Hello:
Recently reflash CM ROM and was working fine. Then I noticed that the missing of Google APKs, so without any wipe, I flash gapps from zip copied in microsd card.
Then on reboot, it loops in the boot animation for more than 10 min (I was attending a patient, I'm doctor). I removed the battery several times and the same thing happened until it stopped power on.
I did the battery trick many times, but did not turn on anymore. All that happens is that when I put the charger gives me the green LED d that the battery is charged.
I went to a workshop cel and they said it was damaged and I need to recopy the bootloader via MEDUSA ( JTAG ) . But no, it didn't worked at all. Then they said that maybe is the power button problem (but it don't turn on with battery trick !!!!)
I am very sad about this and then other technician told me that if after JTAG not raised , then it has no solution for my cell .:crying:
- Is my cel definitely brick ?
- Anyone know what to do to get it back ?
- It is true that after JTAG that doesn't work anymore, the cel definitely is broke?
Please, help me....
Note: The PC don't recognize the phone using USB cable...
Related
I flashed the Tmo stock rom using ODIN on my bell vibrant...everything else seems to be fine but as soon as i plug in the USB cable...the phone shuts down :S:S
i ran odin a second time in case it didnt flash properly...same thing still.
i can use the phone for like half a sec before it powers off and then the charging battery screen comes up..the one u get if ur chargin ur phone when its off.
HELP!?!?!?
im still on the stock rom but i need to put the ROM on the SD card
even in recovery it does this...i installed Clockwork recovery and tried to mount from there..but as soon as i plug in the cable it shut down.
ive tried diff cables and diff computers...i dont know what else it could b :S:S
ANY HELP IS APPRECIATED!!
Got the same issue with my first SGS, got it replaced since it's an hardware failure issue...and you can't do squat after!
I have the same freaking problem, some one no a fix?
Hi guys,
I have a problem.. my phone won't connect on the computer or with charger.
If i restart it, it just displays the battery and the spinner for a few seconds and then the screen goes black again and the process repeats over and over. I'm able though to get in download mode and flush successfully a stock firmware with odin.
As long as i keep it plugged on the computer it can connect with kies and recharge, once i unplug it won't connect again..
Can anybody help?
Thanks in advance.
well the fact that you can flash thru odin and connect with kies ect suggests its not a hardware fault...
perhaps you could try a (stock) firmware that contains all 3 files. and maybe flash it using pit and repartition... sounds like some sort of bug in the rom, confusing the phone when connected..........
just to make sure.. you have the latest drivers installed right ??
I've flushed JPO stock firmware, everything now works fine but it won't boot unless i connect it to the charger. It shows empty battery..
very strange..... are you running CWM if so boot into recovery and wipe battery stats.. then try charging the phone for a bit whilst it is switched off...
if it still fails to work properly then i must be wrong and it could be some sort of hardware fault... only samsung can repair that (unless you have insurance for a straight swap)
I wiped the battery stats but with no luck.. it didn't work.. I don't have insurance.. anyway, thanks for your help.
All i can say is that i have seen similar problems posted .Phone not working unless charger plugged in almost as if phone has lost the battery .
Dont know if problem was solved but a thought would be bad battery connections .
jje
So i was on FDE kernel trying to install FDE +2 ROM
and it didnt work so i flashed it to alfs8a GDX kernel and after that i turned it on but nothing stuck on alfs8 boot image....so i took the battery out ,put it back in and nothing....cant turn it on....can't flash...cant connect phone
(battery is near end....)
anyway Is there a possibility for my phone to be hard bricked?
I have 11W19
PCC(repair phone) is unable to procced with ......
HELP
what about seus have u tried it.?
8cpaiw said:
So i was on FDE kernel trying to install FDE +2 ROM
and it didnt work so i flashed it to alfs8a GDX kernel and after that i turned it on but nothing stuck on alfs8 boot image....so i took the battery out ,put it back in and nothing....cant turn it on....can't flash...cant connect phone
(battery is near end....)
anyway Is there a possibility for my phone to be hard bricked?
I have 11W19
PCC(repair phone) is unable to procced with ......
HELP
Click to expand...
Click to collapse
Firstly , whenever you flash any ROM or any kernel , you should ALWAYS make sure battery is more than 50%
Since you can see the boot animation , so you have a soft brick and NOT a hard brick.
First , you need to charge your battery.
I'm not sure , but maybe connect to your charger and turn on your phone till the green LED lights up.
Leave it like that for 2 hours so that the battery charges
Then try to fix it using flash tool/PCC/SEUS
1.I have some problems with my charger
2.I cant see bootanimation
3.I tried with all kinds of repair programs....(flashtool,PCC,SEUS....)
4.No led light,no vibrate no nothing
5.Today,in school i will ask my friends to borrow me charger so i will try that
but few hours ago i accidently safetly removed ADB sony ericcson drive....or something like that
8cpaiw said:
1.I have some problems with my charger
2.I cant see bootanimation
3.I tried with all kinds of repair programs....(flashtool,PCC,SEUS....)
4.No led light,no vibrate no nothing
5.Today,in school i will ask my friends to borrow me charger so i will try that
Click to expand...
