[q] installing cwm recovery and cm9 on sgt p1000 india - Galaxy Tab Q&A, Help & Troubleshooting

Hi Everyone,
I have the Samsung galaxy p1000 tablet which is rooted and running stock firmware version 2.3.3 ....i have rooted it using doomslord toolkit....
.....I want to install cm9 on my tab....but i want to make sure everything is good before i start doing anything.......
i tried downloading overcome but download stopped everytime.......
i have downloaded overcome kernel 4.0.0.tar though.....
i want clockwork mod recovery on my tab.....how can i do that?
i am on stock firmware so do i need to restock it through overcome......or flashing the overcome kernel would do it all....
should i flash the overcome kernel only......is it feasible to use that kernel for stock firmware.....will the kernel convert tab into ext4 thereby making it possible to flash cm9
please help me over this......
Thanks..

I did that before, flash the kernel, wait for the conversion to ext4, reboot and flash cyanogen mod. For me it worked for installing AOKP mtd.
Sent from my GT-P1000 using XDA

Thanks salahmed......but one more question...was ur stock firmware rooted when u flashed the kernel cause that's what is bothering me...and how do i return to my original device clean firmware once i am using cm9....
Thanks once again...
Sent from my GT-P1000 using XDA

You can always restock using overcome stock safe.
Sent from my GT-P1000 using XDA

I have some free time today and so i will flash the rom today.....
Are these the steps i should follow???
1. Flash the overcome kernel only without restocking....
2. let it convert the system into ext4....and let it reboot after it...
3. Then shut down the tab and press volume down and power buttons at the same time till the clockworkmod recovery shoots up....
4. Then navigate to ' install from zip' and select AOKP BUILD 37(decided to flash AOKP) zip file....let it flash and then flash kernel(which kernel should i flash????? or does the AOKP zip contain it and hence it should be automatically flashed)
5. Then flash gapps.....
6. when it's done ....reboot
questions....
when should i wipe dalvik cache and data( before flashing AOKP zip or after that)
?????
also i read somewhere that i can revert back to original samsung firmware by flashing original samsung firmware via odin with "repartion checked".....

After flashing overcome kernel go to recovery wipe cash, dalvic cash, factory reset format data, then flash AOKP, the kernel is included 'z image' , then reboot system let it to complete booting, then reboot recovery again and flash gapps.
And that's right you can revert back with re partition but I did not try it.
Sent from my GT-P1000 using XDA

Related

Will this work?

Hi ya all,
Just wondering if I can do this:
1) Flash to CF-Root kernel (As close to JV7 as I can get)
2) Flash CM7.1 for i9000
3) Flash Glitch v13.1 kernel (if it has CMW, does it?)
The reason for doing this is to get past the 3e recovery console, as that's stopping me installing CMW outright (from Rom Manager) which I need to flash Glitch.
Tbh, not even worried about which version of CF-Root I flash long as it boots... only going to be on the phone a matter of minutes.
So, will it work? Is there a better way?
Thanks in advance good peeps of XDA
If you come from GingerBread Stock Rom
so you've got System 3e
with 3e can't you flash Zip file over Recovery Mode
You Had Right Way but maybe make a little mistake
If you use CF-Root, then use pls the kernel with Addon CWM (I prefer DarkCore 4.1)
So you've got System 2e, after flashing Kernel
Download
[CF-ROOT] --> http://forum.xda-developers.com/showthread.php?t=788108 (take the one with ending "-CWM")
[DarkCore] --> http://sourceforge.net/projects/ficeto.u/files/
*Important
to do before flash CM
WIPE (wipe data/factory reset + wipe cache partition)
*Optional
to do before flash Glitch Kernel
WIPE (wipe data/factory reset + wipe cache partition)
_____
If it was useful don't forget to Thanks
Thank you very much very much diklooc didn't know about the cleaning before install CM7, could have been messy lol.
One more question, if I flash CF-Root with has CMW built into it, will I loose CMW if I flash Glitch?
If CMW will get deleted after flashing Glitch, or if no one really knows... can I flash CF-Root then get ROM Manager and reflash CMW? If I do this, CMW wont disappear if I flash Glitch? ...if CMW will dissapear after flashing Glitch this is.
I could be getting this completely wrong, plus I don't know if Glitch has CMW built in... if it does then there wont be any issues as far as I can see.
Anyone know if there is an Odin version of Glitch (I haven't seen one...)? Would save having to flash anything else as this feels like "the long way round".
Thanks again all, awesome community
You will not lose cwm from flashing glitch, indeed you will have a gucci custom cwm......
No requirement to use rom manager for cwm - that method hasn't really been used since eclair.
Sent from my GT-I9000 using xda premium
No odin flashable version of glitch which I have seen.
Sent from my GT-I9000 using xda premium

