[Q] Boot after flash via Odin takes 1 hour - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi yesterday I flashed stock LPY via Odin (before that I was on rooted stock LPY).
The flashing was fine and after approximately 5 minutes my device rebooted into stock recovery and displayed the green Android with the rotating blue molecule. The progress bar went immediately to about 25% and got stuck there about 65 minutes, the molecule was still rotating.
After this horrible hour of waiting my device booted and everything was fine.
I flashed a couple of times before via Odin but it never took so long.
Has anyone else experienced this or an explanation fit this wired behaviour?
I need to flash again because I can't get Root, neither via temp CWM method nor via rooted firmware or Cf-Root Kernel.
I think about to flash a three part firmware
but I'm not sure if it is a good idea or if this behaviour is a hint for problem with file system.
Gesendet von meinem GT-N7000 mit Tapatalk 2

did u odin via pc or the mobile ? Odin via mobile is more risky and could be the issue if you donot have proper root, PC is slower and safer.

I used PC Odin. I tried again some minutes ago and it only took 2min o, O
But issues are the same. I can't root it. I flashed latest GB (wipe Rom) and got proper root. But after upgrade to ICS no way to root it.
Gesendet von meinem ARCHOS 101G9 mit Tapatalk 2

and everythink working smoth?? u had luck.. i believe that u could have fried your phone..

zalmd06 said:
and everythink working smoth?? u had luck.. i believe that u could have fried your phone..
Click to expand...
Click to collapse
That's what I was afraid of too. Now I flashed stock ICS again and again it only needed a couple of minutes. I rooted via temp CWR and everything is fine. No issues full Root fast as never before.
I think I'll never know what went wrong but that secondary. Everything is fine that's what really matters
Gesendet von meinem GT-N7000 mit Tapatalk 2

Kanalcommander said:
I used PC Odin. I tried again some minutes ago and it only took 2min o, O
But issues are the same. I can't root it. I flashed latest GB (wipe Rom) and got proper root. But after upgrade to ICS no way to root it.
Gesendet von meinem ARCHOS 101G9 mit Tapatalk 2
Click to expand...
Click to collapse
If you upgraded from rooted GB to ICS ..chances are that you already have root now.. Check this by copying any file into the system folders ....

Related

JVI Firmware, no CWM or Flashing possible?

Hi
i tried flashing a custom rom to galaxy s for a friend of mine.
Personally made this on my ACE very often without problems.
He has the JVI Build and as i now found out theres no CWM in Root Kernel for this build?!
So how to flash anything? If i boot to recovery there is an error
"cant access /system/csc/DBT/system"
And if i want to install CWM manually the installation is aborted.
So what to do now?
Try flashing a custom kernel using odin (cf_root, or sephamore or whatever.
It doesn't have to be the same version as the rom (some of the newer ones will cause bootloops, but you will still be able to access CWM using the button combo).
Odin is your friend.
Ok ill try this tomorrow. Hoping to get it work.
Thanks Bro.
Gesendet von meinem GT-S5830 mit Tapatalk 2

Brick

I'm on JB, just unlocked bootloader. I tryed many times to install cwm without succes, now my phone is bricked after i press on Root.bat, razr_i_boot was written and now i go bootloop on the BOOTLOADER UNLOCKED screen.
What i need to do please?
I need to install RSD and flash ICS then JB? Since i am allready on JB, i can flash directly JB rom?
If this is not the answer, please help me with that, how i can pas that brick? ((((((
I can see the fastboot menu (if this help)
It's enough to flash only the JB Files, ICS will brick your Phone completely.
In your case only the JB Boot.img is needed. You rooted with the ICS Exploit. On JB you have to root via CWM (RazriRoot2.zip)
Gesendet von meinem XT890 mit Tapatalk 2
Glad to see a quick answer, you save my day. Can you tell me please, from where i take only the JB Boot.img?
http://forum.xda-developers.com/showthread.php?p=41852698
Gesendet von meinem XT890 mit Tapatalk 2
Thanks alot HSD-Pilot, really thank you! Phone boot now, huh ..
Now i must to see how to install the cwm, every time its reboot on stock recovery.
Hmm, today i got another brick and i dont understand why and how to solve it!
I format system, cache and factory reset in hope to upgrade to Pi-llama Rom 1.4 rom.
After i restart phone, i am stuck at bootloader warning menu.
Fastboot menu i am able to see.
How i can solve this to skip the bootloader warning and power up the phone?
I tryed to put the JB boot.img but is same, stuck at bootloader warning image.

