Database Develop

[Q] please help me boot loop ics 4 rc 1 galaxy s i9000

please help me my phone wont boot into recovery it just loops at that rainbow android guy ...becouse i acedentaly tried to flash wrong zip that was miui ics 4.0.3 for nexus s..and i have galaxy s gt i9000 ...
it is not detected in odin and heimdall ...(not recognized by windows ) ?
do i need windows usb drivers =? what ones ? i have downloaded usb drivers from softpedia for usb but not recognized ?
and i have a mac ...... when i pluged in before my ics rc 1...the usb was not recognized ...or i did not set up right....
i also have windows pc...so i can try whatever....... or parallels.....
so please help me ? download mode not recognized .... ?
what do i need to do ?

Does the download mode work? Do you get a downloading image on the screen?

dhiru1602 said:
Does the download mode work? Do you get a downloading image on the screen?
Click to expand...
Click to collapse
My case is the same. I can get only into Download Mode.
... Until now I have successfully installed any version from 6 to 11, using SAMSUNG USB Driver for Mobile Phones.
Today I flashed Build 12 and Google Apps (v7.1). Then I made WIPE (wipe data/factory reset + wipe cache partition) and my GT-I9000 stuck at the boot screen... It is impossible to get into Recovery Mode. I can get into Donwload Mode ! But when I connect my phone via USB and via Odin - my PC cannot recognise the "unknown device". OK, new drivers.
I tried "Galaxy Nexus" driver : Samsung_USB_Driver_for_Moblie_Phones_v1_4_6_0.exe - unsuccessfully - my PC cannot recognise the "unknown device" again.
I installed "Google USB Driver for Windows" (revision 4) with Android SDK and AVD Manager. But my computer's
"Device Manager" cannot "Update Driver Software" - it displays an error : "Code 10" (The device cannot start).
---------- Post added at 01:13 PM ---------- Previous post was at 12:16 PM ----------
Fortunately, after couple hours of reading on SGS forums,
I found simple solution of the problem:
At first, I installed again regular "Samsung Galaxy S USB Driver": (drivers.softpedia.com/progDownload/Samsung-Galaxy-S-USB-Driver-for-Windows-x86-Download-96692.html) and did not used the Google USB driver (for my GT-I9000)!
Second, after changing the USB port on my computer, I did what I read here, in a post from "westy": "...Remove USB cable. Put phone into download mode. Plug USB into phone and then into computer and hopefully Odin picks it up as it did with mine."
(samsunggalaxysforums.com/showthread.php/2530-USB-connection-not-recognized-by-computer/page2)
It works !

[Q] Bricked Bionic !! Serious !!

Hey guys,
I have bionic with 902 radio. Two days ago I wanted to come back from Eclipse 2.2 to stock also 902. Started Bootstrap , wiped files and i picked WRONG file ... :/ flashed Deodexed first stock file :/ .... Now when i turn on bionic it puts me to green android guys that says Welcome Droid Bionic , touch android to begin, when i do it it shows " Please wait, this may take a few minutes" .....Im not lucky already 8 hours ... :/ its still there with notification and does nothing ..... I can connect USB and put files on SD card and phone is seen on PC. I tried to go into fastboot and thru RSD Lite flash over stock FXZ file BUT when I connect in AP Fastboot mode (S) my phone is not seen on PC.....when i go into SBF mode its seen as Motorola Flash Module Interface....:|
Now i dont know what to go .... I can start phone holding volume buttons and pick recovery ( i put Eclipse rom back on SD CARD but it doesnt want to flash , it says that there is problem with signature)....
So I dont know what to do ....I ask YOU guys for help ....I hope its not THE END of my bionic .....

Nope...its not the end
You need to use RSDlite 5.6 with the full 902 xml file.
Make sure you have the latest moto-drivers (5.4 or 5.5) installed on your PC.
Make sure you are using the cable that came with your phone when using RSDlite.
If you want to save your internal sdcard...there is an edited file that timmy10shoes made.
I can dropbox all these items for you except, the full 902 xml file.
Or you can get all the files here... http://www.droidforums.net/forum/droid-bionic-hacks/202176-detailed-safestrap-instructions.html

I have cable that came with phone but i even reinstalled system from win 7 64 to 32... and still NOTHING
and yes can u drop box it ?

try plugging it in from the back of the pc. sometimes secondary usb hosts dont work. that was my problem for a while lol.