Flashing from one custom firmware to another

Hello guys,
actually I've darkysrom with darky kernel on my SGS but I want to change to another custom firmware, mainly because of ICS.
Can I flash the new cfw just by using clockworkmod? Because I remember that there was something concerning the kernel which was important before flashing to another cfw.
Do I have to disable the lagfix before flashing?
Yes you must disable lagfix to avoid problems with the new kernel.
Sent from my GT-I9000T using XDA
http://www.darkyrom.com/community/index.php?forums/pure-off-topic.13/
go here and here
http://hdtechvideo.com/community/index.php
Do I have to seperately flash another kernel or is that been done by flashing the cfw?
Disable lagfix, wipe (data, cache, daliv cache), Flash ROM via CWM, flash new kernel. If it gives you bootloop go to CWM and flash kernel again. It should work ;-)
Hi,
i tried to flash slim ics but something wrong happened. first i opened clockwork recovery and wiped everything. after that i tried to install from zip and choosed the base file of ics slim rom but there came a message which said that the installation was aborted. then i've read in the tutorial that one has to format the system but it still didnt work.
now the phone doesnt boot anymore but i can get to clockwork recovery. i recognized that it is a modificated version from darky with the name "cwm darkycore recovery" or something like that.
can someone please help?
EDIT:
ok the phone is back alive. i flashed darkyrom with odin.
but i guess the same will happen if i try to flash slim ics again so there must be another way right?
EDIT2:
i got it. just installed the cm9 with cwm darky core recovery and after that installed slim ics.
if you've got to the trouble of odin-flashing the darkyrom back ,why didnt you just flash something else ?
http://forum.xda-developers.com/showthread.php?t=1494493

boot loop in cyanagenmod 7.2

hi,
I used to have darky rom 10.4.2 on a Samsung galaxy S .
wanted to move to cynagenmod 7.2 stable, but when i was flashing it using clockworkmod 5.x,
the phone has got into a boot loop.
been searching over a few hours now, nothing comes close to fixing the issue.
can you share some experience here and help.
regards
raghav..
If you can't acces CWM, you can try to flash some other kernel for CM7.2, if won't help, the only way is to download some official ROM from samfirmware.com, flash it using Odin, then ROOT it and try to flash CM7.2 again...
Do you have a backup (Nandoid or titanium backup )? That's important for all following actions.
If not, pull out the battery and try to get into cwm of darky ROM. Otherwise flash the resurrection ROM (via Odin) from darky. After that do a backup and erase all data (wipe data,cache and dvailk cache). Flash a 7.2 ROM (like miui) or kernel to get the 5.xx cwm and finally restore your backup
If u get any issuses, repeat with a stock ROM which is already rooted.
Sent from my GT-I9000 using Tapatalk 2

Flashing Kernel

Am having a strange error when i try flashing any Kernel on my Stock ICS 4.0.4 Kernel...
steps followed
1. CF Root v5.6 Kernel, Abyss Red Kernel copied to External SD card,
2. Reboot recovery
3. Select Abyss Red Kernel
Display shows this
Finding Update package
Opening Update package
Verifying Update package
E:Signature Verification failed
How do i flash a kernel in this situation .. please help...
Have you tried installing using odin?
Sent from my GT-N7000 using xda premium
Did not go to PC Odin yet .. I wanted to flash a safe Kernel .. then wipe stuff.. then install Paranoid Android v0.5 (ICS)...
Wanted to understand why i can not flash a kernel ...
You can't flash a kernel in recovery without being rooted. In fact you shouldn't be messing with recovery if you are running ICS. just flash the kernel with ODIN PC and then use triangle away to reset counter. Stock recovery just flashes official updates and files.
Sent from my GT-N7000 using xda app-developers app
glevitan said:
You can't flash a kernel in recovery without being rooted. In fact you shouldn't be messing with recovery if you are running ICS. just flash the kernel with ODIN PC and then use triangle away to reset counter. Stock recovery just flashes official updates and files.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
humm.. I though i can flash a Kernel without problem... and then Wipe and flash a Custom ROM
i do know that I should not do a wipe while I am on stock ICS Kernel (will be BRICK)
Best and Safest Way to Flash Paranoid Android
Flash Stock GB via Odin Pc
Wipe Cache/Dalvik
Root Device/Install CWM
Reboot Recovery
Flash PA
Flash Gapps
Do All 3 Wipes
Reboot
This method is for a clean install and with this you can be sure of the quality and performance of ROM you are installing, No FC's / SOD's
Shortcut :-
CWM Recovery
Flash Abyss 4.2
Reboot Recovery
Flash PA
Flash Gapps
Do All 3 Wipes
Reboot System
Hope it helps
Coolkriss said:
humm.. I though i can flash a Kernel without problem... and then Wipe and flash a Custom ROM
i do know that I should not do a wipe while I am on stock ICS Kernel (will be BRICK)
Click to expand...
Click to collapse
you will need a custom recovery first...that is why u usually flash the custom Kernel (that includes CWM) in ODIN PC. then, when u are rooted you can use mobile Odin...
Thanks guys.. I did not want to go the full process hence wanted to try this method..
anyway I waited and then went through the know .. Foolproof safe method .. The GB way...
Am on PA 0.5 now ..