Stuck in Bootscreen

Hi,
I have updated my firmware.
The details are:
Version-bootloader: 1.56.0000
Version-main: 4.06.1540.2
S-Off
I have installed ViperOne 4.3.0 using TWRP 2.6.3.3. However, I am stuck at the bootscreen for 15 mins. I have tried erasing cache but I am still stuck. Can anyone advise? Thank you!
Did you already try, to flash the ROM again?
And did you verify the md5 sum of the ROM.ZIP, before you flashed it?
I would try to flash the ROM again.
First without a wipe.
If it doesn't help, then flash it with a full wipe.
Gesendet von meinem HTC One mit Tapatalk
Black-FR said:
Did you already try, to flash the ROM again?
And did you verify the md5 sum of the ROM.ZIP, before you flashed it?
I would try to flash the ROM again.
First without a wipe.
If it doesn't help, then flash it with a full wipe.
Gesendet von meinem HTC One mit Tapatalk
Click to expand...
Click to collapse
Yup, I did all that. Verified md5. Reflashed the Rom without wiping and wiping.
This is so weird. Never had an issue.
You made any changes in the aroma installer?
If yes, then try it again, without any customization in the aroma installer.
Try to flash it, in the stock config.
Gesendet von meinem HTC One mit Tapatalk
Black-FR said:
You made any changes in the aroma installer?
If yes, then try it again, without any customization in the aroma installer.
Try to flash it, in the stock config.
Gesendet von meinem HTC One mit Tapatalk
Click to expand...
Click to collapse
Just tried this 15 mins ago. Stock config. Still stuck.
It can't be anything to do with my upgrade from 2.24 to 4.06, right?
I'm going to redownload the Rom again. Anyway, thanks for your help! Much appreciated. Please let me know if there are other ways.
RedDevil4Life said:
Hi,
I have updated my firmware.
The details are:
Version-bootloader: 1.56.0000
Version-main: 4.06.1540.2
S-Off
I have installed ViperOne 4.3.0 using TWRP 2.6.3.3. However, I am stuck at the bootscreen for 15 mins. I have tried erasing cache but I am still stuck. Can anyone advise? Thank you!
Click to expand...
Click to collapse
Have you tried force reboot (hold power button for 15-20 seconds)? It happened to me few times while the first boot after installation and it always helped.
Weird... Maybe flash the recovery again.
Should be quicker, then downloading the ROM.
I'm not sure if it helps but... Why not.
Gesendet von meinem HTC One mit Tapatalk
Black-FR said:
Weird... Maybe flash the recovery again.
Should be quicker, then downloading the ROM.
I'm not sure if it helps but... Why not.
Gesendet von meinem HTC One mit Tapatalk
Click to expand...
Click to collapse
Haha, in the end, I re-installed the recovery, re-downloaded the ROM and installed them. It's all fine now! Thanks alot of your help!

