So I have searched and found nothing on it except LTE settings...well as of now, I don't LTE in my area. With that being said..
I have an HTC Vivid and I am running the current MIUI ROM released for it. I'm requesting the original AT&T APN settings for this device. I don't know how many there are, much less what their respective settings are. Any help at all would be appreciated!
Check the general knowledge thread. It has a list of all the apns.
http://forum.xda-developers.com/showthread.php?t=1425013
Related
In need of help again, very sorry.
using froyo 2.2 on an ATT vers Nexus One.
Problem:
So with using the default browser (mozilla?), as well as Dolphin HD browser...there are a few important sites I cannot load (no matter what) via 3g or 2G data.
It tries to load at first but just quickly stops leaving me at a blank page.
However, if i switch to my wi-fi network, these same problem pages will load without issue. Not a problem.
But switch back to mobile data 2G or 3G...these sites will not load.
All other websites I visit (so far) load fine either wifi or 3g/2g, it's just some specific ones. This is a constant and consistent problem with specific websites.
The sites are
- hotmail
- ebay mobile
* but I'm sure I'd find others.
So it's strange...perhaps this is best asked in the dev section?
I have no idea what to search on this problem (here or google).
It's as if something is out of whack at the browser end, like it's reading some form data that I could fix/edit/delete and resolve this problem. Or perhaps it's some security bug/issue...
Either way, I need to get this fixed so I can check hotmail if I need to while on the road, ....problem is I don't know where or what to do here for a fix. Any suggestions?
Certain config file, or the like I can edit or del for a fix?
I've DEL the cache, form data, cookies, etc...everything. No fix.
Can the default browser on the nexus one be uninstalled/reinstalled?
I know I can uninstall/reinstall Dolphin HD, I'll try that.
I also like the default browser though...any way this can be fixed?
man, this problem is getting worse...and it's happening in other browsers too.
dolphin and opera.
it's as if there's a glitch that occurs if you once viewed a site via wifi...then when using 3G it has hang ups (blank load screen).
Is there anyone who might have an answer here?
Can the built in browser be reinstalled (froyo 2.2) to try and fix?
Works fine for me.
?
I'm sure it does, and that's great. Most pages load fine too here...but...
As mentioned it seems to be more of an odd or rare "glitch" here...like something that goes awry under special circumstances (won't load a certain page under 3g/2g data - but will load same page using my wifi).
Now it's happening with facebook in default browser and dolphin. Seems to be happening due to usage at home (wifi)...then accessing same via 3G/2G (not at home). Some hiccup...causing a no load scenario with cell data (no problems via wifi though).
Can we please only reply if this is something you also encountered or may know what's going on here?
I'm no expert but the sites you described seem to be https sites, a secured version of normal webpages. And you're trying to acces those sites through an unsecured data connection 3G/2G.
So I don't know exactly what https does but I assume it won't allow you to send/receive your data over an unencrypted network.
But as for your hotmail problem, you can configure your stock e-mail app to receive your hotmails.
This definitely is the wrong section to post this, you might get a lot of flack for posting here!
Try installing a new rom, your issues are not normal. Try Enom's newest -- it has a stable kernel, and offers perhaps an updated apn file. Short of that, you need to call your cellphone provider, and find out the apn settings from them (double check), and/or why they are restricting access...
I understand your frustration with not getting a response in the Q&A section, but the dev section is for devs and testers. Maybe look at what distribution of froyo you are running (cyanogen? enom? kang-o-rama? leo?) and post in their respective threads. and if this is just a stock updated froyo, you definitely need to call your cellphone provider.
Good luck!
Also, note the rules: http://forum.xda-developers.com/showthread.php?t=614062
verify your APN settings. Same thing happened to me & proper APN settings fixed it.
Not sure the proper ones for AT&T, however.
edit: make sure to clear anything that ought to be cleared -- an asterisk isn't the same as cleared
Delete your Proxy IP and Port under APN settings and try to reload the page.
As mentioned above, 1) this is wrong section, 2) if you're on a custom ROM - try another ROM, and if you're on stock FRF91 or any custom ROM does the same - then it's definitely a problem with your cellular provider and/or your APN settings.
It may pay to check that it's not your carrier.
Can you access those sites with your SIM in another phone?
Merged threads ... please do not create duplicate threads as it clutters up the forum and invites flamming/trolling responses.
Regards,
Hey everyone!
I'm using Incubus' Froyo build release 16, and it's working great! Besides a few problems with USB mass storage and tethering, I'm really happy to have jumped from WinMo to Android.
I need help with the APN settings. There's the default T-Mobile APN on there that's already selected by default. It's configured as default, supl (which I don't have a clue what it is), and mms. Data, SMS and calls all work fine, but I'd like to be able to use MMS and configure the default APN to Bell's APNs.
No luck so far, as it seems changing the MNC to something different than what the OS reports invalidates the new APN, thus hiding it from the list.
