Hi every body,
first. I'm sorry because I have bad ability in communicating in English.
I have tried room ICS for may tab that i came from overcome. there's no problem i found. now I'm using OAKP BUILD 33. I interest to use the newest (BUILD 36) that use MTD partition.
I would like to ask some helps how to convert my tab into MTD partition in order to use rom based on MTD. Thanks for your help
You should restock using overcome guide, or may be you can try just flash latest overcome kernel then reboot into recovery and wipe data/factory reset, wipe dalvic cache, and cache then flash B#36, hold volume up key during the flash process, the tab will reboot into recovery again, repeat the process by selecting install zip from SD.
Sent from my GT-P1000 using XDA
salahmed said:
You should restock using overcome guide, or may be you can try just flash latest overcome kernel then reboot into recovery and wipe data/factory reset, wipe dalvic cache, and cache then flash B#36, hold volume up key during the flash process, the tab will reboot into recovery again, repeat the process by selecting install zip from SD.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
It's work, thanks
Glad you make it, you're welcomed.
Sent from my GT-P1000 using XDA
Related
I have to post here because I can't post in the direct thread.
http://forum.xda-developers.com/showthread.php?t=1510940
How do I actually install this? I've flashed ROMs before and I assume I can flash this one through CWM but it doesn't say what base OS you need to have running on the phone in order to flash it.
What rom are you currently running? If you are running one of the ics asop roms then I think you are good to go
Sent from my GT-I9000 using xda premium
Hi Guys
DarkKnights Author Recommend
Installation:
1. DOWNLOAD ZIP
2. WIPE DATA/FACTORY RESET.
3. WIPE CACHE PARTITION.
4. FLASH AND THEN REBOOT.
Click to expand...
Click to collapse
I Suggest if you come from Stock ROM
Flash a Kernel with CWM (CF-ROOT kernel with Addon, my Favorite) with Odin/Heimdall
Boot into CWM Recovery Mode
WIPE DATA/FACTORY RESET
WIPE CACHE PARTITION
Flash latest CyanogenMod (be sure, you do it with full version)
Boot into CWM Recovery Mode
WIPE DATA/FACTORY RESET
WIPE CACHE PARTITION
Flash the DarkKnight ICS
Have Fun !
I know it isn't the Best Way, but it surely will do if you like that !
Don't forget to thanks [if it useful was for you]
_______________
I was more asking which ROM to come from.
I ended up flashing 2.3.5 JVT and then this over the top of Semaphore kernel.
Hi Everyone,
I have the Samsung galaxy p1000 tablet which is rooted and running stock firmware version 2.3.3 ....i have rooted it using doomslord toolkit....
.....I want to install cm9 on my tab....but i want to make sure everything is good before i start doing anything.......
i tried downloading overcome but download stopped everytime.......
i have downloaded overcome kernel 4.0.0.tar though.....
i want clockwork mod recovery on my tab.....how can i do that?
i am on stock firmware so do i need to restock it through overcome......or flashing the overcome kernel would do it all....
should i flash the overcome kernel only......is it feasible to use that kernel for stock firmware.....will the kernel convert tab into ext4 thereby making it possible to flash cm9
please help me over this......
Thanks..
I did that before, flash the kernel, wait for the conversion to ext4, reboot and flash cyanogen mod. For me it worked for installing AOKP mtd.
Sent from my GT-P1000 using XDA
Thanks salahmed......but one more question...was ur stock firmware rooted when u flashed the kernel cause that's what is bothering me...and how do i return to my original device clean firmware once i am using cm9....
Thanks once again...
Sent from my GT-P1000 using XDA
You can always restock using overcome stock safe.
Sent from my GT-P1000 using XDA
I have some free time today and so i will flash the rom today.....
Are these the steps i should follow???
1. Flash the overcome kernel only without restocking....
2. let it convert the system into ext4....and let it reboot after it...
3. Then shut down the tab and press volume down and power buttons at the same time till the clockworkmod recovery shoots up....
4. Then navigate to ' install from zip' and select AOKP BUILD 37(decided to flash AOKP) zip file....let it flash and then flash kernel(which kernel should i flash????? or does the AOKP zip contain it and hence it should be automatically flashed)
5. Then flash gapps.....
6. when it's done ....reboot
questions....
when should i wipe dalvik cache and data( before flashing AOKP zip or after that)
?????
also i read somewhere that i can revert back to original samsung firmware by flashing original samsung firmware via odin with "repartion checked".....
After flashing overcome kernel go to recovery wipe cash, dalvic cash, factory reset format data, then flash AOKP, the kernel is included 'z image' , then reboot system let it to complete booting, then reboot recovery again and flash gapps.
And that's right you can revert back with re partition but I did not try it.
Sent from my GT-P1000 using XDA
Hi!
I have a problem after trying to flash Cyanogen 9 on my Galaxy note and now it can't get pass the "Touch android to begin" screen.
I have tried flashing the stock rom using Odin but it still encounters this error.