Brick phone

Hello to all fórum users. I need help with mine S5830. I follow a tutorial to get unlock code and after I restart phone was bricked. Now, when I power on it starts blinking. I can go to downloading mode, I tryed some versions of ODIN, as firmwares, one file and multi-file, tried under Windows 7 and 8.1, tried some drivers but the result is the same. ODIN program recognizes phone, starts flashing but when it restarts phone only starts blinking. Please help me
Please, anyone can help me, i`ve been 3 days long seeing tutorials but I can´t find what I´m doing wrong.
Flash a full firmware whit partition.
h4xt0r said:
Flash a full firmware whit partition.
Click to expand...
Click to collapse
By full firmware you mean the one file or the multi file?
Thank´s for the help
Can it be possible that low baterie don´t let it flash, even when flashing goes till the end?
Does ODIN V4.38 compatible with windows 7 64bits?
I pay 10€ with paypal to who resolve my problem.
elamoroso said:
Can it be possible that low baterie don´t let it flash, even when flashing goes till the end?
Does ODIN V4.38 compatible with windows 7 64bits?
I pay 10€ with paypal to who resolve my problem.
Click to expand...
Click to collapse
You must use a older version of Odin. I use a Odin version from here http://forum.xda-developers.com/showthread.php?t=2609021. And try to use another cable.
Hi JanniekM00, and thank´s for the help, but the ODIN version in that page that you said is newer than mine. It is the V4.42. I tried it to but no luck. I tried with a diferente usb cable, one file and multi-file but nothing.
The version of android installed in phone before it as bricked was FROYO.
I am trying with GINGERBREAD roms. Can that be the problem?
I wanted to try with a FROYO rom but I can´t find anywere.
elamoroso said:
Hello to all fórum users. I need help with mine S5830. I follow a tutorial to get unlock code and after I restart phone was bricked. Now, when I power on it starts blinking. I can go to downloading mode, I tryed some versions of ODIN, as firmwares, one file and multi-file, tried under Windows 7 and 8.1, tried some drivers but the result is the same. ODIN program recognizes phone, starts flashing but when it restarts phone only starts blinking. Please help me
Click to expand...
Click to collapse
Blinking? What do you mean?
BTW the correct Odin version for our GT-S5830 is v4.38!
Viper The Ripper said:
Blinking? What do you mean?
BTW the correct Odin version for our GT-S5830 is v4.38!
Click to expand...
Click to collapse
Hi Viper, I mean that after ODIN restart phone to install firmware, it restart but blinking, light on and off, on and off, and to stop I have to take out the batterie.
Try to installiert a custom recovery if you didnt do yet. Then install with the recovery the Rom you wish.
If you bricked your phone and dont have a backup you cant restore the imei.
Gesendet von meinem GT-I9300 mit Tapatalk
YannikM said:
Try to installiert a custom recovery if you didnt do yet. Then install with the recovery the Rom you wish.
If you bricked your phone and dont have a backup you cant restore the imei.
Gesendet von meinem GT-I9300 mit Tapatalk
Click to expand...
Click to collapse
Can you tell me how to install a custom recovery step by step. Thank´s a lot. I reed a tutorial to install cwm recovery but in tutorial says to put file in sd card but after I don´t know how to chose the file because phone only goes to downloding mode.
addictivetips.com/mobile/how-to-install-a-custom-recovery-to-an-android-phone-device/
Gesendet von meinem GT-I9300 mit Tapatalk
---------- Post added at 12:45 PM ---------- Previous post was at 12:42 PM ----------
You must read the manual method
Gesendet von meinem GT-I9300 mit Tapatalk
YannikM said:
Try to installiert a custom recovery if you didnt do yet. Then install with the recovery the Rom you wish.
If you bricked your phone and dont have a backup you cant restore the imei.
Gesendet von meinem GT-I9300 mit Tapatalk
Click to expand...
Click to collapse
Our problem is there's NO a secure way to back up/restore IMEI partition, so you can corrupt the partition when you try it

Custom binaries, need help pls

I know how to fix custom binaries locked by system . But
Twrp does not open
System does not open
Only download mode
I got +10gb of files in my internal memory and I can't wipe it cuz its important 4 me . Is there any way to get stock ROM using Odin ( or somehow bypass it ) to just get those files back ? Then I can simply wipe everything . Any1 ? Pls :'(
When you select the home_csc file from the 4 parts firmware it should install the Rom without wipe data partition
Gesendet von meinem SM-N950F mit Tapatalk
Dirtyflash, there are risks involve I'm sure your aware. (Don't select/tick nan erase or bootloader update in odin when you flash.
Yes, flash a 4 parts firmware with home_CSC is like a dirty flash. But he want to save his 10 GB of data. After he backed them up he can make a clean flash
Gesendet von meinem SM-N950F mit Tapatalk

Categories

Resources