hi,
I used to have darky rom 10.4.2 on a Samsung galaxy S .
wanted to move to cynagenmod 7.2 stable, but when i was flashing it using clockworkmod 5.x,
the phone has got into a boot loop.
been searching over a few hours now, nothing comes close to fixing the issue.
can you share some experience here and help.
regards
raghav..
If you can't acces CWM, you can try to flash some other kernel for CM7.2, if won't help, the only way is to download some official ROM from samfirmware.com, flash it using Odin, then ROOT it and try to flash CM7.2 again...
Do you have a backup (Nandoid or titanium backup )? That's important for all following actions.
If not, pull out the battery and try to get into cwm of darky ROM. Otherwise flash the resurrection ROM (via Odin) from darky. After that do a backup and erase all data (wipe data,cache and dvailk cache). Flash a 7.2 ROM (like miui) or kernel to get the 5.xx cwm and finally restore your backup
If u get any issuses, repeat with a stock ROM which is already rooted.
Sent from my GT-I9000 using Tapatalk 2
Related
Hello, I have been using darky 9.5 rom for a while without problems but today CM7 launched the long waited nightly and I decided to try it. I made a backup from the dark core recovery and then flashed the CM7 rom perfectly. I didnt like it at all so I wiped everything in order to restore the darky backup...
And then the problems came up. The restore said successful but the phone stuck at first GT-I9000 logo. I reverted the phone to stock and installed clockworkmod but still cant boot into the rom. However, I can restore my first stock backup so I think its a boot.img problem or something like that.
Can I delete boot.img from the folder and try to restore with a darky rom installed? It should be the same boot.img
Its not a big deal but I hate to reinstall all my apps from the market and configure them!
Thanks!
Install the "stock rom" with kernel speedmod and bootloader that are in Sourceforge in CM7 (GT-I9000 FROYO full PDA) , after wipe all .
OK, restore your backup
mrmela said:
Install the "stock rom" with kernel speedmod and bootloader that are in Sourceforge in CM7 (GT-I9000 FROYO full PDA) , after wipe all .
OK, restore your backup
Click to expand...
Click to collapse
So the order is:
1. Back to stock rom
2. Root the rom
3. Install speedmod
4. Install bootloader
5. Wipe
6. Restore
Am I right? Thanks!
The speedmod is including in the rom (is full rom stock with mod kernel)
mrmela said:
The speedmod is including in the rom (is full rom stock with mod kernel)
Click to expand...
Click to collapse
Ok I did that and still stuck at the first boot screen
you run the factory\reset and all wipe by cwm?
mrmela said:
you run the factory\reset and all wipe by cwm?
Click to expand...
Click to collapse
Yes I did. Probably the backup is corrupted. I spent all this morning installing again the darky rom and configuring all my apps. Thank you anyway
I had the same problem, im not professional but I think its becouse Cm7 is 2.3.4 and Darky is 2.3.3...
I firstly flashed Froyo w/ bootloaders and then I installed Darky v10.
After that I want to CMW >advanced restore and restored my /data so I got all my programs back
Pardon me, if i have posted a problem that was posted before, but i have gone through the site and couldnt find a solution to this problem.
I have been flashing some CM7/MIUI based roms with no problems, now i have tried to flash other roms (following instructions to the letter) but i have hit a brick wall, its eithr the process aborts before it starts or i get stuck with boot loops.
im currently on a MIUI rom (MIUI 2.1.6) baseband i900XXJVT
stock MIUI kernel.
here is a list that have failed to work through CMW:
F1 Innovation HD v7.0 (WIPE)
MilkyS_Mod_v1.2_CWM_wipe
SGS ICS Doctor's Rom v1 by VibranTurk
GTI9000_JW1_deodex_zipalign_Root
Im not a fan of ODIN because im afraid of bricking my phone hence i prefer CMW flashable roms. Please Help me
thank you in advence
hello there,
you could flash teamhacksung's ICS Port from Cyanogenmod. (I assume you have made a nandroid backup)
That worked for me...
sometimes a rom requires an additional wipe of your data/cache, or a second flash to work!
also give odin a try! you wont brick if you dont do anything stupid.
You need to flash the stock rom after flashing cyanogenmod, miui or any aosp rom.
You can flash samsung based custom roms after flashing with odin.
geniac said:
hello there,
you could flash teamhacksung's ICS Port from Cyanogenmod. (I assume you have made a nandroid backup)
That worked for me...
sometimes a rom requires an additional wipe of your data/cache, or a second flash to work!
also give odin a try! you wont brick if you dont do anything stupid.
Click to expand...
Click to collapse
thanks i will give Teamhacksung's ICS port, i hope it will work, i like my phone to have its freedom.
Quote from teamhacksung's ICS Port Thread :
- Upgrading from CM7?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
----------------------------------------------------------------
So it is not nessecary to flash different bootloaders or a Samsung Stock Rom....
In my case i had to do the "Install the ROM from internal sdcard using ClockworkMod Recovery" twice to get it working.
It would be nice to hear when you've made any progress.
Hello guys,
actually I've darkysrom with darky kernel on my SGS but I want to change to another custom firmware, mainly because of ICS.
Can I flash the new cfw just by using clockworkmod? Because I remember that there was something concerning the kernel which was important before flashing to another cfw.
Do I have to disable the lagfix before flashing?