Click to collapse
Might be because of low battery.
As I said , charge your phone and then after two hours , repair with the above mentioned tools
Will try it Thanks
Yesterday after unbricked my note from lpy brick (for the 5th time), I tried to flash a stock rom with a pit file (found somewhere on xda, special 16gb pit file for restoring bricked device) but the flash stuck at the begginning so I unplugged it.
Now my phone is unable to go in Download mode, recovery mode neither normal mode.
The screen stay black whatever I do, I've tried all the combinaison possible...
I tried to put it in charge all the night but now the problem is still here.
Any help appreciated
Phenom2 said:
Yesterday after unbricked my note from lpy brick (for the 5th time), I tried to flash a stock rom with a pit file (found somewhere on xda, special 16gb pit file for restoring bricked device) but the flash stuck at the begginning so I unplugged it.
Now my phone is unable to go in Download mode, recovery mode neither normal mode.
The screen stay black whatever I do, I've tried all the combinaison possible...
I tried to put it in charge all the night but now the problem is still here.
Any help appreciated
Click to expand...
Click to collapse
ur phone still ok but u need do manually ...
1st-take out ur battery
2nd-put it back
3rd-Put your Galaxy Note into download mode by holding down Volume Down, Center button, and Power button together for about 10 seconds.
after that press volume up , then connect ur device to odin , flash new fresh rom without pit file
Your phone seems to be totally unresponsive; that sounds like the ultimate hard brick to me.
Take it to the nearest service centre.
USB jig
Did you try putting your phone to download using USB jig ? There are many articles relating to that . Sometimes the phone may not charged when its bricked . So get it charged from somewhere else , or may be from your friend who has note and try using USB jig . It might work , no guarantee , try your luck , else be ready to spend almost half what you paid for your phone to change the motherboard !
ichson said:
ur phone still ok but u need do manually ...
1st-take out ur battery
2nd-put it back
3rd-Put your Galaxy Note into download mode by holding down Volume Down, Center button, and Power button together for about 10 seconds.
after that press volume up , then connect ur device to odin , flash new fresh rom without pit file
Click to expand...
Click to collapse
Already tried... Odin doesn't show me anything... neither adb nor windows..
chasmodo said:
Your phone seems to be totally unresponsive; that sounds like the ultimate hard brick to me.
Take it to the nearest service centre.
Click to expand...
Click to collapse
I have unbricked all my brickeds phones, I think there's always a solution for unbricking it, but if I can't I will take it to SSC
Archangel919 said:
Did you try putting your phone to download using USB jig ? There are many articles relating to that . Sometimes the phone may not charged when its bricked . So get it charged from somewhere else , or may be from your friend who has note and try using USB jig . It might work , no guarantee , try your luck , else be ready to spend almost half what you paid for your phone to change the motherboard !
Click to expand...
Click to collapse
I don't think that the problem is battery, It was 55% yesterday evening, but I haven't friend with a Gnote
I haven't a JIG but I will try to make one if I can find a 300K resistor
Can I find a 300K resistor into a old none working device ? (Like a old radio, tv, telecommand ?)
Phenom2 said:
Now my phone is unable to go in Download mode, recovery mode neither normal mode.
The screen stay black whatever I do, I've tried all the combinaison possible...
I tried to put it in charge all the night but now the problem is still here.
Any help appreciated
Click to expand...
Click to collapse
similar type of brick....and the suggestion given by the SSC is better to buy a new mobile since they have to replace the main board....(without warranty)..and cost will be around (Dhs.1150) that is almost half the price of new mobile....
btw i have tried jig also but no luck...
I have the same problem with my galaxy note.
i treid everything no reaction
pls has somebody an idea for me ?
Same problem with me.
Weird, I had a I91000 for a year, flashed everything and never had any problems. Never got close to bricking it.
I did this:
Rooted it with this method: http://forum.xda-developers.com/showthread.php?t=1501719 - OK
Ran again CWM.
I put the latest nightly from CM9. When I started flashing it, it hung. I turned off my cell (no other option, it was stuck), now it won't turn on.
Whoa... What did I do wrong? I admit I was anxious and didn't take the proper care I should've, I was very anxious, but, wow... I wasn't expecting it to be so easily brickable.
Do I have any hope left?
I bought the phone only 3 months ago... The version I had wasn't fast enough so I installed a new rom instead... The rom I installed was even slower so I tried putting another and I accidentally wiped all my data and cause my phone to get into brick mode...
I managed to solve the problem and a vibrant rom is now on my phone...
The problem now is that I want to replace that rom and I found out that every time I connect it to the computer with USB cable or plug it to the wall the phone goes off and a sign of empty battery apears with loading dots...
I tried to switch to a new battery and I realized it's not the problem...
I took the phone to a special lab to fix it and they told me they won't fix it cause there is a component inside that handeling with it may cause the phone to totally die...
I don't know who to turn to...
Please help!
search for unbrickable mode on search box, but i dont really prefer that way if hardware faulty involved.
Can you get into download mode? Are you on Jelly Bean? We need more informations. If download mode work you should try to flash a stock rom via Odin.