Not able to install paranoid on my note

hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
What process are you using to flash paranoid rom?
chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
Can you provide more info, what kernel and rom are you using to flash PA?
Hi
I tried it from ics (crash v8.1, liquid black 3.2, criskelorom v9, fusion Tom 2.5, rocket Tom v10) ........ no result
I tried it from the gb 2.3.6 (stock).... no result
I used clockworkmod recovery... abyss kernel
Everytime the same problem hung on the boot logo... and no access to clockworkmod recovery....
Sent from my GT-N7000 using xda app-developers app
Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note
Att.Fan1982 said:
Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Do I need to install abyss kernel to format and wipe or the native 5.0.2.7 recovery is enough.. and is it safe to wipe cache,format factory reset in stock 2.3.6 by cwm recovery 5.0.2.7
Sent from my GT-N7000 using xda app-developers app
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Ok let me try
I will let u know about the progress
Sent from my GT-N7000 using xda app-developers app
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
done .... flashed stock 2.3.6 gb rom... flashed cwm recovery and did the same as u told me to do... but again struck on the boot screen logo...
i cant access recovery but can still access download mode....
even i cant understand where is the problem why paranoid is not working on my note.....confused
can i try installing paranoid without installing gapps..... will that work or not?
when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
rraaka said:
when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?
Click to expand...
Click to collapse
i used CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5.rar to root and install recovery...
if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....
rraaka said:
if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....
Click to expand...
Click to collapse
190712-102621-STAXXTANIUM-v17.zip
paranoid_note_v05.zip
paranoid_note_v04a.zip
nothing is working
and when i try to install
crashrom
criskelrom
liquidblack
etc
they work fine...
its only when i try to install paranoid i get this problem.... cant understand y
there is one difference is paranoid and other roms is size... paranoid is abt 130mb but rest of the custom roms are 700 to 800 mb
your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?
rraaka said:
your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?
Click to expand...
Click to collapse
yes working absolutely perfect... and recovery is also acccessable...
stock and all other custom roms are working
only problem when i try to install any damn version of paranoid
you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
if this doesnt work ill tell you a method using CM9 safe kernel tar ( give me some time)
rraaka said:
you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
Click to expand...
Click to collapse
i have already tried this procedure so many times, but everytime after finishing installation, rebooting the phone and damn its struck again at boot logo.....
i think its the kernel and recovery which gets erased during the installation of paranoid thats y it gets struck at boot logo
Maybe you have a corrupted download. Check md5 sum to verify.
sahilarora2003 said:
Maybe you have a corrupted download. Check md5 sum to verify.
Click to expand...
Click to collapse
i verified all the zip files (roms) i downloaded..... everything is just fine
chochweet said:
i verified all the zip files (roms) i downloaded..... everything is just fine
Click to expand...
Click to collapse
Do these steps and let me know if its still there.
As I know you are on Rooted GB rom right now.
So Reboot into recovery
Full Wipe
Reboot Recovery
Go to Mounts and storage
Mount system
mount cache
mount data
Format data
Format system
Format Cache
Reboot Recovery
Now
Flash Paranoid Rom
Flash Gapps
Now Again Full Wipe
Reboot System
C if it works
Cheers

Categories

Resources