tyracz said:
I have cable that came with phone but i even reinstalled system from win 7 64 to 32... and still NOTHING
and yes can u drop box it ?
Click to expand...
Click to collapse
I am at work right now and I might not find the time to look through my dropbox.
But everything is at that website. Just go over there are start downloading the files. The full 902 xml file is going to take awhile.
---------- Post added at 01:40 PM ---------- Previous post was at 01:39 PM ----------
HorsexD said:
try plugging it in from the back of the pc. sometimes secondary usb hosts dont work. that was my problem for a while lol.
Click to expand...
Click to collapse
Great point. I guess, I just figured he tried all usb ports.

yes i did try all of them .... i hav 5.4.0 drivers and nothing :| sees phone in SBF mode but not in FastBoot :/
Dont upload anything on dropbox cuz i already have all the files....
Ap Fastboot Flash Menu Mode (S) ..... and pc doesnt see phone :/

Go here...http://www.motorola.com/Support/US-...tware_and_Drivers/USB-and-PC-Charging-Drivers
Try the 5.5 drivers
How old is your PC?
Sometimes Rsdlite might just say connected and wont say anything about the device that is connected.
Have you tried to run Rsdlite 5.6?
---------- Post added at 03:05 PM ---------- Previous post was at 02:55 PM ----------
Also, run rsdlite as administrator: right click, properties, compatiblty, run as admin, apply

Its new, i7 , 8gb ram ..... I downloaded those drivers u gave me ....i tried 3 RSD

Tried Rsdlite 5.6 and running as administrator?
---------- Post added at 03:24 PM ---------- Previous post was at 03:21 PM ----------
1. start RSDLite 5.6 (have rsdlite on desktop)
2. turn phone off
3. press and hold the volume down and power button at the same time on the phone. The fastboot menu will appear.
4. plug your bionic into your computer with the cable.
5. Click on RSDLite, you should see your phone listed.
6. click on your phone to highlight.
7. click on "..." symbol.
8. navigate to the 5.9.902 file location and select that file.
9. select uncompress and start flashing.

I did how you wrote untill RSD start....yes its running as admin and my phone doesnt show on list ..... nothing like that ....i know how to do it, my biggest problem is that in Fastboot mode my phone is invisible for PC :/ and i have win 7 32bit....

I switched USB cables.... LOL !!! Motorola supply ppl with bad cables ?:| I used one from Blackberry and it works on it .... OMG !!! flashing and i will see where i finish.....
P.S
I switched .exe file compability mode to Windows XP SP 2 and i chose to run it all the time as Admin....
p.s
its stuck on 2/22.....LOL im still waiting ...

How long it been stuck?

It fails on 2/22 ....Failed flashing process. Failed flashing 2/22 reboot-bootloader > No arrival message notification, phone disconnected.....

Ok. Stop. We dont want the battery to die.
You either need to use a different pc or moto-fastboot the images.
I can help with the moto-fastboot if ya have time.

yes i do have time, how it works ?

You have google talk on your pc? can you get it? Pm your user name if ya can/do.

[Q] Windows 8.1 won't recognise my device in download mode

So I am currently in the process of trying to flash a recovery drive onto my samsung galaxy mini however whenever i connect my phone in download mode my computer says windows can not recognise the device however it recognises my device when in all other modes. I have tried re installing drivers factory and resetting my phone several times. Please help if you know how! Thanks
P.s. I have attached a picture of the message i am given.

So maybe you don't install driver phone yet , right ?
---------- Post added at 04:06 PM ---------- Previous post was at 04:05 PM ----------
Or should maybe try restart your computer to give all drivers read properly into your system computer .

thanks but didn't help
Thanks for the advice but it didn't work, p.s. what do you mean about not installing drivers yet, they are required
Also the problem is that my computer detects the phone but can't read it essentially

