So i was on FDE kernel trying to install FDE +2 ROM
and it didnt work so i flashed it to alfs8a GDX kernel and after that i turned it on but nothing stuck on alfs8 boot image....so i took the battery out ,put it back in and nothing....cant turn it on....can't flash...cant connect phone
(battery is near end....)
anyway Is there a possibility for my phone to be hard bricked?
I have 11W19
PCC(repair phone) is unable to procced with ......
HELP
what about seus have u tried it.?
8cpaiw said:
So i was on FDE kernel trying to install FDE +2 ROM
and it didnt work so i flashed it to alfs8a GDX kernel and after that i turned it on but nothing stuck on alfs8 boot image....so i took the battery out ,put it back in and nothing....cant turn it on....can't flash...cant connect phone
(battery is near end....)
anyway Is there a possibility for my phone to be hard bricked?
I have 11W19
PCC(repair phone) is unable to procced with ......
HELP
Click to expand...
Click to collapse
Firstly , whenever you flash any ROM or any kernel , you should ALWAYS make sure battery is more than 50%
Since you can see the boot animation , so you have a soft brick and NOT a hard brick.
First , you need to charge your battery.
I'm not sure , but maybe connect to your charger and turn on your phone till the green LED lights up.
Leave it like that for 2 hours so that the battery charges
Then try to fix it using flash tool/PCC/SEUS
1.I have some problems with my charger
2.I cant see bootanimation
3.I tried with all kinds of repair programs....(flashtool,PCC,SEUS....)
4.No led light,no vibrate no nothing
5.Today,in school i will ask my friends to borrow me charger so i will try that
but few hours ago i accidently safetly removed ADB sony ericcson drive....or something like that
8cpaiw said:
1.I have some problems with my charger
2.I cant see bootanimation
3.I tried with all kinds of repair programs....(flashtool,PCC,SEUS....)
4.No led light,no vibrate no nothing
5.Today,in school i will ask my friends to borrow me charger so i will try that
Click to expand...
Click to collapse
Might be because of low battery.
As I said , charge your phone and then after two hours , repair with the above mentioned tools
Will try it Thanks
Related
hi. i have got a s advance rom aosp 4.4.2, dual boot.I wanted to call a person but the phone froze. I removed the battery but then it won't turn on, into recovery and into download
how i unbrick the phone ?? thanks
DVDandroid said:
hi. i have got a s advance rom aosp 4.4.2, dual boot.I wanted to call a person but the phone froze. I removed the battery but then it won't turn on, into recovery and into download
how i unbrick the phone ?? thanks
Click to expand...
Click to collapse
You cant go to Download Mode or Recovery Mode?
no i can't
Try to remove your battery for 10 minutes, then put the battery in your phone again and connect your phone to the socket for 10 minutes ... then try Download Mode again ... If there is no response at all, your phone is probably hard-bricked
already tried ....i try again
It is charged?
nothing .. it does not even appear the level of charge .. I have to take care even if you root ??
DVDandroid said:
nothing .. it does not even appear the level of charge .. I have to take care even if you root ??
Click to expand...
Click to collapse
Maybe your battery is demaged... If you have someone with I9070 - try to use its battery.
nothing.. i will make a usb jig to enter in download mode
edit: the usb is not working. phone sent for repair
Hello there
I was using my n7000 normally without any isseu. I dont have root or nothing , all I remember is that one time since I bought it I flashed official JB using odin and thats it.
I was using and the battery was 20% , I connect it to charge and It was charging normally.
then I went back to use it and It was stock on boot screen Note N7000 and its very hot.
I pulled the battery out and try to start it but it didnt start! , I tried to accses download mode or recovery mode but I cant reach them! I let the device to cool down .. and till now I cant start it !
please help me
First thing to try is charge the battery externally or use a battery are sure it's charged and try to power on, or get into once of the factory modes.
I tried another battery which is fully charged .. It didn't work ..
Hello:
Recently reflash CM ROM and was working fine. Then I noticed that the missing of Google APKs, so without any wipe, I flash gapps from zip copied in microsd card.
Then on reboot, it loops in the boot animation for more than 10 min (I was attending a patient, I'm doctor). I removed the battery several times and the same thing happened until it stopped power on.
I did the battery trick many times, but did not turn on anymore. All that happens is that when I put the charger gives me the green LED d that the battery is charged.
I went to a workshop cel and they said it was damaged and I need to recopy the bootloader via MEDUSA ( JTAG ) . But no, it didn't worked at all. Then they said that maybe is the power button problem (but it don't turn on with battery trick !!!!)
I am very sad about this and then other technician told me that if after JTAG not raised , then it has no solution for my cell .:crying:
- Is my cel definitely brick ?
- Anyone know what to do to get it back ?
- It is true that after JTAG that doesn't work anymore, the cel definitely is broke?
Please, help me....
Note: The PC don't recognize the phone using USB cable...
Hi
This morning i charge my phone full. And try to trought MiPphone install a rom. Now i cant turn it on, no recovery, no fastbooth. When i put it in charge it doesent turn the light that he is chargin. I press bottons and hold to enter in recovery and to fastbooth and noting. Please tell me is posiblle to fix and how! ((((
My firends, plese help meee :'((((
I think that is impossibile that it don't turn on in all mode...maybe you had a low battery level when you flash the rom?
simoneluconi said:
I think that is impossibile that it don't turn on in all mode...maybe you had a low battery level when you flash the rom?
Click to expand...