Is there anything i could do to save it
Just go into recovery and wipe cache and dalvik cache and reboot and it will be fine
Sent from my GT-N7000 using xda premium
When i try wiping dalvik cache, it says
unknown volume for path [/sd-ext]
Yeah that's fine it says it on mine after you have wiped both cache 's reboot and it should be fine
Sent from my GT-N7000 using xda premium
Sorry for double posting.
Tried wiping the cache, still hangs after the touch Android to begin screen and reboots.
Try doing a full wipe data you are on gb kernal so no need to worry about bricking
Sent from my GT-N7000 using xda premium
I did a wipe data/factory reset, wipe cache partition and wipe dalvik cache
Still hangs and reboots after the touch android screen :/
Is it cause i tried flashing CM9 from the stock ICS rom?
Ronal10 said:
I did a wipe data/factory reset, wipe cache partition and wipe dalvik cache
Still hangs and reboots after the touch android screen :/
Is it cause i tried flashing CM9 from the stock ICS rom?
Click to expand...
Click to collapse
Yes it is.
hgberry said:
Yes it is.
Click to expand...
Click to collapse
What do i do :/
Sorry again for double posting.
I tried using Odin to flash it back to a stock gingerbread ROM, still hangs at the start up screen.
Hi,
I have a Galaxy Tab P-1000, and some months ago I installed the Overcome 7 v.4.1.0 ROM following this guide: www .teamovercome.net/p1000/?page_id=17.
Now I'd like to install the new official CM9, but I don't know which steps I have to follow, since I don't have a stock rom anymore.
This is the guide I'm trying to follow: wiki.cyanogenmod.com/wiki/Samsung_Galaxy_Tab_%28GSM%29:_Full_Update_Guide
Should I simply follow the steps in the "Flashing CyanogenMod" section, since I already have installed the Overcome ROM with its "Overcome CwMod Recovery version 4.1.0.9"?
Thanks
Yes, put cm9 zip and gapps zip in sdcard,
Boot to cwm recovery,
Then wipe cache, data and dalvik cache, then flash cm9 (may need to do twice) then flash gapps.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Yes, put cm9 zip and gapps zip in sdcard,
Boot to cwm recovery,
Then wipe cache, data and dalvik cache, then flash cm9 (may need to do twice) then flash gapps.
Click to expand...
Click to collapse
Worked like a charm! Thank u!
I have s5830 I can install all cm7 cm 7.2 and they works perfect. But when I try to install cm 9, cm10, cm 10.1 roms my phone stocks at samsung logo and restarting. What is the problem ??
alycann said:
I have s5830 I can install all cm7 cm 7.2 and they works perfect. But when I try to install cm 9, cm10, cm 10.1 roms my phone stocks at samsung logo and restarting. What is the problem ??
Click to expand...
Click to collapse
Did you do all three wipes? If not, first do that. Wipe Data/Factory Reset, Wipe Cache Partition, then go to Advanced & Wipe Dalvik Cache. Then to Mounts & Storage, Format Cache, Format Data & Format System. Now try to install ROM and again do all three wipes and this time don't touch Mounts & Storage. Hope, this will work.
If the above procedure fails then go to Stock ROM and then install CM9 or CM10. You can use Odin to flash the Stock ROM.
also expager
keylocker said:
Did you do all three wipes? If not, first do that. Wipe Data/Factory Reset, Wipe Cache Partition, then go to Advanced & Wipe Dalvik Cache. Then to Mounts & Storage, Format Cache, Format Data & Format System. Now try to install ROM and again do all three wipes and this time don't touch Mounts & Storage. Hope, this will work.
If the above procedure fails then go to Stock ROM and then install CM9 or CM10. You can use Odin to flash the Stock ROM.
Click to expand...
Click to collapse
I installed stock 2.3.4 with odin and I try to install again but same error. It stucks at Samsung Logo.
There is something. When I select wipe Data/Factory reset there is one error "format_volume: rfs format failed on /dev/block/mmcblk0p2"
What recovery are you using ?
Sent from my Galaxy Ace GT-S5830 using xda premium
alycann said:
I have s5830 I can install all cm7 cm 7.2 and they works perfect. But when I try to install cm 9, cm10, cm 10.1 roms my phone stocks at samsung logo and restarting. What is the problem ??
Click to expand...
Click to collapse
Hi!
you need to wipe three caches: factory, cache and dalvik (in advanced page).
Venomous Viper 119 said:
What recovery are you using ?
Sent from my Galaxy Ace GT-S5830 using xda premium
Click to expand...
Click to collapse
I have cwm 5.0.26
different recovery
try using different recoveries available my friend
first format your sd card
second revert to stock rom using odin
third install a different cwr
fourth do all 3 wipes
five format data ,system and cache
again do all 3 wipes
last install the cm9 or cm10 rom and i think you will bang man
install roms
alycann said:
I have cwm 5.0.26
Click to expand...
Click to collapse
you can also try http://forum.xda-developers.com/showthread.php?t=1660348
Full wipe & flash. It must work.
Sent from my Galaxy Ace GT-S5830 using xda premium