[Q] s5830 problem usb in download mode

Hi Friends
I have Samsung Galaxy Ace GT-S5830 I try to install over 15 custom ROMs and I try to devolope a ROMs and I succed but now I need to return to stock ROM I install the Samsung Kies ,I download 'odin v4.42 for s5830' , stock rom from sammobile I shutdown my ace and I hold press home + power + volume down to enter to download mode
I succed to enter to download mode but my pc don't recognize the ace
I try to reinstall Samsung driver from kies
I change the recovery 5.0.2.6 and 6.0.2.6 and twrp recovery olso I found a stock recovery but the the pc can't recognize my ace
olso I try to install some deferent rom but the pc don't recognize my ace
I install a new os win 8.1 win 8 win 7 win xp but the same problem usb device not recognized
the phone work with custom ROMs normal
the usb cable is the original one
I try usb 3.0 and usb 2.0
I try from laptop and desktop
in Linux (Ubuntu) I try to install heimdall and when I try to detect device it said detected but I don't know how to use heimdall
so any one help me
& thank you first

s5830 problem usb in download mode
ilyes1994 said:
Hi Friends
I have Samsung Galaxy Ace GT-S5830 I try to install over 15 custom ROMs and I try to devolope a ROMs and I succed but now I need to return to stock ROM I install the Samsung Kies ,I download 'odin v4.42 for s5830' , stock rom from sammobile I shutdown my ace and I hold press home + power + volume down to enter to download mode
I succed to enter to download mode but my pc don't recognize the ace
I try to reinstall Samsung driver from kies
I change the recovery 5.0.2.6 and 6.0.2.6 and twrp recovery olso I found a stock recovery but the the pc can't recognize my ace
olso I try to install some deferent rom but the pc don't recognize my ace
I install a new os win 8.1 win 8 win 7 win xp but the same problem usb device not recognized
the phone work with custom ROMs normal
the usb cable is the original one
I try usb 3.0 and usb 2.0
I try from laptop and desktop
in Linux (Ubuntu) I try to install heimdall and when I try to detect device it said detected but I don't know how to use heimdall
so any one help me
& thank you first
Click to expand...
Click to collapse
hi, try to change pc or change usb cable.
daniga74

Well you will need to updated the drivers normally. This is the problem with the drivers.
Sent from my Nexus S using XDA Premium 4 mobile app
---------- Post added at 06:11 PM ---------- Previous post was at 06:10 PM ----------
You will need to download the normal android drivers or you can try PDAnet to connect your device to your PC.
if helped click thanks
Sent from my Nexus S using XDA Premium 4 mobile app

ilyes1994 said:
Hi Friends
I have Samsung Galaxy Ace GT-S5830 I try to install over 15 custom ROMs and I try to devolope a ROMs and I succed but now I need to return to stock ROM I install the Samsung Kies ,I download 'odin v4.42 for s5830' , stock rom from sammobile I shutdown my ace and I hold press home + power + volume down to enter to download mode
I succed to enter to download mode but my pc don't recognize the ace
I try to reinstall Samsung driver from kies
I change the recovery 5.0.2.6 and 6.0.2.6 and twrp recovery olso I found a stock recovery but the the pc can't recognize my ace
olso I try to install some deferent rom but the pc don't recognize my ace
I install a new os win 8.1 win 8 win 7 win xp but the same problem usb device not recognized
the phone work with custom ROMs normal
the usb cable is the original one
I try usb 3.0 and usb 2.0
I try from laptop and desktop
in Linux (Ubuntu) I try to install heimdall and when I try to detect device it said detected but I don't know how to use heimdall
so any one help me
& thank you first
Click to expand...
Click to collapse
Alright make sure Samsung Kies is turned off / not running in the background while Odin is opened. Another way is that try Universal Drivers or Naked Drivers. Here they are - http://forum.xda-developers.com/goo...nt/adb-fb-apx-driver-universal-naked-t2513339
All the best!

Help to roll back to stock and lock back the bootloder

How to roll back to stock and lock back the bootloder. I have twrp olso. Thanx

https://developer.razer.com/razer-phone-dev-tools/factory-images/

https://developer.razer.com/razer-p...4.2122080926.1571867272-1613787836.1571867272

It's like there's instructions already.

I am able to make a reset and get into download mode by adb. When the device is on. But when I give the update command in adb. He tells me he's waiting on the phone. As if he didn't recognize a connected device. What's the malfunction?

You need to point device manager to the same android driver while phone is in bootloader mode. Their flash all script uses fastboot, which is the executable it uses to talk to the phone while in fastboot/bootloader mode. Your PC sees it as a different device while in this mode.
---------- Post added at 02:46 PM ---------- Previous post was at 02:44 PM ----------
avichay said:
I am able to make a reset and get into download mode by adb. When the device is on. But when I give the update command in adb. He tells me he's waiting on the phone. As if he didn't recognize a connected device. What's the malfunction?
Click to expand...
Click to collapse
You also need to install the same driver for adb while phone is on. You may also see a prompt on phone to trust the PC it's connected to.