Click to collapse
He have so much battery... :'(
maybe you did the wrong thing in the wrong moment, the phone broke while you were updating. Or try with a different charger
wavexda said:
Hi
This morning i charge my phone full. And try to trought MiPphone install a rom. Now i cant turn it on, no recovery, no fastbooth. When i put it in charge it doesent turn the light that he is chargin. I press bottons and hold to enter in recovery and to fastbooth and noting. Please tell me is posiblle to fix and how! ((((
My firends, plese help meee :'((((
Click to expand...
Click to collapse
if charging doesn't help there is a thread on miui forum but it requires opening the phone(if it's in warranty don't)
quote me if u want the link
anuraag122 said:
if charging doesn't help there is a thread on miui forum but it requires opening the phone(if it's in warranty don't)
quote me if u want the link
Click to expand...
Click to collapse
Thx my firend. Yes I know and I do that. Here is what i posted after wen i finish that method:
After brick my MI3, I use the methodr to fix my phone with wire. I open MI3, put wire on test points and tray to FLASH. But I never finish flash. Then i remove the wire and I make Flash without WIRE
After flash, I have 7 local disk in my computer from MI3. Two local disk are 63.9 MB and they are just free 11.5MB, and other 5 local disk want to do a format disk.
When I back battery I can't turn on my phone, and wont charge. If I put USB in him he will have the same local disk like without battery.What to do?
Now I can do a Flash with, and witout battery. But they are the same problem. PC recognize MI3 but it wont turn ON, won't charge.
What to do now?
Click to expand...
Click to collapse
Service center
in any condition fastboot mode should be open. if not, only possibility low battery. or else service center
try ADB flash..search in google..it may help..if ur pc recognizes ur phone.
Unbrick Completely Dead Mi3 With No Fastboot/Recovery http://en.miui.com/thread-73348-1-1.html
credits to @subhrajitnath
Hello.
Short problem review. My brother used some custom rom for a while. Today he tried to install CM12,1 . He installed it by Cwm recovery. Everythink looks fine. After first start it was imposible even to unlock phone (all the time some programs stoped working...). After hard reset phone not turn on at all. It shows just SONY logo then 4seconds black screen and phone auto restart. And it never end. Is it posible that he break this phone? P.S. just one option works - fastboot mode (blue led). Sorry for poor english.
Maybe someone can give me some hints or tips what to do?
Frozen258 said:
Hello.
Short problem review. My brother used some custom rom for a while. Today he tried to install CM12,1 . He installed it by Cwm recovery. Everythink looks fine. After first start it was imposible even to unlock phone (all the time some programs stoped working...). After hard reset phone not turn on at all. It shows just SONY logo then 4seconds black screen and phone auto restart. And it never end. Is it posible that he break this phone? P.S. just one option works - fastboot mode (blue led). Sorry for poor english.
Maybe someone can give me some hints or tips what to do?
Click to expand...
Click to collapse
1. You can flash boot.img of any rom for yuga (i prefer boot.img of slimlp) through fastboot mod and after that go to recovery and install any rom.
2. You can flash stock if nothing work through flashmod.
Ess Arr said:
1. You can flash boot.img of any rom for yuga (i prefer boot.img of slimlp) through fastboot mod and after that go to recovery and install any rom.
2. You can flash stock if nothing work through flashmod.
Click to expand...
Click to collapse
i tryied to flash boot.img from this http://forum.xda-developers.com/xperia-z/orig-development/rom-slimlp-yuga-t3004439 but nothing changed
Frozen258 said:
i tryied to flash boot.img from this http://forum.xda-developers.com/xperia-z/orig-development/rom-slimlp-yuga-t3004439 but nothing changed
Click to expand...
Click to collapse
Flash boot.img again as "kernel" not as system through flashtool and restart the phone. When sony logo appears press vol up or down constantly.
Try to reprogram ?
Androidzkie said:
Try to reprogram
Click to expand...
Click to collapse
can you tell me more about this? P.S. when i connect to the charger it restarting all the time and not charging
Ess Arr said:
Flash boot.img again as "kernel" not as system through flashtool and restart the phone. When sony logo appears press vol up or down constantly.
Click to expand...
Click to collapse
after restart i see sony logo and red led on corner and mili second green led (on this it should open recovery mode, but phone restart faster and i can't get on it)
could it be battery problem (dead battery)? the reason for flashing new rom was that this phone shutdown at 82% of batery remaining. Factory settings reset didn't helped so we installed other custom rom and now it is dead. Now without charger it dont start at all ( 3 times red led and thats all). If i leave it to charge but it restart and restart.
Frozen258 said:
could it be battery problem (dead battery)? the reason for flashing new rom was that this phone shutdown at 82% of batery remaining. Factory settings reset didn't helped so we installed other custom rom and now it is dead. Now without charger it dont start at all ( 3 times red led and thats all). If i leave it to charge but it restart and restart.
Click to expand...
Click to collapse
Yep bro i seems to be like a hardware issue. Other wise try to flash the stock rom.
---------- Post added at 04:47 PM ---------- Previous post was at 04:41 PM ----------
Frozen258 said:
could it be battery problem (dead battery)? the reason for flashing new rom was that this phone shutdown at 82% of batery remaining. Factory settings reset didn't helped so we installed other custom rom and now it is dead. Now without charger it dont start at all ( 3 times red led and thats all). If i leave it to charge but it restart and restart.
Click to expand...
Click to collapse
Yep bro i seems to be like a hardware issue. Other wise try to flash the stock rom.
thank you guys for help. Problem was battery. But i have another now... while i was changing battery i crashed my xperia screen :/ . Is it worth to buy new one or phone is too old to repair it? Touch now works only on down corner but LCD looks fine.