Yes you must disable lagfix to avoid problems with the new kernel.
Sent from my GT-I9000T using XDA
http://www.darkyrom.com/community/index.php?forums/pure-off-topic.13/
go here and here
http://hdtechvideo.com/community/index.php
Do I have to seperately flash another kernel or is that been done by flashing the cfw?
Disable lagfix, wipe (data, cache, daliv cache), Flash ROM via CWM, flash new kernel. If it gives you bootloop go to CWM and flash kernel again. It should work ;-)
Hi,
i tried to flash slim ics but something wrong happened. first i opened clockwork recovery and wiped everything. after that i tried to install from zip and choosed the base file of ics slim rom but there came a message which said that the installation was aborted. then i've read in the tutorial that one has to format the system but it still didnt work.
now the phone doesnt boot anymore but i can get to clockwork recovery. i recognized that it is a modificated version from darky with the name "cwm darkycore recovery" or something like that.
can someone please help?
EDIT:
ok the phone is back alive. i flashed darkyrom with odin.
but i guess the same will happen if i try to flash slim ics again so there must be another way right?
EDIT2:
i got it. just installed the cm9 with cwm darky core recovery and after that installed slim ics.
if you've got to the trouble of odin-flashing the darkyrom back ,why didnt you just flash something else ?
http://forum.xda-developers.com/showthread.php?t=1494493
Hi Everyone,
I have the Samsung galaxy p1000 tablet which is rooted and running stock firmware version 2.3.3 ....i have rooted it using doomslord toolkit....
.....I want to install cm9 on my tab....but i want to make sure everything is good before i start doing anything.......
i tried downloading overcome but download stopped everytime.......
i have downloaded overcome kernel 4.0.0.tar though.....
i want clockwork mod recovery on my tab.....how can i do that?
i am on stock firmware so do i need to restock it through overcome......or flashing the overcome kernel would do it all....
should i flash the overcome kernel only......is it feasible to use that kernel for stock firmware.....will the kernel convert tab into ext4 thereby making it possible to flash cm9
please help me over this......
Thanks..
I did that before, flash the kernel, wait for the conversion to ext4, reboot and flash cyanogen mod. For me it worked for installing AOKP mtd.
Sent from my GT-P1000 using XDA
Thanks salahmed......but one more question...was ur stock firmware rooted when u flashed the kernel cause that's what is bothering me...and how do i return to my original device clean firmware once i am using cm9....
Thanks once again...
Sent from my GT-P1000 using XDA
You can always restock using overcome stock safe.
Sent from my GT-P1000 using XDA
I have some free time today and so i will flash the rom today.....
Are these the steps i should follow???
1. Flash the overcome kernel only without restocking....
2. let it convert the system into ext4....and let it reboot after it...
3. Then shut down the tab and press volume down and power buttons at the same time till the clockworkmod recovery shoots up....
4. Then navigate to ' install from zip' and select AOKP BUILD 37(decided to flash AOKP) zip file....let it flash and then flash kernel(which kernel should i flash????? or does the AOKP zip contain it and hence it should be automatically flashed)
5. Then flash gapps.....
6. when it's done ....reboot
questions....
when should i wipe dalvik cache and data( before flashing AOKP zip or after that)
?????
also i read somewhere that i can revert back to original samsung firmware by flashing original samsung firmware via odin with "repartion checked".....
After flashing overcome kernel go to recovery wipe cash, dalvic cash, factory reset format data, then flash AOKP, the kernel is included 'z image' , then reboot system let it to complete booting, then reboot recovery again and flash gapps.
And that's right you can revert back with re partition but I did not try it.
Sent from my GT-P1000 using XDA
Hi all, so I'm currently looking for a way to go back to stock Touchwiz (4.0.3) from CM10.
I'm currently running CM10 and i do have a Nandroid backup from when I was on Touchwiz (and running PhilZ safe kernel), but the thing is I've been running CM10 for a few months and have a lot of new data stored on my phone.
So instead of backing up anything new and just restoring my backup, could i just flash a stock firmware through ODIN or CWM on top of CM10? Or if I tried that would I have to wipe anyway?
Thanks any help appreciated.
going back from custom to stock causes boot loops and a wipe will be necessary. so better do a nandroid backup of th current rom, then when in stock rom, use tb to restore data using the nandroid backup.
Sent from my GT-N7000 using xda premium
Ok this thread is dead but I will have to revive it now because I wanna do the same thing.
I have been on Cm10 and wanted to go to Alliance ROM today. So like a complete idiot I flashed pre-rooted KJ1 gingerbread ROM from Dr.Ketan over my CM10 and got stuck in a boot loop. Luckily had a nandroid backup and now restoring as I type.
What is the correct process to go from CM to stock GB or ICS?
Any and all help is appreciated
Thanks in advance.
Cheers,
Kaushik
EDIT: I flashed the pre-rooted GB ROM because I wanted to do a full wipe and then flash over to stock ICS and then to Alliance JB ROM.
What is the correct process to go from CM to stock GB or ICS?
Click to expand...
Click to collapse
Either flash using PC odin. after flashing if on GB, boot into recovery and do a factory reset. If on ICS, install a safe kernel (eg,Philz) and reboot recovery and do a factory reset,
OR
Flash a custom GB or ICS rom using recovery after all wipes and formats (system, data, cache)