS
Sent from my LG GT540 Swift using XDA App
mohnim said:
Yes plz upload so I can test it out. Btw are the transition similar to ICS
Sent from my LG GT540 Swift using XDA App
Click to expand...
Click to collapse
its for PCF's CM7
the animations are very smooth and fading into the next pic
for me like ICS only the animation when tilting the phone isn't changed
remember to clear cache and dalvik cache

Categories

Resources