If someone's been able to get this right, please help me. The settings I'm using are from the following thread: http://forum.xda-developers.com/showthread.php?t=660824
Thanks !
I am having the same issue with fresh froyo. Anyone have any luck?
Hello to all!
I just recently picked up the above device and for what I spent it's a great little tab! I've also looked at all the great work you guys have done for this device!
After some research, I just installed the Initial Contact ROM (what a great effort by its author!) and have it overclocked to 1.2 and have no issues at all...so far. My question pertains to Sprint ID and Sprint Zone. Both worked great when the tab was stock (or stock with an OC kernel). I realize this is considered by most to be "bloatware" and they were removed in the ROM. However, I wanted to retain some semblance of the stock functionality and wanted those items back. After some more research, I installed SprintZone.apk and W_installer.apk. Both Sprint ID and Sprint Zone now work...and they don't work.
Sprint Zone throws a "Server Error:500" when I click on My Usage (which was very handy for a very quick glance at data usage) and if I try to click on Get New in Sprint ID to browse their IDs I get "Oops...An unexpected server error has occurred. Please try again".
I was wondering if I was supposed to install any of the other stock apks or if these features just won't work with a cooked ROM/kernel.
Any assistance or suggestion is appreciated!!!
Hi, as the title of the thread says I am trying to figure out how to edit certain settings via build.prop, rather than ##PROGRAM.
This is because of two things: I flashed my bionic to page plus, using the stock rom, then I installed Carbon ROM in slot1. To make 3G operate correctly, you have to change certain settings using ##PROGRAM. The stock rom works great after using the program menu. Unfortunately, the Carbon Rom, although fantastic, does not have this menu.
One of the settings is to change Sim type to 3G. The other is to set lte bppanic to disable. Then disable class 1 and class 2 apns.
If anyone knows how to do this, I would be thrilled, as would other Page Plus users, I imagine. Thanks.
Bump
This may be off by a long shot, but relating to radios..
http://www.droidrzr.com/index.php?/topic/22660-help-pls
typed on my Bionic
Hi, I think that is the right direction. However, so far I cannot find out how to change sim type to 3g or set lte bppanic to disable using a database.
There are similar "name" inputs there, like network mode, etc, but nothing indicating those exact settings. I wonder if I find the settings under the stock rom, can i import them into carbon? Or are they motorola-rom-specific?
I think that these are actually important questions for flashed users, and we will see this becoming more and more of an issue as 3G phones become obsolete, and the only way for a Page Plus or other Verizon MVNO user to have a workable smartphone is to flash a 4G one,
On the Bionic (and I imagine on other models), the only option for now will be the stock rom; any rom without access to the ##PROGRAM menu will be left short as far as advanced network settings goes. Of course, I think this might vary depending on how you flashed in the first place. I used a free tutorial that was quite simple.
chrisp6825 said:
This may be off by a long shot, but relating to radios..
http://www.droidrzr.com/index.php?/topic/22660-help-pls
typed on my Bionic
Click to expand...
Click to collapse
I honestly couldn't input much on this, as I've never had to dabble with this area ( well just once, quite a long time ago), but I'd imagine you could check out the data bases ( maybe take a "snapshot" or copy/download it) from a stock rom, make your changes using that ##program menu, then compare the new/changed database to the prior one.
That would be a quick way to detect if any values are being affected there, and where. Then you may as well check if those values exist on other roms, and try them out. Couldn't hurt, with safestrap/recovery backups and all.
typed on my Bionic
I believe that you should check out the setup for page plus on howard forums. It goes thru the changes to make the bionic 3g and turn off 4g completely. But the links to the apps and basic principles should still apply. Good luck, if you can't find it let me know. I'll send you a link.
Cruzin' tha Galaxy SIII via Obsessed Rom / "INAPPROPRIATE" Kernel
I finally got around to installing the Lollipop OTA update yesterday and I've been going through some articles looking for new features. One awesome-looking feature is the guest user feature. The only problem is that I can't seem to find a menu item for this in the settings, nor is there the user icon next to the settings icon in the notification tray. Am I missing something or is this not a feature that is included in the Sprint version?
Perhaps a more relevant question would be, for those of you that have lollipop installed on your Sprint HTC One, do you have access to the guest users feature?
A simple yes by at least one person would let me know that it is a problem with my phone and not an oversight by Sprint.
Thanks!
I just talked to Sprint customer service and I was assured that the user account feature is supposed to be in this release. I was told to go to Settings -> Device -> Users. Unfortunately, there is no Device menu in Settings on my phone. Can some of you respond if you are seeing the same issue? Sprint is opening a ticket but I'd like to tell them that this isn't just affecting me, if that is the case.
I'll keep everyone updated.
Same deal here. I just installed the update and I can't find the multi-users feature anywhere. I have the M8 HK Edition
HTC does not include multiuser on any sense Rom. It's is included on the GE edition and u can use it in any lollipop Aosp and some KK Aosp toms.